Related
I am Having Samsng Google Nexus S i9020T..... After I updated it to ICS via OTA phone is not rebooting... It has stucked at Google Logo.. I have tried taking the battery out and reinserting it still Phone does not turn on... Plz Plz help me with this its very very urgent... PLz Help me asap possible.. I have also tried getting into fastboot mode and also have tried to wipe cache/factory reset...still Phone Does not turn on.., Help me asap and give me full procedure in detail or give me the link...
this might help u
http://forum.xda-developers.com/showthread.php?t=1397393
nicks2587 said:
I am Having Samsng Google Nexus S i9020T..... After I updated it to ICS via OTA phone is not rebooting... It has stucked at Google Logo.. I have tried taking the battery out and reinserting it still Phone does not turn on... Plz Plz help me with this its very very urgent... PLz Help me asap possible.. I have also tried getting into fastboot mode and also have tried to wipe cache/factory reset...still Phone Does not turn on.., Help me asap and give me full procedure in detail or give me the link...
Click to expand...
Click to collapse
How long did you wait for it to boot up? Sometimes after it update, it takes quite a while. I've waited as long as 6 minutes before for the first boot but then afterwards it is much, much faster.
Still No Progres
greg2826 said:
this might help u
http://forum.xda-developers.com/showthread.php?t=1397393
Click to expand...
Click to collapse
I waited for almost 15 mins.. also tried to boot it again and again for 15-20 Times by taking out battery.. still no progress.. While I get into Fastboot Mode it shows "Lock Status: LOCKED" Which might mean my boot loader has locked.. I ve tried to unlock bootloader via cmd and following all procedures still at Fastboot Mode Lock Status shows Locked.... I urgently need your help... help me asap.... What to do?? Any Expert from Gujarat or Near By Vadodara(Gujarat) Please Contact me at my mail id [email protected]... Thanx in Advance...
This is the same issue, try the suggested solutions:
http://forum.xda-developers.com/showthread.php?t=1787169
SamuelDebruyn said:
Ok, you'll need a Windows computer to fix this. Linux should work too but if you're using Linux I guess you could figure out what would be the instructions for Linux yourself. Mac would work too but I don't know how.
Download and install the Android SDK on your computer from http://developer.android.com/sdk/index.html
Open the SDK Manager (there should be a shortcut in your start menu) and install "Android SDK Tools" and "Android SDK Platform-tools" and "Google USB Driver" (it's in Extra).
Turn your phone off, take the battery out, look at the bottom of the phone and write down the model number.
Now go to https://developers.google.com/android/nexus/images and download the factory image for your model for version 4.0.4.
You'll need something like 7-Zip (http://www.7-zip.org/) to open it.
Copy image-so....zip, radio-crespo...img and bootloader-crespo...img from the factory image to the platform-tools directory (on most computers it will be C:\Program Files (x86)\Android\android-sdk\platform-tools and you'll need Administrator rights).
Now open the platform-tools directory from the Android SDK and right click on an empty space while holding the SHIFT button and select "Open command prompt here".
Put the battery back in your phone and press Power while holding the Volume-Up button so it will boot into fastboot mode. Then connect it to your pc.
If Windows starts complaining about drivers then point it your SDK installation directory (include subfolders) or use 7-Zip to unpack http://www.mediafire.com/?5a7gou9droidi53 and point Windows to the directory where you unpacked it. More info on http://www.sevenforums.com/tutorials/97061-driver-install-device-manager.html
When you type "fastboot devices" and press Enter in the command prompt you opened before it should list one device (being your phone).
If you haven't unlocked your phone before type "fastboot oem unlock" and press Enter. Follow the instructions on the screen on your phone to complete the unlock.
Next type "fastboot flash bootloader bootloader-crespo...img" (you can press TAB to auto-complete) and press Enter. (THIS IS THE MOST IMPORTANT STEP, IF THIS GOES WRONG YOUR PHONE IS SCREWED. Don't continue if another step didn't succeed. If this works, then you can do anything with it.)
Now type "fastboot reboot-bootloader" and press Enter and wait for your phone to reboot into fastboot mode.
Next type "fastboot flash radio radio-crespo...img" (you can press TAB to auto-complete) and press Enter.
Now type "fastboot reboot-bootloader" and press Enter and wait for your phone to reboot into fastboot mode.
Next type "fastboot -w update image-....zip" and press Enter.
Now type "fastboot reboot-bootloader" and press Enter and wait for your phone to reboot into fastboot mode.
Next download http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.0.7-crespo.img and also put it in the platform-tools directory.
Then type "fastboot flash recovery recovery-clockwork-6.0.0.7-crespo.img" and press Enter.
Now type "fastboot reboot-bootloader" and press Enter and wait for your phone to reboot into fastboot mode.
Now use the volume keys on your phone to navigate to the word Recovery and press the Power button to boot into recovery.
You're now in CWM Recovery, use the volume keys and the power button to go to Mounts & Storage > Mount USB Storage (you might have to scroll down). Now it will come up on your pc and you can transfer the update file for Jelly Bean to your phone. You can find it here: http://forum.xda-developers.com/showpost.php?p=27965168&postcount=1 (use the one for your model for IMM76D).
Unmount the usb storage, go back to the main menu and go to Install Zip from sdcard > Choose zip from sdcard and open the update file you just transferred to your phone.
You can now go back to the main menu and choose "reboot system now". It will ask you if you want to remove the auto recovery installation, do that.
That's all, you now have a clean and working Jelly Bean installation.
Someone else wrote down the same instructions if mine are not clear enough: http://forum.xda-developers.com/showthread.php?t=1785672
Click to expand...
Click to collapse
Found this in the thread provided. Just in case you don't want to click the thread.
i have a problem installing sdk manager , i install Android SDK Tools" and "Android SDK Platform-tools" and "Google USB Drive
But can not show sdk shortcut exe ant not show C:\Program Files\(x86) Android\android-sdk\platform-tools folder in c program file, i put manualy all unzip files, making manualy C:\Program Files\(x86) Android\android-sdk\platform-tools folder
Now i open in comand fastboot mode ok device is show nomber 34340561E27600EC
then i type ''fastboot flash bootloader bootloader-crespo...image'' press inter
it show '' error can not load bootloader-crespo...image where is problem where i doing wrong step
Help.
nicks2587 said:
I am Having Samsng Google Nexus S i9020T..... After I updated it to ICS via OTA phone is not rebooting... It has stucked at Google Logo.. I have tried taking the battery out and reinserting it still Phone does not turn on... Plz Plz help me with this its very very urgent... PLz Help me asap possible.. I have also tried getting into fastboot mode and also have tried to wipe cache/factory reset...still Phone Does not turn on.., Help me asap and give me full procedure in detail or give me the link...
Click to expand...
Click to collapse
Try flashing a custom recover like CWM and then mount USB Storage in CWM recovery and connect our device to your PC and copy a Rom to your nexus S you can copy the stock rom GB 2.3.x and then Unmount USB Storage and unplug your device from your PC and Have a Wipe Data Factory Reset and then Flash theRom that we just copied ti the SD Card....if u need help in flashing cstom Recovery You Can check my post in Nexus S Development How to Root Nexus S. See that and just skip down to Flash a custom recovery . Leav the Content showing How To Root Nexus S....if you need the link for Stock Rom GB please let me know.
Dont worry we together will Fix Your Device ...
Good Luck..
I update the phone SKU = TW to WW, in the process of updating the device stands at around 30%, which does not run on the next stop. I waited over 30 minutes still the same and I reset the phone and the result is brick, just boot up black screen and USB symbol, on the discovery fastboot recovery lost.
sorry, my english bad
my zf4 stuck on usb mode too. do you solve it?
please help!!! zenfone 5 hard bootlop/bricked
please help!!! zenfone 5 hard botlop/bricked, just booting and first screen initial logo. and i dont know serial frmware use first, please guide me to fix it, thanks
jarotsakir said:
please help!!! zenfone 5 hard botlop/bricked, just booting and first screen initial logo. and i dont know serial frmware use first, please guide me to fix it, thanks
Click to expand...
Click to collapse
can you go to fastboot ? hold vol up and turn on your phone if can
download ADB Fastboot n install (google it)
download the windows zenfone 5 driver
download firmware from asus site i use V1.14.40.50 for WW
extract and you get UL-ASUS_T00F-WW-1.14.40.50-user.zip
get fastboot.img, boot.img from the zip and copy to adb folder
rename UL-ASUS_T00F-WW-1.14.40.50-user.zip and move it to adb folder
hold vol up and turn on your phone - should went to fastboot
open cmd and go to adb folder
type the following 2 lines: "fastboot flash fastboot fastboot.img" and "fastboot flash boot boot.img" (look phone screen, should say successfully for both)
go to recovery - wipe data (google zenfone recovery mode - follow the blog guide)
choose apply update from adb
from cmd above type "adb sideload <filename>.zip"
reboot n done
decatz said:
can you go to fastboot ? hold vol up and turn on your phone if can
download ADB Fastboot n install (google it)
download the windows zenfone 5 driver
download firmware from asus site i use V1.14.40.50 for WW
extract and you get UL-ASUS_T00F-WW-1.14.40.50-user.zip
get fastboot.img, boot.img from the zip and copy to adb folder
rename UL-ASUS_T00F-WW-1.14.40.50-user.zip and move it to adb folder
hold vol up and turn on your phone - should went to fastboot
open cmd and go to adb folder
type the following 2 lines: "fastboot flash fastboot fastboot.img" and "fastboot flash boot boot.img" (look phone screen, should say successfully for both)
go to recovery - wipe data (google zenfone recovery mode - follow the blog guide)
choose apply update from adb
from cmd above type "adb sideload <filename>.zip"
reboot n done
Click to expand...
Click to collapse
I can't enter fastboot mode, after I pressed power +volup, just usb logo appear on the screen
harrysuccess said:
I can't enter fastboot mode, after I pressed power +volup, just usb logo appear on the screen
Click to expand...
Click to collapse
I am a Xperia developer but I can guide you through the process.
Download the data and stuff as you have been told.
Make sure your phone is switched off
Press and hold voulme up button and connect your phone to pc
you are in fastboot mode.
decatz said:
can you go to fastboot ? hold vol up and turn on your phone if can
download ADB Fastboot n install (google it)
download the windows zenfone 5 driver
download firmware from asus site i use V1.14.40.50 for WW
extract and you get UL-ASUS_T00F-WW-1.14.40.50-user.zip
get fastboot.img, boot.img from the zip and copy to adb folder
rename UL-ASUS_T00F-WW-1.14.40.50-user.zip and move it to adb folder
hold vol up and turn on your phone - should went to fastboot
open cmd and go to adb folder
type the following 2 lines: "fastboot flash fastboot fastboot.img" and "fastboot flash boot boot.img" (look phone screen, should say successfully for both)
go to recovery - wipe data (google zenfone recovery mode - follow the blog guide)
choose apply update from adb
from cmd above type "adb sideload <filename>.zip"
reboot n done
Click to expand...
Click to collapse
done all but my error is in tmp/update.zip pls help me
help
my asus zenfone 5 WW T00F can't enter droidboot. and stuck on asus logo. how i can flash rom without droidboot?
zenfon 5 stuck on boot screen
decatz said:
can you go to fastboot ? hold vol up and turn on your phone if can
download ADB Fastboot n install (google it)
download the windows zenfone 5 driver
download firmware from asus site i use V1.14.40.50 for WW
extract and you get UL-ASUS_T00F-WW-1.14.40.50-user.zip
get fastboot.img, boot.img from the zip and copy to adb folder
rename UL-ASUS_T00F-WW-1.14.40.50-user.zip and move it to adb folder
hold vol up and turn on your phone - should went to fastboot
open cmd and go to adb folder
type the following 2 lines: "fastboot flash fastboot fastboot.img" and "fastboot flash boot boot.img" (look phone screen, should say successfully for both)
go to recovery - wipe data (google zenfone recovery mode - follow the blog guide)
choose apply update from adb
from cmd above type "adb sideload <filename>.zip"
reboot n done
Click to expand...
Click to collapse
it doesnt work . it still stuck on boot screen .. help me please
My asuszenfone5 had usb logo lots of time, when i tried to update to kitkat. You need to try several times power+ vol up (1sec after) since the device has a power button unresponsive. Then just follow the tutorial people told you. Get usb drivers from microsoft(on win8 must give program installer compatibility mode on XPSP3 and administrator previleges to install it properly)In my case i would have batery logo/usb logo several times before getting access to boot mode (10 min attempts So keep trying dont give up. Its an excelent phone but with power button unresponsive/. The same thing happens while you try to wake up phone after deepsleep mode.
Pedromja said:
My asuszenfone5 had usb logo lots of time, when i tried to update to kitkat. You need to try several times power+ vol up (1sec after) since the device has a power button unresponsive. Then just follow the tutorial people told you. Get usb drivers from microsoft(on win8 must give program installer compatibility mode on XPSP3 and administrator previleges to install it properly)In my case i would have batery logo/usb logo several times before getting access to boot mode (10 min attempts So keep trying dont give up. Its an excelent phone but with power button unresponsive/. The same thing happens while you try to wake up phone after deepsleep mode.
Click to expand...
Click to collapse
is there any other way to get into the bootloader? i'm stucked in the white asus logo.. :crying::crying::crying:
same problem here... android start, then after a sec and a UI error restart continuosly... mine is a CUCC version... i can start in droidboot mode but when i try to use fastboot, (phone is in fastboot cmd waiting) then CMD(download:00cf6400).. and freeze, on windows cmd i get sending fastboot FAILED invalid argument..
some ideas?
decatz said:
can you go to fastboot ? hold vol up and turn on your phone if can
download ADB Fastboot n install (google it)
download the windows zenfone 5 driver
download firmware from asus site i use V1.14.40.50 for WW
extract and you get UL-ASUS_T00F-WW-1.14.40.50-user.zip
get fastboot.img, boot.img from the zip and copy to adb folder
rename UL-ASUS_T00F-WW-1.14.40.50-user.zip and move it to adb folder
hold vol up and turn on your phone - should went to fastboot
open cmd and go to adb folder
type the following 2 lines: "fastboot flash fastboot fastboot.img" and "fastboot flash boot boot.img" (look phone screen, should say successfully for both)
go to recovery - wipe data (google zenfone recovery mode - follow the blog guide)
choose apply update from adb
from cmd above type "adb sideload <filename>.zip"
reboot n done
Click to expand...
Click to collapse
I tried to follow this, but every time the it finished the sideload, I still get an error which says "assert failed : greater_than_int (getprop("ro.build.date.utc").1392739......, and then the installation got aborted. I can't access the internal memory cuz I believed my phone was bricked and when opening the phone, I was just stuck with the loading screen and not getting through.
Got this problem when I tried to update my phone to kitkat. The installation got stuck at about 30% and tried to reset it and now I have this problem.
I appreciate it if someone will see this and reply to me. Thanks
help
Hey everyone i have problem same like before i cant enter droidboot whenever i try to hold power and volume up i just get usb logo hope anyone can help this problem
decatz said:
can you go to fastboot ? hold vol up and turn on your phone if can
download ADB Fastboot n install (google it)
download the windows zenfone 5 driver
download firmware from asus site i use V1.14.40.50 for WW
extract and you get UL-ASUS_T00F-WW-1.14.40.50-user.zip
get fastboot.img, boot.img from the zip and copy to adb folder
rename UL-ASUS_T00F-WW-1.14.40.50-user.zip and move it to adb folder
hold vol up and turn on your phone - should went to fastboot
open cmd and go to adb folder
type the following 2 lines: "fastboot flash fastboot fastboot.img" and "fastboot flash boot boot.img" (look phone screen, should say successfully for both)
go to recovery - wipe data (google zenfone recovery mode - follow the blog guide)
choose apply update from adb
from cmd above type "adb sideload <filename>.zip"
reboot n done
Click to expand...
Click to collapse
please help,,,
my zenfone 5 can't enter to fastboot mode ,,, (i've try to hit power and volume up but still can't enter to fashboot mode) and my phone stuck at boot loop...
bondgibtune said:
please help,,,
my zenfone 5 can't enter to fastboot mode ,,, (i've try to hit power and volume up but still can't enter to fashboot mode) and my phone stuck at boot loop...
Click to expand...
Click to collapse
i get same problem
help me..........
Zenforce 4 same problem?
Similar problem with Asus Zenforce/Zenfone 4, any help?
solution for stuk to usb logo
W4sh said:
Similar problem with Asus Zenforce/Zenfone 4, any help?
Click to expand...
Click to collapse
go to my new blog i solve this problem
engashrafn.blogspot.comwatch the video and it will help you to access to droidboot :good:
eng.naim said:
go to my new blog i solve this problem
engashrafn.blogspot.comwatch the video and it will help you to access to droidboot :good:
Click to expand...
Click to collapse
@eng.naim
Nice try budd, I did the trick with my Zenforce 4_T00i_TW but it does'nt respond after usb plugin'... In fact windows does'nt recognize it since his bricking (no driver match). I've seen something similar as yours on this page http://androidxda.com/flash-stock-rom-using-intel-phone-flash-tool
I've received a message log fom MFT, it says that the xml might be not totally correct or well parsed..
W4sh said:
@eng.naim
Nice try budd, I did the trick with my Zenforce 4_T00i_TW but it does'nt respond after usb plugin'... In fact windows does'nt recognize it since his bricking (no driver match). I've seen something similar as yours on this page
I've received a message log fom MFT, it says that the xml might be not totally correct or well parsed..
Click to expand...
Click to collapse
Im not understand you. your problem is the cloverview driver or the flash.xml not parsed to MFT
if your comp. not recognize Cloverview plus driver try to uninstall any past drivers and reinstall isoc driver from my blog and if any error copy it here and i will try to help you thanks
Guys im opening this thread on how to unlock Boot loader and flashing twrp in steps clearly...as there are no clear guide to do this in main threads and people can also share things here...Thanks for the devs who are working for us[emoji3]
Thanks and all credit goes to Dev (Uberlaggydarwin) for developing the magic tool (Magictricks.zip) for unlock and initiating development of this device and all I need from you is just clicking thanks button below that's all [emoji12] [emoji12] [emoji12]
Sent from my F1f using XDA-Developers mobile app
Steps: Making bootloader unlockable
Download Magictricks.zip by (uberlaggydarwin) - go to stock recovery- select install from storage- select the downloaded zip- flash or update it.
This will make the boot loader unlockable and brings fastboot to our device...see below how to unlock bootloader through fastboot completely.
Sent from my F1f using XDA-Developers mobile app
Adb commands for fastboot and flash twrp.
First set up adb shell on your Windows..Download link available below...
Steps to command in adb shell properly to fastboot and to flash custom recovery...let's begin
1-Download adb and install adb drivers for oppo f1.
2-extract the files from adb.rar to your c directory in a folder named adb(creat one) or just extract the folder in c directory.
3-once the files are located in c:\adb go to start menu then search for cmd
4-Type in cd c:\adb then click enter
5-Type in "adb devices" it will show the connected devices it should be bunch of numbers
6-If you can't see them it means adb drivers for your device are not installed then install with adb installer
7- Disconnect your oppo f1 and put your phone in fastboot mode(press and hold vol+ and power button} u will see fastboot screen on phone then connect via usb then let the system install bootloader driver....proceed below
7-Then finally Command in fastboot for our device.
Put twrp recovery image(rename as twrp) in the same folder where adb is present then tick 'oem unlock' on developer option settings in the device before you continue.
Don't proceed here unless you flash "magictricks.zip" through stock recovery.
Starting Boot loader unlock and custom recovery steps:
Connect your device via usb in fastboot mode and command as below..
Type this "fastboot oem unlock" then press enter.(Will wipe your data so backup before you do and wait for reboot) command will show 'ok finished' with some like 0.07secs
Type this "fastboot flash recovery twrp.img" then press enter. wait it will flash then command will show 'ok finished' then disconnect and boot in to new recovery.....enjoy
Note - once u flash the recovery disconnect the phone and switch off from the fastboot then u should boot the twrp recovery first otherwise system will reflash the stock recovery...To boot in to twrp recovery command as "fastboot boot twrp.img" press enter
That's it you have unlocked your boot loader and installed twrp recovery successfully[emoji3] [emoji12] [emoji3] [emoji12]
Credits
Thanks to @uberlaggydarwin for developing magictricks to unlock
Download links:
Magictricks by uberlaggydarwin - https://strangebinaries.re/f1f/magictricks.zip
ADB driver installer(optional) - www14.zippyshare.com/v/ufYG71o0/file.html
ADB Folder files-https://drive.google.com/file/d/0B9SasC5iWK5kT1liMlpKRGY3LVU/view?usp=sharing
Twrp recovery for f1f - http://build.twrp.me/twrp/twrp-3.0.2-0-f1f.img
Rooting guide:
After installing TWRP recovery flash this Super Su Stable version and reboot then install super su from playstore if you dont see any icon
Flashable Su Binaries - http://forum.xda-developers.com/showthread.php?p=23427715
Sent from my F1f using XDA-Developers mobile app
reserve
Thankss a lot
drganbds said:
Adb commands for fastboot and flash twrp.
First set up adb shell on your Windows..Download link available below...
Steps to command adb properly please share it somebody[emoji12] ill share once I know and master it
1-Download adb and install adb drivers for oppo f1.
2-extract the files from adb.rar to your c directory in a folder named adb(creat one) or just extract the folder in c directory.
3-once the files are located in c:\adb go to start menu then search for cmd
4-Type in cd c:\adb then click enter
5-Type in "adb devices" it will show the connected devices it should be bunch of numbers
6-If you can't see them it means adb drivers for your device are not installed then install with adb installer
7-THEN FINALY COMMAND some for our device.
Put twrp recovery image(rename as twrp.img) in the same folder where adb is present then tick 'oem unlock' on developer option settings in the device before you continue.
Don't proceed here unless you flash "magictricks.zip" through stock recovery.
Starting Boot loader unlock and custom recovery steps:
Connect your device via usb and command as below..
Type this "fastboot oem unlock" then press enter.(Will wipe your data so backup before you do and wait for reboot)
stucked at waiting for device ( then i press vol + plus power button) command shows Ok finished but nothing happened to device no changes nothing...help please
Click to expand...
Click to collapse
I think you have not installed your adb drivers properly...use pdanet pc version to install otherwise use adb installer which is available in dl.
Sent from my F1f using XDA-Developers mobile app
Guys if u stuck at "waiting for device"
solution - disconnect the device, put it in fastboot mode (press and hold vol+ and power you will see fastboot screen)and connect it again then it will install bootloader drivers and continue. It will show 'ok finished' then u can continue to flash recovery and other stuffs...enjoy[emoji3] [emoji12] [emoji3] [emoji12]
Sent from my F1f using XDA-Developers mobile app
@ teteakholhring. you have done it right go head flashing recovery step.....now u unlocked the bootloader then flash the recovery
Thread re edited please check if u have doubts.
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
^^ I've read from other thread that right after you flashed the TWRP recovery image, you must start-up the phone in TWRP recovery first before eventually booting to Android.
I haven't unlock my phone yet though but I will once I see some custom ROMs available.
Sent from my F1f using Tapatalk
x36023x36023 said:
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
Click to expand...
Click to collapse
All your steps are perfectly right but once u flash the recovery disconnect the phone and switch off from the fastboot then u should boot the twrp recovery first otherwise system will reflash the stock recovery...
Do the recovery flash again and boot to twrp first...
It is not necessary that oem unlock will wipe your data so no worry.
Me too I'm waiting for available alternative roms to install twrp recovery ....I just flashed magictrick and it said that I have update the build.... Thanks sure it will be functional....
x36023x36023 said:
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
Click to expand...
Click to collapse
Ok you did everything right.. I've attached the picture how i did it.. I was busy solving the same problem.. Remove the usb when it says booting then it will boot into twrp recovery.. Then flash latest supersu..that's it download super user from playstore.. Thre you go.. You got what you wanted..
teteakholhring said:
Ok you did everything right.. I've attached the picture how i did it.. I was busy solving the same problem.. Remove the usb when it says booting then it will boot into twrp recovery.. Then flash latest supersu..that's it download super user from playstore.. Thre you go.. You got what you wanted..
Click to expand...
Click to collapse
Ya right guys...Please check this thread's main page everything was written clearly for how to do it correctly...enjoy
Sent from my F1f using XDA-Developers mobile app
hoping someone will upload a video on how to properly root our device.
wakaranay said:
hoping someone will upload a video on how to properly root our device.
Click to expand...
Click to collapse
What doubt you have? I'm here to clear it all and every steps are clearly explained in the main page...
Sent from my F1f using XDA-Developers mobile app
thank you for all your help
I made my phone rooted
but when I forced to delete original apps like original browser
and reboot
all the things on home page will disappear
when I delete original browser only
it still happened
this never happened on my other Sony device
can anyone tell me why
x36023x36023 said:
thank you for all your help
I made my phone rooted
but when I forced to delete original apps like original browser
and reboot
all the things on home page will disappear
when I delete original browser only
it still happened
this never happened on my other Sony device
can anyone tell me why
Click to expand...
Click to collapse
Use root app delete from playstore or manually remove .apk file along with .odex file...
Sent from my F1f using XDA-Developers mobile app
Hi FriendsIn this post i will tell how you can open recovery mode in all 10.or Devices. I have 2 methods to do this.
So Let's get start
Method 1 - Using Pc
Requirements - 1 Usb Cable and PC
First You Need To Install Adb Drivers On your PC and Download Platform Tools zip file for Windows PC by Clicking This Linkhttps://developer.android.com/studio/releases/platform-tools.html. Now Extract File and Open platform tools Folder and Press Shift Key then Right Click. Now You Will See Open PowerShell window here, Click It.
Open Your Phones settings and go to about Phone. Click Build Number 7 and more Times it will Open Developer Option. Now open Developer Option And turn On Usb Debugging.
After Opening enabling Debugging Connect your Phone Using Usb Cable.
Now Run Commands
"Adb Devices"
Your Device Prompt For Debugging. Grant It.
If Your Device Appear In PC Run Next Command
"Adb reboot recovery"
Now your phone automatically boot into recovery mode.
Method 2 - Without PC
Requirements - Only Your Device
Simply Turn Off Your Device. After Turn Off your device Press Volume Up key Then Power On Key. After Vibration release all keys.
It will boot Recovery Mode
Now You Can Wipe, Install Update, and Unlock Bootloader of your 10.or Devices.
This Is A Hint To Increase Development Support For This Devices. So Developers Try To Unlock Bootloader And Start Making Roms and recovery etc. After Any Rom or recovery Roll Out for this device I will Root My Device and Just Install It on my device.
Thanks
i stuck at boot in 10.or g phone
booting running till battery drain
please show method without data lose
dev26dmp said:
i stuck at boot in 10.or g phone
booting running till battery drain
please show method without data lose
Click to expand...
Click to collapse
try clearing cache files from recovery...
also what were you trying to do when u messed up your phone?
if clearing cache doesn't work i think that u will have to flash stock rom.
Tenor e no command error
Hello everyone, myself ramchandra, I have tenor e phone and when I m trying to open its recovery mode then it is showing me no command screen.
Will some pls help me for this.
Thanks
Ramchandra.
Press power key for 2 to 3 seconds then press volume up key along with it this will let you in recovery mode.
Hello! Hope You're All Doing good!
Topic: LYF Earth 2 Stock Firmware (Flashable) Why This Thread? --> Many People Make Mistakes While Rooting their Devices and Flashing Roms and Bricks their Phones or Gets stuck in Bootloop, Here is a Thread To Make Sure You Don't Lose Your Phone forever! Let's Get Started WIth Steps!
Pre Req:1. Phone Must be At least 30%- 50% Charged
2. Must Be Rooted for Non-PC Installlation
3. Bootloader Shall be Unlocked (If Not, Follow the Steps to Unlock it)
Steps To Follow Flash It (PC Required):1. Download And Extract the LYF Earth 2 Stock Firmware
2. Go to About Phone > Build Number and Tap on it 7 Times > Enable USB Debugging
3. Now Connect the Phone to the PC
4. Download The ADB Tool From Here!
5. Now Extract It To a Safe Folder And Run it with CMD (Click on the Place where the File Directory Is Written and Erase all and type 'cmd' and hit Enter)
6. Now Type
adb devices
Click to expand...
Click to collapse
It'll Ask to Confirm the Debugging With your Computer's Key Fingerprint, Click Always Allow from this Computer and Click Allow.
7. Now Power Off Your Phone, And Press Power + Home + Volume Up Button (Keep Holding It Until You See The White Powered By Android Screen) Now Release Both the Buttons (Home and Volume Up But Keep Holding the Power Button Until You are In the Stock Recovery)
8. Once You're in The Stock Recovery Mode, Use the Volume Keys to Navigate and Power key to Confirm, Go to Apply Update From ADB and Confirm
7. Now you Plug in Your Device to The Computer and Type
adb sideload firmware_file_name
Click to expand...
Click to collapse
In CMD, Now The Flashing Will Begin And You're Done! Now Reboot Your Device And All the Problems In your Phone are Fixed!
Note: I Missed The Step to Unlock the Bootloader hehe, And I'm way too lazy to edit it Above, So here are the Steps, Boot Your phone into Fastboot mode as Shown Above, And Type fastboot oem unlock or fastboot oem unlock-go or fastboot flashing unlock in CMD!
I Hope I Saved Your Precious Device! Please Give It a Like If I Did! Thank You! Happy Hacking!
CREDITS
Special Thanks to @Gautam Maini for Providing The Link of LYF Earth 2!! If He Wasn't There, Maybe I Couldn't Save Someone's Device, Do Follow Him!!
Download Links:
(LYF Earth 2 Stock Firmware)
I Hope This Helped, Ask Any Quetions In here!