Hi,hope this is the right thread. Has anyone got any experience with the Xtrons UI. Everything works as intended but for some reason the speedometer doesn’t work at all. I’ve tried all options. The gps signal is fine and all other apps show speed but not the speedometer in the ui itself
Hi new member.
Unfortunately no one here has a crystal ball to know what the unit is or even if installed correctly.
First point of contact ifor support is the seller - what do they suggest and what has been tried?
Which threads have been searched to identify the unit, were there no matches?
I mean I wasn’t asking for a crystal ball just maybe if someone had some experience or it was a simple settings option. Glad to see toxic forums are still a thing
Cymro14 said:
I mean I wasn’t asking for a crystal ball just maybe if someone had some experience or it was a simple settings option. Glad to see toxic forums are still a thing
Click to expand...
Click to collapse
No one nows what a xtrons ix is because it is a made up model, which could be any number of Chinese knockoffs. Anyone taking a few moments to read the forums likely realise that.
Calling toxic is nonsense, perhaps actively participating in community based forum is above your ability - First line of support is seller. But you're here because the seller is useless and you want someone to help with your low cost chinese knockoff.
The forum works by posting detail, no one here can know what the unit is, how it is connected, what the vehicle is. Calling the forums toxic won't get you any closer to solving your problem.
Is the unit MTCD - post Android System information including MCU version.
Also, steps you've tried, tested. If unable to do any of that, there's no hope your problem might be solved.
Sorry as I’m not a senior member on a forum I must struggle with basic communication functions obviously
Cymro14 said:
Sorry as I’m not a senior member on a forum I must struggle with basic communication functions obviously
Click to expand...
Click to collapse
Is the unit MTCD - post Android System information including MCU version.
Related
Hello,
I am new to this forum community. This is actually my first post ever.
I own the cingular 8125. I recently aquired a bluetooth stereo headset, hoping to utilize media options on the go. I bought the Southwing sa505, which seems to be a great product, except for the fact that it will not work with my phone. I have contacted Cingular/att, Southwing, and the HTC people. Everyone knows that I need the A2DP hack, but nobody can tell me where to get it.
I've done my own searching using the various engines, but all I can find are waves and waves of forums-no actual links to any type of file. If you guys can help me resolve my frustration in this matter, then I will become a financial contributor.
I am so tired of dead ends, please try to give me a response, whether you can help me or not.
Thank you for your time,
James Coyle
[email protected]
(503) 929-3498
Welcome to the forum.
Usually people here tell n00bs with such questions to keep searching but since you offered us money...
Just kidding!
Seriously though:
Please read the first page of this thread. You will find a download link, full instructions and even screen shots. Though it is not specific for your device it is for very similar model (just no keyboard) and should work just fine for you. (As far as I know this is the only patch available).
In the future I recommend you post questions specific to your device in the Wizard subsection (that is what your phone is called here).
P.S.
This hack is a ripoff from another phone. No official solution exists which is why any of the companies you contacted couldn't help you.
try this thread
http://forum.xda-developers.com/showthread.php?t=279127&highlight=a2dp
my phone is not work I do not know why
XDA Visitor said:
my phone is not work I do not know why
Click to expand...
Click to collapse
Hello, and welcome to XDA!
You would have the best of luck asking for help in this thread:
> Android Development and Hacking > Android General > 5300mAh 5.5" Bluboo X550 - Review, ROMs, Info, FAQs
Please note, you will have to register for an XDA account to post there. Also, when posting, please be specific as to what the problem is, any modifications that may have got you to where you are (rooting, et cetera), as well as things tried to alleviate the situation.
Hope this helps, and good luck!
I need scheme
9329929 said:
I need scheme
Click to expand...
Click to collapse
Maybe. It could be a hardware issue, but me not knowing what the problem is (it was even mentioned that you "don't know why" the phone isn't working), software is more likely.
Which is why it is beneficial to post your problem in the thread mentioned above. I don't know anything about your device, except what I skimmed through on GSMArena. The people in that thread own that device, and have the best-hand user experience as a result. I don't have electrical schematics of every Android known to man filed away (I'm lucky if I have even one). Other than approaching the company, your fellow users are the best chance at getting that information, if it is indeed a hardware issue (and replacement parts are available).
Please be detailed there. Simply saying the phone "doesn't work" isn't constructive, and helps no one, as it suggests a plethora of possibilities.
Not to be cruel, I wasn't expecting a three word reply which effectively condenses the original post. Asking-for/needing/demanding effortless information/solutions, while someone else does the heavy lifting, is not what XDA Assist is all about. It's about pointing people in the right (I like to say best) direction with the information given. I feel I have done that. With an account now, time to get your feet wet.
Hope this helps.
Well, I think i've annoyed enough people on enough threads to decide to make one dedicated to this issue.
I ordered this product:
http://xtrons.com/pf75m211a-7-andro...irroring-function-obd2-for-mercedes-benz.html
Came with this Firmware: MTCD_GS_V1.49_1 Apr 28th 2016
Torque\Dash Command fail miserably, both applications indicate that bluetooth is NOT ON. They attempt to turn it on only to freeze forever.
I updated the MCU to MTCD_GS_V1.61_1 May 31 2016
Also rooted and installed Malaysk V4 rom.
Still no luck.
I've sent a barrage of emails to the seller both on Ebay and through their official contact info on their site, still no luck.
What steps do we need to take to get this addressed?
To the DEVS, has the issue been identified in code? Is it a inherent problem in hardware or is it ROM related\MCU related?
Would love some answers, I know i'm not the only one experiencing this, plus it would help me determine if I should return this altogether if no FIX is possible...
masri1987 said:
Well, I think i've annoyed enough people on enough threads to decide to make one dedicated to this issue.
I ordered this product:
http://xtrons.com/pf75m211a-7-andro...irroring-function-obd2-for-mercedes-benz.html
Came with this Firmware: MTCD_GS_V1.49_1 Apr 28th 2016
Torque\Dash Command fail miserably, both applications indicate that bluetooth is NOT ON. They attempt to turn it on only to freeze forever.
I updated the MCU to MTCD_GS_V1.61_1 May 31 2016
Also rooted and installed Malaysk V4 rom.
Still no luck.
I've sent a barrage of emails to the seller both on Ebay and through their official contact info on their site, still no luck.
What steps do we need to take to get this addressed?
To the DEVS, has the issue been identified in code? Is it a inherent problem in hardware or is it ROM related\MCU related?
Would love some answers, I know i'm not the only one experiencing this, plus it would help me determine if I should return this altogether if no FIX is possible...
Click to expand...
Click to collapse
This has already been identified in several posts on both this forum as well as manufacturer forums such as forum.carjoying.com
It would appear you did not search before you asked this question. Short answer, its an issue specific to MTCD based units that has already been reported to the manufacturer devs, as well as to Malaysk for his custom ROM, its not an easy fix, they are trying their best to resolve it.
sterod said:
This has already been identified in several posts on both this forum as well as manufacturer forums such as forum.carjoying.com
It would appear you did not search before you asked this question. Short answer, its an issue specific to MTCD based units that has already been reported to the manufacturer devs, as well as to Malaysk for his custom ROM, its not an easy fix, they are trying their best to resolve it.
Click to expand...
Click to collapse
I did see that as well @ Malaysk is aware.
I just don't see any consolidated place where this information is at. There should be a dedicated thread for such a inherent problem with MTCD units.
I have no checked out the forum.carjoying.com, have any links for me to check out?
Also, this is crucial for me because I only have 3 weeks left to return the unit.
As I said, you didn't search. There is already a dedicated thread for this problem here on XDA and in the MTCD section. Yours is redundant.
http://forum.xda-developers.com/and...uestions-development/bluetooth-buggy-t3389500
Here is the joying link.
http://forum.carjoying.com/thread-52-10-lollipop-bluetooth-problems.html
sterod said:
As I said, you didn't search. There is already a dedicated thread for this problem here on XDA and in the MTCD section. Yours is redundant.
http://forum.xda-developers.com/and...uestions-development/bluetooth-buggy-t3389500
Here is the joying link.
http://forum.carjoying.com/thread-52-10-lollipop-bluetooth-problems.html
Click to expand...
Click to collapse
Thank you --
Devs please delete this thread. TY
Hey lads hope you're doing okay. So recently i purchased a Idoing for my 86, i decided to upgrade my headunit but now the problem is that im facing higher resolution(currently at 1280) and my touch resolution is (1080p) and because of that the screen is now huge and cant even calibrate so basically i've looked everywhere else but couldn't find a solution( basically a rookie with basic knowledge). So please if you guys can help me out, that'd be appreciated. Thanks
Is it an FYT device. Post screen shots of Android system info including MCU version
shanygage said:
Hey lads hope you're doing okay. So recently i purchased a Idoing for my 86, i decided to upgrade my headunit but now the problem is that im facing higher resolution(currently at 1280) and my touch resolution is (1080p) and because of that the screen is now huge and cant even calibrate so basically i've looked everywhere else but couldn't find a solution( basically a rookie with basic knowledge). So please if you guys can help me out, that'd be appreciated. Thanks
Click to expand...
Click to collapse
are you saying the android head unit resolution is too high so the rendered UI and text are too small?
If that's the case, in developer setting, you can change the DPI by set minimum height to 480.
Hey thanks for the response. The Idoing send me bunch of files and updated it. And now it fits my headunit perfectly like old. If someone faces the same problem. Let me know I'll share the files with you.
Hi @shanygage ! How did you get in contact with Idoing? via email, aliexpress chat? Cheers!
shanygage said:
Hey thanks for the response. The Idoing send me bunch of files and updated it. And now it fits my headunit perfectly like old. If someone faces the same problem. Let me know I'll share the files with you.
Click to expand...
Click to collapse
Please share with community
Please share the iDoing firmware file
Another joined for free support and left without a trace.
marchnz said:
Another joined for free support and left without a trace.
Click to expand...
Click to collapse
Take solice in the fact it gave you something to complain about. And besides if you want the files, what did the manufacturer say when you contacted them?
ludditefornow said:
Take solice in the fact it gave you something to complain about. And besides if you want the files, what did the manufacturer say when you contacted them?
Click to expand...
Click to collapse
I detect some annoyance between the two of you, but marchnz is right. One post from the OP, then the OP obviously got some nice answer back from the reseller (as marchnz always advises and which the OP already had done without mentioning it in his post), and then nothing at all since that time.
And then another user asks for the firmware as the OP so nicely offered, and then nothing.
So I fully agree with the "Another joined for free support and left without a trace."
Also your : "what did the manufacturer say..." is not fair. He didn't ask for himself. He asked the sharing for the community where other users could use and benefit from it as well. That is where this community is for.
surfer63 said:
I detect some annoyance between the two of you, but marchnz is right. One post from the OP, then the OP obviously got some nice answer back from the reseller (as marchnz always advises and which the OP already had done without mentioning it in his post), and then nothing at all since that time.
So I fully agree with the "Another joined for free support and left without a trace."
Also your : "what did the manufacturer say..." is not fair. He didn't ask for himself. He asked the sharing for the community where other users could use and benefit from it as well. That is where this community is for.
Click to expand...
Click to collapse
If it was marchnz's forum, fair enough. The mods have already warned marchnz about their attitude. Tell me, Surfer what benefit to the forum was it to have marchnz comment on a post from June 12. Really, what possible benefit is there to that? marchnz is as useful as that poster from June 12 as far as I can see.
"What did the manufacturer say" is just putting a mirror up to marchnz's terrible and typical responses to posters.
The marcvhnz tells people to not silo (poster's words not mine) recently yet refuses to respond when people have searched for and still can't find answers yet he knows the answer.
There will always be people who drop in and then leave. That is life. Just like there will always be people who take advantage of situations in life. It can't be stopped.
But the rich thing is that marchnz complains about useless posts. Look at their history, there are plenty of terrible responses.
To make another post when someone leaves without giving the respect, or complaining about someone not typing in English is in fact doing one of the exact things that marchnz compains about.
If my responses bring a mod to sort it out, all the better. Because I'm sure marchnz scares off more potential long term members who come here to learn from wonderfully people like yourself Surfer, than he keeps away 'one hit wonders'.
ludditefornow said:
If it was marchnz's forum, fair enough. The mods have already warned marchnz about their attitude. Tell me, Surfer what benefit to the forum was it to have marchnz comment on a post from June 12. Really, what possible benefit is there to that? marchnz is as useful as that poster from June 12 as far as I can see.
"What did the manufacturer say" is just putting a mirror up to marchnz's terrible and typical responses to posters.
The marcvhnz tells people to not silo (poster's words not mine) recently yet refuses to respond when people have searched for and still can't find answers yet he knows the answer.
There will always be people who drop in and then leave. That is life. Just like there will always be people who take advantage of situations in life. It can't be stopped.
But the rich thing is that marchnz complains about useless posts. Look at their history, there are plenty of terrible responses.
To make another post when someone leaves without giving the respect, or complaining about someone not typing in English is in fact doing one of the exact things that marchnz compains about.
If my responses bring a mod to sort it out, all the better. Because I'm sure marchnz scares off more potential long term members who come here to learn from wonderfully people like yourself Surfer, than he keeps away 'one hit wonders'.
Click to expand...
Click to collapse
It's about getting people to think first, including contacting the owner of the support - the seller. The seller often walks away from that responsibility and they shouldn't. Asking that question helps others if they reply to get a picture of who are the bad sellers and who might be reasonable. That's contributing to the forums. Why that might "scare off" is beyond me - they obviously didn't come here to contribute and expect others will solve their problem at the cost of contributing members.
It's pretty obvious to me at least, those that join simply for free support and leave - they're typically the ones that ask the same questions as "new member".
I'm not a moderator, nor do I wish to become one. But we can shape the forums, and help those that show at least a basic level of interest in contributing.
If asking basic questions "scares off" those that had no interest in at least a small amount of self help, or asking thoughtful questions, does it not then benifit the forums from keeping the noise down and potentially enable those that do contribute to stay and focus on development and not noise.
I.e. your comment is logically fallacious- a false dilemma.
I know I contribute and have written many articles, including those that enabled members like hal and Mal to create upgrades from Android 7 to 8, when previously it was not possible.
I also offer a free recovery service for MTCx devices, world wide.
How have you been contributing? What would you suggest?
If those that do not agree or take issue with posts - the report button is available for that.
I share the new iDoing firmware, include new MCU firmware
KT私板LVDS - Google Drive
drive.google.com
Hope someone can help my joying headunit is only showing in 720p so not widescreen or anything
Shows though headunit reloaded correctly in widescreen and 1080p just wondering if anyone has a fix or a custom carlink apk
Unfortunately, the forum crystal ball doesnt know what you unit is and from the hundreds of made up models and brands, the seller could be selling units of different types, from different factories, despite branding with the same model name.
There are are a small number of active members in these forums, you want to be posting in a way that helps those people help you, they're likely tired of answering the same questions for new users that join, get the answer (often unanswered) and then leave.
Post screenshots from Android system information, including the MCU version when posting questions. Doing this will at least help others help you, or you might find the information has already been posted or discussed here, yourself.
I have a joyingauto 7862 10.1 1920*1200 unit can post a screenshot of the the device info and also what it looks like though carlink app
I'm used to an android ai box only just switched over to the full headunit
Tried searching but couldn't see anywhere
jollyboy1995 said:
I have a joyingauto 7862 10.1 1920*1200 unit can post a screenshot of the the device info and also what it looks like though carlink app
I'm used to an android ai box only just switched over to the full headunit
Tried searching but couldn't see anywhere
Click to expand...
Click to collapse
Update to the latest version of the Joying firmware. It's available on their site and it should fix it.
See attached. Also getting error when trying to update. Using the joying website firmware