hi guys, this kernel is the same as cyanogenmod
with the only difference that this updated to the latest revision by the Linux Foundation and codeaurora/kk_2.7-stable
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I clarify that, not overlocked and is not compiled with Linaro (maybe in the future)
Install instruction:
S-OFF:
1 - Flash the zip in recovery
2 - Wipe Dalvik-Cache and Cache (Recomended)
Click to expand...
Click to collapse
S-ON:
1 - You have fastboot drivers on your computer, Windows or Linux/Mac/Chrome
2 - Download kernel
3 - Reset the device in bootloader mode
4 - Open Terminal or Command Console
5 - Type this (without quotes) : "fastboot flash boot (drag the image boot, the terminal or command console) press enter
.....Example: fastboot flash boot boot.img
6 - When finished, disconnect the cable from your device, now reboot in recovery
7 - Wipe Dalvik-Cache and Cache (Recomended), now reboot in system
8 - Congratulations!
Click to expand...
Click to collapse
note: this kernel is for the new fstab!
Donwloads: Tab downloads and mirror
Source: Github
XDA:DevDB Information
[KERNEL][KitKat][AOSP][3.4.97], Kernel for the AT&T HTC One X
Contributors
josegalre
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.4.97
Stable Release Date: 2014-07-06
Created 2014-07-06
Last Updated 2014-07-07
Changelog:
06/JULY/14
* Update to linux/3.4.97
05/JULY/14
* Update to linux/3.4.96
* Update to codeaurora/caf/kk_2.7_rb1.41
Click to expand...
Click to collapse
There's a small error in your s-on instructions. Step 5 says to type "fastboot flash recovery" when it should say "fastboot flash boot" instead. Just thought I'd let you know, most people know better but you're bound to get someone who flashes the boot.img to their recovery partition.
Sent from my Evita
timmaaa said:
There's a small error in your s-on instructions. Step 5 says to type "fastboot flash recovery" when it should say "fastboot flash boot" instead. Just thought I'd let you know, most people know better but you're bound to get someone who flashes the boot.img to their recovery partition.
Sent from my Evita
Click to expand...
Click to collapse
thanks for the correction, the match: Costa Rica vs netherlands distracts me!
josegalre said:
thanks for the correction, the match: Costa Rica vs netherlands distracts me!
Click to expand...
Click to collapse
No problems. It was a pretty good game, very closely matched.
Sent from my Evita
Might be a silly question, but does it support S2W ?
sagar_tiru2006 said:
Might be a silly question, but does it support S2W ?
Click to expand...
Click to collapse
I'm gonna go out on a limb here and say probably not, it's basically the stock CM kernel.
Sent from my Evita
sagar_tiru2006 said:
Might be a silly question, but does it support S2W ?
Click to expand...
Click to collapse
timmaaa said:
I'm gonna go out on a limb here and say probably not, it's basically the stock CM kernel.
Click to expand...
Click to collapse
I would like to know how to add this, because I like the idea, Someone knows how to do that?
I'm sure there are multiple guides floating around on XDA that should be able to instruct you.
Sent from my Evita
josegalre said:
I would like to know how to add this, because I like the idea, Someone knows how to do that?
Click to expand...
Click to collapse
Something like this I think.
I cant pass from my bootanimation,
Kernel: last version
S-Off
Paranoid Android ROM
I've Installed another Kernel, and happen the same, cant pass the bootanimation.
3.4.97 kernel is force closing the CM themes engine on latest PAC nightly.
Edit: Enclosed the Logcat
Sent from my One XL using XDA Free mobile app
Mexickano said:
Im cant pass from my bootanimation,
Kernel: last version
S-Off
Paranoid Android ROM
I've Installed another Kernel, and happen the same, cant pass the bootanimation.
Click to expand...
Click to collapse
Please clear the Cache and Dalvik, I am able to successfully boot with PAC ROM.
Mexickano said:
Im cant pass from my bootanimation,
Kernel: last version
S-Off
Paranoid Android ROM
I've Installed another Kernel, and happen the same, cant pass the bootanimation.
Click to expand...
Click to collapse
Please wipe dalvik-cache!
sathish804 said:
3.4.97 kernel is force closing the CM themes engine on latest PAC nightly.
Edit: Enclosed the Logcat
Sent from my One XL using XDA Free mobile app
Click to expand...
Click to collapse
curious! I have the latest weekly and it works! 'll check the logcat!
you wiped dalvik / cache?
E dalvikvm: Dex cache directory isn't writable: /data/dalvik-cache
clean data themes
Click to expand...
Click to collapse
josegalre said:
curious! I have the latest weekly and it works! 'll check the logcat!
you wiped dalvik / cache?
Click to expand...
Click to collapse
The latest one which I have downloaded is of 07/07 Nightly .. In your screen shot CM version is 05/07 but in mine it is 07/07
sathish804 said:
The latest one which I have downloaded is of 07/07 Nightly .. In your screen shot CM version is 05/07 but in mine it is 07/07
Click to expand...
Click to collapse
right so the photo title says weekly, with kernel 3.4.82 (nightly build) the theme engine works?
josegalre said:
right so the photo title says weekly, with kernel 3.4.82 (nightly build) the theme engine works?
Click to expand...
Click to collapse
I will test it and post you the results.
---------- Post added at 02:37 PM ---------- Previous post was at 02:19 PM ----------
josegalre said:
right so the photo title says weekly, with kernel 3.4.82 (nightly build) the theme engine works?
Click to expand...
Click to collapse
Tested with 3.4.82 and 3.4.96 both are not giving any error with themes engine.
Sent from my One XL using XDA Free mobile app
josegalre said:
Please wipe dalvik-cache!
Click to expand...
Click to collapse
I did it before, twice.
Sorry I forgot to mention before.
Mexickano said:
I did it before, twice.
Sorry I forgot to mention before.
Click to expand...
Click to collapse
the ROM you have used the new fstab?
Related
Hey guys, here is a flashable zip for the new Android 4.3 update.
Features
Still odexed to keep performance optimal
Rooted (Chainfire's special 4.3 SuperSU)
Busybox & Toolbox installed & symlinked
Added some useful tools such as vim, nano, openvpn, cpustats and more
Changed the boring nexus bootanimation to the Google Play edition devices animation
Downloads
GROUPER
Direct Download: http://d-h.st/aih - MD5 : 0e6d8b9f7039f73373680aafe4dd68d1
OR
Torrent: https://dl.dropboxusercontent.com/u/3856187/AOSP-4.3-JWR66V-grouper-rooted_Androguide.zip.torrent (thanks to @capcrunch)
TILAPIA
Direct Download: http://goo.im/devs/Androguide/Nexus7/Stock-Rooted-4.3/AOSP-4.3-JWR66V-tilapia-rooted_Androguide.zip
Instructions
Wipe /data, /cache & dalvik-cache (wiping /system is recommended, but not mandatory I guess)
Flash the ROM
If the recovery says the stock recovery might be flashed over and asks you to disable it, answer NO.
Reboot & Enjoy
Updating Bootloader/Radio
This is not mandatory.
If you want to update your bootloader or radio (radio is for tilapia only, obviously), here are the images:
Grouper:
bootloader: http://d-h.st/QFd
Tilapia
bootloader: http://d-h.st/4Gr
radio: http://d-h.st/XCW
You'll also need fastboot for your platform (just search on google or xda, or install the Android SDK).
I will not provide flashable zips for these as I do not believe it is safe to flash a bootloader via recovery (be it by using dd or by copying the raw image directly).
To update bootloader (replace XXX with grouper or tilapia depending on your model):
Code:
fastboot flash bootloader bootloader-[COLOR="DarkRed"]XXX[/COLOR]-4.23.img
To update radio
Code:
fastboot flash radio radio-tilapia-1231_0.18.0_0409.img
Tips
Titanium Backup users: Point TBU to /storage/emulated/legacy instead of /storage/emulated/0
If enough people request it I'll do the same for the 3G model.
Enjoy
First!!
Thank you!!!
EDIT:
I confirm the room is running very well and smooth
Great!
Will try it out now!
Thank you! :good:
Oh wow, not only are you amazing for putting this .zip together for us too lazy to figure out how to install the image itself, but if this keeps root, you are officially the best person in the world today. Many thanks.
Whitecookie said:
Will try it out now!
Thank you! :good:
Click to expand...
Click to collapse
The file is still uploading, please wait, there's about 10 minutes left
Wow, awesome.
Been waiting for this all day
Thanks!
What about new Bootloader version ? will this update the bootloader by itself ?
What were to happen if I flashed this on my 3G version ?
Sent from my Nexus 7 using xda premium
porkovich said:
What about new Bootloader version ? will this update the bootloader by itself ?
Click to expand...
Click to collapse
Nope, if you want to update your bootloader you'll need to fastboot it, I attached the new bootloader to this post if you need it.
The fastboot command is
Code:
fastboot flash bootloader bootloader-grouper-4.23.img
RohinZaraki said:
What were to happen if I flashed this on my 3G version ?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
It probably wouldn't boot until you flash a compatible rom
EDIT: actually, the updater-script wouldn't let you install it, it checks in your current build.prop if ro.product.board is set to grouper
Awesome, thanks!
RohinZaraki said:
What were to happen if I flashed this on my 3G version ?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I think it just won't install
How is this for grouper when Google doesn't call it grouper anymore? You sure this is the right ROM then?
Thanks
Sent from my Nexus 7 using Tapatalk 4 Beta
renildrah said:
How is this for grouper when Google doesn't call it grouper anymore? You sure this is the right ROM then?
Click to expand...
Click to collapse
Here is an excerpt from the 4.3 build.prop:
Code:
ro.product.name=nakasi
ro.product.device=grouper
The nakasi/grouper thing isn't new, it's always been this way.
And obviously I tested it before uploading --'
However, I made a mistake by using ChainsDD's superuser binary & apk, I just saw that Chainfire created a special version of SuperSU that works on 4.3 as it apparently has some new restrictions to get root access working.
So I am currently re-uploading the rom with working root courtesy of Chainfire. Sorry about that guys.
renildrah said:
How is this for grouper when Google doesn't call it grouper anymore? You sure this is the right ROM then?
Click to expand...
Click to collapse
I seriously doubt he would have posted a 3g (mobile) build for the grouper (wifi) .. I also wouldn't second guess someone nice enough to go out of their way to put this new flashable build out there for us either.. Make a backup, if it doesn't work, restore..
So flash the zip first then the bootloader in fastboot mode?
Link still says Uploading? Is it ready now?
VoiD_Dweller said:
I seriously doubt he would have posted a 3g (mobile) build for the grouper (wifi) .. I also wouldn't second guess someone nice enough to go out of their way to put this new flashable build out there for us either.. Make a backup, if it doesn't work, restore..
Click to expand...
Click to collapse
This. +1 if you have a doubt don't flash it.
And thanks for the fast fix Androguide we appreciate your work.
Sent from my Nexus 7 using Tapatalk 4 Beta
---------- Post added at 10:39 PM ---------- Previous post was at 10:38 PM ----------
facedown41 said:
Link still says Uploading? Is it ready now?
Click to expand...
Click to collapse
Please read. He's reuploading a new build with the superuser built for 4.3
Sent from my Nexus 7 using Tapatalk 4 Beta
Nevermind.
renildrah said:
Holy crap.. All I did was ask a couple of questions and THIS is the response I receive. Thanks for reminding me why I don't ask questions.
Click to expand...
Click to collapse
Well, TBF, it was kind of a silly question.
ZigZag Kernel
Disclaimer:
Code:
#include
/*
* Your warranty is now void
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Note: Kernel is still in testing stage! Try at your own risk!
Features:
Zipped using anykernel2 by @osm0sis
Latest linux patches
F2FS
Frandom
Advanced TCP Congestion controls
More fixes to stuff, check git
Downloads: ZigZag builds
Credits:
Google
@Imoseyon
@savoca
@alucard_24: For some critical fixes
Changelogs on post #2
Enjoy people!
XDA:DevDB Information
ZigZag kernel, Kernel for the LG G5
Contributors
##W4TCH0UT##
Source Code: https://github.com/W4TCH0UT/ZZ_G5
Kernel Special Features:
Version Information
Status: Testing
Created 2016-05-04
Last Updated 2016-05-21
Changelogs
R1:
* Initial build
Thx a lot
Very interested in testing this! Anyone maybe could create flashable Stock kernel first for safety?
Thank you!
Sent from my LG-H850 using XDA Labs
---------- Post added at 05:22 PM ---------- Previous post was at 05:20 PM ----------
[/COLOR]
Lycidias said:
Very interested in testing this! Anyone maybe could create flashable Stock kernel first for safety?
Thank you!
Sent from my LG-H850 using XDA Labs
Click to expand...
Click to collapse
Yes its called flashify...download it in the play store and backup your kernel
Lycidias said:
Very interested in testing this! Anyone maybe could create flashable Stock kernel first for safety?
Thank you!
Sent from my LG-H850 using XDA Labs
Click to expand...
Click to collapse
Pphish20 said:
---------- Post added at 05:22 PM ---------- Previous post was at 05:20 PM ----------
[/COLOR]
Yes its called flashify...download it in the play store and backup your kernel
Click to expand...
Click to collapse
We have also flashable Stock Images!
Going to test this Kernel now... Thanks alot Dev! ?
I get error when trying to flash kernel :
Code:
Dumping/splitting image failed. Aborting...
[COLOR="Red"]Updater process ended with ERROR: 1
Error installing zip file 'sdcard/Download/ZZ_h850_R1.zip'[/COLOR]
Just me ??
I suggest using https://github.com/jcadduono/lazyflasher/tree/kernel-flasher rather than AnyKernel2, should be a tad bit more reliable on this device.
BTW - why not just fork from my stock-6.0.y branch and cherry-pick the KCAL and other patches you used? It probably would have been much easier....
Pinu'u said:
I get error when trying to flash kernel :
Code:
Dumping/splitting image failed. Aborting...
[COLOR="Red"]Updater process ended with ERROR: 1
Error installing zip file 'sdcard/Download/ZZ_h850_R1.zip'[/COLOR]
Just me ??
Click to expand...
Click to collapse
Can you post the full log?
EDIT: Oh wait, found the mistake. My fault.
Sorry for the inconvenience guys. The previous version which I uploaded was faulty.
I have uploaded the new fixed version, so please try that and lemme know if any error occurs during flash.
Cheers!
##W4TCH0UT## said:
Sorry for the inconvenience guys. The previous version which I uploaded was faulty.
I have uploaded the new fixed version, so please try that and lemme know if any error occurs during flash.
Cheers!
Click to expand...
Click to collapse
I will Test now and give feedback... Thanks!
Now zip flashes fine, phone boots up, but after a bit, it reboots and get stuck at lg logo.
adb logcat did spit out nothing
Pinu'u said:
Now zip flashes fine, phone boots up, but after a bit, it reboots and get stuck at lg logo.
adb logcat did spit out nothing
Click to expand...
Click to collapse
Flashed fine here also. But Kernel has not changed for me. Still LG Kernel... Booted up without Problems. But no ZigZag Kernel ?
strange ! after flashing kernel it takes quite some time till all is back up, and even i do nothing on the device, all of a sudden it reboots and gets stuck @ lg logo
I see kernel with kernel adiutor, but when i try to make a screenshot, it says something like "Cant take screenshot while moving data" , and after a bit it reboots
This is what happens to me.
System is lagging and rebooting.
Maybe something wrong with AnyKernel? My Bluetooth isn't working but Kernel Info says LG Kernel. Reflashing the Stock Kernel brings back Bluetooth for me...
So still flashing issues? Or is it related to the Kernel itself?
Hmm, strange, gotta remove the downloads, since nobody is having a stable device. I'm on vacation for a week, so after coming back, I'll work on this.
So closing this thread for now
Thanks for testing.
Cheers!
Sent from my Moto X using Tapatalk
New R1 version with @alucard_24 's fixes is up!
Please test it and lemme know if everything works!
Cheers!
##W4TCH0UT## said:
New R1 version with @alucard_24 's fixes is up!
Please test it and lemme know if everything works!
Cheers!
Click to expand...
Click to collapse
Just tested new r1 and it boots but system says that my external sd is damaged and needs to be formatted. So I'm back to Stock kernel for now. Extsd usable again on Stock, nothing lost
Edit: can't Enable Bluetooth anymore after flashing back to Stock kernel
Sent from my LG-H850 using XDA Labs
Lycidias said:
Just tested new r1 and it boots but system says that my external sd is damaged and needs to be formatted. So I'm back to Stock kernel for now. Extsd usable again on Stock, nothing lost
Edit: can't Enable Bluetooth anymore after flashing back to Stock kernel
Sent from my LG-H850 using XDA Labs
Click to expand...
Click to collapse
Well, BT problems continue to persist , that's a bummer, will have to see if its a module problem.
Sent from my Moto X using Tapatalk
Prk Kernel For Lenovo K6 / K6 Power
DISCLAIMER:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Some Kernel Features-
#1.1
Added Alucard Governor
net: Westwood+ Tweaks
Etc
#1.0
cpufreq: chill: Version 2.0
Added Wheatley governor
Added lionfish governor
Added IMPULSE governor
undervolt for our cpu, reduces heat, helps battery backup
Enable ADRENO IDLER
And many things :v
INSTALLATION STEPS:
Download correct version of Overload kernel
Make backup of system, boot in twrp
Now, wipe dalvik cache and cache
Flash the kernel zip and reboot
Enjoy
DOWNLOAD LINKS:
Download From Here
Source code:Github
Credit:
andip71
franciscofranco
frap129
Meninblack007
psndna88
renjian2
arter97
sultanqasim
karthick mostwanted
anarkia1976
myfluxi
DarkAbhi
XDA:DevDB Information
[KERNEL][Karate] [Prk Kernel] [Discontinued], Kernel for the Lenovo K6 / K6 Power
Contributors
ProPrk
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.1
Created 2017-10-12
Last Updated 2017-10-18
Reserved
select impulse gov in both big and small Cpu
and noop in I/o scheduler
For better battery life :v
Kindly mention if this kernel works only with custom roms 64bit or 32bit or works with Stock ROM Nougat too ??
Gonna try this. Is the kernel independent of the ROM? Can I use it with Lineage OS 15?
Woewww
[email protected] said:
Gonna try this. Is the kernel independent of the ROM? Can I use it with Lineage OS 15?
Click to expand...
Click to collapse
TESTED ON ROMS:
All Nougat Roms
Please Test it in Other Roms and Report it Below.
Harry_00s.HS said:
Kindly mention if this kernel works only with custom roms 64bit or 32bit or works with Stock ROM Nougat too ??
Click to expand...
Click to collapse
TESTED ON ROMS:
All Nougat Roms
Please Test it in Other Roms and Report it Below.
Forever Alone said:
Woewww
Click to expand...
Click to collapse
Nice trick to get thanks [emoji23][emoji23][emoji23]
Sent from my Pixel 2 XL using Tapatalk
Does not work on lineage OS 15, could not boot the phone anymore. After the initial lenovo splash screen, the phone lit up and dimmed again and again, and finally reboots to fastboot mode.
I know this isn't the place to discuss this issue but - why can't I unlock the pattern after a TWRP restore?
[email protected] said:
Does not work on lineage OS 15, could not boot the phone anymore. After the initial lenovo splash screen, the phone lit up and dimmed again and again, and finally reboots to fastboot mode.
I know this isn't the place to discuss this issue but - why can't I unlock the pattern after a TWRP restore?
Click to expand...
Click to collapse
Thanks for feedback will try make kernel to work in android O.
Never take backup with security lock
Sent from my Pixel 2 XL using Tapatalk
[email protected] said:
Does not work on lineage OS 15, could not boot the phone anymore. After the initial lenovo splash screen, the phone lit up and dimmed again and again, and finally reboots to fastboot mode.
I know this isn't the place to discuss this issue but - why can't I unlock the pattern after a TWRP restore?
Click to expand...
Click to collapse
I added support for android o ,u wanna try ?
I
Sent from my Pixel 2 XL using Tapatalk
ProPrk said:
I added support for android o ,u wanna try ?
I
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
The way you put your sentence sounds as if you don't expect it to work, as if you're asking me to jump off a cliff. So...yes I will try, in a few hours.
[email protected] said:
The way you put your sentence sounds as if you don't expect it to work, as if you're asking me to jump off a cliff. So...yes I will try, in a few hours.
Click to expand...
Click to collapse
In 20min
[email protected] said:
The way you put your sentence sounds as if you don't expect it to work, as if you're asking me to jump off a cliff. So...yes I will try, in a few hours.
Click to expand...
Click to collapse
W8 dont flash the zip w8 20min will give new link
Sorry for that
Sent from my Pixel 2 XL using Tapatalk
ProPrk said:
W8 dont flash the zip w8 20min will give new link
Sorry for that
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
No problem. I'm glad I haven't downloaded it yet.
Oreo Kernel Test Build
[email protected] said:
No problem. I'm glad I haven't downloaded it yet.
Click to expand...
Click to collapse
[emoji23][emoji23][emoji23]
try this
https://www.androidfilehost.com/?fid=889964283620758897
[email protected] said:
No problem. I'm glad I haven't downloaded it yet.
Click to expand...
Click to collapse
Did you tried?
Sent from my Le 2 using Tapatalk
ProPrk said:
:laugh::laugh::laugh:
try this https://www.androidfilehost.com/?fid=962021903579484607
Click to expand...
Click to collapse
Yes, now it works on Oreo! Thank you very much.
Apart from cpu governors, its hard to notice the performance difference.
[email protected] said:
Yes, now it works on Oreo! Thank you very much.
Apart from cpu governors, its hard to notice the performance difference.
Click to expand...
Click to collapse
Me trying to make this kernel battery efficient without compromising performance
Sent from my Le 2 using Tapatalk
Updated kernel to #v1.1 and now u can use this kernel in Oreo ROMs too
This kernel only works in 64 bit rom
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
One of the Finest and Oldest Kernel for Redmi Note 7 Pro. Stability alongwith ultra-smooth performance for daily tasks and performance - battery friendly Kernel for everyone to enjoy.
Built with Azure Clang 15 + Link Time Optimization for maximum performance + efficiency for your lovely device.
Each releases experiences a rigorous testing to avoid any regressions.
Click to expand...
Click to collapse
Release Information ( Features + Wiki + Compatibility )
Everything related to the bracketed topics can be found at Github.
Features + Changelogs - https://github.com/Panchajanya1999/msm-4.14/releases/tag/Fourteenth
Q isn't supported at XDA anymore. It's all about R and S
Click to expand...
Click to collapse
Download
Download the build from the link shared below
NOTE: Build Date may be 1 day old (Tested Builds)
Direct Download Link
Click to expand...
Click to collapse
Telegram References
Telegram Group - https://t.me/azure_violet
Telegram Channel - https://t.me/azure_ci
Click to expand...
Click to collapse
Meta
- Toolchain: Azure Clang 15 (subject to updates)
- Toolchain (companion): GCC 11.2
- Main branch: R
Click to expand...
Click to collapse
Donations
I do not get paid for anything I do. Yet, not a single thing is free in this world. I build on top-tier servers, which aren't free. So, if u like my work, consider buying me a Coffee / Soft-drinks !
UPI : [email protected] | [email protected]
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Everyone who authored the commits
* Whole Testing Group Buddies
XDA:DevDB Information
azure Kernel, Kernel for the Xiaomi Redmi Note 7 Pro
Contributors
Panchajanya1999
Source Code: https://github.com/Panchajanya1999/msm-4.14.git
Kernel Special Features: Stable and Latest Kernel with useful features
Version Information
Status: Stable
Current Stable Version: Twelfth
Stable Release Date: 2022-02-22
Created 2019-07-02
Last Updated 2022-02-22
Steps For Flashing On Stock AOSP Recovery
ADB Sideload works totally fine. If you are rooted, use Franco Kernel Manager.
Reserved
I was just thinking to request for a custom kernel..Thankyou man!
Gonna flash rn
RVSingh said:
I was just thinking to request for a custom kernel..Thankyou man!
Gonna flash rn
Click to expand...
Click to collapse
Go Ahead
Panchajanya1999 said:
Go Ahead
Click to expand...
Click to collapse
Using bootlegers rom .After flashing at first phone got stuck at boot animation but then i rebooted into recovery by pressing keys and then to system.Now its Working fine.Will Post If a face any problem.
Thankyou for your work bro
RVSingh said:
Using bootlegers rom .After flashing at first phone got stuck at boot animation but then i rebooted into recovery by pressing keys and then to system.Now its Working fine.Will Post If a face any problem.
Thankyou for your work bro
Click to expand...
Click to collapse
Which Recovery????
Sent from my Redmi Note 7 Pro using Tapatalk
Panchajanya1999 said:
Which Recovery????
Click to expand...
Click to collapse
Peter's
Anybody tested this on MIUI?
Naveenthemi said:
Anybody tested this on MIUI?
Click to expand...
Click to collapse
Won't boot on MIUI.
Either stick with stock kernel or flash custom ROMs
Panchajanya1999 said:
Won't boot on MIUI.
Either stick with stock kernel or flash custom ROMs
Click to expand...
Click to collapse
Ugh..thanks anyways..
I have to ask, when I install a new rom (clean install) do I need to boot first or I can just flash it before magisk and after GAPPS?
justboryata said:
I have to ask, when I install a new rom (clean install) do I need to boot first or I can just flash it before magisk and after GAPPS?
Click to expand...
Click to collapse
Boot first
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
Can I flash over OOS gsi? Which recovery is recommended?
mj25m said:
Can I flash over OOS gsi? Which recovery is recommended?
Click to expand...
Click to collapse
You can
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
Bro any chance you could make one for miui....Appreciate your work...Thnaks
24likan said:
Bro any chance you could make one for miui....Appreciate your work...Thnaks
Click to expand...
Click to collapse
Till xiaomi updates source, I can't
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
justboryata said:
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
Click to expand...
Click to collapse
It is a common problem , try F1xy kernel until this is fixed , we had created a work around on F1xy , because i had already reported this problem like one month ago.
justboryata said:
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
Click to expand...
Click to collapse
Yea,
This is an issue right now,
Will be fixed in next update tho.
There will be a new thing on next update tho. I m working on it...!!!
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
Code:
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Introduction
This is the LineageOS 20for S20FE Snapdragon
This rom is far from done and im working pretty hard to fix it since i got the phone
Click to expand...
Click to collapse
Installation instructions
1. Install TWRP and patches VBMETA by afaneh92
2. Flash the zip inside of TWRP
3. Reboot recovery
4. Flash Gapps and any mod you like
4. Select reboot -> reboot to fastboot
6. flash the wifi fix kernel with fastboot flash boot pathtodownloadedbootimghere
Click to expand...
Click to collapse
Download
ROM
Click to expand...
Click to collapse
Changelog
Code:
Current changelog:07.12.2022
[note] 1st Release of Lineage 20.0
[new] Android 13 T
[changed]
[fixed] Rom boots into OS
Older changelogs:
Click to expand...
Click to collapse
FAQ
What works?
Wifi
Bluetooth
Usb
Camera
Fingerprint sensor
Reverse wireless charging
120hz display
MDNI
Audio
RIL
Stereo speaker
Microfone
Click to expand...
Click to collapse
What doesnt work ?
Sensors
Microphone and earpiece and speakers in calls
Macro lense and other fancy cams only main and front work right now
You tell me
This is only for Snapdragon S20FE not for exynos also not for S20 non fe
VOLTE DONT WORK AND IT WONT EVER WORK
For Gapps i recommend NikGapps
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@SGCMarkus
@Simon1511
@RaviJavaDeveloper
Sources
Code:
[URL="https://github.com/Samsung-sm8150-aosp]Repos[/URL]
awesome
Hi, in the installation instructions for the wifi fix kernel there is no link just pathtodownloadedbootimghere.
Thanks for this rom
I'm happy to see this is being developed. Thank you!
Good job thanks
link wifi fix kernel
GAPPS installed into nothing
Abandoned sorry im not smart enough
J0SH1X said:
Abandoned sorry im not smart enough
Click to expand...
Click to collapse
GAPPS installation failed without any google items
RockStor said:
GAPPS installation failed without any google items
Click to expand...
Click to collapse
becuase there is no free space for gapps on sytem partition cause you are not supposed to install gapps yet
J0SH1X said:
becuase there is no free space for gapps on sytem partition cause you are not supposed to install gapps yet
Click to expand...
Click to collapse
Ok, I understand
sad times
Please drop the boot.img for WIfi fix kernel
armeiz209 said:
Please drop the boot.img for WIfi fix kernel
Click to expand...
Click to collapse
the dev has quit the project. the 3rd dev to do so, 2 more are still working on things but I wouldn't get to hopeful.
3mel said:
the dev has quit the project. the 3rd dev to do so, 2 more are still working on things but I wouldn't get to hopeful.
Click to expand...
Click to collapse
OK, Thank you!
how is the work on its operation going impatiently waiting for a clean gp fate to finally get the power out of this phone to its full potential
J0SH1X said:
becuase there is no free space for gapps on sytem partition cause you are not supposed to install gapps yet
Click to expand...
Click to collapse
I was interested to get one for aosp developments, but this killed me. xD
What you know how dynamic partitions work ? i need to tell the system to add extra space for gapps which i did not do as youre not supposed to use this rom yet since like nothing works
haky 86 said:
I was interested to get one for aosp developments, but this killed me. xD
Click to expand...
Click to collapse
J0SH1X said:
What you know how dynamic partitions work ? i need to tell the system to add extra space for gapps which i did not do as youre not supposed to use this rom yet since like nothing works
Click to expand...
Click to collapse
I could make things works as well, I already did a stable oss with my a70 https://github.com/samsung-sm6150-devs. So I guess could do the same job on samsung's sm8250 if no one is working on it.
can't wait for the full working version . although it would be nice if, for example, the camera apaka or the sound from the voices were at the same level as originally