Database Info

[Q] Xposed Framework on Cm12s?

Is it possible to install xposed framework on cm12s?
Through the xposed installer I always get an error: 'CANNOT LINK EXECUTABLE: could not load library "libdvm.so" needed by "/data/data/de.robv.android.xposed.installer/cache/app_process"; caused by library "libdvm.so" not found'
It also says that Xposed is not compatible with Android SDK Version 21 or my Processor architecture.
Obviously I am using a OnePlus One. With CM12s.
Thanks in advance,
TheKampfkeks96

I also have this issue. I haven't looked through any forums yet though, I just saw your post and thought I'd see if you had anything on it.

NoSyt15 said:
I also have this issue. I haven't looked through any forums yet though, I just saw your post and thought I'd see if you had anything on it.
Click to expand...
Click to collapse
Try to use the latest alpha. Also, there is an apk (installer) and one zip you need to flash in order to make it work.
Downloads:
xposed-arm-*.zip: Must be flashed with a custom recovery to install the framework.
XposedInstaller_3.0-alpha*.apk: Must be installed to manage installed modules
http://forum.xda-developers.com/showthread.php?t=3034811

davebugyi said:
Try to use the latest alpha. Also, there is an apk (installer) and one zip you need to flash in order to make it work.
Downloads:
xposed-arm-*.zip: Must be flashed with a custom recovery to install the framework.
XposedInstaller_3.0-alpha*.apk: Must be installed to manage installed modules
http://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
Awesome. Thank you, I will try this now.

NoSyt15 said:
Awesome. Thank you, I will try this now.
Click to expand...
Click to collapse
Keep in mind that you need to flash the super alpha version for 5.1. A lot of stuff will be broken regardless what version you are on.

fogame said:
Keep in mind that you need to flash the super alpha version for 5.1. A lot of stuff will be broken regardless what version you are on.
Click to expand...
Click to collapse
Thank you very much, do you know when there will be a stable version?

fogame said:
Keep in mind that you need to flash the super alpha version for 5.1. A lot of stuff will be broken regardless what version you are on.
Click to expand...
Click to collapse
Cm 12s is 5.0.2 not 5.1 so you should go with 3.0 alpha build 2 on official xposed thread..
TheKampfkeks96 said:
Thank you very much, do you know when there will be a stable version?
Click to expand...
Click to collapse

TheKampfkeks96 said:
Thank you very much, do you know when there will be a stable version?
Click to expand...
Click to collapse
Only time will tell. the Devs are working on it

kunal1540 said:
Cm 12s is 5.0.2 not 5.1 so you should go with 3.0 alpha build 2 on official xposed thread..
Click to expand...
Click to collapse
Lifesaver! Thank you... commonsense prevails :silly:
I updated my oneplus last night with the latest OTA YNG1TAS2I3 and my copy of xposed didnt work in TWRP... so searched and found the latest arm22 version.... this still didnt work.
Reading your comment made me think to go back to the original old school 3.0 alpha version - THIS WORKED.
Thank you again!

Thanks for the reply. But I think the rest of the OnePlus One users would like to know exactly where you down loaded the files and any installation instructions we may need. Not knowing what old school means in this case.

bmaz121 said:
Thanks for the reply. But I think the rest of the OnePlus One users would like to know exactly where you down loaded the files and any installation instructions we may need. Not knowing what old school means in this case.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3034811
I have downloaded it from the above link.
--> Download arm.zip and flash it and then wipe dalvik cache and reboot and be patient.
--> Download the alpha4.apk and install
--> You're good to go,Download your favourite modules
It worked for me
Donate to rovo89 or thank me or both:good:

Error with latest update YOG4PAS1N0
Hi,
flashed yesterday this Image (I am on TWRP), I tried to flash again flash 3.0 but I got an error from TWRP and when started the device was unusable (lot of FC).
Had to flash again the Image.
Anyone with this problem? I don't want to try again because the wipe cache and subsequent "Upgrading..."is excuciating
Thanks!

SergioBigred said:
Hi,
flashed yesterday this Image (I am on TWRP), I tried to flash again flash 3.0 but I got an error from TWRP and when started the device was unusable (lot of FC).
Had to flash again the Image.
Anyone with this problem? I don't want to try again because the wipe cache and subsequent "Upgrading..."is excuciating
Thanks!
Click to expand...
Click to collapse
I did not quite get your exact problem.Hence I am trying to reiterate clearly.
--> Download the arm.zip(not 64) file in the above link.Reboot to recovery(twrp).Go to install and locate the file and flash it and wipe dalvik/cache and reboot and be patient.
--> After reboot, download the .apk(alpha4) file from above link and install it and open the installed xposed installer app.
Hope it is more clear than my earlier comment and it helps you
OpO

ScreaMRooT said:
I did not quite get your exact problem.Hence I am trying to reiterate clearly.
--> Download the arm.zip(not 64) file in the above link.Reboot to recovery(twrp).Go to install and locate the file and flash it and wipe dalvik/cache and reboot and be patient.
--> After reboot, download the .apk(alpha4) file from above link and install it and open the installed xposed installer app.
Hope it is more clear than my earlier comment and it helps you
OpO
Click to expand...
Click to collapse
When you say be patient, how patient is patient? I've left it for 10-15 mins and still never gotten past the splash.

Which version is your OS?It worked in 5.0.2
OpO

Help install Xposed Framework rom stock Sprint 6.0.1

Bootloop logo "error 1", i use v80-23-arm64. Sorry, my poor english.
Ok woking. Titanium Backup>Unstall file HTC DM>Recovery>Install v80 arm64.

As far as I can see, xposed doesn't work for carrier based A9's (sprint, at&t, etc) only on the unlocked and eu versions

MGfusion said:
As far as I can see, xposed doesn't work for carrier based A9's (sprint, at&t, etc) only on the unlocked and eu versions
Click to expand...
Click to collapse
It works fine for me. I deodexed the stock Sprint ROM just fine. I used version 1.0.2.6 of Superr's kitchen. The newer versions caused bootlooping. Also, no apps optimizing at boot. Just took literally forever to boot for the first time. Just gotta be patient. I could upload the system image I created, but, you either have to use download mode to flash it, or TWRP 3.0 or greater. Creating a zip didn't seem to work.

Ok, is working.

holofractal said:
It works fine for me. I deodexed the stock Sprint ROM just fine. I used version 1.0.2.6 of Superr's kitchen. The newer versions caused bootlooping. Also, no apps optimizing at boot. Just took literally forever to boot for the first time. Just gotta be patient. I could upload the system image I created, but, you either have to use download mode to flash it, or TWRP 3.0 or greater. Creating a zip didn't seem to work.
Click to expand...
Click to collapse
Yeah but that is deodexed, I'm talking stock odexed ROM that xposed doesn't work witj

deodexed stock rom for 6.0.1?
holofractal said:
It works fine for me. I deodexed the stock Sprint ROM just fine. I used version 1.0.2.6 of Superr's kitchen. The newer versions caused bootlooping. Also, no apps optimizing at boot. Just took literally forever to boot for the first time. Just gotta be patient. I could upload the system image I created, but, you either have to use download mode to flash it, or TWRP 3.0 or greater. Creating a zip didn't seem to work.
Click to expand...
Click to collapse
how did you deodexed the stock MM 6.0.1 rom? please help me out

You need Linux, 64 bit. I used Ubuntu.
Get the RUU Decryptor in the Android development section, and Superr's kitchen 1.0.2.6 and the Sprint 6.0.1 RUU exe. The readme should contain the instructions on how to decrypt the ROM, and the program should spit out a system.img and a boot.img
From there, make a new project in Superr's kitchen, copy the files into the project folder, extract for new ROM, go to ROM tools, and deodex and root.
Just build a system.img, from there, you can use the latest TWRP and flash it. Don't try making a .zip, it won't flash.
I could compress the system img I made and upload it somewhere if you can't do it yourself.

holofractal said:
You need Linux, 64 bit. I used Ubuntu.
Get the RUU Decryptor in the Android development section, and Superr's kitchen 1.0.2.6 and the Sprint 6.0.1 RUU exe. The readme should contain the instructions on how to decrypt the ROM, and the program should spit out a system.img and a boot.img
From there, make a new project in Superr's kitchen, copy the files into the project folder, extract for new ROM, go to ROM tools, and deodex and root.
Just build a system.img, from there, you can use the latest TWRP and flash it. Don't try making a .zip, it won't flash.
I could compress the system img I made and upload it somewhere if you can't do it yourself.
Click to expand...
Click to collapse
Would you be willing to upload your build? I haven't found a working 6.0.1 deodex Sprint rom yet. On Windows. Otherwise, I'd attempt your thoughtful instructions myself.

could you post that?

Metroba said:
Would you be willing to upload your build? I haven't found a working 6.0.1 deodex Sprint rom yet. On Windows. Otherwise, I'd attempt your thoughtful instructions myself.
Click to expand...
Click to collapse
Batman's Cousin said:
could you post that?
Click to expand...
Click to collapse
Yes, I will try and compress it as much as I can. I might have to have you guys torrent it from my PC. I have a decent internet connection so you shouldn't have to wait too long. I'll also upload the boot.img I created. Ill be home at 12am PST so I'll get right on it.
I've been running it for over a month now no problems.

holofractal said:
Yes, I will try and compress it as much as I can. I might have to have you guys torrent it from my PC. I have a decent internet connection so you shouldn't have to wait too long. I'll also upload the boot.img I created. Ill be home at 12am PST so I'll get right on it.
I've been running it for over a month now no problems.
Click to expand...
Click to collapse
thank you so much... and a torrent would be great so happy to hear this

Batman's Cousin said:
thank you so much... and a torrent would be great so happy to hear this
Click to expand...
Click to collapse
Be warned, it will take FOREVER to boot the first time, give it 20 minutes or so. Make sure you're already on 6.0.1 firmware and using a Sprint device of course. I posted in the Apps and Themes section in the Compatible Xposed modules thread about modules I'm using if you want to take a look at that. It's quite a list, and everything I'm running works fine. I even enabled the AOSP lockscreen and am using Lockscreen Widgets.

holofractal said:
Be warned, it will take FOREVER to boot the first time, give it 20 minutes or so. Make sure you're already on 6.0.1 firmware and using a Sprint device of course. I posted in the Apps and Themes section in the Compatible Xposed modules thread about modules I'm using if you want to take a look at that. It's quite a list, and everything I'm running works fine. I even enabled the AOSP lockscreen and am using Lockscreen Widgets.
Click to expand...
Click to collapse
i don't even have a version of 6.01 for sprint i have an odex and deodex for 6.0 lol anyway could you include this as well sorry don't mean to be bothersome

Here are all the files you'll need. If you're not on 6.0.1, download 2PQ9IMG.zip and put it on the root of your SD card, and flash it. Then, after that, download the superr_6.0.1 zip, extract files and use fastboot to flash them.
fastboot flash system system.img
fastboot flash boot boot.img
Don't forget to reinstall twrp. I've included the latest one as of writing in the Google drive folder. Xposed v81 is also there, as well as SuperSU 2.71 beta.
https://drive.google.com/folderview?id=0Bz5DIfm93CXEMU9XbzUtYmNuLVU
Sent from my 2PQ93 using XDA-Developers mobile app

holofractal said:
Here are all the files you'll need. If you're not on 6.0.1, download 2PQ9IMG.zip and put it on the root of your SD card, and flash it. Then, after that, download the superr_6.0.1 zip, extract files and use fastboot to flash them.
fastboot flash system system.img
fastboot flash boot boot.img
Don't forget to reinstall twrp. I've included the latest one as of writing in the Google drive folder. Xposed v81 is also there, as well as SuperSU 2.71 beta.
https://drive.google.com/folderview?id=0Bz5DIfm93CXEMU9XbzUtYmNuLVU
Sent from my 2PQ93 using XDA-Developers mobile app
Click to expand...
Click to collapse
@holofractal, you are a good good man! You deserve whatever happiness and success life gives you. Thank you so much for uploading your files so generously! You didn't even have to do that! Going to give this a shot as soon as possible today. Will let you know how it goes. Super stoked to get back on Xposed.

Cant thank you enough
holofractal said:
Here are all the files you'll need. If you're not on 6.0.1, download 2PQ9IMG.zip and put it on the root of your SD card, and flash it. Then, after that, download the superr_6.0.1 zip, extract files and use fastboot to flash them.
fastboot flash system system.img
fastboot flash boot boot.img
Don't forget to reinstall twrp. I've included the latest one as of writing in the Google drive folder. Xposed v81 is also there, as well as SuperSU 2.71 beta.
https://drive.google.com/folderview?id=0Bz5DIfm93CXEMU9XbzUtYmNuLVU
Sent from my 2PQ93 using XDA-Developers mobile app
Click to expand...
Click to collapse
your the best man thanks for the pm your a really cool guy

Metroba said:
@holofractal, you are a good good man! You deserve whatever happiness and success life gives you. Thank you so much for uploading your files so generously! You didn't even have to do that! Going to give this a shot as soon as possible today. Will let you know how it goes. Super stoked to get back on Xposed.
Click to expand...
Click to collapse
Let me know if it works.

@holofractal, you weren't kidding about it taking forever to load - 2 whole minutes lol! It really amazes me how each phone can have such different results. Rom is loaded. Will report how it all works. Thank you so much, man! You are truly a saint!

Metroba said:
@holofractal, you weren't kidding about it taking forever to load - 2 whole minutes lol! It really amazes me how each phone can have such different results. Rom is loaded. Will report how it all works. Thank you so much, man! You are truly a saint!
Click to expand...
Click to collapse
You flashed the system.img correct?
Sent from my 2PQ93 using XDA-Developers mobile app

holofractal said:
You flashed the system.img correct?
Sent from my 2PQ93 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, everything is flawless. Enjoying my xposed again . Ty, again holo. Gonna check your modules thread next. Need a good nav bar tweaker and want cm lockscreen.
Sent from my 2PQ93 using Tapatalk

CarbonROM Official

Hey there peoples of the internet...
Saw this right after it hit frontpage, but nothing has popped up [in the forums] informing users about it.
So... I'm just going to leave this here
https://www.xda-developers.com/carbonrom-android-oreo-now-available/

Downloading now...can't wait to test

BakedTator said:
Downloading now...can't wait to test
Click to expand...
Click to collapse
Please keep us posted. I'm very curious how this runs.

So far it's running good...works with the Linux upstream kernel for Los...installed Google camera with magisk mod no problem
Have to flash Gapps but that's easy, and yea...some themes don't wanna work with the system UI so try at your own risk...but for the first 2 hours it seems really good

BakedTator said:
So far it's running good...works with the Linux upstream kernel for Los...installed Google camera with magisk mod no problem
Have to flash Gapps but that's easy, and yea...some themes don't wanna work with the system UI so try at your own risk...but for the first 2 hours it seems really good
Click to expand...
Click to collapse
How much is better/worse than Los?

gregfink83 said:
How much is better/worse than Los?
Click to expand...
Click to collapse
More features as far as I know but about the same

BakedTator said:
So far it's running good...works with the Linux upstream kernel for Los...installed Google camera with magisk mod no problem
Have to flash Gapps but that's easy, and yea...some themes don't wanna work with the system UI so try at your own risk...but for the first 2 hours it seems really good
Click to expand...
Click to collapse
Can you please explain the steps. And which gapps, I am unable to flash gapps

amitbhavi said:
Can you please explain the steps. And which happens, I am unable to flash gapps
Click to expand...
Click to collapse
You first, need to pull the boot.img...ill leave instructions in the morning as I'm going to bed

amitbhavi said:
Can you please explain the steps. And which gapps, I am unable to flash gapps
Click to expand...
Click to collapse
Had this problem too. Tried flashing multiple gapps a plethora of different ways and was not ever able to get play store installed. I gave up and went back to stock

Goronok said:
Had this problem too. Tried flashing multiple gapps a plethora of different ways and was not ever able to get play store installed. I gave up and went back to stock
Click to expand...
Click to collapse
Here you go...to get Gapps installed, I used Gapps nano from open Gapps.
I just flashed the rom, rebooted to bootloader and flashed twrp, booted into recovery, flashed Gapps and the boot.img and was good to go

How can i get the Boot.img for the rom .... all i see is payload.bin and a few other files ... Thanks

tittieslover said:
How can i get the Boot.img for the rom .... all i see is payload.bin and a few other files ... Thanks
Click to expand...
Click to collapse
You have to use a dd command from the terminal in twrp
dd if=/dev/block/bootdevice/by-name/boot_a/b of=/sdcard/boot.img
Please replace the (a/b) with the slot that the rom flashed to

BakedTator said:
You have to use a dd command from the terminal in twrp
dd if=/dev/block/bootdevice/by-name/boot_a/b of=/sdcard/boot.img
Please replace the (a/b) with the slot that the rom flashed to
Click to expand...
Click to collapse
I used 3 different gapps. They all installed but could not get play services to stop crashing. Couldn't set up. Dam. Carbon is bad ars too.

tomzefi said:
I used 3 different gapps. They all installed but could not get play services to stop crashing. Couldn't set up. Dam. Carbon is bad ars too.
Click to expand...
Click to collapse
This is the exact same thing that happened to me.

fossiltkm said:
This is the exact same thing that happened to me.
Click to expand...
Click to collapse
Hopefully someone will figure it out. I want carbon. It's a good rom

Do I see in those screenshots that CarbonROM has OTA updates?
I loved CarbonROM back in the Good Old Days.

Skripka said:
Do I see in those screenshots that CarbonROM has OTA updates?
I loved CarbonROM back in the Good Old Days.
Click to expand...
Click to collapse
When I was going through the ROM and it's options it does have OTA now I don't know how that works on our phones with custom roms

Has anyone been able get GApps installed with this thing? I have tried both the suggested Mind The Gapps and Open GApps with no success...

paulr24 said:
Has anyone been able get GApps installed with this thing? I have tried both the suggested Mind The Gapps and Open GApps with no success...
Click to expand...
Click to collapse
did you follow the instructions few posts above?

For me it's not installing, it's that playservice keeps crashing

[Guide] TWRP with Magisk on 10.0.4.0 Stock ROM

GSI IS DONE CHECK THE LINK BELOW, IT'S CURRENTLY IN PROGRESS BELOW IS THE STATUS ME WORKING ON IT
THE GSI PIE TUTORIAL
Grab these two files (Big Thanks to @Zerovoid from 4PDA, @Seryioo, and @mac12m99)
Fixed SDCard Support TWRP Image File (Download this and put this on your SDCard and Computer)-
Original Fixed TWRP XDA Post
Fixed SDCard Support TWRP Installer Zip (Download and put this on your SDCard)-
Fixed TWRP .zip Installer
But I got TWRP on 10.0.4.0 with magisk, and Justice Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA, SD CARDS, ETC
Start with the phone being on with USB Debugging enabled correctly and bootloader unlocked
Type: adb reboot bootloader
So flash the 10.0.4.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer -
aboot.img
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.

Reserved

Looks like I'll be updating and trying when I get home wish me luck..

rob420p said:
Looks like I'll be updating and trying when I get home wish me luck..
Click to expand...
Click to collapse
I'll have the GSI Tutorial up as soon as possible. Let me know if you run into any problems!

I am curious does the backup n restore work with this?

rob420p said:
I am curious does the backup n restore work with this?
Click to expand...
Click to collapse
Everything in TWRP works sir, it was already functional the only component missing in the original is the SD Card Support which is fixed in the TWRP above!

But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Sent from my Phh-Treble vanilla using Tapatalk

cd492 said:
But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Click to expand...
Click to collapse
From what I have read this is happening to allot of devices running pie not just our device

cd492 said:
But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Sent from my Phh-Treble vanilla using Tapatalk
Click to expand...
Click to collapse
That's weird, I'm running Android Pie on A2L and Wi-Fi looks great.
Have you tried performing a full wipe and flashing the stock ROM?
I had other issues which were fixed by flashing the stock ROM with a full wipe.
Tbh I don't think the patch updates are 100% trustworthy, so I simply update it manually.

cd492 said:
But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Sent from my Phh-Treble vanilla using Tapatalk
Click to expand...
Click to collapse
lbsilva said:
That's weird, I'm running Android Pie on A2L and Wi-Fi looks great.
Have you tried performing a full wipe and flashing the stock ROM?
I had other issues which were fixed by flashing the stock ROM with a full wipe.
Tbh I don't think the patch updates are 100% trustworthy, so I simply update it manually.
Click to expand...
Click to collapse
This does not relate to this tutorial, there is nothing wrong with WiFi from this tutorial
I was talking about the GSI Tutorial I am making in the cyan text above nothing it wrong with this tutorial, if there was why would I post it

rob420p said:
Looks like I'll be updating and trying when I get home wish me luck..
Click to expand...
Click to collapse
Have you tested it?

InfinityXDA said:
Have you tested it?
Click to expand...
Click to collapse
Not yet I'm useing a new laptop and had trouble sitting up my cdrive I'll try again tonight

rob420p said:
Not yet I'm useing a new laptop and had trouble sitting up my cdrive I'll try again tonight
Click to expand...
Click to collapse
If you need assistance just let me know!

InfinityXDA said:
If you need assistance just let me know!
Click to expand...
Click to collapse
I main issue I was having was with mi flash for some reason when I check the Oreo Ron I can't find it in the files downloaded 5 times

rob420p said:
I main issue I was having was with mi flash for some reason when I check the Oreo Ron I can't find it in the files downloaded 5 times
Click to expand...
Click to collapse
You have to extract the file using WinZip, it's just like a .zip file. But after you extract the stock rom there should be another file in that extract that too and select the folder extracted folder with all of the .img in it in MiFlash.
You must have the Pie ROM to do this
Please make sure you have the latest ROM or latest patch from this link https://en.miui.com/getrom-354.html?

InfinityXDA said:
You have to extract the file using WinZip, it's just like a .zip file. But after you extract the stock rom there should be another file in that extract that too and select the folder extracted folder with all of the .img in it in MiFlash.
You must have the Pie ROM to do this
Please make sure you have the latest ROM or latest patch from this link https://en.miui.com/getrom-354.html?
Click to expand...
Click to collapse
Thanks this is a little different I'm used to Nexus or motorola devuces

rob420p said:
Thanks this is a little different I'm used to Nexus or motorola devuces
Click to expand...
Click to collapse
No problem I'm here to help!

Thanks for the nice Tutorial, the installation works fine.
Backup to the sd-card is now possible, but the restore doesn' work. It stops with this message:
Cannot restore System -- mounted read only

Linhx said:
Thanks for the nice Tutorial, the installation works fine.
Backup to the sd-card is now possible, but the restore doesn' work. It stops with this message:
Cannot restore System -- mounted read only
Click to expand...
Click to collapse
So it's not mounting right sounds like it can right but can't read

I found the solution here:
https://forum.hovatek.com/thread-15952.html
- Go to the TWRP Home Screen and select Mount
- Untick "Mount system partition read-only"
Restore was starting then, but after 99% this error appeared:
The extractTarFork() process ended with ERROR: 255
The device didn't start anymore and I had to set it up again.

Warning - Notchbarkiller Magisk Module!

Be careful. Yesterday I have installed this module on my pie rom and had bootloop when I tried to uninstall it. Nothing cant solve this issue, I had to flash whole pie rom.

That's why I bought this mobile with stock Android to be sure I'm not install something on it and the truth it's not worth to change something on it.
This mobile work pretty good without needing to root it.
No offense only my opinion.
Thanks
Mi A2 Lite using Tapatalk

wenna.speedy said:
Be careful. Yesterday I have installed this module on my pie rom and had bootloop when I tried to uninstall it. Nothing cant solve this issue, I had to flash whole pie rom.
Click to expand...
Click to collapse
Same happened to me on Android Pie, it completely broke my phone and when restarting it I had bootloop as well.
Had to flash ROM from scratch.

Maj3sty said:
That's why I bought this mobile with stock Android to be sure I'm not install something on it and the truth it's not worth to change something on it.
This mobile work pretty good without needing to root it.
No offense only my opinion.
Thanks
Mi A2 Lite using Tapatalk
Click to expand...
Click to collapse
I dont think so. you havent right, because of magisk. Did you ever try viper4android? Its really some kind of magic! this is only one case. no root = no lot of great stuff. If anything bad happened, you have ever last option = flash vanilla rom

For anyone who gets bootloops caused by a magisk module: Just flash back stock kernel! Then Magisk is gone and the module doesn´t work too. You can delete the module from your magisk manager and root again - voilla!

Voodoojonny said:
For anyone who gets bootloops caused by a magisk module: Just flash back stock kernel! Then Magisk is gone and the module doesn´t work too. You can delete the module from your magisk manager and root again - voilla!
Click to expand...
Click to collapse
I tried it and doesnt work. It seems the module changed any files in system(via root).

wenna.speedy said:
I dont think so. you havent right, because of magisk. Did you ever try viper4android? Its really some kind of magic! this is only one case. no root = no lot of great stuff. If anything bad happened, you have ever last option = flash vanilla rom
Click to expand...
Click to collapse
Nice try, but looks like you are not the only person with the same issue! I'm using Jetaudio and I have great sound with my JBL (Bluetooth) & Sennheiser wired headsets. I'm pass!!!
Mi A2 Lite using Tapatalk

lbsilva said:
Same happened to me on Android Pie, it completely broke my phone and when restarting it I had bootloop as well.
Had to flash ROM from scratch.
Click to expand...
Click to collapse
I get booloop from this module, now when i try to flash system, i get error: cannot load '.\system.img'. Pls i need help

hckrm said:
I get booloop from this module, now when i try to flash system, i get error: cannot load '.\system.img'. Pls i need help
Click to expand...
Click to collapse
Did you place system.img into your fastboot folder? It sounds like fastboot can´t find the file you want to flash!

Voodoojonny said:
Did you place system.img into your fastboot folder? It sounds like fastboot can´t find the file you want to flash!
Click to expand...
Click to collapse
yes, i have tried to flash the whole rom (except userdata) from .bat script of the official pie rom. But i get bootloop again. I have a lot of important data in my phone, is there a way to resolve without touching data?

hckrm said:
yes, i have tried to flash the whole rom (except userdata) from .bat script of the official pie rom. But i get bootloop again. I have a lot of important data in my phone, is there a way to resolve without touching data?
Click to expand...
Click to collapse
You can try install twrp and mount internal storage. I dont know if exists new version with working mounting.

hckrm said:
I get booloop from this module, now when i try to flash system, i get error: cannot load '.\system.img'. Pls i need help
Click to expand...
Click to collapse
Did you try using MiFlashTool?

hckrm said:
yes, i have tried to flash the whole rom (except userdata) from .bat script of the official pie rom. But i get bootloop again. I have a lot of important data in my phone, is there a way to resolve without touching data?
Click to expand...
Click to collapse
Hmm, as told above, then your only option is a backup with twrp. If you can't decrypt data with twrp (after you installed it - not booting) you can try to boot to slot b - that sometimes help. Just select under reboot in twrp or type "fastboot set_active b"...

wenna.speedy said:
Be careful. Yesterday I have installed this module on my pie rom and had bootloop when I tried to uninstall it. Nothing cant solve this issue, I had to flash whole pie rom.
Click to expand...
Click to collapse
There is no wipe required, I just got caught in the loop as well.
Two things you need:
-TRWP installed
-Uninmod installed (magisk module remover)
1. If you are stuck in the loop, boot into fastboot,
- connect your pc and run ADB & fastboot cmd, run the command fastboot boot recovery.img(or your TRWP image) and run TRWP
2. Download Uninmod zip, transfer to phone. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242&nocache=1
- Use TWRP to install Uninmod,
- remove the Notchkiller mod
- credits to veez21
3. find this file overlays.list and delete it from /data/resource-cache/overlays.list https://github.com/Magisk-Modules-Repo/NotchBarKiller/issues/3
- credits to MatChung
Reboot and there was like a minute of delay on same boot screen, but then it should boot fine.
If you are not stuck in the loop but just installed the module:
-remove the module in magisk
-find the file and delete it.
TLDR: remove the Notchbarkiller mod and remove overlays.list file. Reboot!
Hope it works. It did for me. Poco F1

I flashed this madule last night and found that it break calls. Could not make and receive phone calls. Huawei P20 Pro with EMUI 8.1 running.

Guys don't flash that LITERALLY SHIET module. It's bricking phones, i dirty flashed my rom and still couldn't recover it! I used Poco btw

D1stRU3T0R said:
Guys don't flash that LITERALLY SHIET module. It's bricking phones, i dirty flashed my rom and still couldn't recover it! I used Poco btw
Click to expand...
Click to collapse
Written in the first post...

wenna.speedy said:
Written in the first post...
Click to expand...
Click to collapse
I know...

Strange, I was using the January update when I first installed it and everything worked fine, no issues what so ever. I haven't tried it on the latest update but xiaomi's update might have messed the module. There's no reason what so ever to blame the module for not working on the latest update as they tend to break things. Just report back to the developer with something helpful like a logcat instead of making useless threads.
As of the bootloop there's no reason to wipe your data or reflash the ROM unless you have to. Just boot up in twrp and flash the magisk uninstaller which might be in the Magisk Manager folder or just search it online. Another way to do it is just to mount magisk in twrp and delete the module. Learn about how to mount magisk here: https://forum.xda-developers.com/apps/magisk/magisk-mount-resize-img-t3675853

SnoopDoggyStyleDogg said:
Strange, I was using the January update when I first installed it and everything worked fine, no issues what so ever. I haven't tried it on the latest update but xiaomi's update might have messed the module. There's no reason what so ever to blame the module for not working on the latest update as they tend to break things. Just report back to the developer with something helpful like a logcat instead of making useless threads.
As of the bootloop there's no reason to wipe your data or reflash the ROM unless you have to. Just boot up in twrp and flash the magisk uninstaller which might be in the Magisk Manager folder or just search it online. Another way to do it is just to mount magisk in twrp and delete the module. Learn about how to mount magisk here: https://forum.xda-developers.com/apps/magisk/magisk-mount-resize-img-t3675853
Click to expand...
Click to collapse
UPDATE: This thread is a false alarm as I managed to install the module on the March update and the only crash I get is from google play services with no bootloop and everything working. Maybe the OP has another phone and except that a module that is on the Mi A2 Lite thread should work on any phone or he's done something wrong. I will attach some screenshots to confirm that the module is indeed working and OP's post is a false alarm for stock A2 Lite ROMs (No custom ROM and not other phones)
NOTE: As you can see in the YouTube screenshot there's no black back on the left side of the screen as it should be without the module installed