PREREQUISITES -
1. Two phones (one on which you want to flash rom/img, and other you'll use as host)(root is not required on host phone)
2. USB-C to USB-C cable, or USB-C to USB-A with OTG adaptor.
3. Some brain and patience.
PROCEDURE -
1. Install the app called "Bugjaeger" on an android phone you're going to use as host (root is not required)
2. Boot the phone to fastboot and connect the phone to host phone using USB-C to USB-C.
3. Open Bugjaeger app and go to the last tab.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. You'll see your device listed in the app, so select it from the list.
5. Thereafter press the bottom right blue button.
6. This will open up a terminal like interface, here type the command for flashing the boot img. Just type "fastboot flash boot" thereafter from the top, select the icon that looks like file attachment and select the boot img file.. No need to type the file location for file, it'll automatically be appended.
7.Press the button on the right and wait for the boot img to be flashed.
8. After it is done, boot to recovery, and select adb sideload option from recovery.
9. The phone should again be detected in the Bugjaeger app and be listed. Ensure its selected.
10. Now on the host phone, scroll to the bottom on the same tab to the last option that says "Pick file and perform sideload"
11. After selecting the ROM zip file, wait for it to be flashed, the progress will be displayed on the host phone, it will go till about 47% before the process is completed.
12. Reboot the phone and enjoy new ROM
CREDITS
All credit goes to the amazing developer @bugjaeger who developed this amazing app, allowing us to do such crazy things without the need of a computer.
Hello may you report the official download link?
sev7en said:
Hello may you report the official download link?
Click to expand...
Click to collapse
Bugjaeger Mobile ADB - USB OTG - Apps on Google Play
Tool to debug, dissect, shell into and control Android device or TV via USB/WiFi
play.google.com
Related
Hello guys since the android 6.0 update is out for this phone and many seemed to have issues upgrading it, i wrote down a guide on how to update it . Firstly there are two ways you can update your phone.
1) Via the wireless update app
2) Manually flashing the firmware
Steps:
1) Find the wireless update app on your phone and press check
2) You will be prompted to download the update file
3) Download.Install.Done.
If for some reason the first method does NOT work you can try this
1) Download the firmware file from here https://mega.nz/#!PQVWDaLZ!2ituEPLWpcAkbz9dR6dNk3E3rnl2z8YNELQ7xcYi7t0
2) Download the flash tool from here https://mega.nz/#!7AcjGCLY!5LtavmoUaz8N_GzRwJqhD9tWwRDapplAKu7TMmON7F4
3) Now open the flash tool by double clicking the SPMultiPortFlashDownloadProject.exe file
4) File -> Open Download Agent File and open this file MTK_AllInOne_DA.bin from this folder MDT_V1620_ForUpgrade
5) Click the button Scatter File and select the file MT6735M_Android_scatter which is located in
OUKITEL_K10000_V8.0_20160620 folder
6) Click Scan
7) Long press volume (+) key on your device (phone in power off state) and connect it to your PC. When green bar shows, scan successfully disconnect your phone.
8) Click Stop All and then Start All, when the small window finishes connect again your phone to the PC and the update will start automatically.
9) When the first line goes grey (COM 4 + COM 3) it means its completed.
Voila!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS: Please let me know if i am allowed to post the download links, if not i will upload them as attachments here!
Thank you.
Bypass Google Account Problem with K10000
Hi
After auto-update my Oukitel K10000 asks for google account I do not have (I have tried every known to me email but nothing happend). I have read all internet, have seen a lot of films - nothing.
1.I cannot enter the developer option (to enable USB) because tapping the build number does not work - ANY sugestions? or step-by-step method
2.I cannot install Quick Shortcut Maker Apk in any mode.
PLEASE help
Flash tool is down.
Edit:
Found alternatives here http://spmdttool.com/category/download
v5 is buggy.
Hi all!
After a lot of research of a flashable firmware of this phone i was considering to trashcan it, no one even know what phone it is!
But i have one, and i want to mod it, so stay tuned because something will happen
So what i did? I simply asked Trevi if they send me the firmware, and guess what? They actually did! Im surprised, really.
Well, this firmware is tested out by me, so it's 100% working!
ATTENTION: I'm not responsable for any damage that could happen to your phone
HOW TO:
1) Download THIS package, and extract "Trevi Phablet 5 S 0813" on your desktop/whereveryouwant
2) Open the extracted folder, go into Tool and Driver
3) Open "6577 usb driver" and install them
4) Use THIS version of flashtool, so download it and extract the folder on your desktop/whereveryouwant
5) Open flashtool, select scatter loading, it ll appear a window, search for "Trevi Phablet 5 S 0813" that you extracted before, go into "software" - > " Phablet 5 S 20130716_e1909l_v77_tmx_trevi_6628_v20" -> select "MT6577_Android_scatter_emmc"
6) It should appear like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7) Power off your Trevi Phablet 5S (remove the battery for doublechek that is off)
8) Click "Download" into Flashtool and AFTER, connect your Trevi (if you messed up with partition like me, do "Firmware -> Upgrade", it ll rewrite PMT Layout completely)
9) Wait some moments, all the system is being loaded onto your phone
10) If all went well, you should see this:
If you see like so, just unplug the phone, and power it on
If you don't see like so, just post here the error, and we ll find a solution to make your Trevi Phablet 5S work again ^^
Hope everything is clear and understandable, if not just ask ^^
[port] twrp 2.8.2.0
I managed to port TWRP for this Phablet
So we can now try custom rom, at least try to port it
Hope it can be useful
Bugs:
- You tell me
Download:
- HERE
HOW TO:
- Open Flashtool (First post download link)
- Select again the same scatter file as before
- UNCHECK all voices exept "RECOVERY"
- Download the recovery up here
- click on "RECOVERY", it show up a window, just navigate where's recovery downloaded, and select it
- press "Download"
- Shut down the phone (double check removing battery)
- attach it to the pc via usb cable
- wait some second, if a green circle appear just remove the usb cable, press VOL + and POWER BUTTON to enter recovery
- have fun!
ALERTS: TWRP need more space in recovery partition, you may lost your IMEI, you have been warned, so make a full backup before proceed
Thanks to
@yuweng for his amazing tool
@Dees_Troy for bring up TWRP
Reserved2
Sahara fail error occurred in lenovo k5 plus...
XDA Visitor said:
Sahara fail error occurred in lenovo k5 plus...
Click to expand...
Click to collapse
i have not tried this method but this is what i could come across while searching in xda forums....
you may also register yourself at XDA and search more or check this thread http://forum.xda-developers.com/android/general/unbrick-vibe-k5-plus-qfil-qpst-method-t3467830
IMPORTANT : First of all you should always have all the drivers installed on your PC.
READ EVERYTHING CAREFULLY AND MAKE SURE YOU HAVE FOLLOWED THE STEPS CAREFULLY AND THEN POST QUERIES.[/COLOR]
The following drivers are needed for this task:
1. Lenovo USB Drivers.
2. QDLoader QFIL Drivers
Search for them on google and you will find them very easily. Most of the time they are there in the stock rom zip folder under a folder named Drivers.
Install all of them.
1. Download the Stock ROM you need for your phone from here:
DOWNLOAD STOCK FIRMWARE (Thanks to Shreps)
2. Extract the above zip to a folder. You will get three folders: Drivers, Images and Tools.
3. From the Drivers folder, Install all drivers.
4. From the Tools folder, install the QPST Tool. In your Start Menu it will come as QFIL. Don't worry about that.
5. Power Off your device.
6. Open QFIL TOOL.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Now On top you will see two options: 1. Flat Build 2. Meta Build
Select FLAT BUILD
8. In "PROGRAMMER PATH" click Browse and go to the folder named Images and select the one file it displays (something like prog_emmc....mbn).
9. Now click "Load XML" and select "rawprogram0.xml" file and then another dialog box will open. Here select "patch0.xml".
PC WORK IS DONE. DO NOT CLICK DOWNLOAD.
Your device should be switched off.
NOTE CAREFULLY: Hold "VOLUME UP + VOLUME DOWN" key (Do not press POWER button). and connect the USB Cable from PC to the phone.
Your phone should now display RED LED LIGHT and the QFIL Tool should now change from NO PORT to QUALCOMM.....Something like that.
You are now ready. Click on Download button on QFIL TOOL and then wait for atleast 15 minutes.
After the dialog at bottom shows "DOWNLOAD SUCCESSFUL" in blue color, UNPLUG your device. Wait for a few seconds or a minute and then POWER ON your device.
First boot takes about 8-10 minutes.
GitHub: https://github.com/yadev64/GMADB
Current version: GMADB v0.2 Beta
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GMADB is a GUI based Minimal ADB that helps you work on modifying your Android device via the Android Debug Bridge. This program helps you to speed up your process of sideloading an update to your android device by making the UX easier. It has four main functionalities:
1. Select and Flash - This allows you to simply select the .zip or .img file of the update and flash it with just a single click. All the process happening will be displayed on the blackBoard (the big black textbox that looks like a terminal window).
2. ADB Devices - With one click, it displays all the available/connected devices on Android Debug Bridge (ADB).
3. Custom Command - This helps you to execute custom shell commands from the app, making it easier for you to do any operation without going to cmd.
4. Log recorder - The application generates a log file of all your activities, which will help you to debug or evaluate all the errors, outputs and everything that was on the blackBoard. (Will be available from the next update)
Click to expand...
Click to collapse
Example: Let's assume that you want to install a custom rom (assume, HentaiOS) on your phone (assume Redmi Note 7 pro).
step 1: Click on the "Select ROM" button. Select the .zip file from the file explorer window that opens up. The selected filename will be displayed and the Flash button will become active (Bright green color).
step 2: Click the "Flash" Button. Wait for the process to complete. Do not close the window until you see the success message on the screen. (In the current version, real-time process output streaming is not available (will be fixed in the upcoming updates), so DO-NOT close the window assuming that the process is not happening. Please refer the phone for the process progress information.)
Click to expand...
Click to collapse
Known bugs:
1. The results/output shown on blackBoard is not real-time. Output appears only after the completion of the process
2. Runs on a single thread
3. Log Generator yet to be implemented
Click to expand...
Click to collapse
Thanks to:
1. *Google for developing ADB and Fastboot
2. shimp208 for the minimal ADB
Click to expand...
Click to collapse
Are you a developer and want to contribute? Click here for the GitHub Repo
Download: GMADB v0.2 Beta
does this installs adb drivers? btw thank you
SAFTY INFORMATION: Whatever you do, its on your own responsibility. Your warranty might be void and there is the risk of bricking your device!
So this is what I did:
Tools
Magisk-v25.2.apk
Latest M3X Firmware
ADB Tools
EDL.py
Click to expand...
Click to collapse
Extract the boot.img from M3X Firmware V1.62- Do not open, just copy.zip
Copy the Magisk-v25.2.apk and boot.img to your Shanling M3X
Install the Magisk-v25.2.apk
In Magisk press "Install" in the upper right corner
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On "Method" select "Select and Patch a File" and choose your boot.img then press "Let's Go"
Spoiler
When Magisk is done, you can close the App and transfer the patched boot.img to your PC.
On your M3X, activate Developer Mode. Settings > About device > Tap multiple times on the Build number
In Developer Options, activate USB debugging
On your PC extract the platform-tools.zip and install EDL.py
Plug the M3X into your computer with a good USB cable. You may be promted to allow USB debugging on the M3X - check "Always allow from this computer" and OK
Open a Command/Terminal window and navigate to your platform-tools folder
Use following command
Code:
adb reboot edl
the display of your M3X will now turn black
In the Command/Terminal window navigate to your EDL.py installation
From now on you could brick your device, please advance only if you know what you are doing!
I would highly recommend to do a backup of everything with the commands mentioned on the EDL Github site
14. Use following command to dump your stock boot.img
Code:
edl r boot boot.img
the stock boot.img will appear in your EDL folder, move to a safe space.
15. Now copy your Magisk patched boot.img into the EDL folder and run following command:
Code:
edl w boot boot.img
16. When EDL is done, you can disconnect your M3X. You might need to hold the powerbutton for 20-30 seconds until it leaves edl mode and starts booting.
17. Congratulations! You rooted your M3X
Further information: There seems to be a undocumented method using the tool "QFIL" but I dont know anything about it. Might ne worth a try.
Have fun
Thanks for this tutorial. Can you drop some screen shots and an overview of what you're able to change now that you're rooted.
I've been thinking of getting a HiBy R6. But it being on Android 9 is annoying. My guess is if I can get it rooted, that it's possible to update to a newer version of Android.
Hi, I’m trying to root my M3 Ultra with this method but I’m facing a problem.
On windows when trying to enter « edl r boot boot.img » it says me that « r » is not a command…
Any help would be really appreciated please
Thanks in advance for replying