Code:
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Introduction
This is the LineageOS 20for S20FE Snapdragon
This rom is far from done and im working pretty hard to fix it since i got the phone
Click to expand...
Click to collapse
Installation instructions
1. Install TWRP and patches VBMETA by afaneh92
2. Flash the zip inside of TWRP
3. Reboot recovery
4. Flash Gapps and any mod you like
4. Select reboot -> reboot to fastboot
6. flash the wifi fix kernel with fastboot flash boot pathtodownloadedbootimghere
Click to expand...
Click to collapse
Download
ROM
Click to expand...
Click to collapse
Changelog
Code:
Current changelog:07.12.2022
[note] 1st Release of Lineage 20.0
[new] Android 13 T
[changed]
[fixed] Rom boots into OS
Older changelogs:
Click to expand...
Click to collapse
FAQ
What works?
Wifi
Bluetooth
Usb
Camera
Fingerprint sensor
Reverse wireless charging
120hz display
MDNI
Audio
RIL
Stereo speaker
Microfone
Click to expand...
Click to collapse
What doesnt work ?
Sensors
Microphone and earpiece and speakers in calls
Macro lense and other fancy cams only main and front work right now
You tell me
This is only for Snapdragon S20FE not for exynos also not for S20 non fe
VOLTE DONT WORK AND IT WONT EVER WORK
For Gapps i recommend NikGapps
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@SGCMarkus
@Simon1511
@RaviJavaDeveloper
Sources
Code:
[URL="https://github.com/Samsung-sm8150-aosp]Repos[/URL]
awesome
Hi, in the installation instructions for the wifi fix kernel there is no link just pathtodownloadedbootimghere.
Thanks for this rom
I'm happy to see this is being developed. Thank you!
Good job thanks
link wifi fix kernel
GAPPS installed into nothing
Abandoned sorry im not smart enough
J0SH1X said:
Abandoned sorry im not smart enough
Click to expand...
Click to collapse
GAPPS installation failed without any google items
RockStor said:
GAPPS installation failed without any google items
Click to expand...
Click to collapse
becuase there is no free space for gapps on sytem partition cause you are not supposed to install gapps yet
J0SH1X said:
becuase there is no free space for gapps on sytem partition cause you are not supposed to install gapps yet
Click to expand...
Click to collapse
Ok, I understand
sad times
Please drop the boot.img for WIfi fix kernel
armeiz209 said:
Please drop the boot.img for WIfi fix kernel
Click to expand...
Click to collapse
the dev has quit the project. the 3rd dev to do so, 2 more are still working on things but I wouldn't get to hopeful.
3mel said:
the dev has quit the project. the 3rd dev to do so, 2 more are still working on things but I wouldn't get to hopeful.
Click to expand...
Click to collapse
OK, Thank you!
how is the work on its operation going impatiently waiting for a clean gp fate to finally get the power out of this phone to its full potential
J0SH1X said:
becuase there is no free space for gapps on sytem partition cause you are not supposed to install gapps yet
Click to expand...
Click to collapse
I was interested to get one for aosp developments, but this killed me. xD
What you know how dynamic partitions work ? i need to tell the system to add extra space for gapps which i did not do as youre not supposed to use this rom yet since like nothing works
haky 86 said:
I was interested to get one for aosp developments, but this killed me. xD
Click to expand...
Click to collapse
J0SH1X said:
What you know how dynamic partitions work ? i need to tell the system to add extra space for gapps which i did not do as youre not supposed to use this rom yet since like nothing works
Click to expand...
Click to collapse
I could make things works as well, I already did a stable oss with my a70 https://github.com/samsung-sm6150-devs. So I guess could do the same job on samsung's sm8250 if no one is working on it.
can't wait for the full working version . although it would be nice if, for example, the camera apaka or the sound from the voices were at the same level as originally
Related
hi guys, this kernel is the same as cyanogenmod
with the only difference that this updated to the latest revision by the Linux Foundation and codeaurora/kk_2.7-stable
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I clarify that, not overlocked and is not compiled with Linaro (maybe in the future)
Install instruction:
S-OFF:
1 - Flash the zip in recovery
2 - Wipe Dalvik-Cache and Cache (Recomended)
Click to expand...
Click to collapse
S-ON:
1 - You have fastboot drivers on your computer, Windows or Linux/Mac/Chrome
2 - Download kernel
3 - Reset the device in bootloader mode
4 - Open Terminal or Command Console
5 - Type this (without quotes) : "fastboot flash boot (drag the image boot, the terminal or command console) press enter
.....Example: fastboot flash boot boot.img
6 - When finished, disconnect the cable from your device, now reboot in recovery
7 - Wipe Dalvik-Cache and Cache (Recomended), now reboot in system
8 - Congratulations!
Click to expand...
Click to collapse
note: this kernel is for the new fstab!
Donwloads: Tab downloads and mirror
Source: Github
XDA:DevDB Information
[KERNEL][KitKat][AOSP][3.4.97], Kernel for the AT&T HTC One X
Contributors
josegalre
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.4.97
Stable Release Date: 2014-07-06
Created 2014-07-06
Last Updated 2014-07-07
Changelog:
06/JULY/14
* Update to linux/3.4.97
05/JULY/14
* Update to linux/3.4.96
* Update to codeaurora/caf/kk_2.7_rb1.41
Click to expand...
Click to collapse
There's a small error in your s-on instructions. Step 5 says to type "fastboot flash recovery" when it should say "fastboot flash boot" instead. Just thought I'd let you know, most people know better but you're bound to get someone who flashes the boot.img to their recovery partition.
Sent from my Evita
timmaaa said:
There's a small error in your s-on instructions. Step 5 says to type "fastboot flash recovery" when it should say "fastboot flash boot" instead. Just thought I'd let you know, most people know better but you're bound to get someone who flashes the boot.img to their recovery partition.
Sent from my Evita
Click to expand...
Click to collapse
thanks for the correction, the match: Costa Rica vs netherlands distracts me!
josegalre said:
thanks for the correction, the match: Costa Rica vs netherlands distracts me!
Click to expand...
Click to collapse
No problems. It was a pretty good game, very closely matched.
Sent from my Evita
Might be a silly question, but does it support S2W ?
sagar_tiru2006 said:
Might be a silly question, but does it support S2W ?
Click to expand...
Click to collapse
I'm gonna go out on a limb here and say probably not, it's basically the stock CM kernel.
Sent from my Evita
sagar_tiru2006 said:
Might be a silly question, but does it support S2W ?
Click to expand...
Click to collapse
timmaaa said:
I'm gonna go out on a limb here and say probably not, it's basically the stock CM kernel.
Click to expand...
Click to collapse
I would like to know how to add this, because I like the idea, Someone knows how to do that?
I'm sure there are multiple guides floating around on XDA that should be able to instruct you.
Sent from my Evita
josegalre said:
I would like to know how to add this, because I like the idea, Someone knows how to do that?
Click to expand...
Click to collapse
Something like this I think.
I cant pass from my bootanimation,
Kernel: last version
S-Off
Paranoid Android ROM
I've Installed another Kernel, and happen the same, cant pass the bootanimation.
3.4.97 kernel is force closing the CM themes engine on latest PAC nightly.
Edit: Enclosed the Logcat
Sent from my One XL using XDA Free mobile app
Mexickano said:
Im cant pass from my bootanimation,
Kernel: last version
S-Off
Paranoid Android ROM
I've Installed another Kernel, and happen the same, cant pass the bootanimation.
Click to expand...
Click to collapse
Please clear the Cache and Dalvik, I am able to successfully boot with PAC ROM.
Mexickano said:
Im cant pass from my bootanimation,
Kernel: last version
S-Off
Paranoid Android ROM
I've Installed another Kernel, and happen the same, cant pass the bootanimation.
Click to expand...
Click to collapse
Please wipe dalvik-cache!
sathish804 said:
3.4.97 kernel is force closing the CM themes engine on latest PAC nightly.
Edit: Enclosed the Logcat
Sent from my One XL using XDA Free mobile app
Click to expand...
Click to collapse
curious! I have the latest weekly and it works! 'll check the logcat!
you wiped dalvik / cache?
E dalvikvm: Dex cache directory isn't writable: /data/dalvik-cache
clean data themes
Click to expand...
Click to collapse
josegalre said:
curious! I have the latest weekly and it works! 'll check the logcat!
you wiped dalvik / cache?
Click to expand...
Click to collapse
The latest one which I have downloaded is of 07/07 Nightly .. In your screen shot CM version is 05/07 but in mine it is 07/07
sathish804 said:
The latest one which I have downloaded is of 07/07 Nightly .. In your screen shot CM version is 05/07 but in mine it is 07/07
Click to expand...
Click to collapse
right so the photo title says weekly, with kernel 3.4.82 (nightly build) the theme engine works?
josegalre said:
right so the photo title says weekly, with kernel 3.4.82 (nightly build) the theme engine works?
Click to expand...
Click to collapse
I will test it and post you the results.
---------- Post added at 02:37 PM ---------- Previous post was at 02:19 PM ----------
josegalre said:
right so the photo title says weekly, with kernel 3.4.82 (nightly build) the theme engine works?
Click to expand...
Click to collapse
Tested with 3.4.82 and 3.4.96 both are not giving any error with themes engine.
Sent from my One XL using XDA Free mobile app
josegalre said:
Please wipe dalvik-cache!
Click to expand...
Click to collapse
I did it before, twice.
Sorry I forgot to mention before.
Mexickano said:
I did it before, twice.
Sorry I forgot to mention before.
Click to expand...
Click to collapse
the ROM you have used the new fstab?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*
Introduction
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Click to expand...
Click to collapse
Installation instructions
First time installing CyanogenMod 13.0 to your Galaxy S3 I9305, or coming from another ROM:
- Read known issues ans FAQs
- Flash one of the recovery images (CWM or TWRP)
- Copy GApps and CM13.0 ZIPs to your SDCard
- Boot into Recovery
- Flash CM13.0 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 13.0:
- Copy CM13.0 ZIP to your SDCard
- Boot into Recovery
- Flash CM13.0 zip from SDCard
- Reboot
Click to expand...
Click to collapse
Download
Project Link
Click to expand...
Click to collapse
Changelog
Code:
Current changelog: -- 19/11/2015
Initial Release
Click to expand...
Click to collapse
Working:
Wifi
Camera
Nfc turns on dont know if it works
Click to expand...
Click to collapse
Not Working:
RIL
External SdCard (causes bootloops)
You tell me???
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Google
* Cyanogenmod team
* Samsung for making it damn hard to compile for this device
please note to get this to boot you need to remove your sdcard
Screenshot? *-*
daviidbarco said:
Screenshot? *-*
Click to expand...
Click to collapse
It looks the same as lollipop :s
Sent from my GT-I9305 using XDA Forums
Marshmellow is in the house!
Please dont stop working on Cm12.1.
Buy the way how much faster is then the Cm12.1?
Sources?
ZjemCiKolege said:
Sources?
Click to expand...
Click to collapse
RIL not working meant that the sim card isn't working?
yes, no mobile data atm
Good news, I keep my fingers crossed for your Marshmy'. I hope there will be working MMS (weak point of lollipops) and other stuff in (near) future. Then I'll be completely satisfied
PS. Fix thread name - MarsHmallow, not Marsmallow.
Sectorian said:
Please dont stop working on Cm12.1.
Buy the way how much faster is then the Cm12.1?
Click to expand...
Click to collapse
It will work much faster than 5.1.1. It just need a lot of work
Wysłane z mojego GT-I9305 przy użyciu Tapatalka
Sectorian said:
Please dont stop working on Cm12.1.
Buy the way how much faster is then the Cm12.1?
Click to expand...
Click to collapse
Cm 12.1 is just about finished with the cm team. It hardly gets updated now
Sent from my GT-I9305 using XDA Forums
I will do another build when I get home from work to see if enabling selinux in permissive will cause bootloop
Sent from my GT-I9305 using XDA Forums
which is the difference between this version and the lollipop ? what's new in this version?
daviidbarco said:
which is the difference between this version and the lollipop ? what's new in this version?
Click to expand...
Click to collapse
Uhm... Lollipop was lollipop, Marshmallow is marshmallow? Seriously? How about you google this ? What type of question is this ?
What's the difference between windows 8 and windows 10 ?
Anyhow, @winxuser:
Thank you very much for not leaving us
daedric said:
Uhm... Lollipop was lollipop, Marshmallow is marshmallow? Seriously? How about you google this ? What type of question is this ?
What's the difference between windows 8 and windows 10 ?
Anyhow, @winxuser:
Thank you very much for not leaving us
Click to expand...
Click to collapse
Haha well I'm trying my best to stay ATM. The phone repair shop has had my g3 for 3 weeks now and I still haven't heard back from him.. He is usually pretty quick with phone repairs.. I must of really damaged the efs and modem partitions
Sent from my GT-I9305 using XDA Forums
winxuser said:
Haha well I'm trying my best to stay ATM. The phone repair shop has had my g3 for 3 weeks now and I still haven't heard back from him.. He is usually pretty quick with phone repairs.. I must of really damaged the efs and modem partitions
Sent from my GT-I9305 using XDA Forums
Click to expand...
Click to collapse
Ha, we really give a job to the phone repair guys . Also, I've found some new things in your build:
1) Dialer is finally not causing any lag while opening the numbers menu.
2) Trying to unlock the phone causes a bootloop - every time.
limnaln said:
Ha, we really give a job to the phone repair guys . Also, I've found some new things in your build:
1) Dialer is finally not causing any lag while opening the numbers menu.
2) Trying to unlock the phone causes a bootloop - every time.
Click to expand...
Click to collapse
I confirm above. The issue of bootloop when trying to unlock the phone ia very annoying
Hi,
good job. Could you, please, provide source code for android_device_samsung_i9305? Or am I missing something and it is already available somewhere? I`d like to try my own build and some debugging.
Thanks
daedric said:
Uhm... Lollipop was lollipop, Marshmallow is marshmallow? Seriously? How about you google this ? What type of question is this ?
What's the difference between windows 8 and windows 10 ?
Anyhow, @winxuser:
Thank you very much for not leaving us
Click to expand...
Click to collapse
hahahahahahahaahaha. yessssss! what is the difference lollipop rom and marshmallow rom? hahah
Source codes:
TWRP: https://github.com/omnirom/android_bootable_recovery/tree/android-6.0
Device tree: https://github.com/kumajaya/android_device_xiaomi_libra/tree/cm-13.0-twrp
https://github.com/kumajaya/android_device_xiaomi_aqua/tree/cm-13.0-twrp
Kernel: https://github.com/kumajaya/android_kernel_xiaomi_msm8992/tree/marshmallow
Compiled binary later, source codes much important
This recovery feature almost identical to official TWRP recovery for bullhead (including system image and EFS backup) + f2fs support (tested on /cache partition, compatible ROM/kernel needed). Aroma support need more test, AromaFM 2.00b7 working great so far.
Screenshot attached. AromaFM 2.00b7 seems work correctly, wrong color space for AromaFM 1.9.1 .
Download link: https://goo.gl/SIhNiV For source code please check post #1 :laugh:
Is touchscreen is still there?
ajitkatte said:
Is touchscreen is still there?
Click to expand...
Click to collapse
Tell me You can try it without a flash using "fastboot boot recovery.img" command. Touchscreen issue depend on your ROM kernel version, should be no problem for MIUI 7.2.1.0 or 7.2.3.0 or unofficial ROM with kernel built from Xiaomi source. Maybe I will build fully compatible kernel for stock ROM but currently I still focus on my own device tree source.
great work!
touchscreen confirmed ok on my device.
emfox said:
great work!
touchscreen confirmed ok on my device.
Click to expand...
Click to collapse
Slow but sure Please check my libra device tree source, how if we put bullhead inside our device :laugh:
ketut.kumajaya said:
Slow but sure Please check my libra device tree source, how if we put bullhead inside our device :laugh:
Click to expand...
Click to collapse
so bullhead is the most suitable template for libra, right?
emfox said:
so bullhead is the most suitable template for libra, right?
Click to expand...
Click to collapse
I don't know until the first build ready to flash
emfox said:
so bullhead is the most suitable template for libra, right?
Click to expand...
Click to collapse
ROM build just started. Still a lot of fix needed, I hope it will boot on the first try as I have done for Redmi 2
ketut.kumajaya said:
ROM build just started. Still a lot of fix needed, I hope it will boot on the first try as I have done for Redmi 2
Click to expand...
Click to collapse
So, this recovery so perfect. 54 download almost without any feedback. No feedback = no complain = no issue or no one really use it :laugh: Who care, I build it for myself :laugh:
I just try but i'm not an advance user. then i don't know any issue too much but everything work smooth.
ketut.kumajaya said:
So, this recovery so perfect. 54 download almost without any feedback. No feedback = no complain = no issue or no one really use it :laugh: Who care, I build it for myself :laugh:
Click to expand...
Click to collapse
I think everyone is waiting for your final custom kernel release!
In my opinion, is the best TWRP . Everything works fast and smooth. Greate work. How can I use aroma manager on this TWRP??
I just unlocked new phone, put yours on and installed CM13 without any problems. Touch screen is also responsive right away. Great job, thanks!
kecik18 said:
In my opinion, is the best TWRP . Everything works fast and smooth. Greate work. How can I use aroma manager on this TWRP??
Click to expand...
Click to collapse
Download aromafm-2.00b7.zip from https://github.com/amarullz/AROMA-Filemanager/releases and run it like you flash a zip in TWRP.
solis_f said:
I think everyone is waiting for your final custom kernel release!
Click to expand...
Click to collapse
Not sure, still focus on ROM build.
ketut.kumajaya said:
Download aromafm-2.00-b6.zip from https://github.com/amarullz/AROMA-Filemanager/releases and run it like you flash a zip in TWRP.
Click to expand...
Click to collapse
thx
kecik18 said:
thx
Click to expand...
Click to collapse
Sorry, I mean aromafm-2.00b7.zip .
Huh, 64bit ROM need more time to build, need more space. One error so far, quick fix applied, just found a proper fix in bullhead kernel source
LineageOS 15.1 for the H830 (LG G5)
Code:
*** Disclamer
I am not responsible for any damage that happens to your phone
What's this?
-- Its a slightly unstable build of LineageOS without any mods for the T-Mobile H830. To get charging to work, you must enable adb debugging in the developer menu of the settings app.
Click to expand...
Click to collapse
Installation instructions
-- Download ROM from link and do a clean flash in TWRP
* -- (optional) install GAPPS
Click to expand...
Click to collapse
Download
-- DOWNLOAD
https://mega.nz/#!kvYkibLA!TCrvx-teeoM1lJ4LuKkjIwepbOMYDCfd3lHy3m0q5xA
Click to expand...
Click to collapse
Credits
-- LineageOS Team and the many contributers to the ROM
-- @Rashed97 for his contribution for the G5's progress
Click to expand...
Click to collapse
Source
https://github.com/LineageOS
Click to expand...
Click to collapse
XDA:DevDB Information
LineageOS 15.1 for the LG G5, ROM for the LG G5
Contributors
AutinDroid, Lineageos Team and everybody who contributed to its source
ROM OS Version: 8.x Oreo
Version Information
Status: Testing
Created 2017-12-26
Last Updated 2018-05-03
FAQ
What's broken?
-- Wifi, Quickcharge, Camera, NFC, Bluetooth, and probably a lot of other things I haven't tested.
What's not broken?
-- The built in voice recorder app is broken, but microphone works. Audio is all good.
How stable is the ROM?
-- Very unstable, crashes time to time, is pretty slow, gets pretty warm; in other words, its pretty bad.
What's special about this ROM?
-- It's just Oreo, vanilla lineageOS. Only thing I added was the always on display from the Pixel 2.
Why is X not working?
-- Because its broken.
Plz fix X
-- I'll try, but probably won't be able to
Click to expand...
Click to collapse
What's comming?
-- I'll be doing another build, hopefully will fix some issues (not guaranteed)
Also, if anybody with more knowledge about ROM development could help, that would be great.
the link is broken!!!!!
Phong phamj said:
the link is broken!!!!!
Click to expand...
Click to collapse
Fixed
probably it will take a few months to fix all the bug but eh, we waited this far anyway
It is a nice christmas present. Thx for doing it =)
any one tried this rom???
some screen shots??
rock-2 said:
any one tried this rom???
some screen shots??
Click to expand...
Click to collapse
i tried it. it look great, oreo is really beautiful but like the man said, rom is still buggy so wait for the next build to fix
Great work man, keep it up! Is there any chance of a H850 version of this build in the future?
Deltachrome said:
Great work man, keep it up! Is there any chance of a H850 version of this build in the future?
Click to expand...
Click to collapse
My computer is broken rn, but in the near future I can make a h850 build
you seem to be the only developer who care to bring us oreo. you should be praised as god
AutinDroid said:
Fixed
Click to expand...
Click to collapse
It looks like the link is broken again.
black metallic said:
you seem to be the only developer who care to bring us oreo. you should be praised as god
Click to expand...
Click to collapse
Holy, thx but no, I am not a proper developer to build 8.0, I can compile Android and fix errors, but I lack the fundamental skills in order to debug and fix problems. I am trying to learn how to fix broken functions, but it's going to be a long time till I will be able to be sufficient in Android development. I believe that for now, other devs such as Rashed should continue to support the devices, and I appreciate their hard work to bring Oreo to Android. As a matter of fact,all credit should go to these devs, not me. Also, I have one build that is half compiled, may fix wifi, but idk. Also link has been fixed (must have not fixed it properly)
Any chance to port this to RS988?
One day... Shortly after i am finished learning a new language i will be teaching myself rom building and will help... Provided i am still alive.....
If someone wants to check it out on h850...
https://drive.google.com/folderview?id=0B-9XEdE1L6Q1ZEVwdkhlNGthRDA
gismo2004 said:
If someone wants to check it out on h850...
https://drive.google.com/folderview?id=0B-9XEdE1L6Q1ZEVwdkhlNGthRDA
Click to expand...
Click to collapse
Can you say something about the Rom on H850 ?
PrinceLc said:
Can you say something about the Rom on H850 ?
Click to expand...
Click to collapse
Well, it's booting
I didn't tested a lot! I know that wlan, phone calls and Livedisplay is working.
Snap is crashing, but have not tested other cams...
I just have installed it to check out 8.1 and see what's different. Unfortunately I need my h850 for work, so I switched back to stable.
Will test more this week.
Cheers
gismo2004 said:
Well, it's booting
I didn't tested a lot! I know that wlan, phone calls and Livedisplay is working.
Snap is crashing, but have not tested other cams...
I just have installed it to check out 8.1 and see what's different. Unfortunately I need my h850 for work, so I switched back to stable.
Will test more this week.
Cheers
Click to expand...
Click to collapse
Okay thanks for the info and good luck for maybe a stable version
gismo2004 said:
If someone wants to check it out on h850...
https://drive.google.com/folderview?id=0B-9XEdE1L6Q1ZEVwdkhlNGthRDA
Click to expand...
Click to collapse
Tried installing it on my H850 but ended with : updater process ended with error 7 ; error instaling etc..
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
One of the Finest and Oldest Kernel for Redmi Note 7 Pro. Stability alongwith ultra-smooth performance for daily tasks and performance - battery friendly Kernel for everyone to enjoy.
Built with Azure Clang 15 + Link Time Optimization for maximum performance + efficiency for your lovely device.
Each releases experiences a rigorous testing to avoid any regressions.
Click to expand...
Click to collapse
Release Information ( Features + Wiki + Compatibility )
Everything related to the bracketed topics can be found at Github.
Features + Changelogs - https://github.com/Panchajanya1999/msm-4.14/releases/tag/Fourteenth
Q isn't supported at XDA anymore. It's all about R and S
Click to expand...
Click to collapse
Download
Download the build from the link shared below
NOTE: Build Date may be 1 day old (Tested Builds)
Direct Download Link
Click to expand...
Click to collapse
Telegram References
Telegram Group - https://t.me/azure_violet
Telegram Channel - https://t.me/azure_ci
Click to expand...
Click to collapse
Meta
- Toolchain: Azure Clang 15 (subject to updates)
- Toolchain (companion): GCC 11.2
- Main branch: R
Click to expand...
Click to collapse
Donations
I do not get paid for anything I do. Yet, not a single thing is free in this world. I build on top-tier servers, which aren't free. So, if u like my work, consider buying me a Coffee / Soft-drinks !
UPI : [email protected] | [email protected]
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Everyone who authored the commits
* Whole Testing Group Buddies
XDA:DevDB Information
azure Kernel, Kernel for the Xiaomi Redmi Note 7 Pro
Contributors
Panchajanya1999
Source Code: https://github.com/Panchajanya1999/msm-4.14.git
Kernel Special Features: Stable and Latest Kernel with useful features
Version Information
Status: Stable
Current Stable Version: Twelfth
Stable Release Date: 2022-02-22
Created 2019-07-02
Last Updated 2022-02-22
Steps For Flashing On Stock AOSP Recovery
ADB Sideload works totally fine. If you are rooted, use Franco Kernel Manager.
Reserved
I was just thinking to request for a custom kernel..Thankyou man!
Gonna flash rn
RVSingh said:
I was just thinking to request for a custom kernel..Thankyou man!
Gonna flash rn
Click to expand...
Click to collapse
Go Ahead
Panchajanya1999 said:
Go Ahead
Click to expand...
Click to collapse
Using bootlegers rom .After flashing at first phone got stuck at boot animation but then i rebooted into recovery by pressing keys and then to system.Now its Working fine.Will Post If a face any problem.
Thankyou for your work bro
RVSingh said:
Using bootlegers rom .After flashing at first phone got stuck at boot animation but then i rebooted into recovery by pressing keys and then to system.Now its Working fine.Will Post If a face any problem.
Thankyou for your work bro
Click to expand...
Click to collapse
Which Recovery????
Sent from my Redmi Note 7 Pro using Tapatalk
Panchajanya1999 said:
Which Recovery????
Click to expand...
Click to collapse
Peter's
Anybody tested this on MIUI?
Naveenthemi said:
Anybody tested this on MIUI?
Click to expand...
Click to collapse
Won't boot on MIUI.
Either stick with stock kernel or flash custom ROMs
Panchajanya1999 said:
Won't boot on MIUI.
Either stick with stock kernel or flash custom ROMs
Click to expand...
Click to collapse
Ugh..thanks anyways..
I have to ask, when I install a new rom (clean install) do I need to boot first or I can just flash it before magisk and after GAPPS?
justboryata said:
I have to ask, when I install a new rom (clean install) do I need to boot first or I can just flash it before magisk and after GAPPS?
Click to expand...
Click to collapse
Boot first
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
Can I flash over OOS gsi? Which recovery is recommended?
mj25m said:
Can I flash over OOS gsi? Which recovery is recommended?
Click to expand...
Click to collapse
You can
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
Bro any chance you could make one for miui....Appreciate your work...Thnaks
24likan said:
Bro any chance you could make one for miui....Appreciate your work...Thnaks
Click to expand...
Click to collapse
Till xiaomi updates source, I can't
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
justboryata said:
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
Click to expand...
Click to collapse
It is a common problem , try F1xy kernel until this is fixed , we had created a work around on F1xy , because i had already reported this problem like one month ago.
justboryata said:
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
Click to expand...
Click to collapse
Yea,
This is an issue right now,
Will be fixed in next update tho.
There will be a new thing on next update tho. I m working on it...!!!
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs