DISCLAIMER: I am not responsible if your device gets messed up royally, explodes or causes you to go nuts because you couldn't get this thing to work. I'm no expert coder either, but I am willing to fix things as much as I can.
I actually did this as there's practically no support whatsoever for that counterfeit phone of mine (yeah I know, you get what you pay for, but I bought this Galaxy S7 clone mostly for science). None of the existing porting tools work for the MT6580, and while manually porting an existing TWRP image to my phone works, it simply isn't cutting it as most of these recoveries are designed for a conventional framebuffer setup, not on devices with flipped LCDs. Fortunately there's this source tree for the Infinix Hot 2 TWRP port, and as the partition setup seems to be largely the same apart from differing capacities and the aforementioned LCD issue, this had to be done.
This should theoretically work on HDC S7 clones and a few others albeit with a few modifications, though I ported this from source with the Z6U030/GXQ6580 in mind. I know the latter isn't as widely known as the HDC model, let alone the original, but oh well...
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOADS:
You may download the initial recovery release here: https://github.com/huckleberrypie/android_device_alps_z6u030_twrp/releases
The recovery should work best on this ROM, but may also work on other devices provided you replaced the kernel with the one that came with your device:
http://www.4shared.com/rar/6mMhYIk5ce/Galaxy_S7_mt6580_Z6U030HA_V105.html
And as for the sources, you can download the device tree here: https://github.com/huckleberrypie/android_device_alps_z6u030_twrp
Credits
My biggest props to the TeamWin team for making this little project of mine possible, as they're basically the ones who made this in the first place; I merely forked it to account for my device's configuration anyway. I'd also like to thank my pals over at American Girl Adult Collectors especially Amy and Molly, Arnee Libelo and Arturo of Driving Passion, and my buds Andy Vandjick and HardcoreHacker for the fun and expertise they shared.
plz rom
MT6580_alps_gxq6580_weg_l_Android5.1_Z6U030HA_V107En
---------- Post added at 02:23 PM ---------- Previous post was at 02:01 PM ----------
How to install twrp
Here are the /lib and /usr files that you requested.
hi. did USB Storage is working on yours? I tried to port another version of this recovery(Jemmeni's port) and seems to work fine except for error in mounting USB Storage. I need to work on that.
Yup, everything works apart from the lack of USB-OTG.
maybe i'll try your copy. maybe it work. and also, after screen time out, the screen was turned on again. how to fix that? i removed otg from mount points. that is the only solution if your kernel didn't support otg
Not sure what to do with the screen issue tbh; I just wanted a recovery for this rather obscure knockoff I use. Feel free to post your fork when you're done with it, aight?
i cant download the file at dev-host and it prompts as dangerous website warning instead. please upload to another file hosting site or attach here instead.
PAPalinskie said:
i cant download the file at dev-host and it prompts as dangerous website warning instead. please upload to another file hosting site or attach here instead.
Click to expand...
Click to collapse
I posted it on my Github page - there are two releases, one for v105 and another for v106.
blakegriplingph said:
I posted it on my Github page - there are two releases, one for v105 and another for v106.
Click to expand...
Click to collapse
thanks brother.
PAPalinskie said:
thanks brother.
Click to expand...
Click to collapse
No problem mate.
custom recovery mt6580
Hey will it work on my swipe konnect plus mt6580
aksthecount said:
Hey will it work on my swipe konnect plus mt6580
Click to expand...
Click to collapse
If your device has a similar partition scheme, just change the kernel and a few other settings, and it should work.
i just test it on a g930f with a mt-6580 processor and it doesn't work
need twrp scatter file
MT6580__samsung__A9__A9__5.1__Z8054_5.1_V2.9_20161017-193505. .twrp scatter file for this . .thanks
Bro I have a Yezz 5E3 with Chipset Mediatek MT6580M, can this work in it?
PieNs7 said:
Bro I have a Yezz 5E3 with Chipset Mediatek MT6580M, can this work in it?
Click to expand...
Click to collapse
Try extracting the stock recovery off your phone, then open it using Carliv's IMG Kitchen. Then see if you could add the mount points from your phone to the recovery I compiled. Beware though, the recovery I made is for a flipped LCD so I am not sure if it will work without removing the flipped LCD flag and recompiling TWRP from source.
hi
i have an archos 101 3g platinum with mt6580 (android nougat)
any chance to succeed to install twrp on it ? i already have a samsung a5 and an asus zenphone 2 rooted with twrp installed
adb shell is working and i have access to bootloader mode
and fastboot is working too, i only need a valid twrp.img
ty
phoenixpb said:
hi
i have an archos 101 3g platinum with mt6580 (android nougat)
any chance to succeed to install twrp on it ? i already have a samsung a5 and an asus zenphone 2 rooted with twrp installed
adb shell is working and i have access to bootloader mode
and fastboot is working too, i only need a valid twrp.img
ty
Click to expand...
Click to collapse
I don't have access to a build environment atm, so I am not sure if I could do a TWRP source port for you. :/
blakegriplingph said:
I don't have access to a build environment atm, so I am not sure if I could do a TWRP source port for you. :/
Click to expand...
Click to collapse
well thanks for your reply anyway
i continue digging
Related
Disclaimer :
It is your decision to install our software on your device. We take no responsibility for any damage that may occur from installing or using TWRP.
The TWRP Installer App
Will Make Your Life Easier
Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How Does It Work ?
This app is a simple bridge between Device And Server . It uses JSON (JavaScript Object Notation ) Parsing to parse data from server and compare it with data on the device . That is what makes it simple and fast . Then after downloading the recovery image , it gives you 2 choices either to flash image directly or store it so you can flash it later using the app . Some features will be added to the app like managing backups , flashing roms , wiping data ......
Feature's :
Download Recovery
Install Directly After Download Or Install It Later
Check Latest TWRP To Install And Give You The Latest Recovery And The Recovery Installed On Your Device
And More Features To Come
ChangeLog :
1 .Updated UI
2.Fixed 1 Root Malfunction .
Downloads :
TWRPInstaller-Alpha-0.0.2.apk
TWRPInstaller-Alpha-0.0.1.apk
XDA:DevDB Information
TWRP App Installer . , a App for the No Device
Contributors
S.a.M.e.R_d, Dees_Troy , helicopter88, bigbiff
Version Information
Status: Alpha
Created 2014-02-05
Last Updated 2014-02-06
Reserved
Q & A
Q : I opened the app and it gave me a dialog saying That device is not supported
A : For some devices you need to install recovery manually as they might defer in boot loaders ....
Q : I installed recovery but my installed recovery version is still the same !
A : The app parses your last recovery log , so you need to reboot to recovery so the change's can take effect .
KingCobra Is Online
resrvado
Nice one samer!
Cheers!
TheRinseM said:
Nice one samer!
Cheers!
Click to expand...
Click to collapse
Yep and after our lessons youll be able to do such apps to lol
Any one tested guys ?
Sent from my GT-I9500 using XDA Premium 4 mobile app
Working fine for me !!
TomorrowLand_Ace said:
Working fine for me !!
Click to expand...
Click to collapse
Nice now adding flash a zip feature
Is it works on MediaTek devices, ie: MT6589?
Hi Guys
Can someone tell is samsung s4 mini will be supported in future?
I very love TWRP but didnt find in device list :crying:
Thanks!
I'll play around with it on my devices across the weekend.
mamatkool said:
Is it works on MediaTek devices, ie: MT6589?
Click to expand...
Click to collapse
No as i do not think there is support for them
denon480 said:
Hi Guys
Can someone tell is samsung s4 mini will be supported in future?
I very love TWRP but didnt find in device list :crying:
Click to expand...
Click to collapse
you can try it , as TWRP supports many many devices , i can not know if there is support or no , if there is you will be guided with the app till the end , if there is no support you will see a dialog saying that there is no support
S.a.M.e.R_d said:
you can try it , as TWRP supports many many devices , i can not know if there is support or no , if there is you will be guided with the app till the end , if there is no support you will see a dialog saying that there is no support
Click to expand...
Click to collapse
I try it already, that why i ask about support in future (maybe you know?), our device is popular and i hope developers make TWRP for s4mini
denon480 said:
I try it already, that why i ask about support in future (maybe you know?), our device is popular and i hope developers make TWRP for s4mini
Click to expand...
Click to collapse
The s4 mini which arco is working on ? I can do that when I get home. I'll pm you a test build.
Unjustified Dev said:
The s4 mini which arco is working on ? I can do that when I get home. I'll pm you a test build.
Click to expand...
Click to collapse
Ohhhh rly??? Is will be very very very great:fingers-crossed:, yes that which arco68 working , buy the way i test this build http://forum.xda-developers.com/showthread.php?t=2589011 and it works, but cm 10.2 not install (error status 7) and when i did wipe data all media files was delete in system/media
Sorry for my english iam from Ukraine
Does it work with HTC ONE (M7UL) yet?
SecUpwN said:
Does it work with HTC ONE (M7UL) yet?
Click to expand...
Click to collapse
yes it wroks
Great, simple and useful= perfect
I just finished installing this on my N5 and N7 2013. It worked perfectly. I was running TWRP 2.6.0 on both devices and the app recognized that and told me there was an updated version available. I ticked install, it downloaded the new version, I ticked install now, it then gave me the option to reboot to recovery so I ticked yes and it rebooted to TWRP now showing 2.6.3. This worked perfectly on both devices. Thanks for the great work it is truly appreciated.
Rooting Guide For UMI MAX
install twrp Recovery and Root umi max,
Instructions-
twrp Installation-
Download sp tools, twrp, supersu, vcom Driver from Below
[*]install correct vcom Driver on PC
[*]Run Sp Flash Tools, Load MT67XXScatter from Recovery Folder
[*]Uncheck Everything and then Check Recovery only
[*]under Recovery Section Load Downloaded twrp 3.0xx.img
[*]then click on Download
[*]as soon as connect your Switched of phone to your pc via usb and wait for success, after complete, follow Below Instructions To Root,
Rooting Instructions-
Flash latest Supersu.zip via Recovery
Custom Rom- Coming Soon.....
Downloads-
mod edit - links removed
Credit-[/COLOR][/I][/B]
jemmini
[*]xn Logos/Me
Screen Shorts-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
custom rom?
any custom rom for umi max?
Pls can sme 1 help me wt the extracted .rar scatter file from the v7.01 20170329_c239v55_kw_u11.rar i wanna use in flashing twrp ...thanks
Hi, can anyone give me detailed partitions infos? I'm working on porting LineageOS but I don't own the device
UMI MAX
joe2k01 said:
Hi, can anyone give me detailed partitions infos? I'm working on porting LineageOS but I don't own the device
Click to expand...
Click to collapse
Tell me where I can find it.
I have UMI MAX and would be very happy to help. I can also be a tester.
shidrix said:
Tell me where I can find it.
I have UMI MAX and would be very happy to help. I can also be a tester.
Click to expand...
Click to collapse
Sorry but this device isn't really followed by the community, and I'm not going to build for only one person
joe2k01 said:
Sorry but this device isn't really followed by the community, and I'm not going to build for only one person
Click to expand...
Click to collapse
On many other sites there are many people who are looking for custom roms for UMI MAX, and not everyone writes about it. When it comes to UMI MAX it only saves it custom rom, the phone is jammed, does not work many functions, the battery has 4000mAh and can not withstand 1 day.I do not know how much time takes porting roms, but I would be very grateful if you did it.
shidrix said:
On many other sites there are many people who are looking for custom roms for UMI MAX, and not everyone writes about it. When it comes to UMI MAX it only saves it custom rom, the phone is jammed, does not work many functions, the battery has 4000mAh and can not withstand 1 day.I do not know how much time takes porting roms, but I would be very grateful if you did it.
Click to expand...
Click to collapse
Can you give me link of other sites?
joe2k01 said:
Can you give me link of other sites?
Click to expand...
Click to collapse
http://community.umidigi.com/thread-7188-1-1.html
https://forum.xda-developers.com/android/help/custom-rom-port-umi-max-t3615645
Please, two links on fast. Under the videos on YT there are also a lot of inquiries for any custom rom
Hi, I installed on my UMI MAX port Eragorn 4.8 available on UMI SUPER. I just changed boot.img from the official rom. From what I can see, everything works great except a fingerprint reader.
Thotem said:
Hi, I installed on my UMI MAX port Eragorn 4.8 available on UMI SUPER. I just changed boot.img from the official rom. From what I can see, everything works great except a fingerprint reader.
Click to expand...
Click to collapse
Can You give a link?
Thotem said:
Hi, I installed on my UMI MAX port Eragorn 4.8 available on UMI SUPER. I just changed boot.img from the official rom. From what I can see, everything works great except a fingerprint reader.
Click to expand...
Click to collapse
Hi. Could you please explain exactly what you did? Thanks.
tr3vkam said:
Hi. Could you please explain exactly what you did? Thanks.
Click to expand...
Click to collapse
I took the original boot.img file from the official UMI MAX Android 6 rom and changed it to that which was in Eragorn 4.8 rom for UMI SUPER by silent27.
To install this rom your phone must work on Android 6.
Thotem said:
I took the original boot.img file from the official UMI MAX Android 6 rom and changed it to that which was in Eragorn 4.8 rom for UMI SUPER by silent27.
To install this rom your phone must work on Android 6.
Click to expand...
Click to collapse
Thanks very much for replying! You have been much more helpful than anyone else so far
Hello I am not all that experienced and couldn't find an answer anywhere else when downloading the android 6 rom it comes as a rare file which isn't flashable and when extracting it and compressing it to a zip I get an error so how exactly do I make this flashable
PLZ help
Hello, i have the same problem with my phone but i also can't flash the twrp so i can't root the phone, i tried multiple official rom but when i flash the recovery with spft i get two result: 1) when i push the power button+volume up i get the error "no command" 2) when i push the power button+volume up the phone seems to skip the recovery and after a while it reboot in the normal system.. please someone tell me how to solve it, is it a problem of my IMIE? Thanks in advance
joe2k01 said:
Can you give me link of other sites?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=764170&st=1120
I have in my hands brand new un-rooted Umi A1 Pro with a full backup with cstool. anybody that would like to help I can make experiments rooting this device, i have no problem experimenting on it.
Thanks in Advance.
Makiu said:
I have in my hands brand new un-rooted Umi A1 Pro with a full backup with cstool. anybody that would like to help I can make experiments rooting this device, i have no problem experimenting on it. Thanks in Advance.
Click to expand...
Click to collapse
I don't have this device but, you may find the following thread helpful for what you are looking for. Don't be afraid to ask for some member guidance within it too.
https://forum.xda-developers.com/showthread.php?t=3385733
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Just received this device and also want root.
I read on website umigidi :
You can root this phone with Magisk Manager using the boot.img file available in the ROM packages. Use the boot.img from the same ROM version that you've installed on your phone.
Root and custom recoveries are never officially supported.
Ibuprophen said:
I don't have this device but, you may find the following thread helpful for what you are looking for. Don't be afraid to ask for some member guidance within it too.
https://forum.xda-developers.com/showthread.php?t=3385733
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Thank you very much! I'll try with Magisk Manager.
I successfully rooted my devide on 1 June firmware rom with magisk manager!
Makiu said:
I successfully rooted my devide on 1 June firmware rom with magisk manager!
Click to expand...
Click to collapse
I'm happy to see that you had gotten it figured out!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
TWRP for this device? is it much tu ask. I would appreciate and upload if needed the recovery .img if anyone knows how to patch it.
Makiu said:
TWRP for this device? is it much tu ask. I would appreciate and upload if needed the recovery .img if anyone knows how to patch it.
Click to expand...
Click to collapse
I have it. I requested it through twrp_builder. Got it a few hours later. Made from the 20180601 umidigi rom.
I have it installed, through their app. Flashing through sp_flash works too.
https://basketbuild.com/uploads/devs/yshalsager/TwrpBuilder/umidigi/a1_pro/TWRP-3.2.1-a1_pro-20180612.img
Benjamin
TWRP works but even formatting data partition, it encrypts data after the reboot. I think a modded boot.img is needed with encryption disabled.
Really thanks, too.
BenjaminX2 said:
I have it. I requested it through twrp_builder. Got it a few hours later. Made from the 20180601 umidigi rom.
I have it installed, through their app. Flashing through sp_flash works too.
https://basketbuild.com/uploads/devs/yshalsager/TwrpBuilder/umidigi/a1_pro/TWRP-3.2.1-a1_pro-20180612.img
Benjamin
Click to expand...
Click to collapse
How did you install the TWRP?
when I do, it doesn't stay permanent, I can only access the TWRP at the first boot of the phone, and the root flashing seems correct but it doesn't apply, when I reboot the terminal is not rooted and the TWRP is no longer there available, it has return to the original bootloader.
¿?
BenjaminX2 said:
I have it. I requested it through twrp_builder. Got it a few hours later. Made from the 20180601 umidigi rom.
I have it installed, through their app. Flashing through sp_flash works too.
https://basketbuild.com/uploads/devs/yshalsager/TwrpBuilder/umidigi/a1_pro/TWRP-3.2.1-a1_pro-20180612.img
Benjamin
Click to expand...
Click to collapse
asakopak said:
How did you install the TWRP?
when I do, it doesn't stay permanent, I can only access the TWRP at the first boot of the phone, and the root flashing seems correct but it doesn't apply, when I reboot the terminal is not rooted and the TWRP is no longer there available, it has return to the original bootloader.
¿?
Click to expand...
Click to collapse
I did the Magisk built boot.img first.. With that I got root access. After that I flashed the TWRP. Both with so flash.
works perfect! really grateful.
i flash my own patched magisk boot.img and recovery at same time and works, TWRP was fixed and permament.
1 beer for you, dude!
BenjaminX2 said:
I did the Magisk built boot.img first.. With that I got root access. After that I flashed the TWRP. Both with so flash.
Click to expand...
Click to collapse
But is quite useless with data encryption...
EDIT: solved, jsut flash disable_encryption.zip via TWRP and now is perfect.
onizukao said:
But is quite useless with data encryption...
EDIT: solved, jsut flash disable_encryption.zip via TWRP and now is perfect.
Click to expand...
Click to collapse
Dont work for me.
on flashing disable encryption I've a not permission to write on partition message.
[emoji30]
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
When I try to make a backup TWRP reboot after a minute or two....
I have just ordered one on amazon it will be here tomorrow, I will first be working on getting encryption working in twrp and then move on to making a lineage 15.1 rom. I will probably make a new thread in the development section but I will link them here once it's made.
Join this telegram if you want early access and are willing to help test stuff
https://t.me/umi_a1_pro
Status update
I have been able to flash both 8.1 and 9.0 gsi's they boot up but there are various issues with both which I'll list later. I have also gotten a basic device tree up and have successfully made a source built rom for this phone.
Android 9.0 AOSP GSI issues:
Systemui restarts a lot
No telephony whatsoever
No camera
Android 8.1 AOSP GSI issues:
Mobile data doesn't work (Calling/Texting work) and telephony is sensitive to changes and has a high chance of dying fully
No camera
Source built Lineage 15.1 rom issues:
No telephony whatsoever
No camera
Pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Twrp:
I have also taken the base twrp that was provided by twrpbuilders and extended it to almost full functionality, everything except mtp is working (mtp is a bug with twrp itself on newer linux kernels), the twrpbuilder twrp didn't have working adb, sdcard, otg.
Twrp thread:
Here
Source code:
I have pushed my twrp device tree and my lineage-15.1 device tree to my github
https://github.com/deadman96385/android_device_umi_a1pro
https://github.com/deadman96385/twrp_device_umi_a1pro
Join this telegram if you want early access and are willing to help test stuff
https://t.me/umi_a1_pro
closed
abun880007 said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supported Devices
Samsung Galaxy Tab S6 WiFi - T860 (gts6lwifi)
Samsung Galaxy Tab S6 4G - T860 (gts6l)
Click to expand...
Click to collapse
Are you sure with
Samsung Galaxy Tab S6 4G - T860 (gts6l)?
mine (4G) ist SM-T865
Tronje said:
Are you sure with
Samsung Galaxy Tab S6 4G - T860 (gts6l)?
mine (4G) ist SM-T865
Click to expand...
Click to collapse
sorry you are right was a typo
I don't understand why you would need to be on android 10 for a recovery when the recovery is based off TWRP that works on android 9 and 10? I don't get it.
Techguy777 said:
I don't understand why you would need to be on android 10 for a recovery when the recovery is based off TWRP that works on android 9 and 10? I don't get it.
Click to expand...
Click to collapse
It is built with and Android 10 Kernel base so you might get issues with Android 9
Updated to work with BTF2 Tab base
abun880007 said:
It is built with and Android 10 Kernel base so you might get issues with Android 9
Click to expand...
Click to collapse
I'm not going to lie SHRP 2.3 is awesome on my S7. You have magisk manager options inside recovery, themes look nice and new, you have the camera api 2, fingerprint clear options, it really has just about everything. I still think it would be great to allow internet and a web browser I dont know how that would be possible but I could see it. I hope there is a working permissive kernel for android 10 soon.
The best recovery I have ever seen so far !!!
EDIT
Just one request if possible...in file manager there is no function to select multiple files, so if it is possible to add check boxes for multiple selection.
Anyone else unable to mount system with the YouTube vanced installer? I get an error 1.
I have tried turning off the unmount system in the settings.
Timoxa said:
Anyone else unable to mount system with the YouTube vanced installer? I get an error 1.
I have tried turning off the unmount system in the settings.
Click to expand...
Click to collapse
Well I hate to do this to someone but maybe try TWRP 3.4 that the other developer just made. It's only because the system problems with TWRP 3.3.1 based and Android 10 I'm telling you to try 3.4. So sorry devs know it's kinda crappy to say something in your thread but I believe it's only fair because android 10 doesn't play well with TWRP at the moment. Hopefully the next update by Dee's Troy will be the finally fix to the super partition or dynamic partition as they call it.
---------- Post added at 10:08 PM ---------- Previous post was at 10:01 PM ----------
In all honesty I would bet the devs of this recovery are actually using 3.4 if they already knew about it or if they just found out from me they will switch for now. The nasty part of development is a lot of developers don't use their own updates so that's how you have someone put out a new kernel or ROM thinking it works and everyone says no it's a bootloop. Because they are using some other devs kernel or something that works better and they didn't feel like switching because the ROM, kernel, and TWRP that work the best will be the most popular threads basically.
Techguy777 said:
Well I hate to do this to someone but maybe try TWRP 3.4 that the other developer just made. It's only because the system problems with TWRP 3.3.1 based and Android 10 I'm telling you to try 3.4. So sorry devs know it's kinda crappy to say something in your thread but I believe it's only fair because android 10 doesn't play well with TWRP at the moment. Hopefully the next update by Dee's Troy will be the finally fix to the super partition or dynamic partition as they call it.
---------- Post added at 10:08 PM ---------- Previous post was at 10:01 PM ----------
In all honesty I would bet the devs of this recovery are actually using 3.4 if they already knew about it or if they just found out from me they will switch for now. The nasty part of development is a lot of developers don't use their own updates so that's how you have someone put out a new kernel or ROM thinking it works and everyone says no it's a bootloop. Because they are using some other devs kernel or something that works better and they didn't feel like switching because the ROM, kernel, and TWRP that work the best will be the most popular threads basically.
Click to expand...
Click to collapse
This looks to be a YT Vanced issue, I suspect the Magisk module has not been updated.
For anyone hitting this error, just install Vanced youtube with SAI, easy as pie!
Timoxa said:
This looks to be a YT Vanced issue, I suspect the Magisk module has not been updated.
For anyone hitting this error, just install Vanced youtube with SAI, easy as pie!
Click to expand...
Click to collapse
Yeah that's fine that's how I do it. However it doesn't change the fact that right now on Android 10 you should be on TWRP 3.4 as it correct some of the errors in android 10. Hopefully in a week or 2 they will finish TWRP to work 100 percent with the new super partition and a/b setup. I actually looked up super partitions and actually it make sense because it would allow you to make use of all the space on internal because things can take up what they need to and not extra. Don't get me wrong this recovery updated to TWRP 3.4 source would be better yet but still.
Hello~
I couldn't find anything in the BUA1 folder. (GDrive)
Is there anything wrong?
Also, BTK2 folder has data. It's the old version, but...
there is no T860 folder in SForge.
coey0814 said:
Hello~
I couldn't find anything in the BUA1 folder. (GDrive)
Is there anything wrong?
Also, BTK2 folder has data. It's the old version, but...
there is no T860 folder in SForge.
Click to expand...
Click to collapse
Sorry my fault the files are now in the release folder
abun880007 said:
Sorry my fault the files are now in the release folder
Click to expand...
Click to collapse
Thank you very much for responding quickly!
Always thank you for your hard work.
But,,, sorry to bother you,
It looks like the same file has been uploaded to BTK2 folder & BUA1 folder, is this normal?
The hash values are the same,
Please check once.
coey0814 said:
Thank you very much for responding quickly!
Always thank you for your hard work.
But,,, sorry to bother you,
It looks like the same file has been uploaded to BTK2 folder & BUA1 folder, is this normal?
The hash values are the same,
Please check once.
Click to expand...
Click to collapse
Thats not normal, might be GDrive mucking up I will remove and reupload
please close this thread
abun880007 said:
please close this thread
Click to expand...
Click to collapse
Thread closed per OP request.
Hi,
anyone have any kernelSU that works with oneplus 7 pro?
Ive never heard of this however if you are able to compile the kernel with your hardware then you can set it up yourself, Let me know if you end up doing so cause I would like to check it out too! Id build it myself but I have 3gb left on my hard disk...
kernel-assisted-superuser - Kernel assisted means of gaining a root shell for Android
git.zx2c4.com
RolandStoner said:
Ive never heard of this however if you are able to compile the kernel with your hardware then you can set it up yourself, Let me know if you end up doing so cause I would like to check it out too! Id build it myself but I have 3gb left on my hard disk...
kernel-assisted-superuser - Kernel assisted means of gaining a root shell for Android
git.zx2c4.com
Click to expand...
Click to collapse
I don't know how to build it , if you can guide me I will build it .
I just so happened to acquire a few development machines to work with so once I get setup Ill let you know o7
RolandStoner said:
I just so happened to acquire a few development machines to work with so once I get setup Ill let you know o7
Click to expand...
Click to collapse
if you can save a video or screenshots for the steps and share it later it will be appreciated, a draft will be enough
Youll have to excuse my incoherent babbling then
Im almost finished with setting up my devices, after that its going to take a moment for android to dl then ill give it a go
Gotta restart today, didn't expect it to actually cost 200+gb for setup
No Problem, take your time really appreciate your work here,
it will work with android 11 right? as A12 is not stable for oneplus 7 pro
RolandStoner said:
Gotta restart today, didn't expect it to actually cost 200+gb for setup
Click to expand...
Click to collapse
sorry to ask , any update?
loshabih said:
sorry to ask , any update?
Click to expand...
Click to collapse
having some trouble compiling the kernel :/ working on it
going off of lineage 20 btw: https://github.com/LineageOS/android_device_oneplus_guacamole
GitHub - LineageOS/android_kernel_oneplus_sm8150
Contribute to LineageOS/android_kernel_oneplus_sm8150 development by creating an account on GitHub.
github.com
im going to try getting the .config off of my device as a base since i cant seem to find the guac defconfig. After that it should just be running the script and compiling
Alright, I think I figured it out. 3 reinstallations and 1tb later my env is almost complete
Alright I finally know what the **** im doing. Ill post the kernel once it compiles and here is a doc for building yourself
To compile the Android kernel source code, you will need to have a Linux-based d - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
pastebin.com
RolandStoner said:
Alright I finally know what the **** im doing. Ill post the kernel once it compiles and here is a doc for building yourself
To compile the Android kernel source code, you will need to have a Linux-based d - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
pastebin.com
Click to expand...
Click to collapse
sorry for asking ..did you successfully compiled the kernel ?
I have not, i dont think my hw can do it, all my machines keep stalling at some point. if you have the storage space and recommended hardware i can send you all the stuff i have
loshabih said:
sorry for asking ..did you successfully compiled the kernel ?
Click to expand...
Click to collapse
I compiled the kernel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
boot.img for LineageOS 20 with KernelSU
https://drive.google.com/file/d/1xUprcgTg-nsxBIS5I_VDaBju0LLFkKDO/view?usp=sharing
KernelSU for OnePlus 7/7 Pro (Flashable Zip)
https://github.com/snowwolf725/android_kernel_oneplus_sm8150/releases
https://drive.google.com/file/d/1c6Z0dHCXSxmV223L0Ta1gSSJo0tnSpkb/view?usp=share_link
KernelSU Manager APK
https://github.com/tiann/KernelSU/releases
snowwolf725 said:
I compiled the kernel.
View attachment 5829085
boot.img for LineageOS 20 with KernelSU
http://dstats.net/track/2y5x97
KernelSU for OnePlus 7/7 Pro
http://dstats.net/track/2y5yb6
Click to expand...
Click to collapse
URL is not working ..it show disabled .
also does it work with stock OOS11 or i must have LineageOS ?
loshabih said:
URL is not working ..it show disabled .
also does it work with stock OOS11 or i must have LineageOS ?
Click to expand...
Click to collapse
I have updated the links.
The boot.img is only for LineageOS 20.
I'm not sure it work with OOS11 currectly or not.
You should try it by yourself.
You can flash the zip file through TWRP.
snowwolf725 said:
I have updated the links.
The boot.img is only for LineageOS 20.
I'm not sure it work with OOS11 currectly or not.
You should try it by yourself.
You can flash the zip file through TWRP.
Click to expand...
Click to collapse
i will try ..
thanks
zip file caused boot loop, TWRP touch not working, I had to fastboot boot twrp.img
then restore the boot.img backup