Tried installing pixel experience 13 on my pixel 2. Followed every step to the letter. It failed to install so I rebooted but now the phone is stuck at google logo. I tried earlier too and it failed but booted again into already installed version.
Now I would have tried to trouble shoot via recovery but USB Debugging is disabled and neither my pc nor Adb recognises any devices
dastaan007 said:
Tried installing pixel experience 13 on my pixel 2. Followed every step to the letter. It failed to install so I rebooted but now the phone is stuck at google logo. I tried earlier too and it failed but booted again into already installed version.
Now I would have tried to trouble shoot via recovery but USB Debugging is disabled and neither my pc nor Adb recognises any devices
Click to expand...
Click to collapse
@dastaan007 Thread closed as duplicate of
Tried installing pixel experience 13 on pixel 2. Stuck on Google logo after restart
Tried installing pixel experience 13 on my pixel 2. Followed every step to the letter. It failed to install so I rebooted but now the phone is stuck at google logo. I tried earlier too and it failed but booted again into already installed...
forum.xda-developers.com
that I've moved from the development section, for which it didn't qualify, to Q&A.
Prior to your next posting, please read all moderator announcements and guidances that are stuck at the top of every forum like
[Mandatory] Development Forum Rules
Rules for Posting in the Development Forum The following are a list of topics that we allow in the development forum [DEV] - Development for any special projects or Apps [ROM] - Custom ROMs [KERNEL] - Custom Kernels [MOD] - Hack & Modifications...
forum.xda-developers.com
and review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Related
Hello Forum
i installed the NOBLEROM1.1_N9_S9_S9P on my galaxy 9 and it worked very well. since today i have a boot loop. 2 seconds after the start, the mobile phone restarts. I installed a backup. without success. as soon as I restore the "data" from the TWRP backup, the boot loop starts. does anyone have an idea how I can find and eliminate the error in "data"?
blair_ said:
Hello Forum
i installed the NOBLEROM1.1_N9_S9_S9P on my galaxy 9 and it worked very well. since today i have a boot loop. 2 seconds after the start, the mobile phone restarts. I installed a backup. without success. as soon as I restore the "data" from the TWRP backup, the boot loop starts. does anyone have an idea how I can find and eliminate the error in "data"?
Click to expand...
Click to collapse
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum
Hi everyone, i have problem with ts 10 head unit, i installed the latest update 22122021 via usb..after finishing the update, now device stuck on logo... How can i enter recovery mode to wipe cache ?
@Man.masr Thread closed as duplicate of
Stuck on logo after installing update
Hi everyone, i have problem with ts 10 head unit, i installed the latest update 22122021 via usb..after finishing the update, now device stuck on logo... How can i enter recovery mode to wipe cache ?
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Hey guys, I recently rooted my stylus 5g and went to install TWRP. I was able to get it to boot to TWRP, but I believe within TWRP I did the flash wrong as now my device is hard bricked. I cannot get it to show the initial logo, get to the bootloader or I think even EDL. I've tried the Lenovo recovery tool and the Moto all-in-one tool, but essentially all I get now is a black screen.
Any input on what I can do to either diagnose and possibly recover my device? I have the original firmware downloaded, but without being able to get to the bootloader, recovery, or even EDL, I'm at a loss as to how to proceed. I did grab a blankflash for the device, but I'm not clear on how to begin to use that to move forward.
Thanks for any advice you can provide.
-Ryan
@dagey Thread closed as duplicate of
Recover bricked moto stylus 5g after flashing TWRP
Hey guys, I recently rooted my stylus 5g and went to install TWRP. I was able to get it to boot to TWRP, but I believe within TWRP I did the flash wrong as now my device is hard bricked. I cannot get it to show the initial logo, get to the...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! You'd initially posted the still open thread in the "Moto G Stylus (2021)" device forum, out of which I've moved it. If you realise that you posted something wrongly just report it, and we're happy to support.
By the way: Usually, I'd even to close the still open thread as even that is a simple duplicate of your post here!
Regards
Oswald Boelcke
Senior Moderator
Hello, I have a small problem with ZTE BLADE A7 2019 phone, I can not get into fastboot, it immediately returns me to the system.. In the settings for the developer, I have enabled OEM unlock.
I tried command like at ,,adb reboot bootloader" ,,adb reboot fastboot"
None of that worked, I tried going to the bootloader in the recovery menu, how else it didn't work either, and it immediately returned me to the system :/ I'm sad that it doesn't work, any ideas please ?
// This is my second post about this, I wanted to rewrite it all, thanks for understanding
Matyas66055 said:
// This is my second post about this, I wanted to rewrite it all, thanks for understanding
Click to expand...
Click to collapse
@Matyas66055 Thread closed as you've already created a subject matter related thread:
zte a7 blade 2019 instant switch to os from fastboot*
Hi, i am loading booting to bootloader from adb with commnad (adb reboot bootloader) this isnt working, only restart :( its instantly switch to normal os, any ideas ?
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5, post only ONCE, post in an already existing thread, and if required edit your thread instead of creating a new one. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Dear All,
Please can someone help me - i have got in a massive problem. I rooted the phone using Magisk - it worked but didn't quite appear as his did in the video -in the sense the app logo didn't change, but I reinstalled Magisk and everything worked fine. I wanted to uninstall a MOD earlier, and had to uninstall Magisk. The phone then seemed to be a lot quicker., so I thought i'll just re-flash it back to stock ROM. I tried to do so and it said (in ODIN mode) (SVB fail) ! vbmeta: Error verifying vbmeta image: HASH_MISMATCH (3)
CUSTOM VB META
VB META S908BXXU2AVG, 51495597R.
If i try and get out of that it just reboots into that screen again. I tried putting in a TWRP.tar file into the AP, and it says "get PIT for MAPPING". I am out of my depth now..........PLEEAASSSSEEEEEE help!
Thanks for reading,
Matthew
MJC1981 said:
Dear All,
Please can someone help me - i have got in a massive problem. I rooted the phone using Magisk - it worked but didn't quite appear as his did in the video -in the sense the app logo didn't change, but I reinstalled Magisk and everything worked fine. I wanted to uninstall a MOD earlier, and had to uninstall Magisk. The phone then seemed to be a lot quicker., so I thought i'll just re-flash it back to stock ROM. I tried to do so and it said (in ODIN mode) (SVB fail) ! vbmeta: Error verifying vbmeta image: HASH_MISMATCH (3)
CUSTOM VB META
VB META S908BXXU2AVG, 51495597R.
If i try and get out of that it just reboots into that screen again. I tried putting in a TWRP.tar file into the AP, and it says "get PIT for MAPPING". I am out of my depth now..........PLEEAASSSSEEEEEE help!
Thanks for reading,
Matthew
Click to expand...
Click to collapse
Hello and good morning, @MJC1981
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to
Samsung Galaxy S22 Ultra
The Samsung Galaxy S22 Ultra is a 6.8" phone with a 3080x1440 resolution display. The Qualcomm Snapdragon 8 Gen 1/Samsung Exynos 2200 chipset is paired with 8/12GB of RAM and 128/256/512GB of storage. The main camera is 108+12+10+10MP and the selfie camera is 40MP. The battery has a 5000mAh...
forum.xda-developers.com
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
go to service now
better to get experience on cheap trashy $100 phones before killing $1300 smartphone
Get Smart Switch for PC from samsung
Connect your device and follow the wizard
Power off the device, let it sit for 30 seconds or so, then start Download Mode again and reflash the firmware with Odin.
Thank you all for your help.