stuck in fastboot after GSI, ARB error? - Xiaomi Mi 10 Pro Questions & Answers

Hello,
i flashed BLISS GSI onto my mi 10 pro,, into super partition.
No error, but after rebot stuck in fastboot
can execute fastboot flash recovery twrp.img
flashing correctly
fastboot reboot get me back to fastboot
downloaded stock miui 12 global fastboot file, extracted, connected the cmi
device is detected, flash..
flash started and now i get arb error?
mi 10 pro doesnt have ARB as far as i know?
i tried several miflash versions, till miflash 20200314
Anybody can help me recover

marcel112 said:
Hello,
i flashed BLISS GSI onto my mi 10 pro,, into super partition.
No error, but after rebot stuck in fastboot
can execute fastboot flash recovery twrp.img
flashing correctly
fastboot reboot get me back to fastboot
downloaded stock miui 12 global fastboot file, extracted, connected the cmi
device is detected, flash..
flash started and now i get arb error?
mi 10 pro doesnt have ARB as far as i know?
i tried several miflash versions, till miflash 20200314
Anybody can help me recover
Click to expand...
Click to collapse
Don't to use miflash
Just unzip the rom file
Open folder
Connect to fastboot
Use flash all. The Windows batch file
Rom will be successfully flashing and booting

rowihel2012 said:
Don't to use miflash
Just unzip the rom file
Open folder
Connect to fastboot
Use flash all. The Windows batch file
Rom will be successfully flashing and booting
Click to expand...
Click to collapse
so i connect the phone, recornized but pc.
i go to fastboot in the correct folder where the files are and the...?

marcel112 said:
so i connect the phone, recornized but pc.
i go to fastboot in the correct folder where the files are and the...?
Click to expand...
Click to collapse
You format after flashing bliss?

james1089 said:
You format after flashing bliss?
Click to expand...
Click to collapse
No, i think that was the mistake.
I got the phone back up again, with help from other mi 10 pro user on telegram.
The fault was that i didnt put my images file and folder in the root of c drive
after that all good :victory:

marcel112 said:
No, i think that was the mistake.
I got the phone back up again, with help from other mi 10 pro user on telegram.
The fault was that i didnt put my images file and folder in the root of c drive
after that all good :victory:
Click to expand...
Click to collapse
Same Issue here how did you fixed it?

like i said. make adb in the root off c drive.
also put the fastboot rom in the c root. then miflash will recornize the fastboot rom without errors

{Mod edit: Quoted post has been deleted}
Was already up off course .. was 9 months ago. Used other cable , other port and flashed from c root

Related

How to recover from bootloader relock brick

Hello,
I have MIX 3 Chinese version, unlocked bootloader, flashed latest global. Fine
For security purposes, tried to lock bootloader with fastboot - I knew it may be risky- now the device is in Mi recovery 3, refused to reboot even after erase data.
How to bring it back to life.
Thanks
Use the XiaoMiTool V2.
Google it
Can you enter fastboot mode?, If yes use mi flash and flash original chinese rom.
GVN.Gallus said:
Can you enter fastboot mode?, If yes use mi flash and flash original chinese rom.
Click to expand...
Click to collapse
Yes I can enter fastboot. Even I check bootloader status now locked.
Could you refer a link where all the process is explained? I am not conversant with mi flash.
visit https://www.xiaomitool.com/V2/ and good luck
Nakbleu said:
Yes I can enter fastboot. Even I check bootloader status now locked.
Could you refer a link where all the process is explained? I am not conversant with mi flash.
Click to expand...
Click to collapse
Follow instruction here, make sure to download lastest Miflash and correct rom, for fastboot rom use mifirm.net
grandman1701 said:
visit https://www.xiaomitool.com/V2/ and good luck
Click to expand...
Click to collapse
XiaoMiTool V2 won't be able to unbrick your device in the cases "This MIUI Version can't be installed on this device" error
Nakbleu said:
Yes I can enter fastboot. Even I check bootloader status now locked.
Could you refer a link where all the process is explained? I am not conversant with mi flash.
Click to expand...
Click to collapse
Fastboot is fairly simple. Download the latest Chinese from from miui.com, unzip it, connect your device in fastboot mode, and run the flash_all.bat file. It will take a while and the command prompt window will close when it is finished and your device will reboot.
jcsww said:
Fastboot is fairly simple. Download the latest Chinese from from miui.com, unzip it, connect your device in fastboot mode, and run the flash_all.bat file. It will take a while and the command prompt window will close when it is finished and your device will reboot.
Click to expand...
Click to collapse
I am downloading the ROM.
Please can provide step by step instructions?
My understanding is to:
1. copy the rom in minimal fastboot directory
2. unzip all files in that same directory (or should I create new one?)
3. Execute the command below:
fastboot flash_all.bat
By the way, can I use fastboot with locked bootloader?
Thanks again
Nakbleu said:
I am downloading the ROM.
Please can provide step by step instructions?
My understanding is to:
1. copy the rom in minimal fastboot directory
2. unzip all files in that same directory (or should I create new one?)
3. Execute the command below:
fastboot flash_all.bat
By the way, can I use fastboot with locked bootloader?
Thanks again
Click to expand...
Click to collapse
If you have ADB installed system wide, then it doesn't matter where you unzip the full image to. The best way to have ADB installed system wide is through this method.
You don't need to type anything. Just open the folder the ROM was decompressed in, right click the flash_all.bat, and run it as administrator with your device connected in fastboot mode. It will literally do everything else.
jcsww said:
If you have ADB installed system wide, then it doesn't matter where you unzip the full image to. The best way to have ADB installed system wide is through this method.
You don't need to type anything. Just open the folder the ROM was decompressed in, right click the flash_all.bat, and run it as administrator with your device connected in fastboot mode. It will literally do everything else.
Click to expand...
Click to collapse
I unzip the rom using 7zip, but couldn't find flash_all.bat file!
Nakbleu said:
I unzip the rom using 7zip, but couldn't find flash_all.bat file!
Click to expand...
Click to collapse
Did you install ADB 1.4.3 from the thread linked to? Do you have your device connected to a USB 3 port or USB 2 port? Are you using the cable that came with your device to flash it? Were you booted into the bootloader when trying to flash?
Edit: Read that post wrong. You need to download the fastboot version. You can't flash the TWRP image using fastboot.
jcsww said:
Did you install ADB 1.4.3 from the thread linked to? Do you have your device connected to a USB 3 port or USB 2 port? Are you using the cable that came with your device to flash it? Were you booted into the bootloader when trying to flash?
Edit: Read that post wrong. You need to download the fastboot version. You can't flash the TWRP image using fastboot.
Click to expand...
Click to collapse
Yes I did all that.
I am getting error: Erase is not allowed in lock state.
Any workaround please?
re-unlock the device. it's locked right now.
erbsenmatsch said:
re-unlock the device. it's locked right now.
Click to expand...
Click to collapse
Won't be possible with the Mi unlock software as the phones been wiped - no account, no OEM allowed ticked etc.
in that case, your only hope is: sending it back to china
where did you buy it?
erbsenmatsch said:
in that case, your only hope is: sending it back to china
where did you buy it?
Click to expand...
Click to collapse
In UK. Gray import. I really don't understand why a manufacturer should let this be possible. Why not just make it unlockable with global rom? This will avoid such unwanted situation for everybody. Pissed off by Xiaomi

how to solve antirbpass error on fastboot flashing

I have a violet device.
That device bootloader is unlocked. Then I have try to flash custom recovery, but device can't boot into recovery, not custom & mi recovery.
Now device only showing redmi by xiaomi logo.
Then I have try to flash a latest fastboot rom, but its cannot done showing antirbpass error.
Also I trying to format user data by adb command it's showing my device is f2fs pertition format,it's cannot be done.
Now device only boot into fastboot mode, but not take a fastboot flash, show antirbpass error
How can I solve this issue.
Sorry for my bad English.
Download minimal adb & extract it in c drive & then extract fastboot into same folder then connect your phone to pc in fastboot mode & go to that folder & double click clean all.bat & wait for it to finish & you will boot to rom & unbrick your phone 100% tested by me
M.A. Kaium said:
I have a violet device.
That device bootloader is unlocked. Then I have try to flash custom recovery, but device can't boot into recovery, not custom & mi recovery.
Now device only showing redmi by xiaomi logo.
Then I have try to flash a latest fastboot rom, but its cannot done showing antirbpass error.
Also I trying to format user data by adb command it's showing my device is f2fs pertition format,it's cannot be done.
Now device only boot into fastboot mode, but not take a fastboot flash, show antirbpass error
How can I solve this issue.
Sorry for my bad English.
Click to expand...
Click to collapse
Please post this in the questions sub forum...this is not the place..
navi_58861170 said:
Download minimal adb & extract it in c drive & then extract fastboot into same folder then connect your phone to pc in fastboot mode & go to that folder & double click clean all.bat & wait for it to finish & you will boot to rom & unbrick your phone 100% tested by me
Click to expand...
Click to collapse
I have platform tools from.which i used to flash recovery etc. Should i copy the fastboot rom files in platform tools and click on flash all.bat because there is no .bat file of clean all.
Sent from my Redmi Note 7 Pro using XDA Labs
navi_58861170 said:
Download minimal adb & extract it in c drive & then extract fastboot into same folder then connect your phone to pc in fastboot mode & go to that folder & double click clean all.bat & wait for it to finish & you will boot to rom & unbrick your phone 100% tested by me
Click to expand...
Click to collapse
where i can download minimal adb ? I have the same problem.... thank.
https://forum.xda-developers.com/showthread.php?t=2588979
antibrpass error
joke19 said:
https://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
good morning, my xiaomi redmi note 7 lew I did bootloader unlock and install the recovery "twrp", install a custom rom viperos, after it restarted it stayed in the redmi logo, I tried to install other rom via recovey and it doesn't recognize me zip, I managed install the crDroid but it stays in the startup logo, I tried to flash with xiaomi miflash tool and I get the error of flash anti-pass error and I can't get my RN7 back to life, who can help me thank you from now on.
Thank you
Which twrp? I hope orange fox
---------- Post added at 12:28 PM ---------- Previous post was at 12:24 PM ----------
Wipe system, data and cache.
Then flash the last firmware. Is ur choice Chinese beta or global.
After it ur rom, maybe a customer kernel, gapps and maybe magisk.
She first start need time and by havoc by me my phone reboot short by the first loading.
And every time u play with ur software, u must look for ur battery.
Hope it helps
Miui is not my.
thank
thanks, I managed to roll a custom rom, but I wanted to use another rom and in the recovery it gives invalid zip file format and it doesn't let me install, but at least I recovered the phone. now see how I do to install my rom viperos :good:
bro ur a ****ing genuis i spent like 6 hours trying various custom roms and trying all stock roms to fix this issue . love u finally my phone is working bro .

Fastboot, ADB and MiFlash don't recognize device

hello guys,
I wanted to do a clean flash of my poco f2 pro. Installed MiFlash, put the device in fastboot mode (it got recognized) and then klicked flash. the device immediately disappered from miflash and nothing was flashed. I can still boot into rom (Evolution X 4.7) but I have following symptoms:
1. Wifi does not work anymore
2. ADB, Fastboot and MiFlash do not recognize the device
3. TWRP (Chinese One) does not ask for unlock code and shows no sdcard contents (but Its there bc I can boot normally with data) --> DATA Partiton is not found.
4. TWRP Nandroid Backup is gone
I tried multiple Computers, Cables and ADB`s... What is the problem?
Could it be a faulty partition? Which one?
Please help me
Which version of Miflash?
NOSS8 said:
Which version of Miflash?
Click to expand...
Click to collapse
newest (20181115)
is the phone boot in fastboot?
check drivers in miflash.
NOSS8 said:
is the phone boot in fastboot?
check drivers in miflash.
Click to expand...
Click to collapse
Phone does boot in fastboot. It just does not get recognised by MiFlash
What happens when you press power and volume + or volume -?
NOSS8 said:
What happens when you press power and volume + or volume -?
Click to expand...
Click to collapse
Boots into Fastboot/TWRP. I did a full reset in twrp now and pushed a rom over via mounting and flashed it. hopefully it works...
Remenber TWRP backup does not work
NOSS8 said:
Remenber TWRP backup does not work
Click to expand...
Click to collapse
It just boots endlessly now I think.
Data loss is not important to me. I want fastboot to work
If fastboot work flash with miflah.
NOSS8 said:
If fastboot work flash with miflah.
Click to expand...
Click to collapse
You dont understand....It boots into fastboot but miflash wont show the device!!
is the pc see the device?
try repair in twrp
NOSS8 said:
is the pc see the device?
try repair in twrp
Click to expand...
Click to collapse
does not boot into twrp anymore... only fastboot. and fastboot des not get recognized
Maybe here https://forum.xda-developers.com/t/...ution-on-forums-google-friends.4199267/page-7
NOSS8 said:
Maybe here https://forum.xda-developers.com/t/...ution-on-forums-google-friends.4199267/page-7
Click to expand...
Click to collapse
thank you for your help but I think I am stuck here. No way to connect to fastboot and it does not boot into sth else than fastboot
If adb work try reflash twrp.
Is your phone rooted?
And power +volume -? volume +?
Premaider said:
hello guys,
I wanted to do a clean flash of my poco f2 pro. Installed MiFlash, put the device in fastboot mode (it got recognized) and then klicked flash. the device immediately disappered from miflash and nothing was flashed. I can still boot into rom (Evolution X 4.7) but I have following symptoms:
1. Wifi does not work anymore
2. ADB, Fastboot and MiFlash do not recognize the device
3. TWRP (Chinese One) does not ask for unlock code and shows no sdcard contents (but Its there bc I can boot normally with data) --> DATA Partiton is not found.
4. TWRP Nandroid Backup is gone
I tried multiple Computers, Cables and ADB`s... What is the problem?
Could it be a faulty partition? Which one?
Please help me
Click to expand...
Click to collapse
Hey, I am having the same issue, were you able to find a solution?

"The system has been destroyed" Poco X3 NFC

So I was just messing around with my phone and somehow "destroyed" it. Is it possible to somehow flash it?
xiaomi.eu_multi_POCOX3NFC_V12.0.8.0.QJGMIXM_v12-10
MilanTom said:
So I was just messing around with my phone and somehow "destroyed" it. Is it possible to somehow flash it?
Click to expand...
Click to collapse
Don't worry dude. You can still take your phone to fastboot mode. Download a FASTBOOT rom (*.gz or *.tgz) from mifirm.net then flash it via mi-flash (download from mi-globe). Follow the instructions on mifirm.net
adadwa
ndminhdev said:
Download a FASTBOOT rom (*.gz or *.tgz) from mifirm.net
Click to expand...
Click to collapse
Ok I understand that and I've downloaded the ROM but there is this sentence "1. If Fastboot firmware. The ext. must be tgz. If not. Rename it from .gz to .tgz. Extract it by WinRAR" and also these sentences "ZIP. ZIP ROM using Update function in System or TWRP EU. EU ROM flash using TWRP".
I am just completely lost
To be simple : your flash went wrong probably with a bad rom download or a bad flash method.
If I were you I'd reread the post on installing Xiaomi.eu rom and redownload the whole.
Install OrangeFox recovery with the corresponding thread in the forum and ask if you're still lost
By the way, how did you flash that ROM?
Howell said:
By the way, how did you flash that ROM?
Click to expand...
Click to collapse
Well I started on this site https://magiskmanager.com/#How_to_I...Version_220_on_Android_Custom_Recovery_Option and downloaded the stuff that the site said was needed
And which recovery are you using ?
You should be able to reflash stock and recover your phone using the MiFlash tool.
Download fastboot ROM here, and MiFlash tool here.
And also the problem is, that my phone (Poco X3 NFC) isn't being shown in the MiFlash software. I can access the fastboot screen on my phone and yet it still won't show up
Adb drivers are installed ?
Howell said:
Adb drivers are installed ?
Click to expand...
Click to collapse
Yessir
Howell said:
And which recovery are you using ?
Click to expand...
Click to collapse
I don't know If I even have one, because when I hold Volume + and Power button, nothing happens
MilanTom said:
I don't know If I even have one, because when I hold Volume + and Power button, nothing happens
Click to expand...
Click to collapse
But I am pretty sure I tried to install TWRP Recovery
Mate that's just caused by something going wrong. The only times I get that message is the times I have tried to flash a GSI.
I don't know if you can with this unit?
I've fixed that about 5 times with miflash or miflashpro.
Do you have miflash?
It forces a reformat of Miui recovery rom an then you can start again. Just pay close attention to the bottom right hand corner an make sure it is off default. Default is 'relock bootloader'.
MilanTom said:
So I was just messing around with my phone and somehow "destroyed" it. Is it possible to somehow flash it?
Click to expand...
Click to collapse
If drivers are installed an
Howell said:
Adb drivers are installed ?
Click to expand...
Click to collapse
everything is up an running you should be able to get it into fastboot mode (picture of little rabbit fixing his android) an use miflash to reformat an force a flash of miui recovery rom.
I had that happen once with me an it turned out it was my type c cable. Pulled it out an plugged in a wala. PC could connect with my Poco
Bryceicle1971 said:
I had that happen once with me an it turned out it was my type c cable. Pulled it out an plugged in a wala. PC could connect with my Poco
Click to expand...
Click to collapse
The problem is that my computer can't find my phone. Nothing happens when I plug in the USB-C Cable. It doesn't work on the Fastboot screen nor does it work on "the System has been destroyed" screen. I am pretty sure I downloaded the neeeden drivers. And also, the phone was being found/recognized in the working state.
You need to extract then extract again. You double extract with a fastboot image. Then in miflash you find where you extracted that image to. Then hit refresh in miflash an your device should show in miflash. Miflash can be a tricky beast till you have practiced using it a few times
Hi. If you haven't fixed it yet you can try this: Download stock ROM from here (make sure it's the right one for your device!), choose Recovery ROM download link. Put it in your ADB folder. Do the same with recovery. Download this version of recovery as well. Enter fastboot mode on your device and connect it to your PC. Make sure it's detected. If not, try a different USB port on your computer. Open ADB using Open CMD.bat file in ADB folder.
Type in:
fastboot flash recovery OrangeFox-R11.0_6_Alpha-Unofficial-surya.img (hit Enter)
Type in:
fastboot reboot recovery
You should now be able to access your device internal storage from your PC. Copy the downloaded ROM file and OrangeFox-R11-Unofficial-Beta-surya-10-01.zip to your phone (put them in "Download" folder so they're easy to find).
Using Orange Fox recovery file manager find OrangeFox-R11-Unofficial-Beta-surya-10-01.zip and flash it then REBOOT TO RECOVERY.
Using Orange Fox recovery file manager find your ROM file and flash it. Do not reboot! Hit BACK and choose WIPE in Orange Fox menu (Trashcan icon, second from the right) and switch to Format Data at the top. Read the instructions and follow them by typing YES. Reboot to system. You should now have a working device with a clean stock ROM and a custom recovery installed and keep messing around with it
MocnePifko said:
Put it in your ADB folder.
Click to expand...
Click to collapse
Just two more question.
Where does one get the ADB folder? I may have downloaded a few but I don't know if those were good/correct for my device.
And what can I do when the device is not being detected by my computer? Like should I download and install some new drivers?
But can you reach the fastboot splash in your phone?

Question [SOLVED] Soft Bricked device stuck in boot loop, only fastboot working. No TWRP. MiFlash does not work. How can I fix this mess?

Solution: I hardbricked my device because of my dumbness. This device is not veux... It s viva. Be cautious my friends...
I unlocked my bootloader and wanted to install TWRP to flash a custom ROM to the device. Unfortunately, right after I tried, device got stuck in a bootloop (Mi logo showing, then closing.)
I tried flashing multiple TWRP files after that. Since there is no official file for this device, I tried the ones given in the forum and a youtube video.
Holding power+up does not open anything. Holding power+down I can go to fastboot. ADB does not see the device (adb devices does not show anything). But fastboot devices does show. (MiFlash tool also sees the device but can't flash the ROM.)
MiFlash first gives the classic crc error, I delete the lines, it passes this error and finally gives another error ("Command failed"). I tried flashing 2 versions (my local version and eu version) of the stock rom in both windows and ubuntu based linux. What am I doing wrong?
Am I doomed? What can be done? Why isn't ADB working? Thank you for replies
turbotales said:
I unlocked my bootloader and wanted to install TWRP to flash a custom ROM to the device. Unfortunately, right after I tried, device got stuck in a bootloop (Mi logo showing, then closing.)
I tried flashing multiple TWRP files after that. Since there is no official file for this device, I tried the ones given in the forum and a youtube video.
Holding power+up does not open anything. Holding power+down I can go to fastboot. ADB does not see the device (adb devices does not show anything). But fastboot devices does show. (MiFlash tool also sees the device but can't flash the ROM.)
MiFlash first gives the classic crc error, I delete the lines, it passes this error and finally gives another error ("Command failed"). I tried flashing 2 versions (my local version and eu version) of the stock rom in both windows and ubuntu based linux. What am I doing wrong?
Am I doomed? What can be done? Why isn't ADB working? Thank you for replies
Click to expand...
Click to collapse
ABD works only if you have enabled USB debugging.
Eventually check here that everything is correct:
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Or try to install a Xiaomi Eu rom (Fastboot).
Extract the zip then run the scrip in the corresponding extracted folder to your O.S.
Fastboot_first install.
xiaomi.eu_multi_VEUX_V13.0.3.0.SKCCNXM_v13-12-fastboot.zip
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
NOSS8 said:
ABD works only if you have enabled USB debugging.
Eventually check here that everything is correct:
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Or try to install a Xiaomi Eu rom (Fastboot).
Extract the zip then run the scrip in the corresponding extracted folder to your O.S.
Fastboot_first install.
xiaomi.eu_multi_VEUX_V13.0.3.0.SKCCNXM_v13-12-fastboot.zip
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
Click to expand...
Click to collapse
Hello, I do have my bootloader unlocked and USB debugger is also on.
I tried flashing twrp again, says it worked but does not boot into it. Goes back to boot loop
Then I tried flashing with MiFlash again. Same error
fastboot error remote: command failed
When I google it everyone says my bootloader should be locked. But it is not.
Can I use the hard brick solution with bypass for this problem?
turbotales said:
Hello, I do have my bootloader unlocked and USB debugger is also on.
I tried flashing twrp again, says it worked but does not boot into it. Goes back to boot loop
Then I tried flashing with MiFlash again. Same error
fastboot error remote: command failed
When I google it everyone says my bootloader should be locked. But it is not.
Can I use the hard brick solution with bypass for this problem?
Click to expand...
Click to collapse
All these procedures, Miflash, Twrp, Xiaomi Eu rom are done in Fastboot mode not ADB and obviously the bootloader must be unlocked.
Try the Xiaomi Eu rom.(TWRP included).
NOSS8 said:
All these procedures, Miflash, Twrp, Xiaomi Eu rom are done in Fastboot mode not ADB and obviously the bootloader must be unlocked.
Try the Xiaomi Eu rom.(TWRP included).
Click to expand...
Click to collapse
Tried doing this.. now it s hard bricked.
turbotales said:
Tried doing this.. now it s hard bricked.
Click to expand...
Click to collapse
You have flashed a Xiaomi Eu rom and it does not work?
And with Miflash?
NOSS8 said:
You have flashed a Xiaomi Eu rom and it does not work?
And with Miflash?
Click to expand...
Click to collapse
I tried flashing with Miflash didnt work,
Tried flashing with linux and said it is done, but now device does not open in any way. What should I do?
These are the screenshots of the Xiaomi Eu rom?
What is the version of your phone? (11 pro/Poco).
What rom were you on?
post the Miflash log.
NOSS8 said:
These are the screenshots of the Xiaomi Eu rom?
What is the version of your phone? (11 pro/Poco).
What rom were you on?
post the Miflash log.
Click to expand...
Click to collapse
Downloaded the rom from the link you sent me earlier. My device is veux and had MIUI13 before getting bricked.
Again the device got bricked from the last think i did. Do you know what wen wrong?
turbotales said:
Downloaded the rom from the link you sent me earlier. My device is veux and had MIUI13 before getting bricked.
Again the device got bricked from the last think i did. Do you know what wen wrong?
Click to expand...
Click to collapse
If you tried with Miflash post the log otherwise try and post the log.
Solved, I'm dumber than I thought. This phone is not veux. It's viva. If I were to re-check it I d not be in this position... Let this be a lesson to me. Going to have to take it to the service now.

Categories

Resources