Database Info

[Q] HELP please

HELLO! I'm noob on this site so I am 100% that I'm posting on wrong forum or something like that so don;t shout at me
I have a headachke problem... I have GT-s5300 (samsun galaxy pocket) and i can;t flash anything with odin *I'm not noob on that Evrytime I try to flash Odin fails by saing Complete(write) operation failed or it get's stuck o settup connection. If you need more info just write in comments.
WERY IMPORTANT: I'm FROM LITHUANIA SO MY ENGLISH IS NOT BAD BUT NOT PERFECT SO SORRY FOR THAT. Hope sombody could help me
ODIN 1.85
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_s5300_xxlj4.tar.md5 is valid.
<OSM> MODEM_s5300_xxmd1.tar.md5 is valid.
<OSM> CSC_s5300_Oxflh4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN 1.85/ ODIN 3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_s5300_xxlj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_s5300_xxmd1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_s5300_Oxflh4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..

Have u installed the proper drivers for your device? Or kies ?
Hit thanks rather than typing it now Free

Thank you for respones No kies on my PC cuoze I now it can interruopt ODIN flashing progress USB DRIVERS ARE FINE but I forgot to mention that I can't mount my sdcard where is system's backup so I think i might be bricked my phone (again)
Sorry again for bad ENGLISH

Aurimazs said:
HELLO! I'm noob on this site so I am 100% that I'm posting on wrong forum or something like that so don;t shout at me
I have a headachke problem... I have GT-s5300 (samsun galaxy pocket) and i can;t flash anything with odin *I'm not noob on that Evrytime I try to flash Odin fails by saing Complete(write) operation failed or it get's stuck o settup connection. If you need more info just write in comments.
WERY IMPORTANT: I'm FROM LITHUANIA SO MY ENGLISH IS NOT BAD BUT NOT PERFECT SO SORRY FOR THAT. Hope sombody could help me
ODIN 1.85
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_s5300_xxlj4.tar.md5 is valid.
<OSM> MODEM_s5300_xxmd1.tar.md5 is valid.
<OSM> CSC_s5300_Oxflh4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN 1.85/ ODIN 3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_s5300_xxlj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_s5300_xxmd1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_s5300_Oxflh4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
Click to expand...
Click to collapse
go to recovery mode wipe data factory reset, clear cache, dalvik cache and install again in odin
make sure you have downloaded a correct firmware

I can't clear dalvik cache cuose i can't go to sdcard or apply update i can only wipe data and cache. If you can cuold you find me PHILIPHINES GT-s5300 stock rom couse I think that was before becuose im trimg to SEB rom with Lithuanian language.
SORRRY FOR BAD ENGLISH

Aurimazs said:
Thank you for respones No kies on my PC cuoze I now it can interruopt ODIN flashing progress USB DRIVERS ARE FINE but I forgot to mention that I can't mount my sdcard where is system's backup so I think i might be bricked my phone (again)
Sorry again for bad ENGLISH
Click to expand...
Click to collapse
Are you sure the drivers are ok?
Try installing kies..
The odin error seems familiar, chances are that, you might not have been in download mode while flashing
Or that your drivers are incomplete.
BTW please post the link to the thread which you actually followed.
Hit thanks rather than typing it now Free

Ok i'll try to install it... I look threw lots of forums and trheads looking for something new but nothing worked. It even maybe be my usb plug(i fogot at the moment how it's called in ENG so if I'm wrong don't mention it ) because it's for Galaxt ACE not for GT-s5300

Aurimazs said:
I can't clear dalvik cache cuose i can't go to sdcard or apply update i can only wipe data and cache. If you can cuold you find me PHILIPHINES GT-s5300 stock rom couse I think that was before becuose im trimg to SEB rom with Lithuanian language.
SORRRY FOR BAD ENGLISH
Click to expand...
Click to collapse
you need temporary cwm to wipe dalvik cache download temporary cwm and clear from that

I know I can't go to CWM because I cant apply update form sdcard on recovery
After Installing KIES tried to flash again with ODIN
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_s5300_xxlj4.tar.md5 is valid.
<OSM> MODEM_s5300_xxmd1.tar.md5 is valid.
<OSM> CSC_s5300_Oxflh4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Still the same

Aurimazs said:
I OSM> All threads completed. (succeed 0 / failed 1) Still the same
Click to expand...
Click to collapse
1) First you need to use correct version of Odin3 , use only Odin 1.87 with PIT download from here always use fresh Odin, Before flashing do a battery pull and power button press for a min first. than enter download mode. fully charge battery, before flashing
2) what to do when you have setup connection problems Look at My Android Solutions (link below) or any other problem
3) download correct version of ROM for your region, most likely Poland from here
4) follow flashing procedure when using PIT (tick repartition) should be auto ticked, NEVER interrupt flashing,
Check this out! Links to useful Guides and " Banned " Documentaries
Check this out! Links to useful Guides and " Banned " Documentaries ​

Ok I'll try that ,but why can't I use my real region and shuold I use Poland Plus or just Poland at the momment I'm trying Poland Stock ROM as soon as over I will respond

Aurimazs said:
Ok I'll try that ,but why can't I use my real region and shuold I use Poland Plus or just Poland at the momment I'm trying Poland Stock ROM as soon as over I will respond
Click to expand...
Click to collapse
you can use any region that is closest to you for network coverage to work for you. , as I think Lithuania is not supported
Check this out! Links to useful Guides and " Banned " Documentaries ​

I'm trying right now But i bought this phone with Lith language included still thanks

THIS IS WAT I GOT Now looking forward to yor soliutions my problems are 3; 8; 11
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXMD1_S5300OXXMD1_RST_S5300XXMD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

None of soliutions didn't help still can't flash :crying:

Aurimazs said:
THIS IS WAT I GOT No looking forward to yor soliutions my problems are 3; 8; 11
Click to expand...
Click to collapse
ok, this phone is fairly new as its earliest ROM, is 2.3.6 and 2012 series, so is your phone still under warranty? if so you should let Samsung solve it for free.
otherwise
1) you can connect it to KIES and see what is its response, ( does it have any updates?
2) you don't have recovery , right? so try flashing a stock kernel from here use ,tar for Odin flash, untick reboot and remove battery after flash, to enter recovery mode by combo keys, than you can flash CWM as update following above guide and enter CWM to flash custom ROM
Check this out! Links to useful Guides and " Banned " Documentaries ​

Okey so the below soliutions didn't work Kies always says connecting and after a few minutes it's says connect device
Now with warranty I didn't found until when warranty overs but I had already when then a 8 months ago(I guess) with almost the same problem, but right now it's already 1 year and 1d when i bought it so i think warranty is gone
If you don't have anything to offer for my I want to ask is there other flashers than odin if not how would it cost to repair my phone

OMG!!!!!!!!!! I found out what was wrong. you see i was trying to flash my SGP and it again got stuck on Setup conection so i opened task manager on Win7 and I spotted this :3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In ENG it mean USB DEVICE UNKNOWN
SO PLEASE HELP ME TO SOLVE IT ALREADY HIT THANK TO ALL OF YOU

Aurimazs said:
Okey so the below soliutions didn't work Kies always says connecting and after a few minutes it's says connect device
Now with warranty I didn't found until when warranty overs but I had already when then a 8 months ago(I guess) with almost the same problem, but right now it's already 1 year and 1d when i bought it so i think warranty is gone
If you don't have anything to offer for my I want to ask is there other flashers than odin if not how would it cost to repair my phone
Click to expand...
Click to collapse
no only odin is there for samsung to unbrick phone
if you can enter recovery mode you can use cwm or twrp

Aurimazs said:
In ENG it mean USB DEVICE UNKNOWN )
Click to expand...
Click to collapse
First, in Europe, I think Samsung warranty is for two years, so check that, where you bought your phone.
Second, unknown device or USB connection problems can be solved by following this
Third when using Odin3, KIES must be killed by Opening task manager on your PC and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe or it will cause setup connection errors in Odin
Fourth, try the stock ROM again with the PIT file or just the stock kernel to get 2e recovery
Fifth, you can use Heimdall to flash ( but you must know how to unpack your ROM for doing this) or you can try the many other flashers in MY Android Collections under recovery tools using ADB to connect and flash
Check this out! Links to useful Guides and " Banned " Documentaries ​

Samsung galaxy s4 mini GT-I9195 bricked without doing anything.

Hi all, my S4 mini won't turn on, while i was messaging, the display shutting down and can't turn on it.
When i connected it to my pc, my pc found new driver: QHSUSB_DLOAD. I searched it on google and i discovered that my phone was bricked without doing anything. So i flashed a sdcard with debrick.img and my phone finally showed:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
BOOT RECOVERY
WRITE 139008 sectors
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-i9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANT VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
So i tried to flash it with Odin and after Odin said:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_shi p_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULT I_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_M ULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So i searched on internet PIT files and i found "CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit", i tried to flash with it and Odin show same thing:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
While on the phone showed:
Code:
PIT FAIL : TOTAL SECTORS 0
ODIN flash read failure
I tried nand flash erase and show me other errors.
I think emmc died, if not, can anyone help me?
if emmc died, how can i install all partition ( bootloader ecc.) on sdcard for start the phone with it?

supergatto said:
Hi all, my S4 mini won't turn on, while i was messaging, the display shutting down and can't turn on it.
When i connected it to my pc, my pc found new driver: QHSUSB_DLOAD. I searched it on google and i discovered that my phone was bricked without doing anything. So i flashed a sdcard with debrick.img and my phone finally showed:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
BOOT RECOVERY
WRITE 139008 sectors
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-i9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANT VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
So i tried to flash it with Odin and after Odin said:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_shi p_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULT I_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_M ULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So i searched on internet PIT files and i found "CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit", i tried to flash with it and Odin show same thing:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
While on the phone showed:
Code:
PIT FAIL : TOTAL SECTORS 0
ODIN flash read failure
I tried nand flash erase and show me other errors.
I think emmc died, if not, can anyone help me?
if emmc died, how can i install all partition ( bootloader ecc.) on sdcard for start the phone with it?
Click to expand...
Click to collapse
here same

Can anyone help me?

@supergatto @espaciox99
I had the same problem with my galaxy s4 (gt-9505) where it didn't want to flash stock rom but I was able to root the phone (with cf autoroot) and also able to flash cwm recovery and flash resurrection remix and it's working fine now. Try it out and tell me if it works (better custom than nothing) and don't forget to press the thanks button .

a. felon said:
@supergatto @espaciox99
I had the same problem with my galaxy s4 (gt-9505) where it didn't want to flash stock rom but I was able to root the phone (with cf autoroot) and also able to flash cwm recovery and flash resurrection remix and it's working fine now. Try it out and tell me if it works (better custom than nothing) and don't forget to press the thanks button .
Click to expand...
Click to collapse
I tried CF-Auto-Root by this http://download.chainfire.eu/425/CF...Auto-Root-serranolte-serranoltexx-gti9195.zip
It says to use PIT file, i tried with it, and show same error of first post.

supergatto said:
I tried CF-Auto-Root by this http://download.chainfire.eu/425/CF...Auto-Root-serranolte-serranoltexx-gti9195.zip
It says to use PIT file, i tried with it, and show same error of first post.
Click to expand...
Click to collapse
Try with this method, it worked for me http://forum.xda-developers.com/showthread.php?t=2364980 good luck.
Don't just say thanks, press the ? button.

a. felon said:
Try with this method, it worked for me http://forum.xda-developers.com/showthread.php?t=2364980 good luck.
Don't just say thanks, press the button.
Click to expand...
Click to collapse
Here the result...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

supergatto said:
Here the result...
Click to expand...
Click to collapse
This is the only thing I could find, hope it solves your problem bro.
Follow radicspeter's method as it's the one that seems to work. http://forum.xda-developers.com/showthread.php?t=2469375&page=2 Tell us if it works because @espaciox99 has the same problem like you, good luck.

Thanks for reply.
Code:
<ID:0/013> Odin engine v(ID:3.1100)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013>
<ID:0/013> There is no PIT partition.
After used PIT file.
Code:
<ID:0/013> Odin engine v(ID:3.1100)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> FAIL!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.

UP

UP

UP

Your eMMC is definitively bricked, or at least it seems to be.
I didn't find any solution for that on quick, but you could be able to manually repartition your sd card. I see your device is booting from sd card, so maybe you could give a try to plug in the SD into a linux machine and see what it shows you.

xdvs23 said:
Your eMMC is definitively bricked, or at least it seems to be.
I didn't find any solution for that on quick, but you could be able to manually repartition your sd card. I see your device is booting from sd card, so maybe you could give a try to plug in the SD into a linux machine and see what it shows you.
Click to expand...
Click to collapse
I did it, and show 24 partitions like modem, sbl1, sbl2, sbl3, recovery, system, tz, hidden, cache, efs, and others, but if i want boot android with sdcard on my phone, how can i do?
I tried to copy eMMC from another S4 mini GT-I9195 on sdcard with "busybox dd..." command and it show same thing of pics.
Other thing that i tried on my phone with Odin: I tried to repartition eMMC with PIT and CSC and both show same thing of pics.

supergatto said:
I did it, and show 24 partitions like modem, sbl1, sbl2, sbl3, recovery, system, tz, hidden, cache, efs, and others, but if i want boot android with sdcard on my phone, how can i do?
I tried to copy eMMC from another S4 mini GT-I9195 on sdcard with "busybox dd..." command and it show same thing of pics.
Other thing that i tried on my phone with Odin: I tried to repartition eMMC with PIT and CSC and both show same thing of pics.
Click to expand...
Click to collapse
Good, I don't know if you need to install a bootloader but there are couple of videos showing how you can boot from sdcard by modifying the hardware.

xdvs23 said:
Good, I don't know if you need to install a bootloader but there are couple of videos showing how you can boot from sdcard by modifying the hardware.
Click to expand...
Click to collapse
Can you post some video? I didn't find it...

supergatto said:
Can you post some video? I didn't find it...
Click to expand...
Click to collapse
I found this on quick.

xdvs23 said:
I found this on quick.
Click to expand...
Click to collapse
In the video show same thing that i did... Except disassembling the phone. And this doesn't work.

supergatto said:
In the video show same thing that i did... Except disassembling the phone. And this doesn't work.
Click to expand...
Click to collapse
Ok so I don't know if there is any way to fix that. I also had a eMMC brick but on a S3 mini. If you did not install custom software you can send it for repair to samsung. If your warranty is already void you can pay for them to repair it but that would be expensive. You can also look for a eMMC replacement and replace it yourself. That could cost around 40 bucks, depending on what you need to order (dollars or euros).
Your emmc is now write-protected that means you simply can not flash anything. A reason for the brick can be overwriting the same file many times, using poorly developed apps or software / ROMs, daily backups in messaging apps, but also flashing many many many times could potentially make the eMMC to die. That is well-known on Samsung devices.

Is there any way for boot android from sdcard without replacing eMMC?
I found other thread with write protection: enabled but they can flash..
http://forum.xda-developers.com/showthread.php?t=2322185

Samsung j727P Virgin odin fail and bootloop

Hi ...i tried some method to root my phone and now its firmware gets break..I have tried everything i have founded ..like stock rom from internet and downloaded official rom from sammobile still have the issue..getting error while flashing the files
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the phone screen also
SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
[1] eMMC write fail : ABOOT
plz help me i tried smart switch also its asking for recovery code
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If u know the solution for sure knock me in fb contact here

Virgin mobile galaxy J727P
parthaxda007 said:
Hi ...i tried some method to root my phone and now its firmware gets break..I have tried everything i have founded ..like stock rom from internet and downloaded official rom from sammobile still have the issue..getting error while flashing the files
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the phone screen also
SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
[1] eMMC write fail : ABOOT
plz help me i tried smart switch also its asking for recovery code
If u know the solution for sure knock me in fb contact here
Click to expand...
Click to collapse
Ok what build were you on when this all started an what firmware build did you use to try an fix your phone ? An what rooting process did you use to start with ? Let me know maybe I can help !

peter couniaz said:
Ok what build were you on when this all started an what firmware build did you use to try an fix your phone ? An what rooting process did you use to start with ? Let me know maybe I can help !
Click to expand...
Click to collapse
can u contact me in facebook plz the better way i can tell u
facebook.com/sahapartha15
tahnk u

SM-T585 Odin FAIL

Hello,
so i wanted to downgrade my Galaxy Tab A (SM-T585) to android 6.0.1 and so i downloaded firmware from sammobile and i downloaded odin. Extracted all files to folder and then i put my tablet in download mode and then put files in Odin and pressed start but it keeps giving me some kind of FAIL. Please if anyone can help i need it. Here is the log:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sorry if im putting this in wrong Thread, i just made xda profile 2 mins ago.
Please help!!!!!

Can't get Odin to work for the life of me

I'm trying to get Odin to work so I can flash my bootlooped S7 back to stock ROM, but I can't get it to work at all. There are so many different "solutions" online, and none of them are working. I've followed the steps in this guide, downloaded and installed the USB drivers, using Odin3 v.3.13, using the SM-G930F AP/CSC files for my country and model downloaded from updato, and I'm still getting this error in Odin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> modem_debug.bin
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 4404 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I suspect it's an issue with the drivers. When I plug the USB into the port, I get a "Installing device drivers" window, which recognizes two different devices: "SAMSUNG Mobile USB CDC Composite Device" and "SAMSUNG Mobile USB Modem". The CDC Composite Device is version 2.12.5.0. The Mobile USB Modem is version 2.12.4.0. I've pointed the modem to the USB drivers downloaded in the guide I'm following, but still get the Complete(Write) failed error, switched USB ports, still get the error, switched USB cables, still get the error, tried it with and without "Nand Erase" and "Re-Partition" checked, still get it, tried different Odin versions, still get it. Nothing is working, I've been at this for hours and am at my wit's end. Can someone please help?
Thank you.

S7
Were you able to solve this problem?
I also have the same error in my galaxy s7
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

These things I say might be long shots but well here I go:
For the drivers (if on Windows), disable automatic driver searching and then completely remove the samsung drivers and reboot. Then re-install them with your phone disconnected, reboot your computer again and then connect your phone while it is booted to system and make sure you select charging only or MTP.
Could also go advanced mode and look for leftovers in the registry of the samsung drivers if you know how to.
Or try downloading the latest firmware "G930FXXU2EREM" and try flashing it, if you succeed then you can flash your country/carriers CSC later and possibly modem if you experience low signal.

try running odin in admin rights or double check if the files you got are the correct one's.

You should use the PIT file from CSC file.