Database Info

A12s Exynos 850 Development A127f Android 12 Recoveries

Orange Fox v2
From @
Modified by physwizz for a12s(a127f) S
Android 12
Installation
Post #3
@physwizz

Afaneh TWRP modified by physwizz
For a12s S
Installation
Post #3
@physwizz

Installing Custom Recoveries Exynos 850
Recommended to use Orange Fox to format and TWRP to install GSIs
1. Install Orange Fox
2. Decrypt the data (Format and run multidisabler twice)
3. Reboot to recovery (not just reboot)
4. Install TWRP recovery.img into recovery partition.
5. Reboot to recovery.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
(For Pitch-black just install the zip)
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with special magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Connect phone to PC
3. Go to Download mode
4. Flash recovery tar into ap with Odin
Part B (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched with the special a217 magisk? (This contains the patched boot.img and vbmeta.img)
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
https://t.me/a127f_res/54
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data, not just wipe?
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
@physwizz

Did anybody have trouble installing these recoveries?

physwizz said:
Did anybody have trouble installing these recoveries?
Click to expand...
Click to collapse
No i downgraded to andro11 but mai binari is: fakin 8

A12s Exynos 850 Development [TWRP] [A127] physwizz

physwizz twrp v3
For a127f and a127m
Android 11 , 12 & 13
Extra partitions added
Installation
Post 2
Screenshots
physwizz(Really Old Dev) in Exynos 850 Testing & Development
t.me
Exynos 850 Resources
t.me
physwizz(Really Old Dev) in Exynos 850 Testing & Development
t.me
Code
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
===========================
A12s Channel: https://t.me/a127f_res
A12s group: https://t.me/a12schat
Physwizz group: https://t.me/physwizz3
Physwizz Channel: https://t.me/physwizz2
@physwizz

Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (nor just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz

Question Is there TWRP for SM-A127M U7?

Hello guys, I already have the bootloader unlocked and also root, I need TWRP to download some rom, as you know the phone is not so good for games, also I have One UI Core 5.0, so it is slower.
Any solution?
I also overclocked using Hktweaks, which improved but not that much.

Hello, how did you root? I have been waiting for a stable form for a long time, and I am also waiting for TWRP for Android 12 on the A127M (There are only 11)

Jeison Dg said:
Hello guys, I already have the bootloader unlocked and also root, I need TWRP to download some rom, as you know the phone is not so good for games, also I have One UI Core 5.0, so it is slower.
Any solution?
I also overclocked using Hktweaks, which improved but not that much.
Click to expand...
Click to collapse
I have one

Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (not just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz

physwizz said:
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (not just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
Click to expand...
Click to collapse
SM-A127M
Hi thanks...
I'm new to this, I stayed in this step, could you help me?
I already have an unlocked bootloader, and also root patched with normal magisk (patched with AP, does that mean that I already have boot.img and vbmeta.img patched?, and they are no longer needed?) Is some kind of magisk needed for my device?

I don't understand the methods well, I'm new.
So I would just have to put the twrp file that you left me and flash it by AP with Odin? and that's all? I already have a custom recovery? I don't understand well, sorry.

Jeison Dg said:
SM-A127M
Hi thanks...
I'm new to this, I stayed in this step, could you help me?
I already have an unlocked bootloader, and also root patched with normal magisk (patched with AP, does that mean that I already have boot.img and vbmeta.img patched?, and they are no longer needed?) Is some kind of magisk needed for my device?
Click to expand...
Click to collapse
You must use delta magisk because normal magisk won't patch vbmeta
Root for all Exynos 850 devices.
Root for all Exynos 850 devices. A. Root part 1 - Preparing the file I accept no responsibility for bricked phones but I will help you to recover. 1. Download the exact firmware (including upgrade date) for your device from https://samfrew.com...
forum.xda-developers.com

physwizz said:
Debes usar delta magisk porque magisk normal no parcheará vbmeta
XDA Forums
Android Forum for Mobile Phones, Tablets, Hardware & App Development
forum.xda-developers.com
Click to expand...
Click to collapse
http://

I understand, now how do I get magisk delta?

Jeison Dg said:
I understand, now how do I get magisk delta?
Click to expand...
Click to collapse
Tap on the link in post 7

OK thanks.
so now i type multidisabler twice in advanced, terminal. I reboot the twrp and make a backup and already reboot the device?

broo, I already have twrp but the internal storage does not appear, I already wrote multidisable twice and restarted the twrp

Jeison Dg said:
broo, I already have twrp but the internal storage does not appear, I already wrote multidisable twice and restarted the twrp
Click to expand...
Click to collapse
Did you do factory reset from stock recovery?
Go here
Exynos 850 Resources ]TWRPs] [Kernels]
Devices post#1 Root method post#2 TWRP post#3 Kernels post#4 Debloaters post #5 wizzROM creators post #6 Exynos 850 Devices 1. A12s A127f & A127m 2. M12 M127f & M127g 3. A21s A217f & A217m 4. F12s F127g 5. A13 A135f & A135m 6. M13...
forum.xda-developers.com

Thank you very much, I already have twrp, now I need a custom rom or a gsi and how to install it, any tutorial?

Galaxy A14 (SM-A145 and SM-A146) Custom Kernels and TWRPs

Galaxy A14
=========
A145P A145R 4g Mediatek MT6769 (a14m)
A145f A145m 4g Exynos 850 (a14)
A146B A146M 5g Exynos 1330 (a14x)
A146p A146w 5g Mediatek MT6833 (a14xm)
SM-A145P 4g and SM-A146P 5g Custom Kernels
Kernel source code
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
NOTE: TWRPs in posts 3, 4 & 5

Installing physwizz custom kernels
INSTALL AT YOUR OWN RISK
I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES
But I will help any well-mannered person to recover.
Note: physwizz kernels work best with debloated stock or with wizzROM
Other custom ROMs may not be supported
A. Preparation
1. Root the phone
2. Compress your patched boot.img to make boot.tar
3. Copy boot.tar to PC
Note: If you have previously installed a custom dtbo, you may need to flash stock dtbo
Physwizz Collection
Dtbo installer Extract stock dtbo.img from your firmware. Add to the zip using zarchiver. Use stock dtbo.img from your baseband (not your kernel or your ROM)
t.me
B. Installation
Method 1
Install from twrp
Reboot to recovery
Backup boot and dtbo (if available)
Install kernel zip or boot.img
Wipe both caches
Reboot
Method 2
Install kernel from terminal.
1. Download magisk module (magic flash zip) https://github.com/Magisk-Modules-Alt-Repo/magic-flash
2. Install module and reboot.
3. Open terminal.
4. Navigate to folder containing kernel zip.
Use
ls to list contents
and
cd to change directories
5. Type su
6. Type flash kernel zip
7. Reboot
Method 3
Using ADB
Install adb tools on pc
Connect to PC
Copy zip file to adb folder on pc
Open terminal on pc
Navigate to adb folder
Type
adb sideload filename.zip
Method 4
Using boot.img
Install AIK Mobile from magisk modules https://t.me/physwizz2/82
Use rootexplorer to access
/data/local/AIK-MOBILE
Add patched boot.img and tap unpackimg.sh
Exit the folder and return to see the files.
Edit the files (eg to add a new Image
rename Image to boot.img-zImage and insert in split-image folder)
Tap repackimg.sh
Rename new_image.img to boot.img
Compress boot.img to boot.tar
Copy boot.tar to PC
Reboot phone to download mode
Install boot.tar from odin
Method 5
Using a second phone
1. Prepare boot.img as in Method 4.
2. Go here
Physwizz Collection
Installing boot.img using a second phone. You can install a new kernel without a PC by using patched boot.img from phone1 to phone2 Preparation 1. Download the exact firmware (including upgrade date) for your device from https://samfrew.com or https://www.samfirmware.net/ or...
t.me
C. Removal
Method 1
Reboot to recovery
Restore boot and dtbo
Reboot
Method 2.
Reboot phone to download mode
Install patched boot.tar or patched-ap.tar from odin
@physwizz

I've also built a twrp for a145p if someone wants to test it
Note: v2 in post #25
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
Let me know if it works ok
Device Tree
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
@physwizz

TWRP for A146B and A146M (Exynos 1330)
See post #82
Galaxy A14 (SM-A145 and SM-A146) Custom Kernels and TWRPs
Galaxy A14 SM-A145P 4g and SM-A146P 5g Custom Kernels Kernel source code https://github.com/physwizz?tab=repositories NOTE: TWRPs in posts 3, 4 & 5
forum.xda-developers.com
Device Tree
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com

Twrp for a146p 5g Mediatek
Good working version in post #46
Galaxy A14 (SM-A145 and SM-A146) Custom Kernels and TWRPs
Galaxy A14 SM-A145P 4g and SM-A146P 5g Custom Kernels Kernel source code https://github.com/physwizz?tab=repositories NOTE: TWRPs in posts 3, 4 & 5
forum.xda-developers.com
Device Tree
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com

A145f TWRP is here
Exynos 850 Resources ]TWRPs] [Kernels]
Devices post#1 Root method post#2 TWRP post#3 Kernels post#4 Debloaters post #5 wizzROM creators post #6 Exynos 850 Devices 1. A12s A127f & A127m 2. M12 M127f & M127g 3. A21s A217f & A217m 4. F12s F127g 5. A13 A135f & A135m 6. M13...
forum.xda-developers.com

Will this work for A146U?

Will this work for A146U?

SinfulHero said:
Will this work for A146U?
Click to expand...
Click to collapse
Can you root the device?

physwizz said:
Can you root the device?
Click to expand...
Click to collapse
Working on it. Let you know if I do.

SinfulHero said:
Working on it. Let you know if I do.
Click to expand...
Click to collapse
I believe it may be possible if you flash the Canadian a146w firmware

Still no feedback?
There are a lot of of downloads and I still don't know if the TWRPs work!

Lots of downloads and no feedback.
I don't own any of these devices so I can't test them.

Im also wondering if this will work for A146U? Anyone got it working?

SupremePhone777 said:
Im also wondering if this will work for A146U? Anyone got it working?
Click to expand...
Click to collapse
The Canadian version has worked on other Devices.
I can port the TWRP

How hard do you think it will be to root this. I havent used custom Kernels in years.

SupremePhone777 said:
How hard do you think it will be to root this. I havent used custom Kernels in years.
Click to expand...
Click to collapse
Just follow my instructions

Im needed twrp for SM-A145R, a145-twrp-build1 doesn't work for me.

straightcore said:
Im needed twrp for SM-A145R, a145-twrp-build1 doesn't work for me.
Click to expand...
Click to collapse
Send me your recovery.img.lz4 and I'll see what I can do

here
thx

M04 twrp

M04 twrp
MediaTek Helio P35 MT6765
Extra partitions added
No screen time out
Installation Instructions
Post 2
@physwizz
Device Tree
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com

Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Note: some phones may need to be connected a pc or other device to boot to recovery
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp tar file into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
Method 5
If you have already installed recovery and decrypted.
install from system
1. extract recovery.img from tar file
2. open terminal app
3. navigate to folder containing recovery.img
4. type the following
dd if=/sdcard/recovery.img of=/dev/block/by-name/recovery
read t -5;reboot recovery
Method 6
If you have already installed recovery and decrypted.
Try bugjaeger mobile adb-usb otg app from playstore
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
If it doesn't work try this
Physwizz Collection
Decrypt. If multidisabler doesn't work try this method. 1. Copy /vendor/etc/fstab.**** over to another folder. 2. Edit it to remove the line containing the word "encryption" 3. Boot into twrp 4. Use twrp file manager to replace the fstab file with the edited one. 5. Format data (not just...
t.me
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
9.For touch issues use a usb mouse
physwizz(Really Old Dev) in physwizz testing & discussion
If touch doesn't work on twrp, connect a usb mouse Everyone has an old mouse at home and the adapter costs less than a cup of coffee
t.me
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz

Let me know if it boots