Related
Since TWRP is unbootable under this build, you have to use patched boot trick to root this phone.
However, only Magisk 17.1 is usable on this build, Magisk 17.2 - 18.0 can't be installed properly.
So I made a custom update channel that fixed to Magisk 17.1 to assist me.
This guide requires unlocked bootloader - still, I won't introduce how to unlock it here, please Google for it.
Click to expand...
Click to collapse
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
OK, thanks for the info.
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
I hope you can build TWRP for Android P variant of Chinese and it works on non-unlockbootloader. Like you used to do with Oreo? .Thanks
This did not work with TA-1021 while i have pi installed with twrp and patched boot with magisk 16.1 but it do not work not even root access just keep recovery unchanged(twrp).
It says deviceid locked ple if i patch boot with 17.1 what to do! google pay and banking apps dont work.
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
Can we use official TWRP recovery (3.2.3 made for PLE)
On pie 612H CN - OF YOUR HOMEBREW
and also on 612H ww ??
Please tell
---------- Post added at 06:12 AM ---------- Previous post was at 06:05 AM ----------
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
Can we install this TWRP recovery on Chinese firmware (or ww firmware of ta-1003)or it can be flashed only on PLE versions
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
Can I install D1C-612H-WW over 612H-CN using OST ??
OST show that the image is broken
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
On rebooting Android root gone????
dont work for me
edit: worsk now over ND1-612C-0-00WW , but for firm official for n5 (612h-0-00WW ) not works, ist patched the xploit for magisk 17 and up
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
Please help I have working 1003 ww pi installed on Ta-1021 and initially rooted using Chinese twrp with magisk later I tried to install update of twrp recovery got crashed and could not enter recovery tried to flash with Qualcomm tools can enter into Edl phone detected but frimware files doesn't flash some errors. Now result is I can operate my phone magisk 16.1 installed but useless. Banking apps don't work. Factory reset don't work. *#*#874#*#* says file not found (may be because I don't have recovery). Ost la as usual don't work. Please help!
Please help me i am on oreo version .. and i have flashed twrp recovery on my nokia 6 (TA - 1021) ..
THE Problem is when i reboot to recovery it's not booting in twrp but it's booting on custome recovery ..
I need pc everytime , if i want to boot it on twrp .
I have to run command every time to boot in on twrp recovery ..
Is there any way to directly boot it on twrp recovery not in custom recovery ? Please help me
@hikari_calyx Does fastboot boot work for you on pie? For me, it does not. Almost shat my pants thinking my TWRP doesn't work but it does in fact work, just fastboot booting it does not work.
Finally got the official pie update on my TA-1033. (unlocked bootloader)
The standard versions of TWRP 3.2.3.0 / Magisk 17.3 / Magisk Manager 6.0.1 worked perfectly.
As above, "fastboot boot" doesn't work, but "fastboot flash" etc. does.
Happy days.
Not working for me please can you tell the procedure step by step as i tried your steps but didn't happen anything please
---------- Post added at 06:29 PM ---------- Previous post was at 06:26 PM ----------
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
Not working i have unlocked bootloader but i tried to flash twrp and it's not booting on it any other solution please let me know .
Can you help me please my device is showing me this on my recovery , what's an issue please reply as soon as possible i can't even apply update through sd card or adb it's not detecting everytime it entered to this menu .. please help me
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
You gave wrong code for booting patched boot.img
It should be as
FASTBOOT FLASH BOOT PATCED_BOOT.IMG
It will permanently root the android pie
You gave the FASTBOOT code only for booting
vineet09i said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
You gave wrong code for booting patched boot.img
It should be as
FASTBOOT FLASH BOOT PATCED_BOOT.IMG
It will permanently root the android pie
You gave the FASTBOOT code only for booting
Click to expand...
Click to collapse
Hey can i use patched boot image on my official update of pie or which version is able to use of magisk?
Emmykay223 said:
Hey can i use patched boot image on my official update of pie or which version is able to use of magisk?
Click to expand...
Click to collapse
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
vineet09i said:
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
Click to expand...
Click to collapse
Yes but twrp is not booting on my pie build because it is showing "failed to find device for partition system" and i am unable to apply update through sd card or through adb i don't know why so i am thinking to follow this steps hope it will work.
vineet09i said:
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
Click to expand...
Click to collapse
Why any module is not installing by magisk it's showing me unable to extract, i followed each and every steps as mentioned above and rooted my Nokia 6 again but it's not installing any module what's the reason behind it?
* Warranty is void
* I'm not responsible for any damage to your phone in mistaking anything specified here
* This guide requires intermediate knowledge
I'm posting this guide because I haven't found any special thread about it, and had to search multiple threads and websites to get a conclusion in how to root Magisk only (without flashing TWRP or any other custom recovery). Focused in not decrypting the phone, or modify any system partition for a full OTA compatibility.
Requirements:
* ADB/Fastboot & Motorola USB drivers installed - (PC)
* Unlocked bootloader - (Phone)
* Stock rom - (Phone)
* Magisk Manager (latest stable version installed on your phone)
* TWRP (compatible to the Moto G6 Play model) - please refer to this thread for more details. ***(Of course, you won't flash it!)
*** PLEASE! REFER TO THE UPDATES BELOW!!! ***
Tutorial:
1. Reboot to bootloader
2. Boot into downloaded TWRP using Fastboot code:
Code:
fastboot boot twrp_downloaded.img
(on TWRP ignore any password by canceling)
3. Backup stock boot image using:
Code:
adb pull /dev/block/platform/soc/7824900.sdhci/by-name/boot stockboot.img
4. Reboot system using ADB code:
Code:
adb reboot system
5. After rebooted, copy backed up stockboot.img to the phone internal memory
6. Install and open Magisk Manager, click [Instal] > [Install] > [Select and Patch a File] and select stockboot.img on internal memory.
7. After boot image patched, copy magisk_patched.img from phone Download folder to PC
8. Reboot to bootloader and flash magisk_patched.img to phone using Fastboot code:
Code:
fastboot flash boot magisk_patched.img
9. After done, reboot system using fastboot code:
Code:
fastboot reboot
10. All done! Open Magisk Manager and check root! For future OTA updates already rooted with Magisk, I recommend this post: https:// www. the custom droid .com/install-ota-update-rooted-android-device-guide/ - (remove spaces )
[UPDATE 1]
I've noticed that Moto G6 simply forces reboot system before update the device, if we go to restore images in Magisk to try it out tutorial post from 10., it'll simply be removed after that.
Even doing so and going ahead to update the device losing Magisk, and still have to back up once more the new updated boot image and patch it on Magisk following my guide above, I got a bootloop patching the newest OTA with Magisk 20.0 (latest).
After almost losing indefinitely root access, I got it done, downgrading Magisk to 19.3.
For doing so, download Magisk 19.3 zip file from GitHub repository and copy it to the SD Card, boot up into TWRP using fastboot (without flashing) then proceed as read-only, after that, install Magisk 19.3 zip file to patch the OTA updated boot image, then it's done. Root it's working properly without updating Magisk.
I don't know exactly why the latest Magisk it is breaking the OTA updated boot image... Whatever, it's a good approach to get root access back after the recent OTA!
I still need to check if this workaround will be working on new OTA's. That's it.
[UPDATE 2]
After recent update - January 2020, my rooting workaround supporting OTA is working properly as followed solution on UPDATE 1, above.
I didn't test using latest Magisk 20.3 apk due the bootloop when patching boot image in Magisk 20. Don't know if that bug has been fixed...
Updating Magisk after successfully rooted using solution above will not result in a bootloop, but I do recommend downgrade Magisk when new OTA is released.
Hello, thank you for this guide. I'm having trouble with the last step, as I also am having a bootloop with the boot image patched with the latest Magisk. Would you care to elaborate on how do I install Magisk 19.3? Since I boot TWRP, but cant find the Downloads folder from the phone, where I put the Magisk-v19.3.zip file. Cheers!
gabardal said:
Hello, thank you for this guide. I'm having trouble with the last step, as I also am having a bootloop with the boot image patched with the latest Magisk. Would you care to elaborate on how do I install Magisk 19.3? Since I boot TWRP, but cant find the Downloads folder from the phone, where I put the Magisk-v19.3.zip file. Cheers!
Click to expand...
Click to collapse
First, if you have the actual boot backup, you'll need to flash it to fix bootloop.
Remember to boot into TWRP (without flashing) to flash it.
* Follow the samples above for the codes if necessary.
After fixing bootloop all you'll need to do is download the Magisk-v19.3.zip from “Magisk GitHub releases” and place it on the external sd card.
Then boot into TWRP (always without flashing) and flash the zip file using TWRP. (Remember to flash to boot image).
It'll simply patch your boot, after that, reboot, if successfully booted go check Magisk.
I search from Pixel 3 XL forum and I think it's pretty useful. I follow those steps and install Custom Magisk to make Edxposed v0.4.6.0_beta.4471 work great:
1. Open magisk manager
2. Get in "settings" and scroll down to find "Update Channel", then click it. Please past "https://raw.githubusercontent.com/solohsu/magisk_files/master/custom_builds/release.json" in the box
3. Refresh magisk manager, and follow the method of magisk patch boot.img method to root your phone:
- Extracting "boot.img" file from google pixel factory image and copy boot.img into your phone
- Open magisk manager to install magisk( choose " install", then " select and patch a file" to patch your boot.img file)
- copy magisk_patched.img to computer and then make your phone enter fastboot mode, then keyin " fast boot flash boot magisk_patched.img"(slot-a & slot-b all being flashed)
- reboot your phone
- done
4. In magisk manager to install " Riru-Core", then get on https://github.com/ElderDrivers/EdXposed/releases to download Edxposed v0.4.6.0_beta.4471 and then install in magisk
5. Recommend download Edxposed manager v4.5.1 to install and then o open Edxposed to install the modules you use.
6. Enable those modules and reboot your phone.
Kris
Much easier, use official Magisk and go there:
https://forum.xda-developers.com/showpost.php?p=80660829&postcount=92
Thanks, mate !
Dark_Eyes_ said:
Much easier, use official Magisk and go there:
https://forum.xda-developers.com/showpost.php?p=80660829&postcount=92
Click to expand...
Click to collapse
"410 GONE" error when click download ...
Kris
Quick and concise how to for obtaining a Stock Boot Image from your Oneplus 8, 8T or 8 Pro device and patching with Magisk to create a fastboot flashable patched boot.img.
DISCLAIMER:
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked, broken or dead devices. This is a high-level
* how to for users with a basic knowledge of ADB and Fastboot. YOU alone are
* choosing to make these modifications, and you are solely responsible for your
* device's fit for use and wellbeing.
*
* Backup your data!
*
*/
PREREQUISITS:
An unpatched Stock Boot.img running on your device
General knowledge and understanding of ADB and Fastboot
Download latest op8, op8p, or op8t Horizon Kernel img from [e.g., op8p_7.img]:
https://dl.akr-developers.com/?dir=oneplus/horizon_kernel/R/images
Download latest Magisk Canary build from Github [e.g., app-debug.apk]:
https://raw.githubusercontent.com/topjohnwu/magisk_files/canary/app-debug.apk
DEVICE/PC OPERATIONS:
→ ADB
Enumerate devices
Code:
adb devices
Boot into Fastboot
Code:
reboot bootloader
→ FASTBOOT
Enumerate devices
Code:
fastboot devices
Determine the current slot (A/B), whichever slot you're on should be the "good" img
Code:
fastboot getvar current-slot
Boot with the custom kernel downloaded from Horizon to use root [NOTE: Include the full path of the img if not in the same directory]
e.g., fastboot boot "C:\Users\User\Downloads\op8p_R7.img"
Code:
fastboot boot xxxxxxx.img
→ ADB
Copy the boot.img from each slot to the root of the device
Code:
adb shell
su
dd if=/dev/block/sde11 of=/sdcard/boot_a.img
dd if=/dev/block/sde35 of=/sdcard/boot_b.img
→ Android Device [NOTE: Some Android 11 devices experience patching issues on the Beta Channel like bootloop] [NOTE: Some users experience issues on Canary like no SIM detected; if so switch to Beta]
Install Magisk app-debug.apk (Canary)
Go to Settings → Update Channel → Canary
Go to Home → Install → Install → Select and Patch A File
Navigate to internal storage and select the stock boot.img [choose the img from whichever slot you're on]
When it’s done patching copy the file, named magisk_patched.img, from the root → Downloads of your device to PC
→ ADB
Code:
reboot bootloader
→ FASTBOOT
Test to ensure it boots before flashing; if not you'll need to patch the other img
Code:
fastboot boot magisk_patched.img
→ Android Device
If the device boots and you have root in the Magisk Manager app, reboot the device into Fastboot then flash the active slot [NOTE: Both slots do not need to be flashed; just the current active slot]
→ FASTBOOT
Flash the patched image file [NOTE: Include the full path of the img if not in the same directory]
e.g., fastboot flash boot_b "C:\Users\User\Downloads\magisk_patched.img"
Code:
fastboot flash boot magisk_patched.img
fastboot reboot
- OR -
Code:
fastboot flash boot_a magisk_patched.img
fastboot reboot
- OR -
Code:
fastboot flash boot_b magisk_patched.img
fastboot reboot
ADDITIONAL RESOURSES:
→ FASTBOOT
If you need to set the other slot to be the active slot use:
Code:
fastboot --set-active=a
- OR -
Code:
fastboot --set-active=b
→ ADB
ADB Magisk Bootloop Fix
Code:
adb shell
magisk --remove-modules
→ OTA Help
Magisk stock boot.img missing fix [NOTE: Android 11 onwards, the /sbin folder might not exist, so Magisk will randomly create a folder under /dev and use it as the base folder]
Rename to: stock_boot_0.img
Compress with gzip = stock_boot_0.img.gz
Copy stock_boot_0.img.gz file to the root of: /data
Edit the config file: /dev/xxxxxxx/.magisk/config → Change SHA1= to 0
Magisk Manager → Uninstall Magisk → Restore Images
→ ADB
Determine the random folder name generated by Magisk on Android 11+
Code:
ls -laR /dev | grep '.magisk/rootdir'
→ ADB
Determine the Boot Image partition location [NOTE: Will list all partitions; look for boot_a and boot_b]
Code:
ls /dev/block/bootdevice/by-name/ -all
Tried some other way on android 11 but failed, so back to android 10.
maybe i won't get android 11 until TWRP is work.
can't easily backup data without root is very annoying, thanks for the work!
I have followed every step, but root only last until I restart my Oneplus.
What am I doing wrong? Why want the device stay rooted?
mrram said:
I have followed every step, but root only last until I restart my Oneplus.
What am I doing wrong? Why want the device stay rooted?
Click to expand...
Click to collapse
Guessing here, but have a second look at these two commands:
Code:
fastboot boot magisk_patched.img
△ This will NOT flash the rooted image, it will only boot up once so you can test it or use it for temporary root
verses
Code:
fastboot flash boot magisk_patched.img
▲ This will flash the rooted image and is used after you've tested the patched image to be sure it doesn't bootloop and to have persistent root
If I use this Horizon kernel to boot with root on 11.0.4.4, could I use directly Magisk 22.0 to root the device permanently? Thanks in advance.
MagikGab said:
If I use this Horizon kernel to boot with root on 11.0.4.4, could I use directly Magisk 22.0 to root the device permanently? Thanks in advance.
Click to expand...
Click to collapse
I only use the Horizon to boot then grab my kernel to patch with Magisk. You could use the Horizon kernel, but you would have to flash it, not just boot it. So, root device, backup stock dtbo, flash Horizon & dtbo, re-root if lost during flash. I would recommend against that until there's a custom recovery available in case there were any issues. Additionally, you must backup your stock dtbo if you ever want to return to stock. You should visit the Horizon thread for more details, but again if you're not familiar with kennel mods you might not want to start learning on a device without a custom recovery.
CarvedArt said:
I only use the Horizon to boot then grab my kernel to patch with Magisk. You could use the Horizon kernel, but you would have to flash it, not just boot it. So, root device, backup stock dtbo, flash Horizon & dtbo, re-root if lost during flash. I would recommend against that until there's a custom recovery available in case there were any issues. Additionally, you must backup your stock dtbo if you ever want to return to stock. You should visit the Horizon thread for more details, but again if you're not familiar with kennel mods you might not want to start learning on a device without a custom recovery.
Click to expand...
Click to collapse
I'd like only to root my device, remaining as more stock as possible, for now. If I want to avoid using a custom kernel (also for the rooting process), should I extract the boot.img with Python, then patch it with Magisk 22? Thanks in advance for your reply, but I'm coming from a Xiaomi that was quite easier to root
MagikGab said:
I'd like only to root my device, remaining as more stock as possible, for now. If I want to avoid using a custom kernel (also for the rooting process), should I extract the boot.img with Python, then patch it with Magisk 22? Thanks in advance for your reply, but I'm coming from a Xiaomi that was quite easier to root
Click to expand...
Click to collapse
Just follow the steps above -- that'll get you a stock kernel (your current kernel) patched with Magisk and permanently rooted. The above process is only using the Horizon kernel to boot your device with root so that you can extract your kernel and patch it. The final result will be as stock as you can get with root.
Hey everyone. OP8 Pro user here. Just took OTA going from 11.0.9.9 running Magisk Canary 23 to the newest 11.0.10.10. I restored images before taking the OTA and reinstalled magisk to the other slot like I always do to retain root. Ive now lost root and am trying to boot the last two versions of the Horizon kernel. Ive tried the two latest ones (r9.2 and r9.2.1 from February 2021) and while they do boot my phone, I cant get SU access to extract the stock images.
Anything else that anyone things I should try? All i want from Christmas is root.
Isn't there a more easy way to obtain root?
That's strange. I use OnePlus smartphones with LineageOS for years now and cannot remember to execute such a complicated procedure. Just now I got a OnrPlus 8, installed LineageOS and Magisk and restored my apps with Titanium. So, it definitely worked.
Now, after a Lineage system update, root is gone.
Unfortunately I cannot tell exactly how I installed Magisk. I have a very poor memory. Think I just installed the app and said either just "install" or patched the zip with TRWP
But I definitely never downloaded or extracted any boot image manually.
Has anyone an explanation for this?
Even more strange: I just tried to flash magisk.zip again with TRWP. Now it tells me
"Magisk patched boot image detected"
and later:
"Failed to mount '/system_root' (Device or resource busy)"
After reboot the Magisk app now offers me three choices in the install tab:
- choose a file and patch (only this one existed before)
- direct installation (recommended)
- install into inactive slot (after OTA)
I don't understand the last one and tried the recommendet one.
Now, root is there again. Do I have to do this after each update? With my OnePlus5 I didn't.
Unfortunately I have another problem with my OnePlus8 and Lineage:
I'm using AdAway which replaces the hosts file, but on my OP8 it cannot.
"Unable to cppy the hosts file to /System partition. Please check if the Magisk Systemless module is active"
What does it mean? The Magisk app says: "ramdisk yes"
tosho1 said:
Unfortunately I have another problem with my OnePlus8 and Lineage:
I'm using AdAway which replaces the hosts file, but on my OP8 it cannot.
"Unable to cppy the hosts file to /System partition. Please check if the Magisk Systemless module is active"
What does it mean? The Magisk app says: "ramdisk yes"
Click to expand...
Click to collapse
Magisk → Settings (Gear icon) → Systemless hosts ← Click it
tosho1 said:
Isn't there a more easy way to obtain root?
That's strange. I use OnePlus smartphones with LineageOS for years now and cannot remember to execute such a complicated procedure. Just now I got a OnrPlus 8, installed LineageOS and Magisk and restored my apps with Titanium. So, it definitely worked.
Now, after a Lineage system update, root is gone.
Unfortunately I cannot tell exactly how I installed Magisk. I have a very poor memory. Think I just installed the app and said either just "install" or patched the zip with TRWP
But I definitely never downloaded or extracted any boot image manually.
Has anyone an explanation for this?
Even more strange: I just tried to flash magisk.zip again with TRWP. Now it tells me
"Magisk patched boot image detected"
and later:
"Failed to mount '/system_root' (Device or resource busy)"
After reboot the Magisk app now offers me three choices in the install tab:
- choose a file and patch (only this one existed before)
- direct installation (recommended)
- install into inactive slot (after OTA)
I don't understand the last one and tried the recommendet one.
Now, root is there again. Do I have to do this after each update? With my OnePlus5 I didn't.
Click to expand...
Click to collapse
LineageOS is not the stock ROM so it's slightly different and not covered in this thread.
Thank you, CarvedArt. I wasn't aware of this.
Does anyone have the latest stable Android 13 patched boot image for the IN2015 that they can share with me ?
Hello guys, I already have the bootloader unlocked and also root, I need TWRP to download some rom, as you know the phone is not so good for games, also I have One UI Core 5.0, so it is slower.
Any solution?
I also overclocked using Hktweaks, which improved but not that much.
Hello, how did you root? I have been waiting for a stable form for a long time, and I am also waiting for TWRP for Android 12 on the A127M (There are only 11)
Jeison Dg said:
Hello guys, I already have the bootloader unlocked and also root, I need TWRP to download some rom, as you know the phone is not so good for games, also I have One UI Core 5.0, so it is slower.
Any solution?
I also overclocked using Hktweaks, which improved but not that much.
Click to expand...
Click to collapse
I have one
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (not just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
physwizz said:
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (not just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
Click to expand...
Click to collapse
SM-A127M
Hi thanks...
I'm new to this, I stayed in this step, could you help me?
I already have an unlocked bootloader, and also root patched with normal magisk (patched with AP, does that mean that I already have boot.img and vbmeta.img patched?, and they are no longer needed?) Is some kind of magisk needed for my device?
I don't understand the methods well, I'm new.
So I would just have to put the twrp file that you left me and flash it by AP with Odin? and that's all? I already have a custom recovery? I don't understand well, sorry.
Jeison Dg said:
SM-A127M
Hi thanks...
I'm new to this, I stayed in this step, could you help me?
I already have an unlocked bootloader, and also root patched with normal magisk (patched with AP, does that mean that I already have boot.img and vbmeta.img patched?, and they are no longer needed?) Is some kind of magisk needed for my device?
Click to expand...
Click to collapse
You must use delta magisk because normal magisk won't patch vbmeta
Root for all Exynos 850 devices.
Root for all Exynos 850 devices. A. Root part 1 - Preparing the file I accept no responsibility for bricked phones but I will help you to recover. 1. Download the exact firmware (including upgrade date) for your device from https://samfrew.com...
forum.xda-developers.com
physwizz said:
Debes usar delta magisk porque magisk normal no parcheará vbmeta
XDA Forums
Android Forum for Mobile Phones, Tablets, Hardware & App Development
forum.xda-developers.com
Click to expand...
Click to collapse
http://
I understand, now how do I get magisk delta?
Jeison Dg said:
I understand, now how do I get magisk delta?
Click to expand...
Click to collapse
Tap on the link in post 7
OK thanks.
so now i type multidisabler twice in advanced, terminal. I reboot the twrp and make a backup and already reboot the device?
broo, I already have twrp but the internal storage does not appear, I already wrote multidisable twice and restarted the twrp
Jeison Dg said:
broo, I already have twrp but the internal storage does not appear, I already wrote multidisable twice and restarted the twrp
Click to expand...
Click to collapse
Did you do factory reset from stock recovery?
Go here
Exynos 850 Resources ]TWRPs] [Kernels]
Devices post#1 Root method post#2 TWRP post#3 Kernels post#4 Debloaters post #5 wizzROM creators post #6 Exynos 850 Devices 1. A12s A127f & A127m 2. M12 M127f & M127g 3. A21s A217f & A217m 4. F12s F127g 5. A13 A135f & A135m 6. M13...
forum.xda-developers.com
Thank you very much, I already have twrp, now I need a custom rom or a gsi and how to install it, any tutorial?