hi, I wanted flash a custom rom in my Redmi Note 11 Pro+ which is not the 5g model but I accidently flash an another vendor_boot from a other model and he stuck in Fastboot mode. when I execute the adb devices the phone is not detected by adb but when fastboot devices, the devices is now detected. I tried to flash stock rom but nothing happens.
I had a similar problem last week and I solved it yesterday. Commands did nothing but Xiaomi's flash tool did. :
Go to http://new.c.mi.com/global/miuidownload/detail/guide/1
Click on the fastboot tab
Download the MIUI ROM Flashing Tool (step 1)
Download your ROM (step 2). If you bought your phone in Europe, it's the EEA version. Otherwise I suspect you need the Global one.
Unzip the files into their own folders
Open the MIUI ROM Flashing Tool
Paste the path of your ROM folder in the tool
Click refresh
Click flash
It will then take about 12 minutes to flash
Related
Hello,
i flashed BLISS GSI onto my mi 10 pro,, into super partition.
No error, but after rebot stuck in fastboot
can execute fastboot flash recovery twrp.img
flashing correctly
fastboot reboot get me back to fastboot
downloaded stock miui 12 global fastboot file, extracted, connected the cmi
device is detected, flash..
flash started and now i get arb error?
mi 10 pro doesnt have ARB as far as i know?
i tried several miflash versions, till miflash 20200314
Anybody can help me recover
marcel112 said:
Hello,
i flashed BLISS GSI onto my mi 10 pro,, into super partition.
No error, but after rebot stuck in fastboot
can execute fastboot flash recovery twrp.img
flashing correctly
fastboot reboot get me back to fastboot
downloaded stock miui 12 global fastboot file, extracted, connected the cmi
device is detected, flash..
flash started and now i get arb error?
mi 10 pro doesnt have ARB as far as i know?
i tried several miflash versions, till miflash 20200314
Anybody can help me recover
Click to expand...
Click to collapse
Don't to use miflash
Just unzip the rom file
Open folder
Connect to fastboot
Use flash all. The Windows batch file
Rom will be successfully flashing and booting
rowihel2012 said:
Don't to use miflash
Just unzip the rom file
Open folder
Connect to fastboot
Use flash all. The Windows batch file
Rom will be successfully flashing and booting
Click to expand...
Click to collapse
so i connect the phone, recornized but pc.
i go to fastboot in the correct folder where the files are and the...?
marcel112 said:
so i connect the phone, recornized but pc.
i go to fastboot in the correct folder where the files are and the...?
Click to expand...
Click to collapse
You format after flashing bliss?
james1089 said:
You format after flashing bliss?
Click to expand...
Click to collapse
No, i think that was the mistake.
I got the phone back up again, with help from other mi 10 pro user on telegram.
The fault was that i didnt put my images file and folder in the root of c drive
after that all good :victory:
marcel112 said:
No, i think that was the mistake.
I got the phone back up again, with help from other mi 10 pro user on telegram.
The fault was that i didnt put my images file and folder in the root of c drive
after that all good :victory:
Click to expand...
Click to collapse
Same Issue here how did you fixed it?
like i said. make adb in the root off c drive.
also put the fastboot rom in the c root. then miflash will recornize the fastboot rom without errors
{Mod edit: Quoted post has been deleted}
Was already up off course .. was 9 months ago. Used other cable , other port and flashed from c root
I am a POCO X2 user. Currently, I flashed the oxygen os file with TWRP recovery. But now I am stuck on fastboot menu. I tried many methods. But unable to exit from fastboot. I can only open twrp from fastboot. I search the reason behind it on the internet and I found a single way to solve this error that I have to install fastboot ROM of my device. But now I am confused that which fastboot file I should download. My device is POCO X2. But I flashed one plus os( oxygen os).
Flash stock rom on your device
i recently rooted my phone with magisk patched boot image and was working good after i restored my files, then it rebooted itself and now its stuck on orange state then going to fastboot mode, after that it loops back to orange state over and over again, please help
Reflash phone's Stock ROM to get rid off of all modifications you applied so far.
and what if i want to root the phone? flashing the stock rom gets rid of magisk, am i stuck without an option to root it? or should i install a custom recovery or cus os like calyxos?
new problem, i cant flash the stock rom using sp flash tool, gives me this weird error:
STATUS_BROM_CMD_STARTCMD_FAIL
any help?
I did this to my old phone if sp flash ain't working
"fasboot flash all slot a". if a/b partition
"fastboot flash all". if not a/b partition
and I feel like this method is faster than sp flash tool
edit:
lucky you could go to fastboot unlike mine can't go anywhere when I tried to flash my device it just reboot after 6 or 5 seconds ;-;
Does somebody have the stock rom for Infinix Hot 10 Play X688B?
There is the builder number X688B-H659ABCEFGHI-Q-GL-220109V524
Tzuyoda said:
Does somebody have the stock rom for Infinix Hot 10 Play X688B?
There is the builder number X688B-H659ABCEFGHI-Q-GL-220109V524
Click to expand...
Click to collapse
Download Infinix Stock ROM for all models (Latest Firmware)
Download the latest Infinix Stock ROM Firmware (Flash File) for all the available Infinix smartphones, feature phones, and tablets.
androidmtk.com
I could only find this one site that has all of the stock roms of XOS. Not exactly the model number. Just a 'c' and 'b' difference
Did you fix it? If not I can help you
I think the stock roms would work.
boomzkik said:
Did you fix it? If not I can help you
Click to expand...
Click to collapse
do you have the latest firmware files? i removed root and updated ota and i cant find any source of firmwares online, only the stock ones. can i use stock boot.img and patch it with magisk then install the patched stock boot.img with fastboot on an updated firmware?
mlgpro12345 said:
i recently rooted my phone with magisk patched boot image and was working good after i restored my files, then it rebooted itself and now its stuck on orange state then going to fastboot mode, after that it loops back to orange state over and over again, please help
Click to expand...
Click to collapse
Please I need your help on how you were able to root your infinix hot 10. I have the same phone and I was following YouTube tutorials they told me to use minimal adb and fastboot.. all the commands worked great but when I use command fastboot flash boot and paste my patched boot img it shows error... Unknown partition cannot determine image filename for boot img or so.
I am running the latest version of realme 5i android 10 which is RMX2030EX_11_C.77
so is there anyone here has that steps to root Realme 5i "without" rolling back to android 9? honest answers are appreciated
If anyone requires a pc, I have one, and please do provide files that I can use for rooting and installing twrp
Daftskrillpunk said:
I am running the latest version of realme 5i android 10 which is RMX2030EX_11_C.77
so is there anyone here has that steps to root Realme 5i "without" rolling back to android 9? honest answers are appreciated
Click to expand...
Click to collapse
I had the same problem with rmx1911 android 10 realme 5. I do have downloaded the android 10 vbmeta.img for my realme 5 android 10. You to download the latest firmware from realme website and extract the vbmeta.img or find that file from internet. After that do following:
Note: I am not responsible for any data loss or brick. Do it at your own risk
1. Download in-depth and apply for unlock bootloader.
2. Switch the USB-Debugging and OEM Unlock on from Developer Option.
3. Download & Setup adb Fastboot tools/Platform tools
4. Download and Extract twrp.img and vbmeta.img [Must rename TWRPx.x.x.img to twrp.img] file In Platform tools Folder.
4. Open the command prompt in Platform tools Folder.
Put following commands:
adb devices
5. Now check the screen and allow to access.
Then give the following command:
adb reboot bootloader
fastboot flashing unlock
6. Check the screen and Unlock the bootloader.
2.flash the TWRP (your model) and vbmeta.img using following command:
fastboot flash recovery twrp.img
fastboot flash vbmeta vbemta.img
Now you can flash magisk module using TWRP and root your phone easily. Also you can flash custom roms. Thanks me later.
Thanks me later
Daftskrillpunk said:
I am running the latest version of realme 5i android 10 which is RMX2030EX_11_C.77
so is there anyone here has that steps to root Realme 5i "without" rolling back to android 9? honest answers are appreciated
Click to expand...
Click to collapse
Redmi note 11 4GI have Redmi note 11 4G stuck in recovery mode ( NV DATA Corrupted ) android v 13.0.1 and unlocked bootloader my problem :
- if I can install ENGROM to repair imei. (I try with cm2 MTK dongle box but after rebooting it seam error NV DATA Corrupted.
- I try to install ENGROM but it doesn't accept.
Can you help me if there are solution without opening the back cover of the phone.
https://xiaomifirmwareupdater.com/archive/miui/selenes
https://xiaomifirmwareupdater.com/archive/miui/selene
https://androidmtk.com/use-sn-write-tool
https://github.com/bkerler/mtkclient
aIecxs said:
https://xiaomifirmwareupdater.com/archive/miui/selenes
https://xiaomifirmwareupdater.com/archive/miui/selene
https://androidmtk.com/use-sn-write-tool
https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
can i install ENGrom or not, and how I can use this tool plz
if bootloader is unlocked, download fastboot ROM, extract with 7-Zip, connect device in fastboot mode and execute flash_all.bat from cmd.exe
make sure platform-tools is in path, Android Bootloader Interface drivers installed, device detected in 'fastboot devices' and directory names contain no whitespaces.