Related
Since TWRP is unbootable under this build, you have to use patched boot trick to root this phone.
However, only Magisk 17.1 is usable on this build, Magisk 17.2 - 18.0 can't be installed properly.
So I made a custom update channel that fixed to Magisk 17.1 to assist me.
This guide requires unlocked bootloader - still, I won't introduce how to unlock it here, please Google for it.
Click to expand...
Click to collapse
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
OK, thanks for the info.
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
I hope you can build TWRP for Android P variant of Chinese and it works on non-unlockbootloader. Like you used to do with Oreo? .Thanks
This did not work with TA-1021 while i have pi installed with twrp and patched boot with magisk 16.1 but it do not work not even root access just keep recovery unchanged(twrp).
It says deviceid locked ple if i patch boot with 17.1 what to do! google pay and banking apps dont work.
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
Can we use official TWRP recovery (3.2.3 made for PLE)
On pie 612H CN - OF YOUR HOMEBREW
and also on 612H ww ??
Please tell
---------- Post added at 06:12 AM ---------- Previous post was at 06:05 AM ----------
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
Can we install this TWRP recovery on Chinese firmware (or ww firmware of ta-1003)or it can be flashed only on PLE versions
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
Can I install D1C-612H-WW over 612H-CN using OST ??
OST show that the image is broken
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
On rebooting Android root gone????
dont work for me
edit: worsk now over ND1-612C-0-00WW , but for firm official for n5 (612h-0-00WW ) not works, ist patched the xploit for magisk 17 and up
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
Please help I have working 1003 ww pi installed on Ta-1021 and initially rooted using Chinese twrp with magisk later I tried to install update of twrp recovery got crashed and could not enter recovery tried to flash with Qualcomm tools can enter into Edl phone detected but frimware files doesn't flash some errors. Now result is I can operate my phone magisk 16.1 installed but useless. Banking apps don't work. Factory reset don't work. *#*#874#*#* says file not found (may be because I don't have recovery). Ost la as usual don't work. Please help!
Please help me i am on oreo version .. and i have flashed twrp recovery on my nokia 6 (TA - 1021) ..
THE Problem is when i reboot to recovery it's not booting in twrp but it's booting on custome recovery ..
I need pc everytime , if i want to boot it on twrp .
I have to run command every time to boot in on twrp recovery ..
Is there any way to directly boot it on twrp recovery not in custom recovery ? Please help me
@hikari_calyx Does fastboot boot work for you on pie? For me, it does not. Almost shat my pants thinking my TWRP doesn't work but it does in fact work, just fastboot booting it does not work.
Finally got the official pie update on my TA-1033. (unlocked bootloader)
The standard versions of TWRP 3.2.3.0 / Magisk 17.3 / Magisk Manager 6.0.1 worked perfectly.
As above, "fastboot boot" doesn't work, but "fastboot flash" etc. does.
Happy days.
Not working for me please can you tell the procedure step by step as i tried your steps but didn't happen anything please
---------- Post added at 06:29 PM ---------- Previous post was at 06:26 PM ----------
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
Not working i have unlocked bootloader but i tried to flash twrp and it's not booting on it any other solution please let me know .
Can you help me please my device is showing me this on my recovery , what's an issue please reply as soon as possible i can't even apply update through sd card or adb it's not detecting everytime it entered to this menu .. please help me
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
You gave wrong code for booting patched boot.img
It should be as
FASTBOOT FLASH BOOT PATCED_BOOT.IMG
It will permanently root the android pie
You gave the FASTBOOT code only for booting
vineet09i said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
You gave wrong code for booting patched boot.img
It should be as
FASTBOOT FLASH BOOT PATCED_BOOT.IMG
It will permanently root the android pie
You gave the FASTBOOT code only for booting
Click to expand...
Click to collapse
Hey can i use patched boot image on my official update of pie or which version is able to use of magisk?
Emmykay223 said:
Hey can i use patched boot image on my official update of pie or which version is able to use of magisk?
Click to expand...
Click to collapse
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
vineet09i said:
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
Click to expand...
Click to collapse
Yes but twrp is not booting on my pie build because it is showing "failed to find device for partition system" and i am unable to apply update through sd card or through adb i don't know why so i am thinking to follow this steps hope it will work.
vineet09i said:
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
Click to expand...
Click to collapse
Why any module is not installing by magisk it's showing me unable to extract, i followed each and every steps as mentioned above and rooted my Nokia 6 again but it's not installing any module what's the reason behind it?
Can you use Android Q on the pixel A along with rooting?
sillyshyme said:
Can you use Android Q on the pixel A along with rooting?
Click to expand...
Click to collapse
Unfortunately, not. The pixel 3, 3a as well as the xl versions of both currently do not have magisk for Android q. The dev is working on it though. Keep your ear to the ground
Sent from my Pixel 3a using Tapatalk
Yes. The Pixel 3/3a versions use logical partitions in the Q beta. and it sounds like it's taking a major re-write to support it. I believe it is called system-as-root. The developer John Wu has been posting about it on Twitter. https://twitter.com/topjohnwu
Looks like Magisk for Q and the Pixel 3s is done: https://twitter.com/topjohnwu/status/1143762674666229762?s=09
12paq said:
Looks like Magisk for Q and the Pixel 3s is done: https://twitter.com/topjohnwu/status/1143762674666229762?s=09
Click to expand...
Click to collapse
It's pushed to the Cannery build https://twitter.com/topjohnwu/status/1144159892430659584
Magisk and TWRP all in the same day!
@pharpe wait TWRP got released?
Tiebe said:
@pharpe wait TWRP got released?
Click to expand...
Click to collapse
https://forum.xda-developers.com/pixel-3a/development/twrp-3-3-1-pixel-3a-t3943413
did any one successfully root q ?
I just patched the Q boot image with Magisk Canary and flashed in fastboot. Looks like root is working.
Update. I just installed Adawy and can confirm root is working. Here are the steps I used. This assumes you have latest ADB and fastboot setup
Install Canary Magisk Manager https://raw.githubusercontent.com/topjohnwu/magisk_files/master/canary_builds/app-release.apk
Downloaded the Q Beta image here https://developer.android.com/preview/download.html
Unzip and then unzip then unzip the image-sargo-qpp4.190502.019.zip file. You should see the boot.img.
Copy the boot.img onto your phone
Open Magisk Manager
Set the Repo channel in Magisk Manager to use Canary
Install Magisk and select patch boot image option
Find the boot.img file from step 4
Magisk will path the file and create magisk_patched.img
Copy magisk_patched.img back to computer
Reboot phone into bootloader
From computer run: fastboot flash boot magisk_patched.img
Reboot phone. Check Magisk Manager
Make sure you you click the Systemless Hosts button in Magisk Manager if you want top install Adaway.
pharpe said:
I just patched the Q boot image with Magisk Canary and flashed in fastboot. Looks like root is working.
Update. I just installed Adawy and can confirm root is working. Here are the steps I used. This assumes you have latest ADB and fastboot setup
Install Canary Magisk Manager https://raw.githubusercontent.com/topjohnwu/magisk_files/master/canary_builds/app-release.apk
Downloaded the Q Beta image here https://developer.android.com/preview/download.html
Unzip and then unzip then unzip the image-sargo-qpp4.190502.019.zip file. You should see the boot.img.
Copy the boot.img onto your phone
Open Magisk Manager
Set the Repo channel in Magisk Manager to use Canary
Install Magisk and select patch boot image option
Find the boot.img file from step 4
Magisk will path the file and create magisk_patched.img
Copy magisk_patched.img back to computer
Reboot phone into bootloader
From computer run: fastboot flash boot magisk_patched.img
Reboot phone. Check Magisk Manager
Make sure you you click the Systemless Hosts button in Magisk Manager if you want top install Adaway.
Click to expand...
Click to collapse
Yeah, can confirm, did this earlier today!
Just a question, did you have the issue that many apps show up in the appdrawer of pixel launcher, even if they shouldnt? (like Google PDF Reader, Sd Maid unlock or sideloaded Pixel livewallpapers etc.)
I guess its because of the bootloader is unlocked (for security reasons)?! Just really weird. No other issues observed till now.
peace!
Not sure I understand the issue. Why do you think they should not be in the app drawer? Do you have these apps installed? I've had no change in app drawer behavior since installing Magisk.
removed
pharpe said:
Not sure I understand the issue. Why do you think they should not be in the app drawer? Do you have these apps installed? I've had no change in app drawer behavior since installing Magisk.
Click to expand...
Click to collapse
To reproduce: download Googles pdf reader app and it will show up in your apps. When you open it, it takes you to the app info. Normally it does not show up, because it's just for viewing pdf's. It's the same with other apps that normally have no icon in the launcher.
Edit: saw your 2nd post. Case in point, i removed my link.
bejunk said:
To reproduce: download Googles pdf reader app and it will show up in your apps. When you open it, it takes you to the app info. Normally it does not show up, because it's just for viewing pdf's. It's the same with other apps that normally have no icon in the launcher.
Edit: saw your 2nd post. Case in point, i removed my link.
Click to expand...
Click to collapse
Interesting. I never realize that. I keep all my apps organized in folders so I only go to the app drawer for things I rarely use. I just assumed everything that was installed was in there.
pharpe said:
I just patched the Q boot image with Magisk Canary and flashed in fastboot. Looks like root is working.
Update. I just installed Adawy and can confirm root is working. Here are the steps I used. This assumes you have latest ADB and fastboot setup
Install Canary Magisk Manager https://raw.githubusercontent.com/topjohnwu/magisk_files/master/canary_builds/app-release.apk
Downloaded the Q Beta image here https://developer.android.com/preview/download.html
Unzip and then unzip then unzip the image-sargo-qpp4.190502.019.zip file. You should see the boot.img.
Copy the boot.img onto your phone
Open Magisk Manager
Set the Repo channel in Magisk Manager to use Canary
Install Magisk and select patch boot image option
Find the boot.img file from step 4
Magisk will path the file and create magisk_patched.img
Copy magisk_patched.img back to computer
Reboot phone into bootloader
From computer run: fastboot flash boot magisk_patched.img
Reboot phone. Check Magisk Manager
Make sure you you click the Systemless Hosts button in Magisk Manager if you want top install Adaway.
Click to expand...
Click to collapse
just to make sure i've got this clear: this method allows taking OTA updates via this method right? because patching the boot.img takes a backup of the unpatched image?
c_tho said:
just to make sure i've got this clear: this method allows taking OTA updates via this method right? because patching the boot.img takes a backup of the unpatched image?
Click to expand...
Click to collapse
That is my understanding from what I have read but I have not actually done it. You would uninstall via Magisk and it restores the original boot.img that it has backed-up. Then you are back to stock to take the OTA.
If you install twrp recovery then it is very easy to install magisk manager.
just go on your twrp recovery mode
Select advanced and select install root.
Reboot your Phone .
See magisk manager install successfully.
Any help about mi cc9 magisk manager just coment here. I will be ready for replay just like you want.
.
Or Download this file and install through twrp recovery.
Latest stable magisk manager zip [flash file]
https://drive.google.com/file/d/1j6EWKPt1ZNzW7QgtILkgW5xphCzzcKNH/view?usp=drivesdk
Magisk manager apk
https://drive.google.com/file/d/1Hzvi5f2bZcUPyzWx-ETfqZanQjLCJHGq/view?usp=drivesdk
Lijlp0/02plppp000p7 lu6pppp?0lpl
Ul u?????//6000
I've installed magisk without twrp, just follow guide online. No need specific software because 7zip can extract boot.img easily from update file. After that install magisk manager app on phone, select install - patch own boot file, copy modified file to pc again, reboot into bootloader, flash modified boot.img and reboot.
eidrag said:
I've installed magisk without twrp, just follow guide online. No need specific software because 7zip can extract boot.img easily from update file. After that install magisk manager app on phone, select install - patch own boot file, copy modified file to pc again, reboot into bootloader, flash modified boot.img and reboot.
Click to expand...
Click to collapse
I need unlock BL to flash the modded boot.img?
RazrBR said:
I need unlock BL to flash the modded boot.img?
Click to expand...
Click to collapse
Yes, first unlock BL to be able to enter fastboot mode. Apply to unlock bootloader with Mi account, please follow guide on how to unlock the bootloader.
eidrag said:
I've installed magisk without twrp, just follow guide online. No need specific software because 7zip can extract boot.img easily from update file. After that install magisk manager app on phone, select install - patch own boot file, copy modified file to pc again, reboot into bootloader, flash modified boot.img and reboot.
Click to expand...
Click to collapse
Hi. Did you do these passages also on MIUI 12? Because I installed Magisk app, but it showed Ramdisk: no, and now I don't know if I should install it in recovery partition or not
there's twrp and orangefox that can be used for cc9 meitu/vela. Unlock bootloader, enable adb, flash custom recovery by fastboot. After that use custom recovery to install magisk. I'm sorry I don't use cc9 anymore since last weekend because miui12 notification and permission is too aggressive, have to restart app everytime so that can get contact info.
Hi!
This is a quick guide on how you can update your OP6 to latest Open Beta build from OnePlus with these changes:
Changelog
Added the notch area display options under Settings>Display>Notch display>Hide the notch area
Updated the GMS Package
Updated Android security patch to 2019.11
Improved system stability and general bug fixes
Sign up to get rewards, premium experience, and exclusive offers
- grabbed from OP community forum
If you are running stable 10.0.1 you can local upgrade to OB3 withoutno problem
But if you running open beta already you need to be in OB2 Q before updating to OB3 Q.
Here's the step by step guide:
Note: disable magisk modules and substratum first if ever you have. DON'T FORGET!!
1. Download OP6 OB3 firmware: https://otafsg1.h2os.com/patch/amaz...22_OTA_062_all_1912110952_cacdd5fe0385b33.zip
1-2. Download patched boot image: https://mega.nz/#!zBlXSQzC!RAQgiPqJXydFIXa-6sqntQiUOK34-QYdtot4wEu-mEQ
(Copy this to your PC you need this later)
1-3. Download Magisk Manager APK (if you don't have this installed yet.)
2. Update using local upgrade
3. Reboot
4. Allow it to boot up and wait few minutes to let finish the update completely.
5. Reboot to bootloader - fastboot
6. Type
fastboot flash boot_a "bootname".img
fastboot flash boot_b "bootname".img
(Without " ")
7. Type: fastboot reboot
- Install Magisk Manager APK, (if you don't have it)
8. Re enable your modules and everything then reboot one last time
9. Lastly, sit down and relax
Credits: @Siljorfag for OP6T stock boot image i asked. @Amirhussaini for OP6 stock boot image i asked
OP for OB3 Q update
From 10.0.1
download ob3 full
open magisk - uninstall - restore image
local update select ob3
dont reboot
open magisk
install - inactive slot
reboot
DONE
brmbjn said:
From 10.0.1
download ob3 full
open magisk - uninstall - restore image
local update select ob3
dont reboot
open magisk
install - inactive slot
reboot
DONE
Click to expand...
Click to collapse
That's totally different from what i did which i stated above. I used pc on my procedure which gives me no problem too. Steps may vary depending on user preference.
Can You please provide a guide to Update to OB3 Q with Magisik And TWRP as Well.
Currently my situation is i have bootloader unlocked and running on OB3 Q
When i try to install twrp and magisik i was getting stuck at Bootloader Unlocked screen.
Please help me to get Twrp and Magisik as welll
DroidPrince16 said:
Hi!
This is a quick guide on how you can update your OP6 to latest Open Beta build from OnePlus with these changes:
Changelog
Added the notch area display options under Settings>Display>Notch display>Hide the notch area
Updated the GMS Package
Updated Android security patch to 2019.11
Improved system stability and general bug fixes
Sign up to get rewards, premium experience, and exclusive offers
- grabbed from OP community forum
If you are running stable 10.0.1 you can local upgrade to OB3 withoutno problem
But if you running open beta already you need to be in OB2 Q before updating to OB3 Q.
Here's the step by step guide:
Note: disable magisk modules and substratum first if ever you have. DON'T FORGET!!
1. Download OP6 OB3 firmware: https://otafsg1.h2os.com/patch/amaz...22_OTA_062_all_1912110952_cacdd5fe0385b33.zip
1-2. Download patched boot image: https://mega.nz/#!zBlXSQzC!RAQgiPqJXydFIXa-6sqntQiUOK34-QYdtot4wEu-mEQ
(Copy this to your PC you need this later)
1-3. Download Magisk Manager APK (if you don't have this installed yet.)
2. Update using local upgrade
3. Reboot
4. Allow it to boot up and wait few minutes to let finish the update completely.
5. Reboot to bootloader - fastboot
6. Type
fastboot flash boot_a "bootname".img
fastboot flash boot_b "bootname".img
(Without " ")
7. Type: fastboot reboot
- Install Magisk Manager APK, (if you don't have it)
8. Re enable your modules and everything then reboot one last time
9. Lastly, sit down and relax
Credits: @Siljorfag for OP6T stock boot image i asked. @Amirhussaini for OP6 stock boot image i asked
OP for OB3 Q update
Click to expand...
Click to collapse
transfer quota exceeded .. anyone here willing to share the patched img from a different cloud .. thank you
brmbjn said:
From 10.0.1
download ob3 full
open magisk - uninstall - restore image
local update select ob3
dont reboot
open magisk
install - inactive slot
reboot
DONE
Click to expand...
Click to collapse
If you restored the image, how did you get to still have magisk?
ddaharu said:
If you restored the image, how did you get to still have magisk?
Click to expand...
Click to collapse
Restore image. Dont reboot and then select local update.....
brmbjn said:
Restore image. Dont reboot and then select local update.....
Click to expand...
Click to collapse
I'll give it a try.
Edited: I actually didn't have to restore images. I just needed to reinstall magisk in magisk before I rebooted and it worked.
I followed each step .. now i cant see install- inactive slot .. when i click on install it says to install latest apk which is already present
rohheat said:
I followed each step .. now i cant see install- inactive slot .. when i click on install it says to install latest apk which is already present
Click to expand...
Click to collapse
Magisk preinstalled. Just install latest magisk manager. No need to do anymore fancy
DroidPrince16 said:
Magisk preinstalled. Just install latest magisk manager. No need to do anymore fancy
Click to expand...
Click to collapse
I didn install latest magisk still same . I cant find
rohheat said:
I didn install latest magisk still same . I cant find
Click to expand...
Click to collapse
You can repeat clean install by updating again via local upgrade. Then do it again.
After updating my sim cards aren't detected. Also twrp is gone and I can't clear cache. Any advice?
Sent from my [device_name] using XDA-Developers Legacy app
Hi,
I finally got Palladium GSI installed (Android 11)! I rooted my Pixel in the past with Magisk 25.2. Now on my Samsung Galaxy A50 that I installed Palladium, I cannot get root. Here are the steps I did.
RAMDISK=NO in Magisk.
(1) Download Magisk 25.2
(2) extract recovery.img from TWRP 3.6 (that I installed originally)
(3) Open Magisk->Install with recovery mode checked ->NEXT -> select and patch a file -> pick recovery.img -> "let's go"
(4) copy the Magisk patched image to my SD Card
(5) boot into TWRP
(6) Install->Image-> pick the Magisk patched (recovery) image -> select 'recovery' partition -> 'swipe to confirm flash'
(7) reboot to recovery once flashed
(8) open Magisk app, no root
what did I do wrong?
I also tried installing Magisk in TWRP by renaming the extension to 'zip' and flashing, rebooting into recovery... I saw that as another method - didn't work either
I'm soo close trying the two methods above I saw in other XDA forum posts. Did I miss a critical step?
Installation
The Magic Mask for Android
topjohnwu.github.io
^ do I need to do the vbmeta steps too? Unsure how I would do that in TWRP though...
vbmeta is afaik patched from maigisk, but you can download vbmeta.img.empty pack it into tar archive and flash from Odin3 as it might still required for twrp in case magisk doesn't work.