Orange Fox v2
From @
Modified by physwizz for a12s(a127f) S
Android 12
Installation
Post #3
@physwizz
Afaneh TWRP modified by physwizz
For a12s S
Installation
Post #3
@physwizz
Installing Custom Recoveries Exynos 850
Recommended to use Orange Fox to format and TWRP to install GSIs
1. Install Orange Fox
2. Decrypt the data (Format and run multidisabler twice)
3. Reboot to recovery (not just reboot)
4. Install TWRP recovery.img into recovery partition.
5. Reboot to recovery.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
(For Pitch-black just install the zip)
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with special magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Connect phone to PC
3. Go to Download mode
4. Flash recovery tar into ap with Odin
Part B (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched with the special a217 magisk? (This contains the patched boot.img and vbmeta.img)
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
https://t.me/a127f_res/54
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data, not just wipe?
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
@physwizz
Did anybody have trouble installing these recoveries?
physwizz said:
Did anybody have trouble installing these recoveries?
Click to expand...
Click to collapse
No i downgraded to andro11 but mai binari is: fakin 8
i've unlocked the bootloader of my phone, and it boots fine with stock recovery & oneui core 3.1, but whenever i install twrp or a gsi, my phone ceases to boot. any ideas?
tekkitheidiot said:
i've unlocked the bootloader of my phone, and it boots fine with stock recovery & oneui core 3.1, but whenever i install twrp or a gsi, my phone ceases to boot. any ideas?
Click to expand...
Click to collapse
Do u install TWRP through Odin?
C-Andy said:
Do u install TWRP through Odin?
Click to expand...
Click to collapse
The twrp must be built for a125w.
If you want I can modify the one you're trying but you need to send me your a125w stock recovery.img.lz4
physwizz said:
The twrp must be built for a125w.
If you want I can modify the one you're trying but you need to send me your a125w stock recovery.img.lz4
Click to expand...
Click to collapse
hello, ive been looking for a twrp that is compatible with sm-a125w because that is my model. how would i send you the stock recovery for this?
imdrew1234 said:
hello, ive been looking for a twrp that is compatible with sm-a125w because that is my model. how would i send you the stock recovery for this?
Click to expand...
Click to collapse
Just post it.
Attach files
physwizz said:
Just post it.
Attach files
Click to expand...
Click to collapse
here is the file. i included boot and vbmeta as well.
the link: https://drive.google.com/drive/folders/1L5491qUjTXUHKxXdLLlSOLBmwFY1rou-?usp=sharing
imdrew1234 said:
here is the file. i included boot and vbmeta as well.
the link: https://drive.google.com/drive/folders/1L5491qUjTXUHKxXdLLlSOLBmwFY1rou-?usp=sharing
Click to expand...
Click to collapse
Unzip to find the tar file.
Installing instructions in next post
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
thank you so much ive been looking for this forever!
physwizz said:
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
Click to expand...
Click to collapse
i was also wondering if you knew why i cant make modifications to /system partition. whenever i check it in mount on the main screen of twrp /system still doesn't show. I wanted to get the pixel experience rom but i cannot due to this issue im facing since the system partition does not show as a partition i can flash the custom rom to as a gsi.
imdrew1234 said:
i was also wondering if you knew why i cant make modifications to /system partition. whenever i check it in mount on the main screen of twrp /system still doesn't show. I wanted to get the pixel experience rom but i cannot due to this issue im facing since the system partition does not show as a partition i can flash the custom rom to as a gsi.
Click to expand...
Click to collapse
Do you see system.img as a partition?
physwizz said:
Do you see system.img as a partition?
Click to expand...
Click to collapse
i do. only data and system image. data doesn’t show as flashable and system image is already full plus not enough storage for the custom rom. i think that there is supposed to be a prompt from twrp when you load into it to allow modifications to the system partition but this prompt does not show on this twrp which is weird. i cannot find a solution to this issue.
i
imdrew1234 said:
i do. only data and system image. data doesn’t show as flashable and system image is already full plus not enough storage for the custom rom. i think that there is supposed to be a prompt from twrp when you load into it to allow modifications to the system partition but this prompt does not show on this twrp which is weird. i cannot find a solution to this issue.
Click to expand...
Click to collapse
If you want to install a gsi to system.img you can.
You may need to go to advanced terminal and type wipe system Or wipe SYSTEM_ROOT
physwizz said:
If you want to install a gsi to system.img you can.
You may need to go to advanced terminal and type wipe system Or wipe SYSTEM_ROOT
Click to expand...
Click to collapse
but what do i do if the system image is only 3.1gb and the rom is 3.48 gb? is there any way i can repartition it or something?
imdrew1234 said:
but what do i do if the system image is only 3.1gb and the rom is 3.48 gb? is there any way i can repartition it or something?
Click to expand...
Click to collapse
Choose a smaller gsi
physwizz said:
Choose a smaller gsi
Click to expand...
Click to collapse
i can’t seem to find any other custom roms for my model sm-a125w they are all for the sm-a125f model and i don’t want to brick my phone. do you think the f model roms would work on my model or have any rom suggestions?
physwizz said:
Choose a smaller gsi
Click to expand...
Click to collapse
whenever i try to wipe system_root it says inaccessible or not found in twrp terminal. i dont know whats going wrong here.
imdrew1234 said:
whenever i try to wipe system_root it says inaccessible or not found in twrp terminal. i dont know whats going wrong here.
Click to expand...
Click to collapse
Wipe system
tr
physwizz said:
Wipe system
Click to expand...
Click to collapse
tried that as well and same error occurs.
physwizz twrp v3
For m127f and f127g
Android 11 , 12 & 13
Extra partitions added
Installation
Post 2
Screenshots
physwizz(Really Old Dev) in Exynos 850 Testing & Development
t.me
Exynos 850 Resources
t.me
physwizz(Really Old Dev) in Exynos 850 Testing & Development
t.me
Code
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
===========================
A12s Channel: https://t.me/a127f_res
A12s group: https://t.me/a12schat
Physwizz group: https://t.me/physwizz3
Physwizz Channel: https://t.me/physwizz2
@physwizz
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (nor just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
physwizz twrp v3
For a127f and a127m
Android 11 , 12 & 13
Extra partitions added
Installation
Post 2
Screenshots
physwizz(Really Old Dev) in Exynos 850 Testing & Development
t.me
Exynos 850 Resources
t.me
physwizz(Really Old Dev) in Exynos 850 Testing & Development
t.me
Code
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
===========================
A12s Channel: https://t.me/a127f_res
A12s group: https://t.me/a12schat
Physwizz group: https://t.me/physwizz3
Physwizz Channel: https://t.me/physwizz2
@physwizz
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (nor just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
M04 twrp
MediaTek Helio P35 MT6765
Extra partitions added
No screen time out
Installation Instructions
Post 2
@physwizz
Device Tree
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Note: some phones may need to be connected a pc or other device to boot to recovery
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp tar file into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
Method 5
If you have already installed recovery and decrypted.
install from system
1. extract recovery.img from tar file
2. open terminal app
3. navigate to folder containing recovery.img
4. type the following
dd if=/sdcard/recovery.img of=/dev/block/by-name/recovery
read t -5;reboot recovery
Method 6
If you have already installed recovery and decrypted.
Try bugjaeger mobile adb-usb otg app from playstore
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
If it doesn't work try this
Physwizz Collection
Decrypt. If multidisabler doesn't work try this method. 1. Copy /vendor/etc/fstab.**** over to another folder. 2. Edit it to remove the line containing the word "encryption" 3. Boot into twrp 4. Use twrp file manager to replace the fstab file with the edited one. 5. Format data (not just...
t.me
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
9.For touch issues use a usb mouse
physwizz(Really Old Dev) in physwizz testing & discussion
If touch doesn't work on twrp, connect a usb mouse Everyone has an old mouse at home and the adapter costs less than a cup of coffee
t.me
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
Let me know if it boots