P8Max D-703L/D-701L Root Guide
Preparation:
1. Download the Tools for Root here: https://drive.google.com/open?id=0B7q0s3loYhP3bWdfZk1naVVfR0U
2. Extract the content. There are 2 Folders:
Folder 1: P8Max Root Tool: TWRP Recovery.img and ADB/Fastboot tool
Folder 2: Original Recovery.img
3. Download SuperSU from https://download.chainfire.eu/696/supersu/
4. Copy SuperSU to your SD-Card.
Unlock Bootloader:
1. Get your Bootloader Code: https://emui.huawei.com/cn/plugin.php?id=unlock&mod=detail
You have to use the Chinese Site so it will work properly!
Enter your S/N numbern IMEI (You have to use your 1 IMEI number) and the Captcha.
2. Enable Developer Mode and USB-Debugging
3. Power off your phone. Connect it with USB
4. Reboot with holding Volume Down Button. Now you are in Fastboot & Rescue Mode
5. Start CMD in Folder 1 as Administrator.
6. Type: fastboot oem unlock xxx
xxx is the Bootloadercode
7. Type: fastboot reboot
Now it is important that you choose the right instruction below for your Android Version:
Android 5:
Install TWRP and SuperSU(Root):
1. Enable Developer Mode and USB-Debugging
2. Power off your phone. Connect it with USB
3. Reboot with holding Volume Down Button. Now you are in Fastboot & Rescue Mode
4. Start CMD in Folder 1 as Administrator.
5. Type: fastboot flash recovery recovery.img
6. Type: fastboot reboot
7. After reboot you shut down your phone again and disconnet from USB.
8. Reboot with holding Volume Up Button. Now you should boot into TWRP
9. Install SuperSU with TWRP
10. Reboot your Phone with TWRP
Android 6
Flash Insecure Boot.img
1. Download https://drive.google.com/open?id=0B7q0s3loYhP3Y3lWd1FReExmbVE
2. Enable Developer Mode and USB-Debugging
3. Power off your phone. Connect it with USB
4. Reboot with holding Volume Down Button. Now you are in Fastboot & Rescue Mode
5. Start CMD in Folder 1 as Administrator.
6. Type: fastboot flash boot boot.img
7. Type: fastboot reboot
Install TWRP and SuperSU(Root):
1. Enable Developer Mode and USB-Debugging
2. Power off your phone. Connect it with USB
3. Reboot with holding Volume Down Button. Now you are in Fastboot & Rescue Mode
4. Start CMD in Folder 1 as Administrator.
5. Type: fastboot flash recovery recovery.img
6. Type: fastboot reboot
7. After reboot you shut down your phone again and disconnet from USB.
8. Reboot with holding Volume Up Button. Now you should boot into TWRP
9. Install SuperSU with TWRP
10. Reboot your Phone with TWRP
So what's the trick to registering on the damn Huawei account?
rockky said:
So what's the trick to registering on the damn Huawei account?
Click to expand...
Click to collapse
Were you able to root your phone?
I made a Huawei ID, then i logged in but on the chinese version and it worked.
hi,
I followed step by step the tuto, but I still have the root is not properly installed, which would have a solution? Huawei p8 dav max 701 l ...
keeepc said:
hi,
I followed step by step the tuto, but I still have the root is not properly installed, which would have a solution? Huawei p8 dav max 701 l ...
Click to expand...
Click to collapse
So whats your problem? You rooted and installed SuperSU?
Hirs_E_Fruit said:
So whats your problem? You rooted and installed SuperSU?
Click to expand...
Click to collapse
Yes, I ROOTE, but root checker by Joey Krim indicates I'm not ROOTE, and free android root checker tool and others that's ok .... I think I'm ROOTE. Have got supersu. Thanks you for your help!
,
Hi Please help , i followed steps , it flashes fastboot.img but when i reboot and press volume up , boots to emui and not twrp. what am i doing wrong?
Try : adb reboot recovery
What's the direct linkt to the chinese site for boorloader code? The link ony redirects me to the log-in, you know, email and password.
iantaylor27 said:
Hi Please help , i followed steps , it flashes fastboot.img but when i reboot and press volume up , boots to emui and not twrp. what am i doing wrong?
Click to expand...
Click to collapse
You have to disconnect your phone from the USB cable otherwise it will keep booting you to the EMUI recovery. You then Hold Volume and Power Up once your phone is off, and it will immediately take you to TWRP.
Cheers buddy , your a star
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
I removed phone manager and other bloatwhere , should I switch launcher ? My gear s2 disconnects alot , could it be phone software ? Is there a way to keep Bluetooth active when screen off ?
iantaylor27 said:
Cheers buddy , your a star
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
I removed phone manager and other bloatwhere , should I switch launcher ? My gear s2 disconnects alot , could it be phone software ? Is there a way to keep Bluetooth active when screen off ?
Click to expand...
Click to collapse
I use Nova Launcher, which I've used since my Note 1. It's fantastic and highly customizable.
The Gear S2 disconnects a lot period. I'm not a fan of it. I have a Pebble Original Watch, which stays connected without issues. I bought the Huawei Smartwatch and Gear S2 to compare. The Gear S2 had worse battery life and multiple disconnects (the same issue you are facing) even when right next to the phone. I sent it back. I'm still debating on whether or not to keep the Huawei watch. As sleek as it is, nothing beats the Pebble for practical purposes and battery life. I really look forward to whatever can get close to matching that. My Huawei watch lasts about 2.5 days without any bluetooth issues. I haven't done anything different. I think the Gear S2 just doesn't play well with this phone.
Where am I supposed to enter this info to get the code I need? I registered for the site, but there really isnt some place where I can enter that info.
https://emui.huawei.com/cn/plugin.php?id=unlock&mod=detail
my model is purchased in japan, it is D 702. Works the root as explained here?
The only difference betwen the models is the modem baseband and system.img. Recovery is the same.
I entered in my information for the unlock code over and over again, and nothing ever works, and I dont believe im doing anything wrong. So, can someone tell how they want you to enter the information they want?
PM it to me, I will try it!
iantaylor27 said:
Hi Please help , i followed steps , it flashes fastboot.img but when i reboot and press volume up , boots to emui and not twrp. what am i doing wrong?
Click to expand...
Click to collapse
install apk quickboot,and enter to recovery in emui
hey guys i hv successfully flashed twrp in moto e3 power
follow me to flash in ur moto e3 power
but i hve a problem too! i cant able to root even i have twrp in my smartphone
have any suggestions? please mail me at [email protected]
Process to install twrp in moto e3 power
first you have to install adb drivers in your pc
these are very common you can download form any site
after installation
pick your phone
go into settings
about phone
tap build number 6 or 7 times
there will be a pop up that you are a developer now
hit back button l
hitt click developer options in settings
find oem unlocking
enable it by entering your screen lock
allow usb debugging in developer options
download pad platform tools in your i will give links later
extract them in pc
open extracted folder connect your phone with data cable
hit click shift + right click
open command window
here yu have to execute first command
adb reboot bootloader
then check your phone
and allow this computer alway for usb debugging
your cellphone will reboot into bootloader mode it not that re enter command and hit enter
now you are in fastboot mode
execute second command
fastboot oem unlock
third command is
fastboot format userdata
not plug out your phone and check
press 1 minute both power key and volume up
your mobile will reboot
and there will be a popup on main bootlogo that device is unlocked
than you have to get phone into fastboot mode by first command
and same process
then download twrp for your moto e3 power from official site
rename that file with recovery.img
and copy into extracted folder in your pc
hit click shift +right click in that folder
and execute command
fastboot flash recovery recovery.img
aftr some time yu are ready rock onn.... B|
reboot into recovery first time to check that u hve successfully flashed custom recovery
dont forget to follow me on Google+ if this is valuable for you!
mail me i i will send yu the all original tools
yours_jassi said:
hey guys i hv successfully flashed twrp in moto e3 power
follow me to flash in ur moto e3 power
but i hve a problem too! i cant able to root even i have twrp in my smartphone
have any suggestions? please mail me at [email protected]
Process to install twrp in moto e3 power
first you have to install adb drivers in your pc
these are very common you can download form any site
after installation
pick your phone
go into settings
about phone
tap build number 6 or 7 times
there will be a pop up that you are a developer now
hit back button l
hitt click developer options in settings
find oem unlocking
enable it by entering your screen lock
allow usb debugging in developer options
download pad platform tools in your i will give links later
extract them in pc
open extracted folder connect your phone with data cable
hit click shift + right click
open command window
here yu have to execute first command
adb reboot bootloader
then check your phone
and allow this computer alway for usb debugging
your cellphone will reboot into bootloader mode it not that re enter command and hit enter
now you are in fastboot mode
execute second command
fastboot oem unlock
third command is
fastboot format userdata
not plug out your phone and check
press 1 minute both power key and volume up
your mobile will reboot
and there will be a popup on main bootlogo that device is unlocked
than you have to get phone into fastboot mode by first command
and same process
then download twrp for your moto e3 power from official site
rename that file with recovery.img
and copy into extracted folder in your pc
hit click shift +right click in that folder
and execute command
fastboot flash recovery recovery.img
aftr some time yu are ready rock onn.... B|
reboot into recovery first time to check that u hve successfully flashed custom recovery
dont forget to follow me on Google+ if this is valuable for you!
mail me i i will send yu the all original tools
Click to expand...
Click to collapse
Hello,
XDA Assist is for newbies finding their way around XDA Developers, it isn't a development forum.
Please post the guide and file links here Moto E3 Forum, the users looking for the same might be able to use your help.
Great work mate and congratulations!
Thread closed!
Regards
Vatsal,
Forum Moderator.
This Method Is For Rooting Lyf Water 7 i.e LS-5504 running 6.0 android
Proceed At Your Own Risk I m Not Responsible For Any Damage To your Phone
To Begin Root Process First DOWNLOAD THESE FILES-
1. TWRP(working ported by me) Zippyshare Link
Mirror Mediafire link
2. Minimal ADB & Fasboot Tool for Android https://devsjournal.com/download-minimal-adb-fastboot-tool.html
3. Sp flash tool https://spflashtool.com/
4. Scatter files for our device https://www.mediafire.com/file/qy2be6cxv7e0j9r/MT6753~1.TXT/file Mirror - Zippyshare link
5. supersu zip Click here (this is property of chainfire all credits belong to them)
NOTE - Backup your contacts, messages and data in sd card or pc as it will be gone
Now follow instructions-
1. Install minimal ADB & Fastboot ( i prefer u install it in C:\ drive) Open the file named cmd. This will open a command prompt
2. Power off phone. Once it is off click volume up and power button together ,now screen will show a smalll menu/boot menu. Press volume up to move arrow to fastboot mode and select it by pressing volume down button. You will enter fastboot mode now.
3. Connect phone to pc using data cable. Come back to command prompt. Type this command.
PHP:
fastboot devices
it will show your device like 5DSOYL.. something like that
now type another command
PHP:
fastboot oem unlock
Now check your phone it will ask about unlocking bootloader press volume up key to agree
this will delete all data
after this type
PHP:
fastboot reboot
your bootloader is unlocked now
4. Keep device connected. once phone reboots, open Sp flash tool. select the scatter file (downloaded above) then on recovery tab select the recovery.img (download above). Click the download button and then power off your phone.
Twrp will be flashed, You can access it by Pressing volume up and power button together and selecting recovery in boot mode (where we selected fastboot mode)
5. To gain root just flash su zip through Twrp so simple
In case recovery don't get flashed there may be problem in sp flash tool drivers .. plz google how to install them
Still working in 2019, files updated to latest version and dead links replaced :good:
Any custom ROM available for this model?
I successfully rooted n installed TWRP recovery, now next step is to flash custom ROM so asking
DevanandaDS said:
Any custom ROM available for this model?
I successfully rooted n installed TWRP recovery, now next step is to flash custom ROM so asking
Click to expand...
Click to collapse
i have made one but not tested it yet....
i'll test it by tomorrow... if you want i can provide u the link
Yes Provide Me link i have to test that rom earlier.
ShaikhAaqib said:
i have made one but not tested it yet....
i'll test it by tomorrow... if you want i can provide u the link
Click to expand...
Click to collapse
Yes Provide Me link i have to test that rom earlier.
smit451 said:
Yes Provide Me link i have to test that rom earlier.
Click to expand...
Click to collapse
i will upload it tomorrow and give u the link bro...
Hello folks. Answering the questions above there is no custom rom for lyf water 7s. lyf water 7s don't has any sort of development on xda. I would advice not to mess around more then rooting because if you phone got hard brick (when it's stuck on logo) it won't be possible for you to flash it as sp flash tool will not recognize your device. Just get a new device.
MannyPanwar said:
Hello folks. Answering the questions above there is no custom rom for lyf water 7s. lyf water 7s don't has any sort of development on xda. I would advice not to mess around more then rooting because if you phone got hard brick (when it's stuck on logo) it won't be possible for you to flash it as sp flash tool will not recognize your device. Just get a new device.
Click to expand...
Click to collapse
true, but it is possible to port a rom for it, just that the procedure is difficult, since not many people use this device there is no development on this i guess..
i tried to port a rom... but i failed, i guess i did not unlock the BL... no idea.. it didn't go well..
Hi, I am writing this guide because many people followed other guides in the forum and lost their data. This is the proper way of unlocking the bootloader without losing your data.
0 - Read the whole guide before proceeding and proceed at your own risk!
1 - Make sure you have adb and fastboot installed on your device,
For Windows follow this guide (I suggest installing it system-wide, so that you can execute commands from every directory on your PC): https://forum.xda-developers.com/showthread.php?t=2588979
For MacOS and Linux : https://www.xda-developers.com/install-adb-windows-macos-linux/
2 - After the required tools are installed go to Settings -> About Phone on your phone and keep tapping on build number until a toast notification tells you that the developer settings are enabled.
3 - Go to Settings -> System -> Developer Settings and enable OEM unlocking option.
4 - Turn off the phone and when it's fully off, hold power + vol down button to boot into fastboot mode. When you've done this step successfully, you will see a blue FASTBOOT text on the screen with a bunny scrambling the internals of Android.
5 - Connect your phone to your PC and open a CLI/terminal/PowerShell window and type this but do NOT hit enter :
Code:
fastboot oem unlock
when you are ready to execute the command, start pressing only vol down button and then hit enter, HOLD vol down until the phone boots into fastboot mode again. This basically tricks the phone to boot into Fastboot mode instead of erase mode. To make sure the phone doesn't boot into erase mode on the next boot you need to do the following:
6 - While in fastboot mode type this into the CLI/terminal/PowerShell window but do NOT hit enter :
Code:
fastboot reboot
when you are ready to execute the command, start pressing only vol down button and then hit enter, HOLD vol down until the phone boots into fastboot mode again.
7 - Now you are ready to boot into your system. Either boot by holding power button or typing
Code:
fastboot reboot
into the terminal and hitting enter.
By rebooting twice, you make sure the phone doesn't boot into erase mode. If you flash the stock ROM beforehand and setup your device (login to Play Store), your device will still be Play Store certified by this method. But if you unlock the bootloader and the phone erases its storage, you won't be able to download apps like Netflix, because your device will not be certified by Play Store, this is because the Play Store checks for unlocked bootloaders. But by making it check the certification while it's locked and then unlocking the bootloader, you can make this issue go away. Feel free to ask for more proper guides for dummies, if you need. I have bricked my device many times and learnt by trial and error, so I'd be happy to make you avoid those same mistakes. Cheers.
No need double reboot
Os_Herdz said:
No need double reboot
Click to expand...
Click to collapse
It is not necessary, but a preventative measure. I've had instances where I hadn't rebooted twice and the phone booted into erase mode. This is a guide for people who want to make sure they won't lose data.
Another tip:
If you're with stock everything and don't want to loose data, do not boot into recovery mode (power + vol+) as it sometimes try to wipe data without any confirmation. Did happened here once, back in March 2019, but thankfully my pictures and most data are stored in MicroSD card.
RFD80M-75679 said:
Another tip:
If you're with stock everything and don't want to loose data, do not boot into recovery mode (power + vol+) as it sometimes try to wipe data without any confirmation. Did happened here once, back in March 2019, but thankfully my pictures and most data are stored in MicroSD card.
Click to expand...
Click to collapse
Can confirm, if your bootloader is unlocked and you don't have TWRP installed, booting into recovery mode will wipe the device.
marstonpear said:
Hi, I am writing this guide because many people followed other guides in the forum and lost their data. This is the proper way of unlocking the bootloader without losing your data.
0 - Read the whole guide before proceeding and proceed at your own risk!
1 - Make sure you have adb and fastboot installed on your device,
For Windows follow this guide (I suggest installing it system-wide, so that you can execute commands from every directory on your PC): https://forum.xda-developers.com/showthread.php?t=2588979
For MacOS and Linux : https://www.xda-developers.com/install-adb-windows-macos-linux/
2 - After the required tools are installed go to Settings -> About Phone on your phone and keep tapping on build number until a toast notification tells you that the developer settings are enabled.
3 - Go to Settings -> System -> Developer Settings and enable OEM unlocking option.
4 - Turn off the phone and when it's fully off, hold power + vol down button to boot into fastboot mode. When you've done this step successfully, you will see a blue FASTBOOT text on the screen with a bunny scrambling the internals of Android.
5 - Connect your phone to your PC and open a CLI/terminal/PowerShell window and type this but do NOT hit enter :
Code:
fastboot oem unlock
when you are ready to execute the command, start pressing only vol down button and then hit enter, HOLD vol down until the phone boots into fastboot mode again. This basically tricks the phone to boot into Fastboot mode instead of erase mode. To make sure the phone doesn't boot into erase mode on the next boot you need to do the following:
6 - While in fastboot mode type this into the CLI/terminal/PowerShell window but do NOT hit enter :
Code:
fastboot reboot
when you are ready to execute the command, start pressing only vol down button and then hit enter, HOLD vol down until the phone boots into fastboot mode again.
7 - Now you are ready to boot into your system. Either boot by holding power button or typing
Code:
fastboot reboot
into the terminal and hitting enter.
By rebooting twice, you make sure the phone doesn't boot into erase mode. If you flash the stock ROM beforehand and setup your device (login to Play Store), your device will still be Play Store certified by this method. But if you unlock the bootloader and the phone erases its storage, you won't be able to download apps like Netflix, because your device will not be certified by Play Store, this is because the Play Store checks for unlocked bootloaders. But by making it check the certification while it's locked and then unlocking the bootloader, you can make this issue go away. Feel free to ask for more proper guides for dummies, if you need. I have bricked my device many times and learnt by trial and error, so I'd be happy to make you avoid those same mistakes. Cheers.
Click to expand...
Click to collapse
When I type fastboot oem unlock and press enter, a screen shows on the device to select unlock or do not unlock. Then what?
softgadget said:
When I type fastboot oem unlock and press enter, a screen shows on the device to select unlock or do not unlock. Then what?
Click to expand...
Click to collapse
It shouldn't ask you to unlock phone or not in fastboot mode, as what I did unlocked mine for months ago. It should return you to fastboot mode in a flash (a fraction of seconds) and manually restart your phone by holding up power button until you'll see unlocked warning and AndroidOne logo.
If it is, try to select "unlock", but your data may wipe afterwards.
RFD80M-75679 said:
It shouldn't ask you to unlock phone or not in fastboot mode, as what I did unlocked mine for months ago. It should return you to fastboot mode in a flash (a fraction of seconds) and manually restart your phone by holding up power button until you'll see unlocked warning and AndroidOne logo.
If it is, try to select "unlock", but your data may wipe afterwards.
Click to expand...
Click to collapse
I am running Android 10 latest update on my Mi A2 and my phone shows a screen to select Unlock or Not to Unlock options. It is in fastboot mode. What is the problem?
softgadget said:
I am running Android 10 latest update on my Mi A2 and my phone shows a screen to select Unlock or Not to Unlock options. It is in fastboot mode. What is the problem?
Click to expand...
Click to collapse
You have another device. This is for Mi A2 Lite, not Mi A2. And on top of that, it works for Android Pie. I don't know for stock Android 10 since we (Mi A2 Lite users) don't have it yet (as of my writing).
RFD80M-75679 said:
You have another device. This is for Mi A2 Lite, not Mi A2. And on top of that, it works for Android Pie. I don't know for stock Android 10 since we (Mi A2 Lite users) don't have it yet (as of my writing).
Click to expand...
Click to collapse
Oh. OK then.thank you
I downgrade to oreo and now when power om phone show message that is bootloader unlocked, so can lock again bootloader to remove that message without lost data or must live with that? If can do that, how? I forgot to say after flash oreo bootloader was locked, but i must unlock again to fix sim cards.
popadic022 said:
I downgrade to oreo and now when power om phone show message that is bootloader unlocked, so can lock again bootloader to remove that message without lost data or must live with that? If can do that, how? I forgot to say after flash oreo bootloader was locked, but i must unlock again to fix sim cards.
Click to expand...
Click to collapse
You can unlock with the same method. But I believe you will flash a zip from TWRP to fix SIM cards and that will break your phone if you lock the bootloader. So after fixing the SIM cards, you need to leave the phone unlocked, otherwise phone will be bricked. If you want to get rid of the ugly splash screen, you can flash a custom splash you can find in the forum.
marstonpear said:
Can confirm, if your bootloader is unlocked and you don't have TWRP installed, booting into recovery mode will wipe the device.
Click to expand...
Click to collapse
So after unlocked the devices, it's recommended to install TWRP to avoid this right ?
gusbalaa said:
So after unlocked the devices, it's recommended to install TWRP to avoid this right ?
Click to expand...
Click to collapse
You can leave it as is, but don't ever boot into recovery if you value your data from Internal Storage or if haven't backed up data to MicroSD.
RFD80M-75679 said:
You can leave it as is, but don't ever boot into recovery if you value your data from Internal Storage or if haven't backed up data to MicroSD.
Click to expand...
Click to collapse
I think I'm gonna install TWRP for safety, my data is already on MicroSD.
EDIT : Is possible to install TWRP & Root without losing data / need to flash Decrypt ?
gusbalaa said:
I think I'm gonna install TWRP for safety, my data is already on MicroSD.
EDIT : Is possible to install TWRP & Root without losing data / need to flash Decrypt ?
Click to expand...
Click to collapse
You don't need to decrypt. You can install TWRP and flash Magisk through TWRP.
marstonpear said:
You don't need to decrypt. You can install TWRP and flash Magisk through TWRP.
Click to expand...
Click to collapse
Thanks, already done it.
Flashed TWRP & Magisk without losing any data.
marstonpear said:
Hi,
Click to expand...
Click to collapse
will this metode also work on mi10
-fluffy- said:
will this metode also work on mi10
Click to expand...
Click to collapse
I'm not sure but probably not. Because Mi 10 is a MIUI device and this is an Android One. Still you gotta try to make sure, but the risk is all yours. Cheers.
marstonpear said:
Hi, I am writing this guide because many people followed other guides in the forum and lost their data. This is the proper way of unlocking the bootloader without losing your data.
0 - Read the whole guide before proceeding and proceed at your own risk!
1 - Make sure you have adb and fastboot installed on your device,
For Windows follow this guide (I suggest installing it system-wide, so that you can execute commands from every directory on your PC): https://forum.xda-developers.com/showthread.php?t=2588979
For MacOS and Linux : https://www.xda-developers.com/install-adb-windows-macos-linux/
2 - After the required tools are installed go to Settings -> About Phone on your phone and keep tapping on build number until a toast notification tells you that the developer settings are enabled.
3 - Go to Settings -> System -> Developer Settings and enable OEM unlocking option.
4 - Turn off the phone and when it's fully off, hold power + vol down button to boot into fastboot mode. When you've done this step successfully, you will see a blue FASTBOOT text on the screen with a bunny scrambling the internals of Android.
5 - Connect your phone to your PC and open a CLI/terminal/PowerShell window and type this but do NOT hit enter :
Code:
fastboot oem unlock
when you are ready to execute the command, start pressing only vol down button and then hit enter, HOLD vol down until the phone boots into fastboot mode again. This basically tricks the phone to boot into Fastboot mode instead of erase mode. To make sure the phone doesn't boot into erase mode on the next boot you need to do the following:
6 - While in fastboot mode type this into the CLI/terminal/PowerShell window but do NOT hit enter :
Code:
fastboot reboot
when you are ready to execute the command, start pressing only vol down button and then hit enter, HOLD vol down until the phone boots into fastboot mode again.
7 - Now you are ready to boot into your system. Either boot by holding power button or typing
Code:
fastboot reboot
into the terminal and hitting enter.
By rebooting twice, you make sure the phone doesn't boot into erase mode. If you flash the stock ROM beforehand and setup your device (login to Play Store), your device will still be Play Store certified by this method. But if you unlock the bootloader and the phone erases its storage, you won't be able to download apps like Netflix, because your device will not be certified by Play Store, this is because the Play Store checks for unlocked bootloaders. But by making it check the certification while it's locked and then unlocking the bootloader, you can make this issue go away. Feel free to ask for more proper guides for dummies, if you need. I have bricked my device many times and learnt by trial and error, so I'd be happy to make you avoid those same mistakes. Cheers.
Click to expand...
Click to collapse
Wowwww! Thank you very much, time ago I've unlocked the bootloader without losing any data
That's a very good solution