hi, i would like to use my xzp for octoprint until raspberrys are available again. The OTG function works but I can't charge and use otg at the same time with a Y-cable (aca mode?). I tested the stock and [ROM][13][OFFICIAL] NusantaraProject 5.2 (Toba) [14/11/2022]. Anyone an idea?
Well in theory it should be possible, with a adapter ("double dongle"), that has USB C to USB A to USB A
Like this one (link to amazon) (here's the link in case you can't click it:
https://www.amazon.com/-/de/dp/B07T...ix=usb+c+to+dual+usb+a+adapter,aps,187&sr=8-3 )
You could also search for something like this: usb c to dual usb a adapter
And you should get a few results.
I had one for my samsung (micro usb) and this kind of (double) dongle (adapter) worked.
Related
Hello, we all know that there are USB OTG Cables with extra power plug (Y cable) but those are supposed to power external device like HDD, DVD, or anything what consumes more power than our android device can handle.
But my question is: is there any USB OTG cable with additional power plug but for simultaneous tablet / phone charging while USB stick is used?
I want to watch something long (i.e. TV Show series) from USB stick via OTG cable but I cannot simultaneously charge my tablet, so if it take too long my tablet will be out of power before I stop watching.
blackfire74 said:
Hello, we all know that there are USB OTG Cables with extra power plug (Y cable) but those are supposed to power external device like HDD, DVD, or anything what consumes more power than our android device can handle.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2617692
Roma-ES said:
http://forum.xda-developers.com/showthread.php?t=2617692
Click to expand...
Click to collapse
That means I have to add a resistor only to usb connector or just need a different kernel, or both?
On the native firmware say that this support function is disabled. Personally, I use this CivZ-FLEX-ЛУЧ-REV3.6.2 + SphereXtreme, where works flawlessly with OTG + charging resistor 64.9 K.
I call BS!!!!
I have a stock firmware, and have been using all kinds of USB cables. Found the best are made from Sony/Ericson and Blackberry. Once you have a quality cable your charging issues will go away.
Right now I am using a 7 foot cable that is from a Sony. No charging issues and works perfectly.
Lately I found another MHL cable 2hich is called HDMI to Micro HDMI, and that micro HDMI plug looks exactly like micro USB. Will such cable work with Note 8 properly without additional power?
The version of MHL our device supports requires a power source external to the tablet. That means the adapter itself needs to provide the power (battery or power adapter) or can pull enough off the HDMI cable, which is usually not enough juice to run the connection.
MicroHDMI and MicroUSB are also not physically compatible (won't fit the same port and different pin outs) even if they look so much a like. MHL typically uses MicroUSB at one end and full sized HDMI at the other.
Roma-ES said:
On the native firmware say that this support function is disabled. Personally, I use this CivZ-FLEX-ЛУЧ-REV3.6.2 + SphereXtreme, where works flawlessly with OTG + charging resistor 64.9 K.
Click to expand...
Click to collapse
This is correct u need to put a 63-65 k resistor between ground and Id pin(pin 4 &5) on USB connector. Doesn't work on civatos 4.4.2 as of now. USB host works fine with regular USB host cable but no charging when u use a y cable. I use civatos 4.2.2 kernel also. Works on yyks note 2 4.3 port also..
I have test multiple times. I use a USB dac in car and need charging and USB host.
what resistor should i use on my sghi257m samsung galaxy s4 mini otg usb cable?
on my dads galaxy s5 Active it shows message that says: Do you wanna enable power sharing
is that OTG? on my S4mini nothing pops up
I know this thread is really old but i want to use a USB DAC so need at cable with a resistor as mentioned above but What ROM should I use now?? also is there anywhere I can buy a cable with resistor in it or do i have to do it myself?
I've got an existing OTG cable with micro USB. Does that work for things like thumb drives and mice using the adapter?
If not, would this work?
https://www.amazon.ca/gp/product/B0194WSKOM/ref=ox_sc_act_title_1?smid=A21TE5CLHZDYA7&psc=1
thanks..
It comes with a USB-C to USB-A adapter in the box. You should be able to plug your thumb drive or mouse into that.
Sent from my SM-N910G using Tapatalk
I don't know why they would get rid of something as old as OTG support so I'm assuming that yes it will work.
yes otg works and the samsung smart switch lets you plug one phone into the other and transfer data
Just reading through the AT&T manual: it states clearly that OTG will not work through the supplied USB connector (p9). Nor can you use it to charge the Note 7 from a computer (p12).
With built-in battery too - hope the Note 7 isn't just another pretty fetish.
zamzenos said:
Just reading through the AT&T manual: it states clearly that OTG will not work through the supplied USB connector (p9). Nor can you use it to charge the Note 7 from a computer (p12).
With built-in battery too - hope the Note 7 isn't just another pretty fetish.
Click to expand...
Click to collapse
Well all of the above work on my T-Mobile variant.
On my t-mobile Note 7, I cannot get my Dragonfly Red to work via USB OTG.
GermanGuy said:
On my t-mobile Note 7, I cannot get my Dragonfly Red to work via USB OTG.
Click to expand...
Click to collapse
IDK what that is but my usb drive works fine.
Rydah805 said:
IDK what that is but my usb drive works fine.
Click to expand...
Click to collapse
It is a DAC/Preamp. So you use the included microUSB to USB C adapter for your OTG cable?
Yup
Sent from my SM-N930T using Tapatalk
idk but all my jump drives work just fine, same as my s7 edge.
just plug them into the usb c otg and tranfer files via samsung file app
Ok. I just realized that there is an otg usb to usb c adapter in the box. That one actually works just fine with my external dac.
Sent from my SM-N930T using Tapatalk
I can't get my Oppo HA-2 DAC to work at all. I tried using the included adapters but nothing. I went and bought a USB - USB C cable and that also didn't work. The only way I have been able to get audio is to use a standard charging cable (USB - MicroUSB) and put the USB C adapter on the MicroUSB end. However this charges the Oppo from the Note 7 and I can't disable that. Will burn through the battery in no time! Not sure what else to try at this stage
+1 I have successfully used a SanDisk 8gb flash drive with an aftermarket Rankle usb adapter. I have an AT&T Note 7.
Cheers
BR
rickydenim said:
I can't get my Oppo HA-2 DAC to work at all. I tried using the included adapters but nothing. I went and bought a USB - USB C cable and that also didn't work. The only way I have been able to get audio is to use a standard charging cable (USB - MicroUSB) and put the USB C adapter on the MicroUSB end. However this charges the Oppo from the Note 7 and I can't disable that. Will burn through the battery in no time! Not sure what else to try at this stage
Click to expand...
Click to collapse
I use the included USB-USB C adapter with a USB -USB Mini(?) and my Fiio Alpen. As you mentioned, the Note7 charges the DAC. This also happened with my Note4. You should be able to use a wireless charging pad to charge the Note7 at the same time. That's what I did when I was transferring files between phones. It's transportable but not very mobile.
My little micro usb fan does NOT work with the included usb 3 to microusb connector. So, i'm gonna assume OTG doesnt work as it used to.
Hi all,
Can anyone recommend a USB OTG cable? I would prefer one that will accept a USB Type A peripheral, but still connect to the phone with Type C (not requiring an adaptor). Does such a cable exist?
Yes. Googling type c otg gives you this as the first result. Note that using a micro usb otg cable with a micro→type c adapter doesn't work for some reason, or at least it didn't for me.
I've bought this: https://www.amazon.es/gp/aw/d/B01LX...er+USB+otg&dpPl=1&dpID=41ec3rrdfuL&ref=plSrch and it works quite good as OTG adapter. Take a look.
RM
Yes, I checked settings->extra->OTG-Storage
and there is also a notification tile, which does the same.
BUT: OTG is not working tried this with several adapters, but not the original!
Works fine with me.
Been using it to transfer data over from the 5T.
I used f.e. an adapter usb c to micro usb and than an usb stick with micro usb (not working)
I used also an adapter usb c to micro usb, a micro usb org cable to usb 3.0 and than a usb 3.0 stick (same result)
On my old op3 it helped if you first put the USB drive in the adapter before you insert the adapter in the phone, if adapter (even the original one) was put in first it would not recognize a USB drive.. Hope it helps
Your idea didn't helped.
Normally the LEDs should blink, but nothing happens...
Just to be shure: is original otg adapter is not the only way, it should work with every otg-cable...(?)
Did you check OTG in settings/advanced? It's working great for me and I have an 1€ OTG adapter from China.
Works here great. It works if its enabled before or after inserting. I'm using it with the USB C Yubikey. Only annoyance is you have to turn it on every 15 minutes but I believe there is a Magisk module that can fix this.
I think, I solved it:
The first adapter: usb c to micro USB has no OTG support: It was the last sentence in the fine print:
" USB On-The-Go wird nicht unterstützt"
Hi guys, I got a usb 3.0 I used to use on my Samsung, now I got an adaptor for my op6, I have an issue, everything works great, but the videos are laggy, what could this be any ideas, adaptor fault, or the usb is too slow?
Just ordered a Oneplus 6, it will be my first USB C device, any recommendations for USB C - OTG adapters that work nicely?
Thanks!
I have had this for 1.5 years for now and works as expected (atleast with usb stick... first with OP 3T and now with OP6): https://www.aliexpress.com/item/Typ...330.html?spm=a2g0s.9042311.0.0.27424c4dxAL2qC
such a discomfort that otg cannot functioning via any cable.
It's highly inconvenient to remove my magnet adapter for magnet cable.
OnePlus sells one from their website https://www.oneplus.com/oneplus-type-c-otg-cable
I got this one from Amazon and it works great.
https://smile.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
I bought this one and it works well - Type C to USB 3.0 OTG Adapter, USB-C 3.1 Male to USB 3.0 A Female Adapter, aloici USB-C OTG Host Cable (On the Go) for MacBook Pro, Galaxy S9/8/Note8/Tab, Pixel 2, OnePlus5, Sony XZ and More (black) https://www.amazon.com/dp/B076ZH1P5M?ref=yo_pop_ma_swf
Around 10$.
Usb typa C to Usb 3.1 OTG adapter.
I got this since OnePlus 3 phone. Works fine on Op6. Just instaled one rom with it.
Hi guys, I got a usb 3.0 I used to use on my Samsung, now I got an adaptor for my op6, I have an issue, everything works great, but the videos are laggy, what could this be any ideas, adaptor fault, or the usb is too slow?
I got an adaptor with my Mayflash Magic-NS wireless adaptor. It's working nicely on my Switch and on my phone (yeah I can use various wireless controllers, some of which would not work well on android due to this device). Works for my USB disk on this phone nicely too.
Sent from my OnePlus 6 using XDA Labs