Samsung j727P Virgin odin fail and bootloop - Samsung Galaxy J7 Questions & Answers

Hi ...i tried some method to root my phone and now its firmware gets break..I have tried everything i have founded ..like stock rom from internet and downloaded official rom from sammobile still have the issue..getting error while flashing the files
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the phone screen also
SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
[1] eMMC write fail : ABOOT
plz help me i tried smart switch also its asking for recovery code
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If u know the solution for sure knock me in fb contact here

Virgin mobile galaxy J727P
parthaxda007 said:
Hi ...i tried some method to root my phone and now its firmware gets break..I have tried everything i have founded ..like stock rom from internet and downloaded official rom from sammobile still have the issue..getting error while flashing the files
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the phone screen also
SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
[1] eMMC write fail : ABOOT
plz help me i tried smart switch also its asking for recovery code
If u know the solution for sure knock me in fb contact here
Click to expand...
Click to collapse
Ok what build were you on when this all started an what firmware build did you use to try an fix your phone ? An what rooting process did you use to start with ? Let me know maybe I can help !

peter couniaz said:
Ok what build were you on when this all started an what firmware build did you use to try an fix your phone ? An what rooting process did you use to start with ? Let me know maybe I can help !
Click to expand...
Click to collapse
can u contact me in facebook plz the better way i can tell u
facebook.com/sahapartha15
tahnk u

Related

Can't get Odin to work for the life of me

I'm trying to get Odin to work so I can flash my bootlooped S7 back to stock ROM, but I can't get it to work at all. There are so many different "solutions" online, and none of them are working. I've followed the steps in this guide, downloaded and installed the USB drivers, using Odin3 v.3.13, using the SM-G930F AP/CSC files for my country and model downloaded from updato, and I'm still getting this error in Odin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> modem_debug.bin
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 4404 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I suspect it's an issue with the drivers. When I plug the USB into the port, I get a "Installing device drivers" window, which recognizes two different devices: "SAMSUNG Mobile USB CDC Composite Device" and "SAMSUNG Mobile USB Modem". The CDC Composite Device is version 2.12.5.0. The Mobile USB Modem is version 2.12.4.0. I've pointed the modem to the USB drivers downloaded in the guide I'm following, but still get the Complete(Write) failed error, switched USB ports, still get the error, switched USB cables, still get the error, tried it with and without "Nand Erase" and "Re-Partition" checked, still get it, tried different Odin versions, still get it. Nothing is working, I've been at this for hours and am at my wit's end. Can someone please help?
Thank you.
S7
Were you able to solve this problem?
I also have the same error in my galaxy s7
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
These things I say might be long shots but well here I go:
For the drivers (if on Windows), disable automatic driver searching and then completely remove the samsung drivers and reboot. Then re-install them with your phone disconnected, reboot your computer again and then connect your phone while it is booted to system and make sure you select charging only or MTP.
Could also go advanced mode and look for leftovers in the registry of the samsung drivers if you know how to.
Or try downloading the latest firmware "G930FXXU2EREM" and try flashing it, if you succeed then you can flash your country/carriers CSC later and possibly modem if you experience low signal.
try running odin in admin rights or double check if the files you got are the correct one's.
You should use the PIT file from CSC file.

stuck on sboot.bin when try to flash stock firmware SM-G955FD

First I got stuck in the "custom binary blocked FRP lock". and when i try to flash stock firmware, odin fails with some sboot.bin error...please help me someone
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
assassin410 said:
First I got stuck in the "custom binary blocked FRP lock". and when i try to flash stock firmware, odin fails with some sboot.bin error...please help me someone
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Stuck at the same issue, the problem probably is that the bootloader is the newest V3 version, which is not Downgradeable for now.
RapsodyR55 said:
Stuck at the same issue, the problem probably is that the bootloader is the newest V3 version, which is not Downgradeable for now.
Click to expand...
Click to collapse
I got the same problem, so do we have to wait for a new Odin Version?
I am also stuck at this situation. Completed the rooting process on my S8 950FD after installing some custom apps, it force reboot and is stuck in a boot loop with (only official release binaries are allowed to be flashed). I then try to flash it back to stock firmware but was successful, and had the same log messages as thread starter.
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I use:
Odin3 v3.13.1
Samsung firmware: Galaxy S8 SM-G950FD 8.0.0 June 15, 18 Singapore (XSP) G950FXXU2CREH
Stuck here as well!

Need help unbricking SM-j737P

I bricked my J7 refine by turning off OEM mode and USB debugging. Whenever it trys to boot it says custom binary blocked by the FRP lock. Ive tried flashing the original files with odin and am getting this error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4093 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
stonepig said:
I bricked my J7 refine by turning off OEM mode and USB debugging. Whenever it trys to boot it says custom binary blocked by the FRP lock. Ive tried flashing the original files with odin and am getting this error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4093 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If it's just soft bricked and you can still connect to Odin and get into the download menu then follow my root guide, that should set you back right. If you dont want root then just do the step involving flashing the stock firmware files via the unpatched odin3 tool.
https://forum.xda-developers.com/galaxy-j7/how-to/samsung-galaxy-j7-refine-root-magisk-t3924967

Problem flashing with ODIN. Help

Good afternoon, I want to ask for your support, I have a samsung galaxy fold z2 which is the model SM-F916U1, I am currently on the F916U1UEU2EUH8 firmware, and I would like to change it to the F916BXXS2EUI1 Firmware, this because I require my device to have a Firmware of Mexico, I read in this forums that i need to use Odin Patch, or uncheck repartition, but i tried to perform the operation with Odin Patch 3.14, with CSC File, Odin throw the following problem, and i do not have the repartition selected:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 10259 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And with CSC HOME File, Odin throw the following problem:
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> quest.fv
<ID:0/003> testvector.fv
<ID:0/003> spunvm.bin
<ID:0/003> persist.img
<ID:0/003> userdata.img
<ID:0/003> metadata.img
<ID:0/003> dqmdbg.img
<ID:0/003> misc.bin
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 9271 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you very much for your support.

Samsung galaxy note 10.1 wont start

I am trying to get my samsung galaxy note 10.1 going again. Its fault condition is that it starts to boot gets the the carriers splash screen drops that off and just sits there with samsung displayed accross the screen. I downloaded/installed the samsung usb drivers. It connects to odin v3.14 ok with the blue indication. I downloaded the correct model and region file matching my model gt-n8020 (for carrier optus) zip file and unzipped it. it has AP BL and CSC dot md5 files. when I put the pad into download mode and run odin it errors. Would really appreciate if you can take a look at the log file errors and help with any ideas. thanks
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start.. <ID:0/008>
NAND Write Start!! <ID:0/008> SingleDownload.
<ID:0/008> boot.img
<ID:0/008> FAIL! <ID:0/008>
<ID:0/008> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
usually you will need 4x files, but that's not the error. as this outdated tablet is end of life try older version of Odin3 v3.10. you can also try heimdall frontend or cmd line tool. But consider it's simply emmc weared-out.
BL_*.tar.md5
AP_*.tar.md5
CP_*.tar.md5
CSC_*.tar.md5
aIecxs said:
usually you will need 4x files, but that's not the error. as this outdated tablet is end of life try older version of Odin3 v3.10. you can also try heimdall frontend or cmd line tool. But consider it's simply emmc weared-out.
BL_*.tar.md5
AP_*.tar.md5
CP_*.tar.md5
CSC_*.tar.md5
Click to expand...
Click to collapse
thankyou for the suggestion & info. I will try heimdell too. It fails under odin very quickly so I wonder if it has a valid comms link even though odin displays a link. Is there any way of monitoring the odin data packets I wonder?
check Odin3 folder for logfile
ok then thankyou
I checked the odin folder, no log file in there? The only log file I can see is the log tab in the application.
iank1000 said:
thankyou for the suggestion & info. I will try heimdell too. It fails under odin very quickly so I wonder if it has a valid comms link even though odin displays a link. Is there any way of monitoring the odin data packets I wonder?
Click to expand...
Click to collapse
iank1000 said:
thankyou for the suggestion & info. I will try heimdell too. It fails under odin very quickly so I wonder if it has a valid comms link even though odin displays a link. Is there any way of monitoring the odin data packets I wonder?
Click to expand...
Click to collapse
When I download the config files for my device I see an AP_ a BL_ and CSC_ files but dont see a CP_ file ?
CP_ is for modem/baseband updates maybe not included in OTA update. download full firmware from samfw.com
ok thanks will do
Thought I would try odin once more
Downloaded Config files from Samfw.com
Fails per log output below
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1303)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 1746 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is not Odin3 v3.10. try again with Odin3 v3.10.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I went looking for v3.10 but on thier website the oldest was v3.13.1. I will look around again for v3.10 odindownloader site lists v3.10.7 .6 and .5 so will try .5
unfortunately there is no official trustworthy download site for Odin3. you can get old version here.
Odin3 v3.13.1
Odin is a utility software developed and used internally by Samsung which can be used to flash a Custom Recovery firmware image (as opposed to the Stock recovery firmware image) to a Samsung Android device. It is also used as a way of unbricking...
forum.xda-developers.com
same result
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N8020XXUDNK1_CL3268618_QB2949266_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N8020XXUDNK1_CL3268618_QB2949266_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OPS_N8020OPSDNL1_CL3268618_QB3510213_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
extract pit file from CSC, enable checkbox Re-partitioning, select pit file in it's own slot, flash together with BL AP (CP) and CSC (not sure about CP is missing, tough)
WARNING: double check pit file matches your phone model!
TRY AT OWN RISK (random guide)
https://technastic.com/odin-nand-erase-samsung
thanks will try & advise. really appreciate the help
extracted pit file from csc file.
selected bl ap & csc file
under pit option selected pit file
same result failed
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N8020XXUDNK1_CL3268618_QB2949266_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N8020XXUDNK1_CL3268618_QB2949266_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OPS_N8020OPSDNL1_CL3268618_QB3510213_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
you can try heimdall
yes have been on that track. yet to overcome the missing .dll file at run time despite trying a few installs & work arounds to install
Microsoft Visual C++ 2010 runtimes. will have another go tomorrow
why not just use linux? you can also run in WSL

Categories

Resources