Related
Hi
Recently someone sent me a device from Tecno which is not available in Europe. It is Tecno Pouvoir 4 which comes with 3gb ram 32gb rom, 7 inch screen, Mediatek Helio A22, Android 10.
I take no responsibility for your actions and anyone who is willing to follow this guide should know the consequences as well. If you do not know what you are doing, please do not go ahead with this guide.
This is the method that I have tested and works perfectly!
1.Unlock Bootloader > enable oem unlock , usb debugging after turning on developers options from settings
2. Install drivers, Setup adb and fastboot and type :
Code:
adb devices
check if device is connected properly
Code:
adb reboot bootloader
boot into fastboot
Code:
fastboot devices
check if fastboot device connected properly
Code:
fastboot flashing unlock
Command to unlock bootloader
press volume up key on screen when prompted. Your device will be unlocked and all date will be lost.
3. Next , I used magisk to patch boot.img from stock rom. The size of boot.img reduced to 9Mb from 32Mb.
Copied it from phone and saved it in PC to flash it to device
Code:
fastboot flash boot nameofboot.img
nameofboot.img will be the name of patched boot image you are using.
Next, I flashed patched vbmeta.img which I made with avbtools in python.
Code:
fastboot flash vbmeta vbmeta.img
Code:
fastboot reboot
The device also contained vbmeta_system and vbmeta_vendor which I initially patched as well but after more testing, flashing modified has no effect on the outcome if bootloader is unlocked.
FILES HERE
Please use the files from folder "FIles Used" which contains
a. vbmeta_disabled_unsigned > This is vbmeta.img
b. magisk_patched_flashed > this is boot.img
vbmeta_disabled_unsigned should work with any future versions as well.
Make sure you have same stock rom version as listed above if you are going ahead with flashing. These files are from "LC7-H6116BCF-Q-GL-200612V304_Signed"
I have also found a full stock rom to recover this device online which I am sharing for anyone who faces a bootloop during this procedure.
STOCK ROM HERE
If anyone really needs the root, flash the above stock rom and then use the files in this guide.
Good Luck!
Anyone who wants more details about patching vbmeta, device partitions or anything about this device , I am more than happy to answer.
I have not been successful to port TWRP for this device yet. As I am not very interested in ROM development or any further development on this device, which needs lots of extensive work, I am not willingly to go ahead with that.
Good evening, what was sent was done and the bootloader was unlocked
But after inserting fastboot flash vbmeta vbmeta.img
Which is vbmeta_disabled_unsigned
The phone no longer works and the tecno logo does not appear or enter the fastboot
please help
oh my My mobile Tecno Pouvoir 4 version LC8 NOT [LC7]
*
send my mail : [emailΒ protected]
or my whatsapp : +966550066306
or my imo : +96655006306
or call me : +96655006306
All,
Were you able to Flash the boot.img? My mobile is Techno Poouvoir 4 and not Pro. Please help me.
Please help with bootable image for Pouvoir 4, not pro. I need the help with rooting.
Hello,
I have a Tecno Spark 4 air (kc6).
I can't find a stock rom. I read that it's possible to "dump" stock rom from a MediaTek Chipset so I can root it, but I don't know how. Can you help me please? thank you
if someone needs help with restoring your smartphone, please contact me directly via telegram, +31685657429
Dear friends, do not tell me about this problem. Once the phone was rooted, but the root is lost. Apparently due to a firmware update. Now it shows this message when loading. Now it's Android 11, with a security update from 03/05/22, HiOS 7.5.0 (OS7.5-R-P31-201030), build LC7-H6116BCF-R-GL-220311V1358.
How to root a phone without losing information? Thank you!
Hello sir,
Any twrp recovery !!!
Hi guys. Is there any root method for the Gigaset Gs4? Thanks.
Anyone?
As long as you have the stock images there is.
Im currently trying to get the stock ROM in any way. If anyone has some tips please reply
Currently I'm trying to get the stock ROM using the image here: https://www.google.com/amp/s/unofficialtwrp.com/download-twrp-3-2-3-mediatek-mt6771-8-1/?amp
I hope that I can extract boot.img with it, to patch it with magisk.
Also take a look here:
Amazing Temp Root for MediaTek ARMv8 [2020-08-24]
Software root method for MediaTek MT67xx, MT816x, and MT817x! So it's no big secret that not too long ago, I found a way to achieve temporary root on MediaTek chipsets. No preinstalled root solution or device unlock was needed. The tool I...
forum.xda-developers.com
Edit: I found another image for the mt6771 that might work as well but keep in mind that it is not made for the Gigaset GS 4: https://www.techswizz.com/twrp-recovery-for-cubot-note-20-pro/ DOES NOT WORK!!
As soon as I got the patched image I think you can use this bypass to flash it: https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/amp/ DOES NOT WORK!!
StarMiner99 said:
As long as you have the stock images there is.
Im currently trying to get the stock ROM in any way. If anyone has some tips please reply
Currently I'm trying to get the stock ROM using the image here: https://www.google.com/amp/s/unofficialtwrp.com/download-twrp-3-2-3-mediatek-mt6771-8-1/?amp
I hope that I can extract boot.img with it, to patch it with magisk.
Also take a look here:
Amazing Temp Root for MediaTek ARMv8 [2020-08-24]
Software root method for MediaTek MT67xx, MT816x, and MT817x! So it's no big secret that not too long ago, I found a way to achieve temporary root on MediaTek chipsets. No preinstalled root solution or device unlock was needed. The tool I...
forum.xda-developers.com
Edit: I found another image for the mt6771 that might work as well but keep in mind that it is not made for the Gigaset GS 4: https://www.techswizz.com/twrp-recovery-for-cubot-note-20-pro/
As soon as I got the patched image I think you can use this bypass to flash it: https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/amp/
Click to expand...
Click to collapse
i managed to extract the stock boot.img and recovery.img using this guide with some modifications:
How to use Wwr MTK + SP Flash tool to backup Mediatek rom
This is a step-by-step guide on how to use Wwr MTK tool & SP flash tool to backup Mediatek (MTK) firmware. We had previously created guides on how to backup or dump firmware from a Mediatek (MTK) devi
forum.hovatek.com
things i did different:
i could not preform the ram test to determine the size of emmc_user so i just used a random length(0x3a3e00000) later on WwR told me that emmc_user should be: 0xe8f800000 i used this value to again read the emmc_user region and loaded it into WwR and continued on the rutorial.
now with this information we should be able to patch boot.img using magisk and flash it to our devices to root it.
to flash your device do the following: reboot into fastboot mode (power + volume up and select fastboot) then in a terminal type:
to unlock the bootloader:
fastboot flashing unlock
to flash an image to your device:
fastboot flash <partition> <image>
the stock images and the scatter file will follow
I managed to succesfully root my smartphone using magisk there was a single problem which is the following:
Android verified boot
you need to flash a new vbmeta image
i made my own empty vbmeta image and flashed it now its working and my smartphone is rooted
[HOW TO ROOT AND HOW TO INSTALL TWRP]
DISCLAIMER:
I will not be responsible for any damage to you device !!!!
step 1 :
make a backup of your smartphone data
step 2 :
unlock your bootloader
1. go to settings -> about phone -> click a few times on the build number
2. go to settings -> system -> developer options -> allow OEM unlocking
step 3 :
install adb and fastboot on your computer
https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/ <- you can download a minimal version here
step 4 :
enable usb debugging
go to settings -> system -> developer options -> enable usb-debugging
step 5 :
open a console on your computer and do the adb and fastboot stuff
type the following commands into your cmd:
adb reboot bootloader <- this will reboot your smartphone into fastboot mode
wait until your phone enters fastboot mode
as soon as your phone entered fastboot mode type the following:
fastboot flashing unlock <- this will unlock your bootloader you have to press volume up to confirm it
then flash vbmeta and magisk patched:
fastboot flash vbmeta vbmeta_disabled.img <- this will flash the new vbmeta file
[ROOT]
fastboot flash boot magisk_patched-23000_tvNQq.img <- this will flash the new boot image
[TWRP]
fastboot flash recovery twrp.img <- this will flash the new recovery image
step 6 :
reboot your phone and reconfigure it
Youre Done!
EDIT: please download the twrp image from the official TWRP site: https://twrp.me/gigaset/gigasetgs4.html
@StarMiner99 as I'm thinking about buying it I'm glad to know it can be rooted.
bmwdroid said:
@StarMiner99 as I'm thinking about buying it I'm glad to know it can be root
Click to expand...
Click to collapse
well it was not easy to get the stock images xD
im currently also trying to port lineage os and twrp to the gigaset gs4
StarMiner99 said:
im currently also trying to port lineage os and twrp to the gigaset gs4
Click to expand...
Click to collapse
That's good to hear.
Although if it can be rooted it might be sufficient for me to kill all not needed apps via adb and use Magisk for AFWall+.
Actually I've read about the possibility of a GS version with a better camera so I might wait a while before getting one.
well there arent any unneeded apps
[STOCK ROM + SCATTER FILES + PRELOADER]
here are the stock rom files, the scatter file and the preloader in a zip archive
1.5 GB file on MEGA
mega.nz
StarMiner99 said:
[STOCK ROM + SCATTER FILES + PRELOADER]
here are the stock rom files, the scatter file and the preloader in a zip archive
1.5 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
Hey StarMiner99, is the ADUPS software updating malware in the image you uploaed still working? Could hyou please explain briefly how to flash this stock rom? I have adb and fastboot already running and a rooted device too.
Thanks a lot!
StarMiner99 said:
im currently also trying to port lineage os and twrp to the gigaset gs4
Click to expand...
Click to collapse
any progress on this?
could i do something to help?
First of all: Thank you very much! Everything has worked so far and the device is rooted.
But I still have one question. How does the device behave when the official updates from Gigaset are installed via OTA? The GS4 reports it would have security updates. Can I install them without losing root privileges? Does anyone already have experience? Thanks in advance!
UserSven said:
First of all: Thank you very much! Everything has worked so far and the device is rooted.
But I still have one question. How does the device behave when the official updates from Gigaset are installed via OTA? The GS4 reports it would have security updates. Can I install them without losing root privileges? Does anyone already have experience? Thanks in advance!
Click to expand...
Click to collapse
I have now simply installed the June 2021 update. The good news: It worked. The slightly less good news is that you have to flash the images again. But flashing also works with the latest version and the update check tells that there are no new updates. So it seems to work.
UserSven said:
I have now simply installed the June 2021 update. The good news: It worked. The slightly less good news is that you have to flash the images again. But flashing also works with the latest version and the update check tells that there are no new updates. So it seems to work.
Click to expand...
Click to collapse
Which recovery do you use?
I've read in their forum that updating doesn't work when on TWRP.
StarMiner99 said:
im currently also trying to port lineage os and twrp to the gigaset gs4
Click to expand...
Click to collapse
Why are you not just using the LineageOS GSI?
I have LineageOS17.1 running on my GS4 since Feb. without any issues so far.
ChrisMucDev said:
Why are you not just using the LineageOS GSI?
I have LineageOS17.1 running on my GS4 since Feb. without any issues so far.
Click to expand...
Click to collapse
Is there a tutorial on how to do that?
Wolfgang-Z said:
Is there a tutorial on how to do that?
Click to expand...
Click to collapse
Here is, what I did: (on your own risk)
As far as i can remember, i did not have any issues.
Step 1: Unlock your device
1. Enable Developer Options: Tap 10x on Build-Number (Setttings -> About the phone -> Build-Number)
2. Enable Bootloader Unlocking -> activate OEM-Unlock option (Settings -> System -> (More) -> Developer-Options)
3. Enable ADB Access -> Enable USB-Debugging / ADB (Settings -> System -> (More) -> Developer-Options)
4. (Set USB-Settings (Message-Center) from "No tx" to "PTP")
5. Connect phone to usb port, grant permissions on phone and check connection with `adb devices`
6. Boot to bootloader: `adb reboot bootloader`
7. Unlock Bootloader: `fastboot flashing unlock`
Step 2: Download GSI
1. Reboot your phone and install Treble Info App
(https://play.google.com/store/apps/details?id=tk.hack5.treblecheck&hl=en&gl=US)
GS4 should support AB-Partitions
2. Download GSI: https://sourceforge.net/projects/andyyan-gsi/files/
For GS4: treble_arm64_bv*
Step 3: Install GSI
1. Boot to recovery: `adb reboot recovery` or Volume Down + Power
2. Wipe data
3. Wipe cache
4. Enter fastboot
5. Flash GSI: `fastboot flash system <extracted-gsi-image>`
6. Reboot and enjoy
*. (just in case it does not boot, reboot to recovery -> enter fastboot and flash vbmeta: `fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img`)
This vbmeta-image should work (see post #6): https://forum.xda-developers.com/attachments/vbmeta_disabled-img.5325563/
This is for POCO F1 users who have softbricked their phones and now stuck on Oreo. If they flash any other rom it will simply go to fastboot rather than booting. Just follow the below steps to fix yours.
Step 1 : Root your Oreo rom using magisk.
Step 2 : Boot into rom and install Lanthanum System toolbox
Step 3 : Open the app and give root privileges
Step 4 : Go to menu and scroll to partion settings
Step 5 : Scroll to dtbo
Step 6 : Click on it and select flash
Step 7 : Select the dtbo.img attached and flash it. ( If you get trouble while selecting or if it's crashing select from another file explorer.)
Step 8 : Reboot and then you can flash any rom like you used to.
Thanks a lot mate ! It Worked
bro im not able to install aex 8.0 A11 please help me
Fall3nSama3l said:
This is for POCO F1 users who have softbricked their phones and now stuck on Oreo. If they flash any other rom it will simply go to fastboot rather than booting. Just follow the below steps to fix yours.
Step 1 : Root your Oreo rom using magisk.
Step 2 : Boot into rom and install Lanthanum System toolbox
Step 3 : Open the app and give root privileges
Step 4 : Go to menu and scroll to partion settings
Step 5 : Scroll to dtbo
Step 6 : Click on it and select flash
Step 7 : Select the dtbo.img attached and flash it. ( If you get trouble while selecting or if it's crashing select from another file explorer.)
Step 8 : Reboot and then you can flash any rom like you used to.
Click to expand...
Click to collapse
thank you so much bro finally im able to install a custom rom . i installed dtbo.img by fastboot method
Babu4886 said:
thank you so much bro finally im able to install a custom rom . i installed dtbo.img by fastboot method
Click to expand...
Click to collapse
How?
rdjaat said:
How?
Click to expand...
Click to collapse
Just flash through fastboot command "fastboot flash dtbo dtbo.img" simple. You don't need to first flash Oreo rom or root device .I simply flashed it by fastboot and then installed twrp then flashed a custom rom corvus os 10.5
Babu4886 said:
Which firmware are u using
Click to expand...
Click to collapse
Corvus os
Babu4886 said:
Corvus os
Click to expand...
Click to collapse
bro i did the same my phone was stuck on permanent fastboot but when i try to flash miui 12.0.3 ofiicial through twrp or mi flash tool error comes which never did and i want to go to stock rom as i need to sell my phone
Previously my cellphone was in a custom ROM, I installed a module that used dtbo in it, while my cellphone didn't support it, finally my cellphone could live with the MIUI ROM
10 android 8(oreo), can I use the method above to use a custom rom again?
PanjiAja03 said:
Previously my cellphone was in a custom ROM, I installed a module that used dtbo in it, while my cellphone didn't support it, finally my cellphone could live with the MIUI ROM
10 android 8(oreo), can I use the method above to use a custom rom again?
Click to expand...
Click to collapse
https://t.me/poors_i_fone/165994 Here Download this dtbo.img
Download platform tools if using windows 7 or higher
open cmd
put phone in fastboot mode
type: 'fastboot flash dtbo dtbo.img'
this will fix everything... just reboot device
and make sure you dont end up flashing some trash files for your device... and fix this issue via edl or paying to xyz people. stay safe!
lakshhhhhh said:
https://t.me/poors_i_fone/165994 Here Download this dtbo.img
Download platform tools if using windows 7 or higher
open cmd
put phone in fastboot mode
type: 'fastboot flash dtbo dtbo.img'
this will fix everything... just reboot device
and make sure you dont end up flashing some trash files for your device... and fix this issue via edl or paying to xyz people. stay safe!
Click to expand...
Click to collapse
is it possible to flash the dtbo.img file after flashing the twrp and install the custom rom?
PanjiAja03 said:
is it possible to flash the dtbo.img file after flashing the twrp and install the custom rom?
Click to expand...
Click to collapse
bro is your phone stuck on fastboot completely?? dm me at telegram
π£π₯ππππ§π’π₯ π’π¦β’ | π£π’ππ’ π1
π₯PREDATOR OS = GAMING + BBπ₯ #POCO F1 (Beryllium) CUSTOM ROMS (MODS + PORT) Got Banned Join - @SorryIDidWrong Join Our Official Channel @predators_hotlist For Logs Join @logs_of_poors_i_fone
t.me
Hello everyone hope you are all keeping well.
Here is a little guide on how to Unlock/Lock the Bootloader and Root/Unroot our Nord2T.
I cannot be responsible if you brick your device. Your phone, your choices, your responsibility!β
Unlock The Bootloader;β
If you haven't done it already...beware that this will erase all of your user data. To do so, you must:
Enable developer options
Enable the "OEM unlocking" option
Enable USB debugging
Have both adb and fastboot, from SDK Platform Tools available on your PC
Connect your phone to your PC using the USB cable and run the following commands:
Code:
adb devices
(just to make sure that your phone is, in fact, recognized by your PC and that you're able to run adb commands)
Code:
adb reboot bootloader
(so your phone will reboot into fastboot mode)
Code:
fastboot flashing unlock
(device should now unlock)
Code:
fastboot reboot
(device reboots with an unlocked bootloader and data partition wiped so set up the device from scratch again)
Rooting Guide;β
Unlocking the Bootloader is necessary before continuing
1 - Download Nord2T stock boot.img that you may find later on this post, that matches your current build.
Copy the boot.img to your devices internal memory
Leave a copy of it on your PC (on the same folder you have adb and fastboot...you never know if you will need to use it again in the future...to restore the stock boot.img, aka revert to stock...)
Spoiler: Global Build boot.img's
Stock boot CPH2399_11_A.07 (did not extract it and can't find the firmware file to be able to download and extract, if someone could please upload a link to it on this thread I would sincerely appreciate it)
Stock Boot CPH2399_11_A.09
Stock Boot CPH2399_11_A.11
Stock Boot CPH2399_11_A.14
Stock Boot CPH2399_11_A.15
Stock Boot CPH2399_11_A.16
Stock Boot CPH2399_11_A.17
Stock Boot CPH2399_11_A.19
Stock Boot CPH2399_11_C.24
Stock Boot CPH2399_11_C.26
Stock Boot CPH2399_11_C.27
Spoiler: IND Build boot.img's
Stock Boot CPH2401_11_A.11
Stock Boot CPH2401_11_A.13
Stock Boot CPH2401_11_A.14
Stock Boot CPH2401_11_A.15
Stock Boot CPH2401_11_A.16
Stock Boot CPH2401_11_A.17
Stock Boot CPH2401_11_A.18
Stock Boot CPH2401_11_A.19 (I didn't capture the download for this, if anyone has it please send me a link to the official OTA)
Stock Boot CPH2401_11_C.23
Stock Boot CPH2401_11_C.24
Stock Boot CPH2401_11_C.26
Stock Boot CPH2401_11_C.27
2 - Download latest Magisk Manager from HERE and install it on your phone
3 - Open Magisk Manager App and press:
Install
Select and Patch a File
Browse to the path where you saved stock boot.img and select it
Magisk Manager will now patch the boot image and store it in [Internal Storage]/Download/magisk_patched.img
4 - Copy the patched boot image from your device to your PC (Store it on the same folder where you have adb and fastboot)
5 - Flash the patched boot image to your phone by running these commands (remember, you must have patched boot image on the same folder you have adb and fastboot and, of course, your device must be connected to your PC...)
Code:
adb reboot bootloader
β
Code:
fastboot flash boot magisk_patched.img
β
Code:
fastboot reboot
β6 - After the phone boots up, hopefully with a normal boot (almost feels like nothing happened....), install/open Magisk Manager App again and watch Magisk doing it's magic!
7 - Enjoy!
All credits goes to topjohnwu and his incredible work with Magisk.
System Updates;β
For system updates. Just apply the OTA update as normal.
Once updated you will have no root and you must follow steps above again with the new boot.img that corresponds to the firmware version you are on.
Unroot;β
To unroot simply flash the stock boot.img.
Relock Bootloader;β
If you have TWRP installed flash the stock boot.img (same as your firmware version from earlier in this post)
This is so as you can access fastboot properly.
1 - To relock Bootloader first download Oxygen Updater app from the Playstore.
2 - Download the firmware which corresponds to the firmware which you have currently installed.
3 - Move/copy this firmware.zip to your PC and extract it. (inside you will see a folder and a couple files. The only file we need is payload.bin)
4 - Download/install Fastboot Enhance on your PC
5 - Reboot phone to bootloader mode so it gets detected by Fastboot Enhance, from there boot to fatsbootd.
6 - Flash payload.bin in Fastboot Enhance
7 - Wipe data in fastbootd from your Nord 2T, reboot and finish phone setup.
8 - Enable developer options, enable USB debugging from developer options.
9 - Reboot to bootloader and run the command;
Code:
fastboot flashing lock
The device will be now successfully locked.
Hope this helps out
Thank you so much
Thanks so much. Going to try this weekend with my daughter phone.
Thanks a lot!
There is a new update available for Nord 2T:
CPH2399_11_A.11
Do you have the stock boot.img for this version by any chance?
jolaviska said:
Thanks a lot!
There is a new update available for Nord 2T:
CPH2399_11_A.11
Do you have the stock boot.img for this version by any chance?
Click to expand...
Click to collapse
No I still haven't received the ota. Did you get updated to this version already?
I received the update but refusing to apply it
jolaviska said:
I received the update but refusing to apply it
Click to expand...
Click to collapse
It will show up again.
Don't worry.
Rooted my Nord 2T successfully. Thanks once again
Download Nord2T stock boot.img
Click to expand...
Click to collapse
I was wondering... How can I extract the boot.img by myself without relying upon anyone? With the oxygen updater app I've the full firmware (~4 GB), would that be useful to extract the boot.img?
luke! said:
I was wondering... How can I extract the boot.img by myself without relying upon anyone? With the oxygen updater app I've the full firmware (~4 GB), would that be useful to extract the boot.img?
Click to expand...
Click to collapse
By using THIS software. I will always update this thread with the latest boot.img files in the future but this is the software I used
Thank you.
And what is the procedure to OTA update, once we have magisk_patched_boot.img installed.
OTA won't install, so need to revert somehow install new update and root again?
garylawwd this device is prone to bricking if you patch the inactive slot after an OTA within the Magisk app as I experienced first hand. I have never had such issues with my Redmi K40 Gaming despite their similarity with the MediaTek processor. After an OTA I would simply patch the inactive slot, reboot and enjoy permanent root.. topjohnwu made rooting simple for us...
Stock Global boot CPH2399_11_A.11 added to OP. Sorry for the delay, only received the update today
nielsync said:
garylawwd this device is prone to bricking if you patch the inactive slot after an OTA within the Magisk app as I experienced first hand. I have never had such issues with my Redmi K40 Gaming despite their similarity with the MediaTek processor. After an OTA I would simply patch the inactive slot, reboot and enjoy permanent root.. topjohnwu made rooting simple for us...
Click to expand...
Click to collapse
Ya I didnt do it this way at all because my device updated while i was asleep and i was unrooted, so I had to patch the new boot using the method in the OP.
I would definitely advise restoring the stock boot.img before proceeding with an update, then install the update normally and just patch the new image with magisk and then flash.
For a while the 'install to inactive slot' option only works on certain devices, the Nord 2T obviously is'nt one of those devices.
I'm sure the magisk documentation recommends restoring stock images before an update.
Thanks for the Stock Boot CPH2399_11_A.11, could you please also link the related img patched?
On my first Nord I have always updated with the patched boot img on it without problem, but I was on old Oxigen OS 11, not the 12 Oxigen (color) os...
cioce said:
Thanks for the Stock Boot CPH2399_11_A.11, could you please also link the related img patched?
On my first Nord I have always updated with the patched boot img on it without problem, but I was on old Oxigen OS 11, not the 12 Oxigen (color) os...
Click to expand...
Click to collapse
I didn't want to share any of the magisk images because there is a new version of magisk every other week and people may like to be on the beta branch or canary branch of magisk or whatever.
It's very easy to patch the image though. Just download magisk.apk and use it to patch the boot.img's I've provided above. Then move the patched.img to your pc and flash.
But anyways here is the magisk patched.img for CPH2399_11_A.11 using magisk 25.2 stable
Stock Boot for Indian variant CPH2401_11_A.13 added to OP
can u post the latest update boot.img for indian unit CPH2401_11_A.14
Stock boot for Indian CPH2401_11_A.14 added to OP
Stock boot for Global CPH2399_11_A.14 added to OP
hi, I wanted flash a custom rom in my Redmi Note 11 Pro+ which is not the 5g model but I accidently flash an another vendor_boot from a other model and he stuck in Fastboot mode. when I execute the adb devices the phone is not detected by adb but when fastboot devices, the devices is now detected. I tried to flash stock rom but nothing happens.
I had a similar problem last week and I solved it yesterday. Commands did nothing but Xiaomi's flash tool did. :
Go to http://new.c.mi.com/global/miuidownload/detail/guide/1
Click on the fastboot tab
Download the MIUI ROM Flashing Tool (step 1)
Download your ROM (step 2). If you bought your phone in Europe, it's the EEA version. Otherwise I suspect you need the Global one.
Unzip the files into their own folders
Open the MIUI ROM Flashing Tool
Paste the path of your ROM folder in the tool
Click refresh
Click flash
It will then take about 12 minutes to flash