SM-T585 Odin FAIL - General Questions and Answers

Hello,
so i wanted to downgrade my Galaxy Tab A (SM-T585) to android 6.0.1 and so i downloaded firmware from sammobile and i downloaded odin. Extracted all files to folder and then i put my tablet in download mode and then put files in Odin and pressed start but it keeps giving me some kind of FAIL. Please if anyone can help i need it. Here is the log:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sorry if im putting this in wrong Thread, i just made xda profile 2 mins ago.
Please help!!!!!

Related

Please help odin error s8+ g9550

my phone stuck at samsung logo while updating to oreo, then i tried to upgrade it using odin its keep give me error. please help me to fix it,, TIA
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf.lz4
<ID:0/003> Complete(Write) operation failed.
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try with odin 3.13

Trying to Flash ROM from a SM-J327A to SM-J327U

Hi,
I am trying to flash a stock rom (Sm-j327u) to an unlocked ATT Galaxy J3 (sm-j327a). I downloaded ODIN and downloaded the firmware files and connected the phone and put it in download mode and did all that. I add each file to odin according to AP, CP etc.. Well I press start and it fails. Trying to enable WIFI calling and VoLTE with tmobile SIM.
here is the info it gives me:
<ID:0/007> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anything I'm missing? Can the ATT J3 even be flashed with the unlocked firmware version? all the tutorials on here make it seem that its super easy to do.
Thex415 said:
Hi,
I am trying to flash a stock rom (Sm-j327u) to an ATT Galaxy J3 (sm-j327a). I downloaded ODIN and downloaded the firmware files and connected the phone and put it in download mode and did all that. I add each file to odin according to AP, CP etc.. Well I press start and it fails. Trying to enable WIFI calling and VoLTE with tmobile SIM.
here is the info it gives me:
<ID:0/007> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any help is appreciated.
Click to expand...
Click to collapse
Signature is invalid as far as the bootloader is concerned. You can only flash roms that is made for your specific device which happens to be J327A. Oh the J327U is the international version of this device. The J327T is tmobile.
thepcwiz101 said:
Signature is invalid as far as the bootloader is concerned. You can only flash roms that is made for your specific device which happens to be J327A. Oh the J327U is the international version of this device. The J327T is tmobile.
Click to expand...
Click to collapse
Nothing can be done? I have a tmobile sim on the sm-j327a and trying to make the wifi calling and volte work on the phone.
Ok so i used a modified version of Odin for the SHA issue. Then i tried again with a TMO firmware then I get this error.
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I guess its the bootloader preventing this? Is there some modified version of the SM-J327a that can let me use VOLTE and WIFI calling with a Tmobile sim ??
Thex415 said:
Ok so i used a modified version of Odin for the SHA issue. Then i tried again with a TMO firmware then I get this error.
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I guess its the bootloader preventing this? Is there some modified version of the SM-J327a that can let me use VOLTE and WIFI calling with a Tmobile sim ??
Click to expand...
Click to collapse
nope sorry in order to use wifi calling on tmobile you have to get a tmobile phone.
thepcwiz101 said:
nope sorry in order to use wifi calling on tmobile you have to get a tmobile phone.
Click to expand...
Click to collapse
Oh well. Thank you for your answers!! I appreciate it.
Thex415 said:
Oh well. Thank you for your answers!! I appreciate it.
Click to expand...
Click to collapse
no problem
Thex415 said:
Oh well. Thank you for your answers!! I appreciate it.
Click to expand...
Click to collapse
VOLTE is usually enabled in the CSC. You can try and flash everything but BL or just CSC. YMMV.
Thex415 said:
Ok so i used a modified version of Odin for the SHA issue. Then i tried again with a TMO firmware then I get this error.
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I guess its the bootloader preventing this? Is there some modified version of the SM-J327a that can let me use VOLTE and WIFI calling with a Tmobile sim ??
Click to expand...
Click to collapse
Try SM-J337A but I'm having a hard time finding it, tmobile and metropcs are same ISP
Gamer110592 said:
Try SM-J337A but I'm having a hard time finding it, tmobile and metropcs are same ISP
Click to expand...
Click to collapse
any device model above J327 is the 2018 version of the J3. J327 devices must be flashed only with J327 firmware. Higher model numbers have different motherboards i believe.
thepcwiz101 said:
any device model above J327 is the 2018 version of the J3. J327 devices must be flashed only with J327 firmware. Higher model numbers have different motherboards i believe.
Click to expand...
Click to collapse
Okay but motherboards and firmware are two different things. No one has proved the the J337 firmware won't go into the J327 yet. But the writer of the page wanted to enable wifi calling and was using an AT&T SIM card. Here's what I know of. I have two J327ts that are unlocked. On one I have a T-Mobile varient for cell service the other has AT&T service. n the T-Mobile I can use the wifi calling. On the AT&T I cannot use wifi calling. The feature is on the phone, it is AT&T that is not useing the service and therefore you do not get it.

Need help unbricking SM-j737P

I bricked my J7 refine by turning off OEM mode and USB debugging. Whenever it trys to boot it says custom binary blocked by the FRP lock. Ive tried flashing the original files with odin and am getting this error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4093 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
stonepig said:
I bricked my J7 refine by turning off OEM mode and USB debugging. Whenever it trys to boot it says custom binary blocked by the FRP lock. Ive tried flashing the original files with odin and am getting this error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4093 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If it's just soft bricked and you can still connect to Odin and get into the download menu then follow my root guide, that should set you back right. If you dont want root then just do the step involving flashing the stock firmware files via the unpatched odin3 tool.
https://forum.xda-developers.com/galaxy-j7/how-to/samsung-galaxy-j7-refine-root-magisk-t3924967

Galaxy j4+ android downgrade fail.

Hello. Im trying to downgrade my android version from 9.0 to 8.1.0 on my samsug galaxy j4+. Im getting this error in odin:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1303)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 4314 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried different usb cabels and ports. i run odin as a administrator but nothing helps. What can i do? I downloaded the firmware from sammobile.
prozocker said:
Hello. Im trying to downgrade my android version from 9.0 to 8.1.0 on my samsug galaxy j4+. Im getting this error in odin:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1303)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 4314 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried different usb cabels and ports. i run odin as a administrator but nothing helps. What can i do? I downloaded the firmware from sammobile.
Click to expand...
Click to collapse
Yep, downgrade is impossible
ModeliST said:
Yep, downgrade is impossible
Click to expand...
Click to collapse
I get the very same error even if I try to flash the last official firmware. This never happened to me before.

Problem flashing with ODIN. Help

Good afternoon, I want to ask for your support, I have a samsung galaxy fold z2 which is the model SM-F916U1, I am currently on the F916U1UEU2EUH8 firmware, and I would like to change it to the F916BXXS2EUI1 Firmware, this because I require my device to have a Firmware of Mexico, I read in this forums that i need to use Odin Patch, or uncheck repartition, but i tried to perform the operation with Odin Patch 3.14, with CSC File, Odin throw the following problem, and i do not have the repartition selected:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 10259 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And with CSC HOME File, Odin throw the following problem:
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> quest.fv
<ID:0/003> testvector.fv
<ID:0/003> spunvm.bin
<ID:0/003> persist.img
<ID:0/003> userdata.img
<ID:0/003> metadata.img
<ID:0/003> dqmdbg.img
<ID:0/003> misc.bin
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 9271 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you very much for your support.

Categories

Resources