Hi,
I own an S22 ultra Exyonos 128gb and i'm having severe issues.
I was using the device (chrome) and it suddenly froze, and powered off. I powered back on, and it almost immediately powered off again. Since then ive been unable to power on.
I've tried force restarting, plugging into a PC with a usb-c cable and holding down volume up and power for 5-10 secs, but nothing happens. The phone simply gets stuck on the Samsung logo screen, sometimes the basic "Samsung" screen, and sometimes the "Samsung S22 ultra 5g secured by knox" screen.
Also when trying to charge with a cable, no animation to show charging pops up, ive not tried wireless charging yet.
Any idea how I can boot into recovery mode
If vol up + power doesnt work?
Thanks in advance
Can you boot into download mode (cable unplugged and device off press Vol Up and Down together and plug in cable) ? What is the screen showing after you agree to enter download mode ?
Is your device rooted or else modified in any way ? Did you do anything special prior to this behaviour ?
Hi s3axel,
thanks for replying.
yes, I can access download mode, it comes up with a Warning page saying "A custom OS can cause critical problems in phone and installed application. if you want to download a custom OS, press the volume up key"
No, the phone isn't rooted.
Nothing out of the ordinary was being done, I was just on google chrome browsing Reddit, when all of a sudden it froze, wouldn't respond to touch or power/wake button presses, and then crashed, and hasn't been able to boot u since.
I did have issues with the phone previously randomly crashing and then restarting and thought it could be malware. I booted into safe mode to see if it occurred again and if so an app could be the cause, but it didn't. I then booted normally and ran a virus scan with Samsungs in-built anti-virus software and then again with Malwarebytes, but nothing was found. it happened a few more times before stopping after a software update, so I thought nothing more of the issue until now.
Related
Hello,
I flashed the latest LRX22C image on my nexus 5 today.Had flashed it clean,wiping data,cache and system etc except the Internal Storage.Then I flashed the SUPERSU 2.37 ZIP .Everything was fine for about 4 hours.Then suddenly when I pressed the power button to turn the screen off,it was not turning off and the "Switch off" mode was popping up instead .Then, when I got a call,it switched off.The phone won't turn on again.It starts,the Google Boot Splash appears and the bootanimation starts for like 2 seconds and it switches off.Same thing for bootloader mode.
Please Help me!
EDIT: Now its turning on by itself and switches off in 2 seconds!
Sounds like a bad power switch to me, but of course that is just my opinion. :good:
sounds like a mech issue.
legit isue
I have the same problem on mine now... Basically my phone powered down around 45%. Battery. At the time i thought it was dead... But it wasnt. When i would plug into external power, either usb or through wireless charging it would power cycle continuously at the android splash screen.... (1 to 2 second intervals - even if i booted into fastboot) Interestingly it would never go to the battery charging mode. But automatically boot on charge... It did this for about 6 hours then i gave up and left it unplugged for a day. I plugged it back in and it started power cycling again, however this time on its third boot it came back to life . thats when i discovered i still had 40% battery... I dont know what exactly made it boot but it did. Oddly also on boot, it started optimising apps and finishing install again. I checked the md5 before I installed the update so no issue there. Since it powered up i have powered the phone off using the power button long push and let the phone power down. After doing this when i plug the phone in to usb charge it goes to the charge screen. No issue. That said, if i try to power up while tethered and charging it will not allow it. It just stays at the charge screen. As soon as i unplug the usb the power button allows the phone to power up and work... When booted up it charges as normal when plugged in. Im convinced there is an issue with the power management drivers or drivers for the button controls. My phone worked fine until the 5.0.1 update was installed. On my nexus 5. Anyone else or just us two? Ive had a hard time finding people posting on this issue.
Just some minutes ago my S7 froze because of Focus Gallery App. I don't exactly know what it did but the phone did not respond any more.
So pressing the power button did not bring back the phone either. After searching for a bit I found a way to simulate a bettery disconnect by pressing Volume Down + Power Button.
The Phone came back up and displayed the initial boot logo. Also the blue LED is on. But nothing happens from here on. I do not come to the "Samsung" boot animation and the phone simply
does nothing. Retriying Volume Down + Power Button doesn't seem to help too. I tryed all button combinations but nothing brings the phone back.
I also cannot enter the recovery menu. So no chance to reset to default settings.
I am running a stock Android on the phone. Nothing was done by me. No custom ROM, no root, just plain Samsung Android.
Is there sill something I can do?
Edit: I just got into whats seems to be ODIN Mode??? Can I do something from here?
Oddly this happened to me last night although I may have inadvertently done it. But the only way I was able to get my phone functioning again was reflashing the OS to the phone.
How did you manage to get the phone into Odin mode? I'm having the same issue with the phone being totally unresponsive but the blue LED on.
if you can reboot your phone with the VOL Down/Power, when the screen goes black, quickly press and hold VOL Up, Home and Power. it should enter recovery. or hold Vol down, Home and Power to enter the download screen.
I have the S7 Edge (rooted, custom ROM) and it's running fine. My girlfriend's regular S7 is having the same issue though.
When she plugged it in to charge last night, she checked it a few minutes later at which point the phone had (started to) reboot. The blue notification LED was on and the screen had frozen at the 'SA' from the 'SAMSUNG' startup logo. Forced a reboot with down+power, resulting in just the blue LED (no logo this time). Phone was unresponsive (couldn't force a reboot again) so left the battery to drain overnight. The phone is completely dead today even after charging - no LED, no boot, no anything.
I'm not sure if she had the phone scheduled to perform an update overnight and it froze halfway through, but that would be my first guess. So far, no fix.
Hi everyone,
My phone got updated to UI 3.1, after the restart it has gone into boot loop. I am not able to enter the recovery also. Not able to turn it off, it continuously restarts after the Samsung Galaxy M31w powered by Knox screen.
I have connected the USB to the PC and tried all the combinations to enter the recovery mode.
Kindly help please.
Use the buttons to try to force a hard reset.
Otherwise, let it run down until it auto shuts down unless you can easily pull the battery.
Charge to at least 50% before trying to boot up.
Hopefully it will at least allow access to the boot menu afterwards.
That really sucks... if you're near a Samsung Experience center drag it into them.
I'm having far less issues than you with Samsung updates but the recent Wearables update trashed my bt partially. It's still fighting me even after a roll back. grrrr... it was working fine until that forced update
you might need to use a cable to enter recovery or download modes now like other Samsung phones.
the instant the screen goes black try holding volume up and power and plugging in the USB cable that's connected to something on the other end.
Did you solved the problem???
Was watching youtube videos last night before my phone died, now I can't get it to start boot into the OS. Not sure if this is relevant but my power button had been a little finnicky- rather maybe not the power button itself because it doesn't feel stuck or anything at all but I noticed that it would take an extra second or two after pressing the power button to get into my lock screen. I never really paid attention because it only happened once in a while and I would just restart my phone and be done with it. However I can't even get into the lock screen or anything now.
After my phone died last night I plugged it in right away and came back a while later to turn it on. I tried turning it on but noticed my phone just kept rebooting. It's still repeatedly rebooting and I can only get in the fastboot menu by holding down both volume buttons when rebooting. I get the options power off- which just reboots it after a while, start - which just reboots the phone, restart boot loader- which literally takes me back to the same menu, recovery mode- just reboots and show barcode which shows the barcode at the bottom of the menu.
I've tried downloading the qualcomm driver and trying to get into EDL mode but don't see it on my pc or msmtool, i'm also not even sure if i'm trying to get into EDL mode correctly. I've tried disable Driver signature Enforcement and then redownloading the qualcomm driver but still no luck. I don't know what else I should try. Someone please help me out, i'm pissed this happened just because my phone died, about to have ptsd whenever my phone is at 5% fml.
Also after seeing the 1+ logo and powered by android on the bottom, sometimes I would see like a line of color, which I would assume is text not being rendered all the way, fade out and then the phone shuts down and reboots itself.
yellownese said:
Was watching youtube videos last night before my phone died, now I can't get it to start boot into the OS. Not sure if this is relevant but my power button had been a little finnicky- rather maybe not the power button itself because it doesn't feel stuck or anything at all but I noticed that it would take an extra second or two after pressing the power button to get into my lock screen. I never really paid attention because it only happened once in a while and I would just restart my phone and be done with it. However I can't even get into the lock screen or anything now.
After my phone died last night I plugged it in right away and came back a while later to turn it on. I tried turning it on but noticed my phone just kept rebooting. It's still repeatedly rebooting and I can only get in the fastboot menu by holding down both volume buttons when rebooting. I get the options power off- which just reboots it after a while, start - which just reboots the phone, restart boot loader- which literally takes me back to the same menu, recovery mode- just reboots and show barcode which shows the barcode at the bottom of the menu.
I've tried downloading the qualcomm driver and trying to get into EDL mode but don't see it on my pc or msmtool, i'm also not even sure if i'm trying to get into EDL mode correctly. I've tried disable Driver signature Enforcement and then redownloading the qualcomm driver but still no luck. I don't know what else I should try. Someone please help me out, i'm pissed this happened just because my phone died, about to have ptsd whenever my phone is at 5% fml.
Also after seeing the 1+ logo and powered by android on the bottom, sometimes I would see like a line of color, which I would assume is text not being rendered all the way, fade out and then the phone shuts down and reboots itself.
Click to expand...
Click to collapse
Which OOS build are you on? And your device is unlocked or not?
Getting into EDL mode is tricky. Power off device completely. With the device powered off, hold down volume up and volume up at the same time, keep them pressed all the time, and during that time plug into PC (phone all the time powered off). Still hold both of the buttons. By the time you plug into PC, you should be in EDL mode, BUT it only lasts about 10 seconds. I mean you have to click start in this 10 seconds time bracket, other way phone exits EDL itself. After you click start, you can release button, obviously
A few weeks after switching from my old S7 Edge to my old S8 (which I did about a month ago), I tried turning on my S7 Edge only for it to enter recovery mode. Since the power button is broken, I figured I would have to reboot it out of recovery mode using ADB on my PC. When I switched my S7 on again the next day to enter recovery mode and connect it to my PC, I got to the "installing updates" screen that precedes recovery mode. This screen showed up for about three seconds before my screen went black. After 10 seconds my phone rebooted and went back to the "installing updates" screen, went black, rebooted, and so on.
I think my phone might be out of battery so when it charges a little bit, it automatically tries to enter recovery mode, which uses up all the power in the battery and causes it to die, restarting the cycle. Is there any way I can stop my phone from automatically turning on when it is plugged in so that it can charge enough to actually make it to recovery mode?
Thanks!
For some reason, the bootloader on this device remembers if you were last booted into recovery, and will return to it on the next poweron, so - without a working power button - there aren't very many options.
The power button could be an easy fix - depending on if it's stuck or damaged. The outer parts of the volume and power buttons on this device are interchangable, so that could make all boot modes possible again. Opening your device may sound scary, but - with good research and some patience - you will find it is certainly doable using basic tools. And if you don't want to do it yourself, a local repair shop would probably do it for cheap as well.
As far is I know, there isn't any usable software fix without a working power button.