Database Info

[Q] [NEEDS HELP] Creating ROM for Ace Plus

Hello.
Right now as I am typing this message, the source files for Cyanogenmod 11.0 are being synced to my computer, and I am trying to make a build for our device. I have a few questions though that would affect my development:
1) On a guide I was reading (http://forum.xda-developers.com/showthread.php?t=2060017), it says "MAKE SURE YOUR PHONE IS ON OFFICIAL LATEST CYANOGENMOD ROM". But trebon isn't officially supported. Would it still work if I put in trebon, or do I need to do other steps?
2) Do I have to code something after downloading the Android sources, or do I just have to build it instantly?
Any help on these would be greatly appreciated. I'm willing to create a ROM for our device if I can get the help I need, since I have nothing better to do anyway.
Thanks!

Liam D. said:
Hello.
Right now as I am typing this message, the source files for Cyanogenmod 11.0 are being synced to my computer, and I am trying to make a build for our device. I have a few questions though that would affect my development:
1) On a guide I was reading (http://forum.xda-developers.com/showthread.php?t=2060017), it says "MAKE SURE YOUR PHONE IS ON OFFICIAL LATEST CYANOGENMOD ROM". But trebon isn't officially supported. Would it still work if I put in trebon, or do I need to do other steps?
2) What's the minimum RAM requirement for Cyanogenmod? If OmniROM or AOKP is lighter, I would switch sources.
2) Do I have to code something after downloading the Android sources, or do I just have to build it instantly?
Any help on these would be greatly appreciated. I'm willing to create a ROM for our device if I can get the help I need, since I have nothing better to do anyway.
Thanks!
EDIT: After doing some research, I switched to AOKP instead of Cyanogenmod 11 because it is lighter. Apparently, according to the Cyanogenmod 11 Google+ post, they require a minimum of 512MB RAM, which our phone does not have. Syncing right now is AOKP source code. If some people would like to help me make a build, I would appreciate it if you would answer the questions above.
Click to expand...
Click to collapse
me :good:.. i want to help

Thanks, Androidoo.
To anyone who wonders, I got some help from @streambinder and right now I just finished downloading the Cyanogenmod 11 sources. I'll be whipping up a new build within the week and would love to have other users test it out for me (if I ever get to finish it). I've been using TheWhisp's sources for Cyanogenmod 11 for Galaxy Mini and when the ROM I built goes live, I'll be sure to upload it here and give him credits for his sources.

I need a little help here, possibly from @giugiu19 @smartandroidtech @streambinder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tried Googling for answers but I got no luck with this. Can you help me out with that?
Thanks!

I think you must refer this guide as it is much more detailed.
http://forum.xda-developers.com/chef-central/android/guide-android-rom-development-t2814763
If you have any question then you can ask the OP of that guide.

kk9999gada said:
I think you must refer this guide as it is much more detailed.
http://forum.xda-developers.com/chef-central/android/guide-android-rom-development-t2814763
If you have any question then you can ask the OP of that guide.
Click to expand...
Click to collapse
Thanks kk9999gada! I'll take a look at that.

Success! I've managed to make a build with no errors.
I'll be testing this now, and if all goes well, expect a release soon!

Liam D. said:
Success! I've managed to make a build with no errors.
I'll be testing this now, and if all goes well, expect a release soon!
Click to expand...
Click to collapse
grea work man excited:fingers-crossed:

Androidoo said:
grea work man excited:fingers-crossed:
Click to expand...
Click to collapse
Thanks!
Right now, everything works fine, except for WiFi. I'm still trying to figure it out, and it looks like I might have to change kernels.

Liam D. said:
Thanks!
Right now, everything works fine, except for WiFi. I'm still trying to figure it out, and it looks like I might have to change kernels.
Click to expand...
Click to collapse
which kernel u tried?

Androidoo said:
which kernel u tried?
Click to expand...
Click to collapse
I tried the SpeedMod kernel, the phone boots fine but WiFi doesn't work. I tried Triprex's kernel, and the phone would not respond at all.

Liam D. said:
I tried the SpeedMod kernel, the phone boots fine but WiFi doesn't work. I tried Triprex's kernel, and the phone would not respond at all.
Click to expand...
Click to collapse
kernel problem.. cn u try for logcat any devs cn help this may be or u trying somethig more>??

Androidoo said:
kernel problem.. cn u try for logcat any devs cn help this may be or u trying somethig more>??
Click to expand...
Click to collapse
It's finals week in the university, so I'm putting it on hold. On Friday I will resume development. I have a logcat ready here and I'm studying it to figure out the problem. I'm 99% sure this is a problem with the kernel, probably a broken module.
If anyone's interested, I have a working copy of the ROM, but WiFi and Camera doesn't work yet. If you want I can upload the ROM. I'm doing a project for school right now. After I finish (in about 1 more hour), I'll upload some screenshots of my ROM.

Here are the screenshots of the ROM I built:

Liam D. said:
Here are the screenshots of the ROM I built:
View attachment 2980442 View attachment 2980443
Click to expand...
Click to collapse
GREAT WORK BUDDY PLEASE START A THREAD its jus perfect with new theming engine
---------- Post added at 10:01 AM ---------- Previous post was at 09:59 AM ----------
Liam D. said:
It's finals week in the university, so I'm putting it on hold. On Friday I will resume development. I have a logcat ready here and I'm studying it to figure out the problem. I'm 99% sure this is a problem with the kernel, probably a broken module.
If anyone's interested, I have a working copy of the ROM, but WiFi and Camera doesn't work yet. If you want I can upload the ROM. I'm doing a project for school right now. After I finish (in about 1 more hour), I'll upload some screenshots of my ROM.
Click to expand...
Click to collapse
Start A thread and take as much time you need:fingers-crossed:

Thanks.
Uploading a build right now (the one where camera and WiFi doesn't work yet). I'm also downloading a new kernel build to my PC to experiment with (kernel 3.4.x from TheWhisp's jenad build).

[TWRP] Unofficial custom recovery for MT6580-based clones.

DISCLAIMER: I am not responsible if your device gets messed up royally, explodes or causes you to go nuts because you couldn't get this thing to work. I'm no expert coder either, but I am willing to fix things as much as I can.
I actually did this as there's practically no support whatsoever for that counterfeit phone of mine (yeah I know, you get what you pay for, but I bought this Galaxy S7 clone mostly for science). None of the existing porting tools work for the MT6580, and while manually porting an existing TWRP image to my phone works, it simply isn't cutting it as most of these recoveries are designed for a conventional framebuffer setup, not on devices with flipped LCDs. Fortunately there's this source tree for the Infinix Hot 2 TWRP port, and as the partition setup seems to be largely the same apart from differing capacities and the aforementioned LCD issue, this had to be done.
This should theoretically work on HDC S7 clones and a few others albeit with a few modifications, though I ported this from source with the Z6U030/GXQ6580 in mind. I know the latter isn't as widely known as the HDC model, let alone the original, but oh well...
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOADS:
You may download the initial recovery release here: https://github.com/huckleberrypie/android_device_alps_z6u030_twrp/releases
The recovery should work best on this ROM, but may also work on other devices provided you replaced the kernel with the one that came with your device:
http://www.4shared.com/rar/6mMhYIk5ce/Galaxy_S7_mt6580_Z6U030HA_V105.html
And as for the sources, you can download the device tree here: https://github.com/huckleberrypie/android_device_alps_z6u030_twrp
Credits
My biggest props to the TeamWin team for making this little project of mine possible, as they're basically the ones who made this in the first place; I merely forked it to account for my device's configuration anyway. I'd also like to thank my pals over at American Girl Adult Collectors especially Amy and Molly, Arnee Libelo and Arturo of Driving Passion, and my buds Andy Vandjick and HardcoreHacker for the fun and expertise they shared.

plz rom
MT6580_alps_gxq6580_weg_l_Android5.1_Z6U030HA_V107En
---------- Post added at 02:23 PM ---------- Previous post was at 02:01 PM ----------
How to install twrp

Here are the /lib and /usr files that you requested.

hi. did USB Storage is working on yours? I tried to port another version of this recovery(Jemmeni's port) and seems to work fine except for error in mounting USB Storage. I need to work on that.

Yup, everything works apart from the lack of USB-OTG.

maybe i'll try your copy. maybe it work. and also, after screen time out, the screen was turned on again. how to fix that? i removed otg from mount points. that is the only solution if your kernel didn't support otg

Not sure what to do with the screen issue tbh; I just wanted a recovery for this rather obscure knockoff I use. Feel free to post your fork when you're done with it, aight?

i cant download the file at dev-host and it prompts as dangerous website warning instead. please upload to another file hosting site or attach here instead.

PAPalinskie said:
i cant download the file at dev-host and it prompts as dangerous website warning instead. please upload to another file hosting site or attach here instead.
Click to expand...
Click to collapse
I posted it on my Github page - there are two releases, one for v105 and another for v106.

blakegriplingph said:
I posted it on my Github page - there are two releases, one for v105 and another for v106.
Click to expand...
Click to collapse
thanks brother.

PAPalinskie said:
thanks brother.
Click to expand...
Click to collapse
No problem mate.

custom recovery mt6580
Hey will it work on my swipe konnect plus mt6580

aksthecount said:
Hey will it work on my swipe konnect plus mt6580
Click to expand...
Click to collapse
If your device has a similar partition scheme, just change the kernel and a few other settings, and it should work.

i just test it on a g930f with a mt-6580 processor and it doesn't work

need twrp scatter file
MT6580__samsung__A9__A9__5.1__Z8054_5.1_V2.9_20161017-193505. .twrp scatter file for this . .thanks

Bro I have a Yezz 5E3 with Chipset Mediatek MT6580M, can this work in it?

PieNs7 said:
Bro I have a Yezz 5E3 with Chipset Mediatek MT6580M, can this work in it?
Click to expand...
Click to collapse
Try extracting the stock recovery off your phone, then open it using Carliv's IMG Kitchen. Then see if you could add the mount points from your phone to the recovery I compiled. Beware though, the recovery I made is for a flipped LCD so I am not sure if it will work without removing the flipped LCD flag and recompiling TWRP from source.

hi
i have an archos 101 3g platinum with mt6580 (android nougat)
any chance to succeed to install twrp on it ? i already have a samsung a5 and an asus zenphone 2 rooted with twrp installed
adb shell is working and i have access to bootloader mode
and fastboot is working too, i only need a valid twrp.img
ty

phoenixpb said:
hi
i have an archos 101 3g platinum with mt6580 (android nougat)
any chance to succeed to install twrp on it ? i already have a samsung a5 and an asus zenphone 2 rooted with twrp installed
adb shell is working and i have access to bootloader mode
and fastboot is working too, i only need a valid twrp.img
ty
Click to expand...
Click to collapse
I don't have access to a build environment atm, so I am not sure if I could do a TWRP source port for you. :/

blakegriplingph said:
I don't have access to a build environment atm, so I am not sure if I could do a TWRP source port for you. :/
Click to expand...
Click to collapse
well thanks for your reply anyway
i continue digging

TWRP 3.2.1 with working decryption

The old TWRP 3.1.1 image made by @eagleeyetom no longer works after I upgraded to Oreo. So I put in sometime and figured out how to fix that myself. Turns out it's easier than I thought!
Note I have only tested this with OmniRom 8.1, YMMV with a different android version.
Thanks the mods for moving this thread here.
DOWNLOAD
Update: Fixed some missing utilities (e.g. unzip). The default configuration file is the worst!

nialv7 said:
The old TWRP 3.1.1 image made by @eagleeyetom no longer works after I upgraded to Oreo. So I put in sometime and figured out how to fix that myself. Turns out it's easier than I thought!
Note I have only tested this with Oreo, YMMV with a different android version.
I have to post here because I "must have a higher post count in order to make a new thread in this development section". So maybe a mod can move it there?
DOWNLOAD
Click to expand...
Click to collapse
What did you do? I'm very curious since I couldn't find a way to fix it.

@eagleeyetom I just makr twrp run qseecomd before decryption.

nialv7 said:
@eagleeyetom I just makr twrp run qseecomd before decryption.
Click to expand...
Click to collapse
I tried that. How did you build it? Do you have a source that you could share?

Decryption doesn't work for me on 7.1.1 - 34.3.A.0.252

@Wxfdswxc If you are using Android 7, try this twrp: https://forum.xda-developers.com/x-compact/development/recovery-twrp-3-1-1-xperia-x-compact-t3640914

nialv7 said:
@Wxfdswxc If you are using Android 7, try this twrp: https://forum.xda-developers.com/x-compact/development/recovery-twrp-3-1-1-xperia-x-compact-t3640914
Click to expand...
Click to collapse
Yes I know, I tried it to be ready for Oreo, I already switched back to 3.1.1.
It was just to pass the info.

@eagleeyetom Here are some patches

nialv7 said:
@eagleeyetom Here are some patches
Click to expand...
Click to collapse
which twrp branch did you use to build the recovery image? omni's android-8.1 or android-7.1?

@oshmoun 8.1

nialv7 said:
@oshmoun 8.1
Click to expand...
Click to collapse
interesting, so just to make sure, you used this repository and branch?
https://github.com/omnirom/android_bootable_recovery
because I tried that, and couldn't get it to boot
will test with your patch

@oshmoun First time I tried it, it didn't work either. It boots, but it can't show anything on the screen. The screen will show the Sony logo. But if I touch the screen, the phone will vibrate.
Later I found a solution here: https://forum.xda-developers.com/showpost.php?p=65220099&postcount=398

Thanks a lot! And well done.
Will verify and report back when my region gets released.

nialv7 said:
@oshmoun First time I tried it, it didn't work either. It boots, but it can't show anything on the screen. The screen will show the Sony logo. But if I touch the screen, the phone will vibrate.
Later I found a solution here: https://forum.xda-developers.com/showpost.php?p=65220099&postcount=398
Click to expand...
Click to collapse
Can't seem to build twrp with your patch
Did you do anything regarding busybox and toybox?
EDIT: switched from toybox to busybox, twrp boots fine! thanks for the hints!

Unfortunately does not work for me, stock Sony Oreo Firmware.
It will boot, but decryption fails at all

bthek said:
Unfortunately does not work for me, stock Sony Oreo Firmware.
It will boot, but decryption fails at all
Click to expand...
Click to collapse
Same here.

MTP not working
MTP doesn't work

Please, post a tutorial about how to build it. It will be easier for all

Wxfdswxc said:
Same here.
Click to expand...
Click to collapse
bthek said:
Unfortunately does not work for me, stock Sony Oreo Firmware.
It will boot, but decryption fails at all
Click to expand...
Click to collapse
nialv7 said:
The old TWRP 3.1.1 image made by @eagleeyetom no longer works after I upgraded to Oreo. So I put in sometime and figured out how to fix that myself. Turns out it's easier than I thought!
Note I have only tested this with OmniRom 8.1, YMMV with a different android version.
Thanks the mods for moving this thread here.
DOWNLOAD
Update: Fixed some missing utilities (e.g. unzip). The default configuration file is the worst!
Click to expand...
Click to collapse
Maybe need to change the thread title, or maybe someone can explain how to make it work...

X compact oreo PRFCreator
what is the problem. ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can't get root management with Andi's addonsu-13.0-arm, common TWRP, and 20180611 ROM

I have used the versions provided by Andi in this thread: https://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/rom-cyanogenmod-13-cm13-0-t3303798
The device is Tab 2 10.1 / GT-P5100 / espresso3g and I have used the common TWRP 3.2.2-0 provided by Andi from here: https://androidfilehost.com/?w=files&flid=48848&sort_by=date&sort_dir=DESC
The addonsu (su (arm)) used is the one under LineageOS 13.0 here: https://andi34.github.io/roms_tab2_lineage.html
ROM version is lineage-13.0_espresso3g-6.0.1-20180611-0149.zip from here: https://androidfilehost.com/?w=files&flid=143638&sort_by=date&sort_dir=DESC
To install both ROM and su I used sideload with TWRP 3.2.2-0 and terminal in linux:
Code:
sudo adb sideload lineage-13.0_espresso3g-6.0.1-20180611-0149.zip
and then right after BEFORE rebooting doing:
Code:
sudo adb sideload addonsu-13.0-arm.zip
Could someone please help me out?
Thanks,
Hekja

@Android-Andi

You also need a userdebug boot.img which contains needed selinux rules for the addonsu. Not sure if I uploaded it somewhere, user haven't followed the rules and that's why the thread was closed and maybe the boot.img never shared.

Android-Andi said:
You also need a userdebug boot.img which contains needed selinux rules for the addonsu. Not sure if I uploaded it somewhere, user haven't followed the rules and that's why the thread was closed and maybe the boot.img never shared.
Click to expand...
Click to collapse
Thank you very much for your reply Andi.
I have added the addonsu when sideloading ROM's with S3, S4, and S4 mini with no need adding anything else to make root management work. Could you please explain why it is different with the espresso3g?
Thanks,
Hekja

Hekja said:
Thank you very much for your reply Andi.
I have added the addonsu when sideloading ROM's with S3, S4, and S4 mini with no need adding anything else to make root management work. Could you please explain why it is different with the espresso3g?
Thanks,
Hekja
Click to expand...
Click to collapse
user vs userdebug security has high priority and since there's no negative side affect I've abandoned userdebug builds.
If I find time I can send you a userdebug bootimage, maybe remind me end of next week if you haven't heard from me

Android-Andi said:
user vs userdebug security has high priority and since there's no negative side affect I've abandoned userdebug builds.
If I find time I can send you a userdebug bootimage, maybe remind me end of next week if you haven't heard from me
Click to expand...
Click to collapse
Ahh, I see
And thank you very much. Appreciate it a lot :good:

Hekja said:
Ahh, I see
And thank you very much. Appreciate it a lot :good:
Click to expand...
Click to collapse
I've not forgotten it, need some more days

Android-Andi said:
I've not forgotten it, need some more days
Click to expand...
Click to collapse
That's okay Andi. Thanks for caring :good:

Just want to notify that I have installed the 14.1 ROM instead.
The file is lineage-14.1_espresso3g-7.1.2-20180131-1859.zip which I downloaded from here: https://androidfilehost.com/?w=files&flid=209384&sort_by=date&sort_dir=DESC
When sideloading the addonsu-14.1-arm-signed.zip from: https://download.lineageos.org/extras I got access to root management.
After trying out the 13.0 ROM my experience was that it was not as responsive and stable as I hoped for. So I tried out the 14.1 and it seems like it is both more stable and responsive. Experience until now very good actually. So with the root management activated too I am going to stay with the 14.1 ROM.
Still using the common TWRP v. 3.2.2-0 provided by you Andi. https://androidfilehost.com/?w=files&flid=48848&sort_by=date&sort_dir=DESC
Thanks

Hekja said:
That's okay Andi. Thanks for caring :good:
Click to expand...
Click to collapse
I've a new build ready and also made flashable kernel zips with usersebug kernel for those who like to use lineage Su add-on on latest build. Will be up later today.

Attached userdebug kernel for yesterdays build (will be up later today, still uploading) for those who like to use the LineageOS Su Addon.
Can't say if the kernel works on older builds
Build contains October ASB patches
Hope everyone enjoyed the christmas days! Have a good start everyone into a healthy year 2019!!!

Android-Andi said:
Attached userdebug kernel for yesterdays build (will be up later today, still uploading) for those who like to use the LineageOS Su Addon.
Can't say if the kernel works on older builds
Build contains October ASB patches
Hope everyone enjoyed the christmas days! Have a good start everyone into a healthy year 2019!!![/QUOTE
Hey i need some help, can you tell me your telegram @ ?
Click to expand...
Click to collapse

bipindr123 said:
Hey i need some help, can you tell me your telegram @ ?
Click to expand...
Click to collapse
Who said I use telegram?
Also this wouldn't be what a forum is for...

Android-Andi said:
Who said I use telegram?
Also this wouldn't be what a forum is for...
Click to expand...
Click to collapse
The doubts and questions I have are a lot and are gonna be spam for this forum, You have disabled private messages on xda, give me some other option to contact you like hangouts

bipindr123 said:
The doubts and questions I have are a lot and are gonna be spam for this forum, You have disabled private messages on xda, give me some other option to contact you like hangouts
Click to expand...
Click to collapse
Not going to share private contact information here. If you have any development related questions ask them here https://forum.xda-developers.com/showthread.php?t=2137606 and I'll maybe answer when I have time for it. I've stepped back from Android and not being much around here.
Enough OT here I guess.

Android-Andi said:
Not going to share private contact information here. If you have any development related questions ask them here https://forum.xda-developers.com/showthread.php?t=2137606 and I'll maybe answer when I have time for it. I've stepped back from Android and not being much around here.
Enough OT here I guess.
Click to expand...
Click to collapse
Okay thanks, last question
can you enable xda messages for me?

Hope to find a solution.. I have the same problem in lineage 14. Twrp, it works, flashed lineage 14 gapps and addon su zip included in lineage download. I have no root permission ?7.1 works so fast and fine, however

marco.poto said:
Hope to find a solution.. I have the same problem in lineage 14. Twrp, it works, flashed lineage 14 gapps and addon su zip included in lineage download. I have no root permission [emoji17]7.1 works so fast and fine, however
Click to expand...
Click to collapse
Download and use the userdebug kernel for the build you're using.

Example:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks so much for your reply. May I ask a link? And to be honest, what a debug do?
By the way, your 14 it is so far the best mod for p5100

Help On Porting Roms

Hello Everyone, I am new to porting custom ROMs and I would like to start to Port custom ROMs for this device, could anyone help me get started?

MaybeDontAsk said:
Hello Everyone, I am new to porting custom ROMs and I would like to start to Port custom ROMs for this device, could anyone help me get started?
Click to expand...
Click to collapse
Try building lineage first. https://wiki.lineageos.org/devices/kebab/build

Thanks for telling me what to start with, I was successful on everything until the "Brunch Kebab" command on that one I got the following Vendor Error I believe it is - hope you can help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

MaybeDontAsk said:
Thanks for telling me what to start with, I was successful on everything until the "Brunch Kebab" command on that one I got the following Vendor Error I believe it is - hope you can help meView attachment 5541455
Click to expand...
Click to collapse
You used this for the vendor files, https://github.com/TheMuppets/proprietary_vendor_oneplus right?

Nope I didn't even know I needed that, thanks I'll try this tomorrow, if I need to extract this, do I extract it to the vendor folder?

MaybeDontAsk said:
Nope I didn't even know I needed that, thanks I'll try this tomorrow, if I need to extract this, do I extract it to the vendor folder?
Click to expand...
Click to collapse
Yeah, just (in the source location):
Code:
cd vendor/
git clone https://github.com/TheMuppets/proprietary_vendor_oneplus.git -b lineage-18.1 oneplus
Then you should be good to go.
Make sure these exist too:
kernel/oneplus/sm8250
hardware/oneplus

Alright if I success building lineage tomorrow, should I try to port another custom ROM? And if yes do I need to download any other files other than the source cuz I believe everything is pre installed for the OnePlus 8t on the lineage os 8T build guide.

MaybeDontAsk said:
Alright if I success building lineage tomorrow, should I try to port another custom ROM? And if yes do I need to download any other files other than the source cuz I believe everything is pre installed for the OnePlus 8t on the lineage os 8T build guide.
Click to expand...
Click to collapse
Yes of course you can try building other ROMs. Lineage is already built for the 8T, but is a good place to start. You will need to download the source of each ROM you want to build. However, Lineage has all of the needed files to be downloaded for the 8T. For other ROMs, you will need to edit some files in the device trees and possibly make your own.

Do u know if there's a guide or examples to editing files like that or making my own?

MaybeDontAsk said:
Do u know if there's a guide or examples to editing files like that or making my own?
Click to expand...
Click to collapse
Hmm, this guide may help - https://blog.arrowos.net/compilation-guide/
But also, this telegram group can be helpful to start - https://t.me/AndroidBuildingHelp

Hi thanks, so I was ready (Kinda) to start building DotOS 6.0 (Android 12) For This Device (OnePlus 8T) right after finishing the lineage build but I got the following error after one hour -
Sorry for the bad quality, rn I have the project 404 rom on my phone that came with no camera so had to get gcam ported apk to take this picture.

MaybeDontAsk said:
Hi thanks, so I was ready (Kinda) to start building DotOS 6.0 (Android 12) For This Device (OnePlus 8T) right after finishing the lineage build but I got the following error after one hour -View attachment 5542333
Sorry for the bad quality, rn I have the project 404 rom on my phone that came with no camera so had to get gcam ported apk to take this picture.
Click to expand...
Click to collapse
That looks like youre building lineage still right? Also, A12 will be a little more difficult to build and may need a more extensive guide..
And more code is needed to figure out the error

Hi, I want to build KangOS from source, I know all basic commands to sync repo and all of that but I don't know how to buil/port/make it for this device (Oneplus8T) any guide on if I need stock filmware or edit any files?

Hello, after a long time, I have decided to try porting a rom again, I am trying to port an Android 12L rom, but I've come upon an error when I am about to compile the rom
Code:
"Brunch Kebab"
and I get "No config file found for Target Device Kebab (I have already cloned vendor, device tree and kernel files for 12L) I have been trying to fix this error for around an hour or 2 now. I would appreciate if you helped me

MaybeDontAsk said:
Hello, after a long time, I have decided to try porting a rom again, I am trying to port an Android 12L rom, but I've come upon an error when I am about to compile the rom
Code:
"Brunch Kebab"
and I get "No config file found for Target Device Kebab (I have already cloned vendor, device tree and kernel files for 12L) I have been trying to fix this error for around an hour or 2 now. I would appreciate if you helped me
Click to expand...
Click to collapse