A thread for the users of Geniatech Enjoy TV (300, 1000, 2000, 3000, 4000,...)
These are set-top box using Android 2.3 for the last upgrade and soon 4.0 ICS (only beta version now) connecting to your TV you can watch movies/stream, listen music, navigate internet, etc...
You can find my unboxing/test/reviews/tutos
Hello,
Have you tried the ics?
"Geniatech, M1 Android 4.020 120420 Version Released
M1 Android 4.0 20120420 firmware work on Geniatech’s ATV1000/2000/3000/300/
310/510 model with 512M RAM. It is unstable on 256M RAM models.
Download Android 4.0 firmware from here:
http://www.geniatech.net/down-eng/Androidtvbox/update20120420_M1_4.0.zip
Download and don’t unzip, change the file name to update.img, all are small characters.
And, please check you did not hide the extension name of the file on PC.
1. If you are using android 2.3(as long as the Uboot version is 20111102 or later version in setting->about device), please copy the file into SD card and insert to the box. Then, go to setting->privacy->update system to update firmware directly, the box will restart after finished.
2. If your box is working with android 4.0 beta version, please copy the file into SD card or USB disk and connect to the box, then run Upgrade app (there is an Upgrade icon on 4.0), select update.img file in local update option to upgrade.
3. If you want to degrade to android 2.3:
A: Download below firmware http://www.geniatech.com/down-eng/Androidtvbox/update20120111.zip
Don’t unzip, change the file name /format to update.img, the same upgrading steps as above.
Fixed problems base on Android 4.0 beta version:
1. Enlarged mouse icon
2. Fixed no audio on Ypbpr output mode issue
3. Fixed some buttons did not work on remote control issue
4. Updated flash player 10.2 which supports hardware decoding ICS version
Please note CVBS output/USB camera/3G dongle/Geniatech’s TV dongle
have not been supported yet."
There are much more activity / information on this thread:
http://androidforums.com/google-tv/408166-geniatech-enjoy-tv.html
HTH.
how can i connect it to pc
I see it have a mini usp port to connect to pc.but when i connect it to my laptop it is not recognize anything,please show me how!!!Thanks!!!
ATV-3000
Hey guys, stupid question. Anyone got either a digital copy of the atv-3000 manual or a set of instructions re: SATA installation ?
I got a box with no paper or CD or any reference. Just the ATV 3000 and it's hardware parts and trying to get a SATA 2gig drive working inside it.
Any help appreciated.
mysticjeff said:
Hey guys, stupid question. Anyone got either a digital copy of the atv-3000 manual or a set of instructions re: SATA installation ?
I got a box with no paper or CD or any reference. Just the ATV 3000 and it's hardware parts and trying to get a SATA 2gig drive working inside it.
Any help appreciated.
Click to expand...
Click to collapse
Have you tried the link above at the Android forums?
Tweaks & best Rom for the Geniatech M1
boys might be onto something here for bricked devices..
not sure yet as still reading.. I am actually looking for a CWM package to use
and think I am close..
anyway.. check this out..
http://imgur.com/a/rf3OT#WghJo
http://www.slatedroid.com/topic/36614-mele-a1000a2000-install-cwm-cm9aokp-all-mods/
Edits:
VPN's on Pivos ICS..
Bit of feed back for you on Openvpn for Android by Arne Schwabe
I am using TCP port 443.. Working fine.. streaming youtube now from behind GCFW.
What I found on connect was..
On Ethernet - It will connect, but then it will turn off the Ethernet connection so the connection drops..
Turn on Wifi, Open the Openvpn connection again and it connects, Ethernet connection also shows up for a bit..
Drops off.. but connection is kept on Wifi..
So by using DroidVpn or OpenVpn for Android, or Via a VPN'ed connection on a laptop/USB-doggle from a desktop via "Connectfiy" your users can be using the Xios ICS with VPN's as is..
Click to expand...
Click to collapse
System enharncements:
I am using a few programs to make this build run sweet.. the following are the programs I using and its up to yourself to do some reading and work out which things to tweak.. but mines running as sweat as it ever has.. NO LAG or RE-DRAWS.... and Google Play store is not sticky anymore.. !!!
Also as a note I am running Livewall papers in the background "Ocean HD" so this is taking up 15mb of Ram.. but I do shut down any Google Play Store and Google services so that they are not chewing the fat..
Rescan Media ROOT
Disable and Kill the media scanner at boot.
https://play.google.com/store/apps/...SwxLDMsImNvbS5hZGR6Lm1lZGlhc2Nhbm5lcnJvb3QiXQ
System Tuner:
https://play.google.com/store/apps/details?id=ccc71.pmw&feature=search_result
Pimp My Rom -
Take your time with this one and work out what settings work for you..
I suggest you go in and use the Tools>Universal Init.d Support -- to Check that it is setup for you..
if it say negitive just hit the Activate button then test.. works for me..
https://play.google.com/store/apps/details?id=com.androguide.pimp.my.rom&feature=sear ch_result
Also, there is a Entropy Generator no 5.. you want to have this set so it is showing "4096 bits"
you can also use this program to check it it working..
Check Random Entropy
https://play.google.com/store/apps/details?id=com.promethylhosting.checkrandentropyav ail&feature=search_result
If you want to know more head to this post on XDA:
[MOD] CrossBreeder - Sharp reductions in Android GUI lag - Frandom support
http://forum.xda-developers.com/showthread.php?t=2113150
So really now with the XAF Custom build of XBMC and this setup I am good to go..
http://code.google.com/p/xbmc-android/downloads/list
Well.. good to sell it and upgrade to a Dual-core..
Enjoy TV geniatech 510b
Hi all,
i have a question about geniatech 510b with android 4.0.4 and hardware support for video stream on NexStream player (smooth streaming).
We have a problem with hardware support for video encoding.
Has anybody any knowledge with this problem?
Reward guaranted..
VMedia VBox
Hi. I have had this doorstop Geniatech box sitting around for a couple of years. It's from a Canadian IPTV provider, VMedia. I'd like to do something with it.
I downloaded some apps but nothing could ID a model.
Anyone out there have one of these?
Thanks!
Atv510b, atv100
Hi guys,
I have Geniatech ATV510B and ATV100 with Android 4.0.3.
Did anyone managed to update it to any newer Android version?
Even Android 4.1 Jelly Bean would help me very much.
Milan
Possible issues:
D6000 reboots: 2 users have stated that turning off animations was correlational to D6000 rebooting itself. I have turned off animations since the beginning and not experienced this problem at all on any ROM. Still, it's worth noting here as a possible solution: Turn animations back on if animations are off and you are having reboots
Box states other than official site in regards to frequency support: Gone, info link removed by XDA mods.
Several users experiencing restarts when phone goes into deep sleep
Hard bricked after ROM install: Plug phone into PC via USB and enter recovery (VolDown+Power) then do reboot
v2.4 D6000 dedicated function button not working. Solution: Switch to Chinese language and set by pressing button or through system settings. Switch back to English. Profit.
At least 4 Western users and one China user has experienced "dead battery" syndrome. The internal battery will not charge. Phone boots into Android, after a few seconds phone freezes, then reboots or powers down. Battery charge icons do not show when phone powered down. Solution:
[/hide]
All known ROMS
All known ROMS (contact me if we're missing any): Gone, info link removed by XDA mods
How to upgrade to 5.1 from User 861efdee
Driver Files (Found in 4pda.ru forums):
http://s000.tinyupload.com/?file_id=05936486760178633478 (Just the drivers)
https://yadi.sk/d/LKwZHvUEiosBx (Drivers + QPST/QFIL)
1. Install the drivers. (Accept all default settings)
2. Install QPST/QFIL (Accept all default settings)
3. Unzip the tar.gz to a folder. (Remember this folder)
4. Run QFIL, it should auto detect the port (mine was COM5)
5. Select Flat build.
6. Select Programmer Path from the unzipped tar.gz folder just now and select prog_emmc_firehose_8936.mbn
7. Ensure the Select build path is the path to the unzipped tar.gz folder.
8. Click on Load XML and select rawprogram_unparse
9.. Select patch0.xml
10. Click on Download. Windows will suddenly find and install another new driver and you will receive a "Fail to find QDloader" error
After Windows has installed the driver, go to QFIL and select the new port number for the device Windows have just installed. You should see the number change from 9091 to 9008 and different COM number.
11. Press Download again and cross your fingers.
Root, gapps, TWRP tutorial: Gone, link removed by mods.
Recommended gapps: http://opengapps.org Make sure to DL ARM-64 for 5.1. Pico recommended.
For those concerned about frequencies, we finally had a Canadian answer back and he's connecting to bands as advertised on the site. This means the box is incorrect and the official Innos site is listing the correct frequency support: Gone, link removed by mods.
Wow thanks for sharing :highfive:
Spec are good, but is innos a reliable manufacturer ?
Where can I buy one from 'Canada, and will it be in english????
A 6,000mah battery with octa a53's is exactly what i want.
benxico said:
Spec are good, but is innos a reliable manufacturer ?
Click to expand...
Click to collapse
They're using quality components. If you don't want to bite yet, wait for the review results.
imatts said:
Where can I buy one from 'Canada, and will it be in english????
A 6,000mah battery with octa a53's is exactly what i want.
Click to expand...
Click to collapse
Should be released this week. You'll need to buy from a China shop most likely, Innos D6000 unlikely to be sold retail in anywhere but China or China resellers.
Do somebody know, if it's prerooted? If not can somebody know how to do it?
Can I load there some custom roms?
Will custom roms recognize two batteries, or it's just unique for this innos firmware?
Details of software is necessary to buy, because without root it's useless.
It would be nice to get some more details of its software.
The Innos D6000 has just been received. As far as Innos D6000 root, rooting it shouldn't be a problem. I may delve into that later, but at this point just general testing. So far it's proving to be a very professionally done package. I've put together a quick unboxing. Just slammed it together. Nothing fancy. Uploading to YouTube now. Already up on Facebook.
<MOD EDIT - Link Removed>. First post on the page.
Chinaphonearena said:
The Innos D6000 has just been received. As far as Innos D6000 root, rooting it shouldn't be a problem. I may delve into that later, but at this point just general testing. So far it's proving to be a very professionally done package. I've put together a quick unboxing. Just slammed it together. Nothing fancy. Uploading to YouTube now. Already up on Facebook.
Click to expand...
Click to collapse
Sweet, thanks for the review. I've been looking at this phone for the last couple weeks and really interested in getting it. Really looking forward to the full review on your site!
Also, what exactly do you mean about rooting possibilities?
kuzimoto said:
Sweet, thanks for the review. I've been looking at this phone for the last couple weeks and really interested in getting it. Really looking forward to the full review on your site!
Also, what exactly do you mean about rooting possibilities?
Click to expand...
Click to collapse
It means the phone is rootable, but most likely will need to flash TWRP / CWM.
I'll be doing a running review of the Innos D6000. Piece by piece, then putting it together at Gizbeat with a conclusion. Most likely this week.
That's nice. Can't wait Your movie and my innos it's
Still waiting for dispatch in China...
It was nice if the root methods will work for it.
Hi all.
I bought this phone last week and so far is great.
I found a Chinese forum and install a ROM via native recovery from there but all the Gapps are gone now. The phone have no root and Market.
I install Mi Market and manage to install Play Store and Google Services but the Play Store gives me an error of connection due to the host file in System / etc (root).
I'm not a developer and i'm looking for a Custom recovery or Root access for this device, when you have please post it....
Thanks in advance
Hi All,
I also had problems with an update removing all google services.
You need to use the annoying Qualcomm wire brush method and drivers! As its type C USB, you will also need Qualcomm Ethernet drivers and not standard USB.....
In windows 10 etc you'll also have to disable driver certificate verification to install the drivers.
At the moment there is no root option, but here's the google play 5.1.1 version:-http://bbs.innos.com/forum.php?mod=viewthread&tid=59378&extra=page%3D1&mobile=2
To register on the innos BBS to view links, you'll need a QQ messenger account to use the baidu cloud downloaded.
I would post the entire instructions but I'm currently on holiday in the Ukraine.
Let me know if you need any more help installing the ROM and getting over the great firewall of China!
Thanks!
adojames said:
Hi All,
I also had problems with an update removing all google services.
You need to use the annoying Qualcomm wire brush method and drivers! As its type C USB, you will also need Qualcomm Ethernet drivers and not standard USB.....
In windows 10 etc you'll also have to disable driver certificate verification to install the drivers.
At the moment there is no root option, but here's the google play 5.1.1 version:-http://bbs.innos.com/forum.php?mod=viewthread&tid=59378&extra=page%3D1&mobile=2
To register on the innos BBS to view links, you'll need a QQ messenger account to use the baidu cloud downloaded.
I would post the entire instructions but I'm currently on holiday in the Ukraine.
Let me know if you need any more help installing the ROM and getting over the great firewall of China!
Thanks!
Click to expand...
Click to collapse
Hi Ado James
I have everything you said here except the Qualcomm ethernet drivers.
I will look for this in Google and try to install it and then try to install the ROM....
I will keep you post it
Thanks
This bbs site lookslike fully of helpful informations, but even after translate looks like hard to understand...
Maybe it's time to make space for innos at this forum? Mods?
It could be reason to collect soft or even ingest developers to do done software?
It was nice to install TWRP and some custom roms like slimcat or cm... Is it possible? Will wait, will see...
Zenuno said:
Hi Ado James
I have everything you said here except the Qualcomm ethernet drivers.
I will look for this in Google and try to install it and then try to install the ROM....
I will keep you post it
Thanks
Click to expand...
Click to collapse
Hi Ado
I can't find the right drivers for type-c usb.
If you please, when you arrive from your vacations try to post here all the drivers and programs necessary...
Thanks in advance
I also get the Innos D6000 and are happy with him. By reading your posts it's not an option to upgrade(using wire brush) to a newer version of software due to the play issue(suppose international shipment bring a bit different rom from the Chinese version). On the innos bbs forum i also noticed people not happy with newer software than v1.1 (android 5.0.2), but also noticed people are happy with this rom:
http://bbs.innos.com/thread-59378-1-1.html
it seams it bring play, anyone tried it ?
D6000 frequencies?
According to Gizbeat there is a question about frequencies
<MOD EDIT - Link Removed>
Owners of d6000 If you could, please state your location and what frequencies you are quite sure you're connecting on.
There's also this thread: Where a user is unable to connect to B7 LTE
<MOD EDIT - Link Removed>
Because I'm from USA and it means the phone is completely useless there if box is correct.
damian5000 said:
According to Gizbeat there is a question about frequencies
<MOD EDIT - Link Removed>
Owners of d6000 If you could, please state your location and what frequencies you are quite sure you're connecting on.
There's also this thread: Where a user is unable to connect to B7 LTE
<MOD EDIT - Link Removed>
Because I'm from USA and it means the phone is completely useless there if box is correct.
Click to expand...
Click to collapse
I've communicated with Innos today. According to them the specs are as stated on their official page and through their selling partners. The box only reads the minimal frequencies so as to not confuse Chinese people where the majority of these phones are sold.
Of course, this isn't 100% solid. What we need is reports from people who own the phone, where they live and what kind of connectivity they're getting, especially from anyone in N/C/S Americas, but any reports from any locations are good.
I got my D6000 on saturday. My problem is, that the phone is always reebooting when you turn off the display. This happens in between 1-2 minutes after put the phone in standby. When i turn on flightmode the phone is not reebooting!! Maybe there is a bug with the modem. I use TELEKOM (t-mobile) in Germany.
The rom is version D6000_ROM_COMMON_V1.1 (Android Version 5.0.2).
Any ideas?
Hanz, that's a good guess that it's something with the radio or radio software. If I were you, I'd try the beta 5.1 and see if the problem continues. If it doesn't, then you know it's a software issue. If it does, it still might be a software issue (eg, if it's a driver or baseband issue and these files not changing between ROMs). I'm only recommending it as part of the process of elimination.
First you might want to try setting to WCDMA only, GSM only, LTE only, and see if it's an issue with more specific connectivity. If these options don't exist in mobile network settings, try to use this app https://play.google.com/store/apps/details?id=de.mangelow.network&hl=en