Hello people
Can I flash SM-A750FN/DS with firmware from SM-A750GN/DS via Odin 3.13.1 or other flash tool?
Is this trips knox or not?
I need it to enable internal call recording in the phone.
Because of GDPR my european phones (Note 10+, Note 9 and Note8, S10+, S10e, Fold, Z flip and other ) can not record calls.
Internal recorder is enabled for Thailand and because phone have MULTI-CSC which includes THL CSC, so I just use Thailand SIM card to switch CSC via factory reset to THL and recording works great for all these models.
My friends phone Samsung Galaxy A series A7 (2018) SM-A750FN/DS do NOT have THL in its multi-csc, and I found the THL is in the model SM-A750GN/DS.
As I see the phones are identical just F and G letteres differs.
Currently FN phone is with 3BRK2 - so boot 3rd, android 9, from 2019, December, fw edition 2
I download GN firmware with is 5BTA1 - so boot 5th, android 9 from 2020, January, fw edition 1
For what I know there is no problem from boot 3rd to boot 5th but the models are diffrent FN and GN?
* * *
Any other way to use internal call recording? (Some people talks about XID CSC_HOME flash only.)
Best regards,
Cho
I'm not sure because I always use the right firmware model.
Same queston, I have SM-A750FN, can I flash Android 10 frimware from SM-A750F or SM-A750GN with Odin or I need to wati for for FN?
Here's the released frimware:
https://samfrew.com/download/Galaxy__A7__/mm38/INS/A750FXXU4CTBC/A750FODM4CTBC/
Just wait a couple days to the official release for this model. I wouldn't recommend you to do that because in some Android 10 firmwares for A7 (2018) the bootloader has been updated, making impossible to go back to Pie, so if anything doesn't work well you won't be able to do a rollback. And remember that this phone has different variants with different specs.
Be patient, it will arrive soon.
Can i flash csc of samsung a750f on a750gn??
Basically i need call recording which is not supported in 750gn , but available in 750f..
Hi guys,
I've got the brand new SM-N9860 (Note 20 Ultra 5G) that is TGY/TGY, TGY. This is Hongkong version of the firmware. It lacks two features I used to - native call recording and network speed indicator at the top. I've migrated to CHC (Open China) version and got both
Also CHC version looks much cleaner - you can uninstall all that China software and it has no Google software as sell (no Google Play etc.).
How to do it (no root required, Knox is intact etc., but phone will be factory reset):
1. You need to downgrade from lates TGY to July BRI (yes, BRI) version of the firmware (https://forum.xda-developers.com/ga...nge-csc-sm-n9860-ds-n20u-5g-hongkong-t4163363)
2. After BRI is installed and up, download the latest CHC (I used Frija - https://github.com/SlackingVeteran/frija, use "CHC" for CSC field)
3. Using ODIN (3.14.4), write the firmware (here some tips - https://forum.xda-developers.com/ga...to/ath3-official-stock-fw-updateodin-t4143909), use CSC_... for CSC (not HOME)
Now I have the call recording and network speed indicator out of the box
Tested some sensitive apps: Android Auto - works fine (checked with a car). Google Pay - works fine.
andriy_ said:
Hi guys,
I've got the brand new SM-N9860 (Note 20 Ultra 5G) that is TGY/TGY, TGY. This is Hongkong version of the firmware. It lacks two features I used to - native call recording and network speed indicator at the top. I've migrated to CHC (Open China) version and got both
Also CHC version looks much cleaner - you can uninstall all that China software and it has no Google software as sell (no Google Play etc.).
How to do it (no root required, Knox is intact etc., but phone will be factory reset):
1. You need to downgrade from lates TGY to July BRI (yes, BRI) version of the firmware (https://forum.xda-developers.com/ga...nge-csc-sm-n9860-ds-n20u-5g-hongkong-t4163363)
2. After BRI is installed and up, download the latest CHC (I used Frija - https://github.com/SlackingVeteran/frija, use "CHC" for CSC field)
3. Using ODIN (3.14.4), write the firmware (here some tips - https://forum.xda-developers.com/ga...to/ath3-official-stock-fw-updateodin-t4143909), use CSC_... for CSC (not HOME)
Now I have the call recording and network speed indicator out of the box
Click to expand...
Click to collapse
Thank you for sharing, can you please confirm does eSIM works on China firmware?
andriy_ said:
Hi guys,
I've got the brand new SM-N9860 (Note 20 Ultra 5G) that is TGY/TGY, TGY. This is Hongkong version of the firmware. It lacks two features I used to - native call recording and network speed indicator at the top. I've migrated to CHC (Open China) version and got both
Also CHC version looks much cleaner - you can uninstall all that China software and it has no Google software as sell (no Google Play etc.).
How to do it (no root required, Knox is intact etc., but phone will be factory reset):
1. You need to downgrade from lates TGY to July BRI (yes, BRI) version of the firmware (https://forum.xda-developers.com/ga...nge-csc-sm-n9860-ds-n20u-5g-hongkong-t4163363)
2. After BRI is installed and up, download the latest CHC (I used Frija - https://github.com/SlackingVeteran/frija, use "CHC" for CSC field)
3. Using ODIN (3.14.4), write the firmware (here some tips - https://forum.xda-developers.com/ga...to/ath3-official-stock-fw-updateodin-t4143909), use CSC_... for CSC (not HOME)
Now I have the call recording and network speed indicator out of the box
Click to expand...
Click to collapse
Wait a minute....
Are you suggesting to...
A) Move from Latest TGY ROM (in my case ATJ1) to July BRI firmware ATGM.... right?
B) Now when July BRI (Taiwanese) Firmware is Flashed and phone is running. You are suggesting to download latest CHC (Open China) firmware and flash ONLY CSC (OF CHINESE FIRMWARE CHC) and not the rest of 2 files AP & CP??
Does a CSC of other region work with AP Firmware of another region if the phone model remains same (SM-N9860)??
Will it unlock native call recording and other features?
Will it update in future as well?
If it updates then will the CSC be updated aswell? And it remains CHC or revert back to BRI?
Please guide us through.
I am asking this because I already did migrate to CHC firmware two weeks ago and I didn't had to goto July BRI. I was at August TGY firmware and I simply flashed the CHC firmware and got Native call recording and that network indicator too but then there was heaps of bloatware and all Firmware actually was for Chinese people with everything in chines, samsung member, no Netflix, no samsung pass, many thing in Chinese, country name of phone numbers in Chinese, difference in phone number formats and many more. It was so irritating so I switched back to TGY.
Please tell us of you have some different experience or work around. I need my phone to keep updating as well.
Sent from my SM-N9860 using Tapatalk
A - correct
B - no, you need to flash all the components (BL, AP etc.). I had "TGY/TGY, TGY", now I have "CHC/CHC, CHC/TGY"
You can't update CSC only (ODIN will show the error and will not proceed)
With CHC you have all the OTA features. I'm sure that after the update you'll keep CHC.
Actually, the only drawback of the CHC I've noticed to date - "Yellow pages" tab and country name in the Phone app (but I prefer True Phone, so it doesn't matter). All the bloatware can be uninstalled (moreother - TGY installs Google apps, that I don't use like Photo etc.), keyboard should be switched to Swiftkey or Samsung. I've downloaded Netflix apk (from 4pda) and it works well. I see no single reason to switch back to TGY or BRI.
The only item to be checked left is Android Auto in a car (it could be a stumbling block).
If you like TGY, you can try the following trick - write CHC (it has OZL CSC - N9860OZL1ATI3), after that use SamKEY to change CSC to TGY (it should work with OZL, and doesn't work with OZS), after that use ODIN to write TGY (except CSC), and after that - revert back CSC from TGY to CHC using SamKEY. I haven't tried it, just an idea.
andriy_ said:
A - correct
B - no, you need to flash all the components (BL, AP etc.). I had "TGY/TGY, TGY", now I have "CHC/CHC, CHC/TGY"
You can't update CSC only (ODIN will show the error and will not proceed)
With CHC you have all the OTA features. I'm sure that after the update you'll keep CHC.
Actually, the only drawback of the CHC I've noticed to date - "Yellow pages" tab and country name in the Phone app (but I prefer True Phone, so it doesn't matter). All the bloatware can be uninstalled (moreother - TGY installs Google apps, that I don't use like Photo etc.), keyboard should be switched to Swiftkey or Samsung. I've downloaded Netflix apk (from 4pda) and it works well. I see no single reason to switch back to TGY or BRI.
The only item to be checked left is Android Auto in a car (it could be a stumbling block).
If you like TGY, you can try the following trick - write CHC (it has OZL CSC - N9860OZL1ATI3), after that use SamKEY to change CSC to TGY (it should work with OZL, and doesn't work with OZS), after that use ODIN to write TGY (except CSC), and after that - revert back CSC from TGY to CHC using SamKEY. I haven't tried it, just an idea.
Click to expand...
Click to collapse
Thanks for the detail, my only and only requirement is native call recording. I am brewing with ACR with poor quality recordings, otherwise I love TGY
Sent from my SM-N9860 using Tapatalk
dublinz said:
Thank you for sharing, can you please confirm does eSIM works on China firmware?
Click to expand...
Click to collapse
I have this phone imported into the UK via WondaMobile and unfortunately as far as I'm aware to what Wanda says this phone does not have eSim capabilities.
BandOfBrothers1 said:
I have this phone imported into the UK via WondaMobile and unfortunately as far as I'm aware to what Wanda says this phone does not have eSim capabilities.
Click to expand...
Click to collapse
Can you go to Sim card manager and check is there screen like this ?
Thank you for help
dublinz said:
Thank you for sharing, can you please confirm does eSIM works on China firmware?
Click to expand...
Click to collapse
dublinz said:
Can you go to Sim card manager and check is there screen like this ?
Thank you for help
Click to expand...
Click to collapse
This is mine.
BandOfBrothers1 said:
This is mine.
Click to expand...
Click to collapse
Gotcha!!! Thanks
dublinz said:
Gotcha!!! Thanks
Click to expand...
Click to collapse
I'm sure it has been mentioned time and time again that the Snapdragon models of the N20U doesn't have esim activated by default. Only Samsung can activate it. They did not do it on the S20 Snapdragon series and I don't think they will on the N20.
west2cool said:
I'm sure it has been mentioned time and time again that the Snapdragon models of the N20U doesn't have esim activated by default. Only Samsung can activate it. They did not do it on the S20 Snapdragon series and I don't think they will on the N20.
Click to expand...
Click to collapse
I searched on numerous thread, but didnt find any information in regards to HK version, and i do need info for this specific model.
////////
All Galaxy S20 phones (S20, S20+, and S20 Ultra) have the required hardware built-in.
But in a few regions, and in a few carrier models, the eSIM support was disabled. For this reason, we did not include eSIM support as a top 5 new features of Galaxy S20.
So, Galaxy S20 is eSIM-capable. But it may be disabled in the firmware by a few distributors or carriers."
///// read more on https://gadgetguideonline.com/s20/esim-support-use-esim-on-galaxy-s20/
Based on this information i was trying to VERIFY does N20 with BRI or CHI have esim support !!!!
The Note 20 Ultra uses NXP's conbined chipset which includes...embedded...UWB, NFC, SIM and eSIM. And the drivers for eSIM are installed in the phones. Samsung has software deactivated the eSIM...
dublinz said:
I searched on numerous thread, but didnt find any information in regards to HK version, and i do need info for this specific model.
////////
All Galaxy S20 phones (S20, S20+, and S20 Ultra) have the required hardware built-in.
But in a few regions, and in a few carrier models, the eSIM support was disabled. For this reason, we did not include eSIM support as a top 5 new features of Galaxy S20.
So, Galaxy S20 is eSIM-capable. But it may be disabled in the firmware by a few distributors or carriers."
///// read more on https://gadgetguideonline.com/s20/esim-support-use-esim-on-galaxy-s20/
Based on this information i was trying to VERIFY does N20 with BRI or CHI have esim support !!!!
Click to expand...
Click to collapse
BRI, TGY, CHC do not support Esim as none of the snapdragon versions has esim activated, thanks to Samsung.
Confirming - no eSim support on TGY, BRI (October update) and CHC (September update)
Just to add,the HK models are dual physical sim not eSim. Folks chasing something that doesn't exist lol.
andriy_ said:
Hi guys,
I've got the brand new SM-N9860 (Note 20 Ultra 5G) that is TGY/TGY, TGY. This is Hongkong version of the firmware. It lacks two features I used to - native call recording and network speed indicator at the top. I've migrated to CHC (Open China) version and got both
Also CHC version looks much cleaner - you can uninstall all that China software and it has no Google software as sell (no Google Play etc.).
How to do it (no root required, Knox is intact etc., but phone will be factory reset):
1. You need to downgrade from lates TGY to July BRI (yes, BRI) version of the firmware (https://forum.xda-developers.com/ga...nge-csc-sm-n9860-ds-n20u-5g-hongkong-t4163363)
2. After BRI is installed and up, download the latest CHC (I used Frija - https://github.com/SlackingVeteran/frija, use "CHC" for CSC field)
3. Using ODIN (3.14.4), write the firmware (here some tips - https://forum.xda-developers.com/ga...to/ath3-official-stock-fw-updateodin-t4143909), use CSC_... for CSC (not HOME)
Now I have the call recording and network speed indicator out of the box
Click to expand...
Click to collapse
Hello to everyone,
I have followed Andriy_ 's procedure and now I am experimenting the good and the bad of CHC ROM. The only very annoying problems I am getting are with Google Maps continuously crashing after getting the right GPS position, Google Pay not working at the end of the certification of a credit card and one of my 3 bank's accounts apps saying that it is not compatible with my phone (Safety Net Check fails ("Basic integrity" and "CTS Profile Match")). Everything was obviously working like a charm with original (Hong Kong) rom. I think that there is no solution, maybe Google does not certify chinese ROMs....Any help?
Regards
Franco
FRANCO74 said:
Hello to everyone,
I have followed Andriy_ 's procedure and now I am experimenting the good and the bad of CHC ROM. The only very annoying problems I am getting are with Google Maps continuously crashing after getting the right GPS position, Google Pay not working at the end of the certification of a credit card and one of my 3 bank's accounts apps saying that it is not compatible with my phone (Safety Net Check fails ("Basic integrity" and "CTS Profile Match")). Everything was obviously working like a charm with original (Hong Kong) rom. I think that there is no solution, maybe Google does not certify chinese ROMs....Any help?
Regards
Franco
Click to expand...
Click to collapse
Told ya already.... [emoji5]
Sent from my SM-N9860 using Tapatalk
andriy_ said:
Hi guys,
I've got the brand new SM-N9860 (Note 20 Ultra 5G) that is TGY/TGY, TGY. This is Hongkong version of the firmware. It lacks two features I used to - native call recording and network speed indicator at the top. I've migrated to CHC (Open China) version and got both
Also CHC version looks much cleaner - you can uninstall all that China software and it has no Google software as sell (no Google Play etc.).
How to do it (no root required, Knox is intact etc., but phone will be factory reset):
1. You need to downgrade from lates TGY to July BRI (yes, BRI) version of the firmware (https://forum.xda-developers.com/ga...nge-csc-sm-n9860-ds-n20u-5g-hongkong-t4163363)
2. After BRI is installed and up, download the latest CHC (I used Frija - https://github.com/SlackingVeteran/frija, use "CHC" for CSC field)
3. Using ODIN (3.14.4), write the firmware (here some tips - https://forum.xda-developers.com/ga...to/ath3-official-stock-fw-updateodin-t4143909), use CSC_... for CSC (not HOME)
Now I have the call recording and network speed indicator out of the box
Click to expand...
Click to collapse
You don't need to do step 1. You can flash directly to a CHC room. That's what I did before.
---------- Post added at 10:33 AM ---------- Previous post was at 10:26 AM ----------
FRANCO74 said:
Hello to everyone,
I have followed Andriy_ 's procedure and now I am experimenting the good and the bad of CHC ROM. The only very annoying problems I am getting are with Google Maps continuously crashing after getting the right GPS position, Google Pay not working at the end of the certification of a credit card and one of my 3 bank's accounts apps saying that it is not compatible with my phone (Safety Net Check fails ("Basic integrity" and "CTS Profile Match")). Everything was obviously working like a charm with original (Hong Kong) rom. I think that there is no solution, maybe Google does not certify chinese ROMs....Any help?
Regards
Franco
Click to expand...
Click to collapse
Yes, because this specific room is not google certified, a requirement to use secured google services. This is one of the reasons that made me go back to TGY/BRI. Also it doesn't have the Samsung Pass and you can't get rid of the Chinese yellowpage service in the phone app (unless you use 3rd party phone app as the default).
I have no issues with Google Maps and Google Pay works fine on CHC... Have you installed Play market?
andriy_ said:
I have no issues with Google Maps and Google Pay works fine on CHC... Have you installed Play market?
Click to expand...
Click to collapse
Yes, downloaded from a well known and reliable APK repository (Google Play Store, Play Services and Framework)
I've installed Play market only. Maybe this is the difference?
Code:
Your warranty is now void.
If you root your device, Your KNOX status will be tripped.
You can still pass the safety net after you root if you follow the instructions.
Sorry for USA models, you can't root unless you can unlock your bootloader
You will lose ALL your data if you unlock your bootloader. Do back up your data.
I am not responsible for bricked devices, or dead SD cards although it is not possible
Please do some research if you have any concerns about doing this to your device
How to flash official firmware? (not the root and unlock bootloader part!)
You will need:
A Galaxy S22 Ultra and common sense
Samsung Odin (the flashing tool of the official firmware)
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
You need to extract the zip file and you are going to use the file Odin3_v3.14.1.exe inside the folder.
Samsung Android USB Driver for Windows
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Double-click and install the exe file.
Optional: If you just want to change CSC, /efi/imei/mps_code.dat is where you can edit after rooting the phone
Replace the CSC you would like to be in the file
If you like to download the firmware of your carrier, follow the instructions bellow
Release 1.0.3 · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Download the platform you want to download to. (Windows)
You need to extract the zip and double-click open the file Bifrost.exe inside the folder.
You need to fill in the Model, and Region, press the Check for Updates button and the Download button.
How to find the Model: on your phone → Settings → About Phone → The third row says the Model number and you need to remove the part with the part of /xx, for example, SM-S908B/DS and you only need to type SM-S908B
How to find the Region: You can check the Region at this link https://samfrew.com/model/SM-S908B/
You need to find find a three-letter word depending on your carrier and country and type it in Bifrost, for example, EVR
Press the Check for Update button and download it with the Download button.
Put it to a place you can easily find, ie. Desktop.
After downloading it, find the file SM-xxxxx_x_xxxxxxxx_xxx.zip.enc4 on the place you put it and change the document format from .enc4 to .zip. Then, double-click and extract the file.
Open Odin3_v3.14.1.exe and turn off your phone. Connect a side of your USB to your PC/Laptop, and keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrive at Download Mode press volume up. Go back to Odin3_v3.14.1.exe:
-Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select AP_xxxxxxxxxxx.tar.md5
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
Optional: add PIT file if you have to repartition.
Press Start to flash the firmware, after that is done, your device will automatically reboot to the system.
How to unlock the bootloader?
Go to your phone → Settings → About Phone → Software information → Press Build number 6 times until you see the notice “You’re now a developer”
Go in Settings → Developer options → enable OEM unlocking
Power off your phone first. Then, connect a side of your USB to your PC/Laptop, press Vol Up + Down and then plug in the USB while keeping Vol Up+Down pressed.
When you arrive at Download Mode, long press volume up until you see the black screen. Confirm to unlock the bootloader and you will erase your device.
How to root your phone?
After you unlock your bootloader, you set up your phone and ensure you do not sign in to your Google account first. Install Magisk https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk on your phone. You need to allow the app to install other apps so that you can install the apk.
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, and keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrive at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
Optional again: add PIT file if you have to repartition
When it finishes flashing, it will automatically reboot and you can gain root access.
Optional: If you want to have the safety net passed (most of the banking apps use it), then you need to install the zip
as a Magisk module in Magisk https://github.com/kdrag0n/safetynet-fix/releases
How? Go to Magisk → Modules → install from storage and select the zip you downloaded.
How to update the system without losing roots and data?
Download the new firmware of the phone and update the Magisk App if it is not up to date. Unzip the firmware you download and transfer the AP file to your phone. Patch your AP file and transfer it back to your PC (in /sdcard/Download)
Power off the phone and reboot to Download mode
Open Odin and put the new magisk_patched file in the AP slot, the BL and CP from your new firmware into their respective slots and importantly *HOME_CSC* into the CSC slot.
Press start and let Odin do its stuff.
When flashed, do not wipe.
Press and hold Vol-down and Power
As soon as the screen appears, let go of all buttons.
Within moments without any further user intervention your phone will reboot into your updated Magisk rooted mode, data intact.
Credits to:
Magisk and all the develpers
jult for informing me about the errors
Thanks, still waiting for s22u and firmware(BRI/sm-s9080).
Edit: The firmware has come up.
donkeyman1234 said:
Thanks, still waiting for s22u and firmware.
Click to expand...
Click to collapse
The time of downloading the firmware is quite long, please be patient
It gives me an error when I try to check for updates. It's the EUX version.
acbdo6 said:
It gives me an error when I try to chek for updates. It's the EUX version.
Click to expand...
Click to collapse
I am looking into the problem, please wait
acbdo6 said:
It gives me an error when I try to check for updates. It's the EUX version.
Click to expand...
Click to collapse
I think you may need to download the file at this link, although it will be slower. Usually, the app always works. Sorry
Download Samsung Galaxy S22 Ultra SM-S908B EUX Europe S908BXXU1AVA7 firmware
Fast download latest Samsung Galaxy S22 Ultra firmware SM-S908B from Europe with S908BXXU1AVA7 and Android version 12
www.sammobile.com
This will work on the Verizon version?
lucky_strike33 said:
This will work on the Verizon version?
Click to expand...
Click to collapse
I have a look at the internet and I think maybe you will need some service like that https://forum.xda-developers.com/t/sampwnd-usa-model-bl-unlock-info-u-u1-w.4201689/ if you cannot unlock the bootloader by following the guide
My s22ultra is SM-S908B EUX and I want to flash the Indonesian XID firmware which is OLE and SM-S908E. Is this possible?
gpap2004 said:
My s22ultra is SM-S908B EUX and I want to flash the Indonesian XID firmware which is OLE and SM-S908E. Is this possible?
Click to expand...
Click to collapse
you need to use the firmware of the same model number but you can use the firmware from different country
Williamtung said:
you need to use the firmware of the same model number but you can use the firmware from different country
Click to expand...
Click to collapse
Looks like Samsung changed some things there. XID firmware was available for flashing to my ex - S21 ultra . Now , in S22 ultra, I see different types of regions (SM-S908E and SM-S908B).
gpap2004 said:
Looks like Samsung changed some things there. XID firmware was available for flashing to my ex - S21 ultra . Now , in S22 ultra, I see different types of regions (SM-S908E and SM-S908B).
Click to expand...
Click to collapse
emmm... i'm not really sure about it now. maybe you can have a try then
[edit]: I have a look at the internet and I think it is all right if you use firmware of a different model. Of course, the spec should be similar/the same
Williamtung said:
emmm... i'm not really sure about it now. maybe you can have a try then
Click to expand...
Click to collapse
Yeah, but I'm afraid. I would not like to brick the phone. Except the all procedure stops from Odin and avoid bricking.
gpap2004 said:
Yeah, but I'm afraid. I would not like to brick the phone. Except the all procedure stops from Odin and avoid bricking.
Click to expand...
Click to collapse
you won't likely brick your device because I have taken a look and both devices are identical. So, I think it is fine to flash
Williamtung said:
you won't likely brick your device because I have taken a look and both devices are identical. So, I think it is fine to flash
Click to expand...
Click to collapse
This is great! Thanks ! Because XID ( Indonesian) firmware supports fully native call recording. Samsung's OTA updates are also available every month.
gpap2004 said:
This is great! Thanks !
Click to expand...
Click to collapse
you are welcome
I just made a research to the internet and I found that SM-S908E is probably different variant from SM-S908B .
SM-S908E is a snapdragon edition while SM-S908B is Exynos.
So , I think I cannot flash XID firmware for snapdragon edition to an Exynos version
I'm sad now
gpap2004 said:
I just made a research to the internet and I found that SM-S908E is probably different variant from SM-S908B .
SM-S908E is a snapdragon edition while SM-S908B is Exynos.
So , I think I cannot flash XID firmware for snapdragon edition to an Exynos version
I'm sad now
Click to expand...
Click to collapse
Oh, sorry. I haven't noticed about the SoC. The SoC in Europe is Snapdragon. So I don't think you should change it.
If you just want to change CSC, /efi/imei/mps_code.dat is where you can edit. Both firmware is the same except the CSC, no difference between them
My preordered s22u will come with snapdragon (sm-s9080 BRI ), I will use CHC csc, also like to have call recording.
gpap2004 said:
Looks like Samsung changed some things there. XID firmware was available for flashing to my ex - S21 ultra . Now , in S22 ultra, I see different types of regions (SM-S908E and SM-S908B).
Click to expand...
Click to collapse
S908E = snapdragon
S908B = exynos
Some countries have both version listed, you needs to to download one according your device
You can check about phone model number to see which one you own