CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*
Introduction
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Click to expand...
Click to collapse
Installation instructions
First time installing CyanogenMod 13.0 to your Galaxy S3 I9305, or coming from another ROM:
- Read known issues ans FAQs
- Flash one of the recovery images (CWM or TWRP)
- Copy GApps and CM13.0 ZIPs to your SDCard
- Boot into Recovery
- Flash CM13.0 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 13.0:
- Copy CM13.0 ZIP to your SDCard
- Boot into Recovery
- Flash CM13.0 zip from SDCard
- Reboot
Click to expand...
Click to collapse
Download
Project Link
Click to expand...
Click to collapse
Changelog
Code:
Current changelog: -- 19/11/2015
Initial Release
Click to expand...
Click to collapse
Working:
Wifi
Camera
Nfc turns on dont know if it works
Click to expand...
Click to collapse
Not Working:
RIL
External SdCard (causes bootloops)
You tell me???
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Google
* Cyanogenmod team
* Samsung for making it damn hard to compile for this device
please note to get this to boot you need to remove your sdcard
Screenshot? *-*
daviidbarco said:
Screenshot? *-*
Click to expand...
Click to collapse
It looks the same as lollipop :s
Sent from my GT-I9305 using XDA Forums
Marshmellow is in the house!
Please dont stop working on Cm12.1.
Buy the way how much faster is then the Cm12.1?
Sources?
ZjemCiKolege said:
Sources?
Click to expand...
Click to collapse
RIL not working meant that the sim card isn't working?
yes, no mobile data atm
Good news, I keep my fingers crossed for your Marshmy'. I hope there will be working MMS (weak point of lollipops) and other stuff in (near) future. Then I'll be completely satisfied
PS. Fix thread name - MarsHmallow, not Marsmallow.
Sectorian said:
Please dont stop working on Cm12.1.
Buy the way how much faster is then the Cm12.1?
Click to expand...
Click to collapse
It will work much faster than 5.1.1. It just need a lot of work
Wysłane z mojego GT-I9305 przy użyciu Tapatalka
Sectorian said:
Please dont stop working on Cm12.1.
Buy the way how much faster is then the Cm12.1?
Click to expand...
Click to collapse
Cm 12.1 is just about finished with the cm team. It hardly gets updated now
Sent from my GT-I9305 using XDA Forums
I will do another build when I get home from work to see if enabling selinux in permissive will cause bootloop
Sent from my GT-I9305 using XDA Forums
which is the difference between this version and the lollipop ? what's new in this version?
daviidbarco said:
which is the difference between this version and the lollipop ? what's new in this version?
Click to expand...
Click to collapse
Uhm... Lollipop was lollipop, Marshmallow is marshmallow? Seriously? How about you google this ? What type of question is this ?
What's the difference between windows 8 and windows 10 ?
Anyhow, @winxuser:
Thank you very much for not leaving us
daedric said:
Uhm... Lollipop was lollipop, Marshmallow is marshmallow? Seriously? How about you google this ? What type of question is this ?
What's the difference between windows 8 and windows 10 ?
Anyhow, @winxuser:
Thank you very much for not leaving us
Click to expand...
Click to collapse
Haha well I'm trying my best to stay ATM. The phone repair shop has had my g3 for 3 weeks now and I still haven't heard back from him.. He is usually pretty quick with phone repairs.. I must of really damaged the efs and modem partitions
Sent from my GT-I9305 using XDA Forums
winxuser said:
Haha well I'm trying my best to stay ATM. The phone repair shop has had my g3 for 3 weeks now and I still haven't heard back from him.. He is usually pretty quick with phone repairs.. I must of really damaged the efs and modem partitions
Sent from my GT-I9305 using XDA Forums
Click to expand...
Click to collapse
Ha, we really give a job to the phone repair guys . Also, I've found some new things in your build:
1) Dialer is finally not causing any lag while opening the numbers menu.
2) Trying to unlock the phone causes a bootloop - every time.
limnaln said:
Ha, we really give a job to the phone repair guys . Also, I've found some new things in your build:
1) Dialer is finally not causing any lag while opening the numbers menu.
2) Trying to unlock the phone causes a bootloop - every time.
Click to expand...
Click to collapse
I confirm above. The issue of bootloop when trying to unlock the phone ia very annoying
Hi,
good job. Could you, please, provide source code for android_device_samsung_i9305? Or am I missing something and it is already available somewhere? I`d like to try my own build and some debugging.
Thanks
daedric said:
Uhm... Lollipop was lollipop, Marshmallow is marshmallow? Seriously? How about you google this ? What type of question is this ?
What's the difference between windows 8 and windows 10 ?
Anyhow, @winxuser:
Thank you very much for not leaving us
Click to expand...
Click to collapse
hahahahahahahaahaha. yessssss! what is the difference lollipop rom and marshmallow rom? hahah
Related
UNOFFICIAL CyanogenMod 12.1 for KOR Galaxy S5 LTE-A X3
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
This ROM is ONLY for SM-G906S/K/L, Korean Galaxy S5 LTE-A X3 [Snapdragon 805].
This Project is WIP Project.
If you can help me, please contact to me.
E-mail : [email protected]
This ROM supports ONLY new Lollipop bootloader.
Please update to samsung official lollipop firmware via odin.
CHANGELOG :
2015.05.18
- Separate thread
Not Working List :
.
CREDITS
@arter97
@skvalex
DONATIONS
Donate to @arter97 : http://forum.xda-developers.com/donatetome.php?u=4898097
Donate to @skvalex : https://callrecorder.skvalex.com/buy/howto.php
Donate to me : Paypal [email protected]
DOWNLOAD
http://fsrv1.sayanogen.com/S5LTEAX3/
Please don't make mirror links.
OPENSOURCE
https://github.com/sktjdgns1189
Great work as always from Sunghun! Thank you for always putting in a lot of effort in helping us develop our devices firmware!
Yes thank you also for your hard work. I hope you are ready for Android M
So anyone on the latest 12.1 from 25th May yet? How is it looking? What bugs are you experiencing?
Thanks in advance for any input!
Sent from my SM-G906K using XDA Free mobile app
JUST dl'd the latest 12.1 Nightly But im still on VN ROM. for the moment. will update once back on CM12.1 ROM SINCE IM EXPERIENCING Serious Battery Drain from VN ROM
THANKS
ZAC
zac69000 said:
JUST dl'd the latest 12.1 Nightly But im still on VN ROM. for the moment. will update once back on CM12.1 ROM SINCE IM EXPERIENCING Serious Battery Drain from VN ROM
THANKS
ZAC
Click to expand...
Click to collapse
I'm on VN-ROM too, and yes, it's a battery drainer... What app do you recommend to backup all my apks and data to try this CM 12.1 and not lose all my things...?
404 Not Found when i try to go to the link. Do you have the second link?!
This rom had Vietnamese?
(sr for bad En )
newhalo214 said:
404 Not Found when i try to go to the link. Do you have the second link?!
This rom had Vietnamese?
(sr for bad En )
Click to expand...
Click to collapse
Server maintenance in progress.
http://home.sunggu.me/
Audioboxer said:
Server maintenance in progress.
http://home.sunggu.me/
Click to expand...
Click to collapse
Can you tell me about battery? How well does the CM 12.1? I'm on VN-ROM but it's a battery drainer...
Audioboxer said:
Server maintenance in progress.
http://home.sunggu.me/
Click to expand...
Click to collapse
no server is responding... any alternative link available?
Downloaded it since yesterday. Liking it so far.
weedlucho said:
Can you tell me about battery? How well does the CM 12.1? I'm on VN-ROM but it's a battery drainer...
Click to expand...
Click to collapse
slymester123 said:
Downloaded it since yesterday. Liking it so far.
Click to expand...
Click to collapse
Just flashed this ROM, enjoying it very much so far.
Especially loving the ability to root/unroot from within the ROM, no need to flash auto root!
Cannot yet confirm the battery life though my device does get hot relatively quickly.
Great work @sktjdgns1189 - donation on its way!
EDIT: Bugs found:
1 - mobile hotspot isn't working. Bluetooth tethering works okay.
[Seems to be fixed in nightly 20150601]
2 - Wi-Fi connection drops randomly and doesn't reconnect. (Doesn't occur too often)
3 - settings buttons from notification panel sometimes irresponsible. Need to go into free settings setup menus in order to change the desired feature.
4 - when making video through any camera app there is no voice capture. I can see the movie playback but there's no sound.
http://home.sunggu.me/cm-12.1-20150601-UNOFFICIAL-lentislteskt.zip
ad0dh67 said:
http://home.sunggu.me/cm-12.1-20150601-UNOFFICIAL-lentislteskt.zip
Click to expand...
Click to collapse
Thanks, do you know where I find the change log?
EDIT: very very unreliable server... doesn't let download.
sktjdgns1189 said:
UNOFFICIAL CyanogenMod 12.1 for KOR Galaxy S5 LTE-A X3
Click to expand...
Click to collapse
Hi @sktjdgns1189, the server is totally down, are there any alternatives please?
weedlucho said:
I'm on VN-ROM too, and yes, it's a battery drainer... What app do you recommend to backup all my apks and data to try this CM 12.1 and not lose all my things...?
Click to expand...
Click to collapse
u could try "Titainuim Backup Pro" or"ROMTOOLBOX PRO", TB Is Probley Better for you.. and Also "Nandroid Backup Pro" is what i use
---------- Post added at 12:43 AM ---------- Previous post was at 12:31 AM ----------
ad0dh67 said:
http://home.sunggu.me/cm-12.1-20150601-UNOFFICIAL-lentislteskt.zip
Click to expand...
Click to collapse
thanks!!! Just downloaded it only took 7 mins link works fine.
zac69000 said:
u could try "Titainuim Backup Pro" or"ROMTOOLBOX PRO", TB Is Probley Better for you.. and Also "Nandroid Backup Pro" is what i use
---------- Post added at 12:43 AM ---------- Previous post was at 12:31 AM ----------
thanks!!! Just downloaded it only took 7 mins link works fine.
Click to expand...
Click to collapse
Finally I could download and flash. I have a feeling the ROM became more stable than the previous release.
I keep updating the bugs list in post #13 above, inviting everyone to report your finding, happy to consolidate in my post for keeping an easy track of issues.
excellent glad to hear it ive still not got round to copying it over to my SD Card lol... think i will do it now
zac69000 said:
excellent glad to hear it ive still not got round to copying it over to my SD Card lol... think i will do it now
Click to expand...
Click to collapse
Yeah that's why I always download directly to my phone as I never get to moving files from pc to smartphone
Hope there'll be further updates/fixes to the ROM as lack of video sound is really frustrating
CyanogenMOD 14.1 for falcon
README
1. Don't report bugs/battery usage/performance: they will be fixed in new CM builds.
2. For the broken things wait for Luk1337, luca020400 and Gabriel M to fix them.
3. I am noob so don't ask me things like include apps or fix something.
4. It's an early build
5. If you have questions you post in this thread
6. I will make new builds if there is a new fix or stuff like that.
7. Enjoy !
Install instructions:
1. Flash the .zip file using TWRP.
2. Flash open gapps
3. Enjoy !
DOWNLOAD:
AFH
https://www.androidfilehost.com/?fid=385035244224388939
Working:
- Display
- GPU
- CPU
- RIL (Mobile Data & SMS)
- Sound & Vibration
- GPS & compass
- Installing apps using Play Store
- short: everything is working (I think)
HUGE THANKS TO: luca020400, Luk1337, Gabriele M, Matthias Y, Cyanogen, Google, men_in_black007 (On IRC), DevUt (On IRC) and other people that I can't remember that helped me to build this
Sources:
https://github.com/CyanogenMod/android_device_motorola_falcon
https://github.com/CyanogenMod/android_kernel_motorola_msm8226
https://github.com/CyanogenMod/android_device_motorola_msm8226-common
You made it!
????
Enviado desde mi XT1008 mediante Tapatalk
BryanByteZ said:
You made it!
Click to expand...
Click to collapse
I made it but a lot of things are broken. If everyone is lucky including me...A new build will come in a few hours...
thanks bro <3
willizambrano01 said:
thanks bro <3
Click to expand...
Click to collapse
Don't thank me yet, beacuse it's buggy when it comes to booting on my device. sometimes it boots sometimes not.
Eurofighter_ty said:
Don't thank me yet, beacuse it's buggy when it comes to booting on my device. sometimes it boots sometimes not.
Click to expand...
Click to collapse
do not worry, the idea is to start, that's something
willizambrano01 said:
do not worry, the idea is to start, that's something
Click to expand...
Click to collapse
I don't promise but a new build will come in a few hours. if everything goes well.
Can you try to build for moto g 2014 too? (They have same hardware specs)
Zenzero
Good job bro! Glad you got the build up and running. Hope things get fixed and I'll try to commit next weekend, if I have time.
I have a Moto G as secondary device. If you want I can try new builds or anything else.
cris_webb said:
I have a Moto G as secondary device. If you want I can try new builds or anything else.
Click to expand...
Click to collapse
If there are new builds I am going to post here
Nice bro...
Screenshots?
Sent from my falcon using XDA-Developers mobile app
good job
thanks, great job!!!!
Stock at select language
Sent from my Moto G using XDA-Developers mobile app
itsdetavp said:
Stock at select language
Sent from my Moto G using XDA-Developers mobile app
Click to expand...
Click to collapse
if it also happens to me, not moving
itsdetavp said:
Stock at select language
Sent from my Moto G using XDA-Developers mobile app
Click to expand...
Click to collapse
willizambrano01 said:
if it also happens to me, not moving
Click to expand...
Click to collapse
You need to replace the build.prop file in order to get around this.
please
Eurofighter_ty said:
You need to replace the build.prop file in order to get around this.
Click to expand...
Click to collapse
as a replacement file using the recovery ? please as I am newbie
luisfelipevides said:
as a replacement file using the recovery ? please as I am newbie
Click to expand...
Click to collapse
Yes, you copy the build.prop file from sd card to the system partition.
I bring you Kali Nethunter based on Oreo.
More info about NetHunter:
https://www.kali.org/kali-linux-nethunter/
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
Installation:
0) Download (See downloads)
1) Flash on top of your favourite rooted Oreo ROM
2) Open Nethunter app
3) Grant permissions and root permission
4) Enjoy
Bugs:
You tell me
Thanks:
adekboreanaz for Stormguard kernel on which this is based
XDA:DevDB Information
Kali Nethunter, Tool/Utility for the Xiaomi Redmi Note 4
Contributors
Mister-v, Mister-v, adekboreanaz
Version Information
Status: Beta
Current Beta Version: 0.1
Beta Release Date: 2017-12-19
Created 2017-12-20
Last Updated 2017-12-20
Reserved
Reserved
PS. I wanna start building ROMs from source again, but which ROM is still missing for our Mido?
Any features?
Mister-v said:
Reserved
PS. I wanna start building ROMs from source again, but which ROM is still missing for our Mido?
Click to expand...
Click to collapse
Please work on Mi A1 port rom for mido.
Your work will be really appreciated.
And also give updates.
Monitor mode works ? And external WiFi cards ?!
which version of Stormguard kernel, it has ?
Resurrection Remix Oreo ?? ??
Mister-v said:
Reserved
PS. I wanna start building ROMs from source again, but which ROM is still missing for our Mido?
Click to expand...
Click to collapse
I think every one could agree with me on this. RR is the best nougat rom out there for majority. Life without RR oreo is depressing, seriously. We shall be eternally grateful for your services ??
usamaiqbal1177 said:
I think every one could agree with me on this. RR is the best nougat rom out there for majority. Life without RR oreo is depressing, seriously. We shall be eternally grateful for your services ??
Click to expand...
Click to collapse
We already got lot of RRs. It will surely be on Oreo. There are tons of ROMs which never builded.
Mister-v said:
Reserved
PS. I wanna start building ROMs from source again, but which ROM is still missing for our Mido?
Click to expand...
Click to collapse
AOSP-CAF
Pure Nexus
PAC - ROM
Beanstalk
LiquidSmooth
Bliss ROM
HalogenOS
Carbon
GlazeOS
VertexOS
Pure Fusion
AquariOS
...
And the list goes on. Some of them never builded, some of them builded just 1-2 times and discontinued. Instead of keep copying Lineage & RR. These are would be great.
And Nougat builds will do better I think. Since Oreo isn't fully stable & ROMs don't have all customizations. But It's okay to have newer, not a big deal it's Nougat or Oreo. Thanks for NetHunter BTW.
Can u plz make only kernel.zip and we can download the full/minimal kalifs ??
nogee said:
which version of Stormguard kernel, it has ?
Click to expand...
Click to collapse
3.0
Installed. Not a single thing works, so sad reverting back.
MaD HaCkr said:
Monitor mode works ? And external WiFi cards ?!
Click to expand...
Click to collapse
+1
Sent from my Redmi Note 4 using Tapatalk
newintage said:
3.0
Installed. Not a single thing works, so sad reverting back.
Click to expand...
Click to collapse
Can u tell the bugs ?
MaD HaCkr said:
Can u the bugs ?
Click to expand...
Click to collapse
The bugs ?
A lot of apps force closing. Nethunter sections are stucking/freezing. Impossible to do anything.
Nothing works!!!1
cant find the download link anywhere for the device , help!
Does external wifi detects??
PCIHD said:
cant find the download link anywhere for the device , help!
Click to expand...
Click to collapse
same here
Nethunter kernel for mido oreo
I'm sorry I can't find the download link
Mister-v said:
Reserved
PS. I wanna start building ROMs from source again, but which ROM is still missing for our Mido?
Click to expand...
Click to collapse
Dirty Unicorns Nougat will be a great choice. Aside from it is one of the best ROM, it was last updated October. Somehow you can help us getting latest security patch. I think many users will be happy with this.
Oreo roms were popping out of nowhere I just can't name any as of the moment. List mentioned by @newintage are good roms.
Would anyone be kind enough to hook me up with the download link? Cheers!
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
One of the Finest and Oldest Kernel for Redmi Note 7 Pro. Stability alongwith ultra-smooth performance for daily tasks and performance - battery friendly Kernel for everyone to enjoy.
Built with Azure Clang 15 + Link Time Optimization for maximum performance + efficiency for your lovely device.
Each releases experiences a rigorous testing to avoid any regressions.
Click to expand...
Click to collapse
Release Information ( Features + Wiki + Compatibility )
Everything related to the bracketed topics can be found at Github.
Features + Changelogs - https://github.com/Panchajanya1999/msm-4.14/releases/tag/Fourteenth
Q isn't supported at XDA anymore. It's all about R and S
Click to expand...
Click to collapse
Download
Download the build from the link shared below
NOTE: Build Date may be 1 day old (Tested Builds)
Direct Download Link
Click to expand...
Click to collapse
Telegram References
Telegram Group - https://t.me/azure_violet
Telegram Channel - https://t.me/azure_ci
Click to expand...
Click to collapse
Meta
- Toolchain: Azure Clang 15 (subject to updates)
- Toolchain (companion): GCC 11.2
- Main branch: R
Click to expand...
Click to collapse
Donations
I do not get paid for anything I do. Yet, not a single thing is free in this world. I build on top-tier servers, which aren't free. So, if u like my work, consider buying me a Coffee / Soft-drinks !
UPI : [email protected] | [email protected]
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Everyone who authored the commits
* Whole Testing Group Buddies
XDA:DevDB Information
azure Kernel, Kernel for the Xiaomi Redmi Note 7 Pro
Contributors
Panchajanya1999
Source Code: https://github.com/Panchajanya1999/msm-4.14.git
Kernel Special Features: Stable and Latest Kernel with useful features
Version Information
Status: Stable
Current Stable Version: Twelfth
Stable Release Date: 2022-02-22
Created 2019-07-02
Last Updated 2022-02-22
Steps For Flashing On Stock AOSP Recovery
ADB Sideload works totally fine. If you are rooted, use Franco Kernel Manager.
Reserved
I was just thinking to request for a custom kernel..Thankyou man!
Gonna flash rn
RVSingh said:
I was just thinking to request for a custom kernel..Thankyou man!
Gonna flash rn
Click to expand...
Click to collapse
Go Ahead
Panchajanya1999 said:
Go Ahead
Click to expand...
Click to collapse
Using bootlegers rom .After flashing at first phone got stuck at boot animation but then i rebooted into recovery by pressing keys and then to system.Now its Working fine.Will Post If a face any problem.
Thankyou for your work bro
RVSingh said:
Using bootlegers rom .After flashing at first phone got stuck at boot animation but then i rebooted into recovery by pressing keys and then to system.Now its Working fine.Will Post If a face any problem.
Thankyou for your work bro
Click to expand...
Click to collapse
Which Recovery????
Sent from my Redmi Note 7 Pro using Tapatalk
Panchajanya1999 said:
Which Recovery????
Click to expand...
Click to collapse
Peter's
Anybody tested this on MIUI?
Naveenthemi said:
Anybody tested this on MIUI?
Click to expand...
Click to collapse
Won't boot on MIUI.
Either stick with stock kernel or flash custom ROMs
Panchajanya1999 said:
Won't boot on MIUI.
Either stick with stock kernel or flash custom ROMs
Click to expand...
Click to collapse
Ugh..thanks anyways..
I have to ask, when I install a new rom (clean install) do I need to boot first or I can just flash it before magisk and after GAPPS?
justboryata said:
I have to ask, when I install a new rom (clean install) do I need to boot first or I can just flash it before magisk and after GAPPS?
Click to expand...
Click to collapse
Boot first
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
Can I flash over OOS gsi? Which recovery is recommended?
mj25m said:
Can I flash over OOS gsi? Which recovery is recommended?
Click to expand...
Click to collapse
You can
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
Bro any chance you could make one for miui....Appreciate your work...Thnaks
24likan said:
Bro any chance you could make one for miui....Appreciate your work...Thnaks
Click to expand...
Click to collapse
Till xiaomi updates source, I can't
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
justboryata said:
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
Click to expand...
Click to collapse
It is a common problem , try F1xy kernel until this is fixed , we had created a work around on F1xy , because i had already reported this problem like one month ago.
justboryata said:
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
Click to expand...
Click to collapse
Yea,
This is an issue right now,
Will be fixed in next update tho.
There will be a new thing on next update tho. I m working on it...!!!
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
Code:
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Introduction
This is the LineageOS 20for S20FE Snapdragon
This rom is far from done and im working pretty hard to fix it since i got the phone
Click to expand...
Click to collapse
Installation instructions
1. Install TWRP and patches VBMETA by afaneh92
2. Flash the zip inside of TWRP
3. Reboot recovery
4. Flash Gapps and any mod you like
4. Select reboot -> reboot to fastboot
6. flash the wifi fix kernel with fastboot flash boot pathtodownloadedbootimghere
Click to expand...
Click to collapse
Download
ROM
Click to expand...
Click to collapse
Changelog
Code:
Current changelog:07.12.2022
[note] 1st Release of Lineage 20.0
[new] Android 13 T
[changed]
[fixed] Rom boots into OS
Older changelogs:
Click to expand...
Click to collapse
FAQ
What works?
Wifi
Bluetooth
Usb
Camera
Fingerprint sensor
Reverse wireless charging
120hz display
MDNI
Audio
RIL
Stereo speaker
Microfone
Click to expand...
Click to collapse
What doesnt work ?
Sensors
Microphone and earpiece and speakers in calls
Macro lense and other fancy cams only main and front work right now
You tell me
This is only for Snapdragon S20FE not for exynos also not for S20 non fe
VOLTE DONT WORK AND IT WONT EVER WORK
For Gapps i recommend NikGapps
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@SGCMarkus
@Simon1511
@RaviJavaDeveloper
Sources
Code:
[URL="https://github.com/Samsung-sm8150-aosp]Repos[/URL]
awesome
Hi, in the installation instructions for the wifi fix kernel there is no link just pathtodownloadedbootimghere.
Thanks for this rom
I'm happy to see this is being developed. Thank you!
Good job thanks
link wifi fix kernel
GAPPS installed into nothing
Abandoned sorry im not smart enough
J0SH1X said:
Abandoned sorry im not smart enough
Click to expand...
Click to collapse
GAPPS installation failed without any google items
RockStor said:
GAPPS installation failed without any google items
Click to expand...
Click to collapse
becuase there is no free space for gapps on sytem partition cause you are not supposed to install gapps yet
J0SH1X said:
becuase there is no free space for gapps on sytem partition cause you are not supposed to install gapps yet
Click to expand...
Click to collapse
Ok, I understand
sad times
Please drop the boot.img for WIfi fix kernel
armeiz209 said:
Please drop the boot.img for WIfi fix kernel
Click to expand...
Click to collapse
the dev has quit the project. the 3rd dev to do so, 2 more are still working on things but I wouldn't get to hopeful.
3mel said:
the dev has quit the project. the 3rd dev to do so, 2 more are still working on things but I wouldn't get to hopeful.
Click to expand...
Click to collapse
OK, Thank you!
how is the work on its operation going impatiently waiting for a clean gp fate to finally get the power out of this phone to its full potential
J0SH1X said:
becuase there is no free space for gapps on sytem partition cause you are not supposed to install gapps yet
Click to expand...
Click to collapse
I was interested to get one for aosp developments, but this killed me. xD
What you know how dynamic partitions work ? i need to tell the system to add extra space for gapps which i did not do as youre not supposed to use this rom yet since like nothing works
haky 86 said:
I was interested to get one for aosp developments, but this killed me. xD
Click to expand...
Click to collapse
J0SH1X said:
What you know how dynamic partitions work ? i need to tell the system to add extra space for gapps which i did not do as youre not supposed to use this rom yet since like nothing works
Click to expand...
Click to collapse
I could make things works as well, I already did a stable oss with my a70 https://github.com/samsung-sm6150-devs. So I guess could do the same job on samsung's sm8250 if no one is working on it.
can't wait for the full working version . although it would be nice if, for example, the camera apaka or the sound from the voices were at the same level as originally