Hi all!
After a lot of research of a flashable firmware of this phone i was considering to trashcan it, no one even know what phone it is!
But i have one, and i want to mod it, so stay tuned because something will happen
So what i did? I simply asked Trevi if they send me the firmware, and guess what? They actually did! Im surprised, really.
Well, this firmware is tested out by me, so it's 100% working!
ATTENTION: I'm not responsable for any damage that could happen to your phone
HOW TO:
1) Download THIS package, and extract "Trevi Phablet 5 S 0813" on your desktop/whereveryouwant
2) Open the extracted folder, go into Tool and Driver
3) Open "6577 usb driver" and install them
4) Use THIS version of flashtool, so download it and extract the folder on your desktop/whereveryouwant
5) Open flashtool, select scatter loading, it ll appear a window, search for "Trevi Phablet 5 S 0813" that you extracted before, go into "software" - > " Phablet 5 S 20130716_e1909l_v77_tmx_trevi_6628_v20" -> select "MT6577_Android_scatter_emmc"
6) It should appear like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7) Power off your Trevi Phablet 5S (remove the battery for doublechek that is off)
8) Click "Download" into Flashtool and AFTER, connect your Trevi (if you messed up with partition like me, do "Firmware -> Upgrade", it ll rewrite PMT Layout completely)
9) Wait some moments, all the system is being loaded onto your phone
10) If all went well, you should see this:
If you see like so, just unplug the phone, and power it on
If you don't see like so, just post here the error, and we ll find a solution to make your Trevi Phablet 5S work again ^^
Hope everything is clear and understandable, if not just ask ^^
[port] twrp 2.8.2.0
I managed to port TWRP for this Phablet
So we can now try custom rom, at least try to port it
Hope it can be useful
Bugs:
- You tell me
Download:
- HERE
HOW TO:
- Open Flashtool (First post download link)
- Select again the same scatter file as before
- UNCHECK all voices exept "RECOVERY"
- Download the recovery up here
- click on "RECOVERY", it show up a window, just navigate where's recovery downloaded, and select it
- press "Download"
- Shut down the phone (double check removing battery)
- attach it to the pc via usb cable
- wait some second, if a green circle appear just remove the usb cable, press VOL + and POWER BUTTON to enter recovery
- have fun!
ALERTS: TWRP need more space in recovery partition, you may lost your IMEI, you have been warned, so make a full backup before proceed
Thanks to
@yuweng for his amazing tool
@Dees_Troy for bring up TWRP
Reserved2
Related
A. TUTORIAL ROOT
TOOLS AND MATERIALS :
Driverhttp://ge.tt/8sELSyg/v/3
Binary Root Toolhttp://www.4shared.com/archive/4-yfGgH3/Root_with_Restore_by_Bin4ry_v1.htm
STEP WORK:
Make sure your phone is in USB Debugging is checked state (settings / development / here)
Source Unknown tick (setting security / Unknown Source)
Make sure the driver is installed correctly in leptop / PC
Extract results donwload Binary file Root Tool then click RunMe.bat
A command prompt will open and you select number 1. Normal, wait until you appear in hp T1E notification, then select restore my data is, then a few moments later your phone will reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After reboot check if superuser app is already available? If he immediately tests with applications that require root privileges. If the application runs, you've survived phone Root well.
B. TUTORIAL INSTALL CWM
TOOLS AND MATERIALS :
Mod Recovery
Driverhttp://ge.tt/8sELSyg/v/3
SP Flahs Toolttp://ge.tt/5Edn9gh?c
STEP WORK:
Download all the above ingredients, make sure leptop / pc has its drivers installed correctly
Then extract Mod Recovery.zip, (boot.img, recovery.img and open the file created Scatter)
Open SP Flash Tool.exe
Then enter the file Scatter file created on the left kollom scatter loading.
Then check BOOTIMG, then click and enter the boot.img file that you have downloaded earlier.
Then check back RECOVERY section and click then enter the recovery file that you have downloaded earlier.
And connect it to the leptop / pc hp are turned off, waiting indication in SP Flash TOOL detect your phone
Then press the Download / F9 in SP Flash Tool, wait until the process is complete.
If all processes are finished, enter cwm do the test in the off state by press the power button + volume up. If successful it will look like this
All credits to Rua1, super-mega brain and MTKdroidTools creator.
=============================================================================================
How Nandroid Backup via CWM?
Enter cwm (phone off using the power button + volume combining up)
Use the navigation on the bottom with volume up + down keys, the enter key to power
Select backup & restore
Then select the backup to internal sdcard, wait until all processes are running without any error
And select reboot system now
if all goes well the process, then there will be a new folder on your sdcard named "ClockworkMod" then in that folder there is a data folder backup your rom. example the folder name 2013-08-06.03.17.56
Great job and wonderful mastah. Very helpful :good:
bacrot78 said:
Great job and wonderful mastah. Very helpful :good:
Click to expand...
Click to collapse
Tqs.... Masta tonk pank :v
So after like months of waiting, ASUS finally released the LOLLIPOP upgrade for Zenfone 6 but unfortunately it's only for the TW version. So here, I'm gonna teach you how to change your SKU.
Follow my Instuction and You and your phone should be fine.
(Still, do it on your own risk, I'm not gonna be the one responsible for any damaged phone or damaged brain or whatsoever, I'm just trying to help so please try to appreciate it.)
WHAT YOU NEED
1.Rooted Zenfone
2.Installed ADB
3.Installed USB and Intel driver (Google it)
4.ADB fastboot tool
5.Recovery Image of the Firmware you want to change your SKU to, example : If you want to change from CN to WW download the WW recovery file.
Click HERE
6.Download the Firmware of the SKU you want to change to, like if you want to change to WW download the WW firmware. HERE
BEWARE : YOU MUST DOWNLOAD THE SAME VERSION OF RECOVERY WITH THE FIRMWARE YOU WANT OR ELSE YOU'LL BRICK YOUR DEVICE.
INSTRUCTION
1. Copy the recovery that you've download to the adb folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Turn off your device and boot to droidboot (Press and hold Power + Volume [+] buttons) and then connect it to your pc.
3. Open cmd on adb folder. (Press shift+Right Click on the adb folder and dont close the cmd , we'll need it later.)
4.Do flash recovery img.
fastboot flash recovery [the recovery name].img
Click to expand...
Click to collapse
5. Reboot to Recovery, when you see the Android guy with exclamation mark press [+] and [-] volume button at the same time like 2 seconds and release.
6. Choose "apply update from adb" and then upload your firmware through cmd.
adb sideload [the firmware that you've downloaded earlier].zip
Click to expand...
Click to collapse
7. It will feel like it stuck but just wait for it.
8. do wipe data/factory reset
9. Reboot.
10. And you're done !!
How to change to upgrade to Lollipop 5.0
1. Please make sure to update your software version to V2.22.40.44 first before update to software version V3.23.40.52.
2. Download the firmware. Here
3. Extract it and make sure the zip file ended with "-user-" in the of it.
4. Put it on in the root of your internal memory.
5. Remove your phone from pc and an exclamation mark will appear on the statusbar.
6. Put your phone to Plane Mode and turn off wifi connection.
7. Apply the update, booting will take some time but just be patient.
8. YAYYYY YOU HAVE LOLLIPOP ON ZENFONE 6 !
SCREENSHOT ON SECOND POST.
SCEENIE(S)
You forgot to mention to flash fastboot.img as well.
Hello guys since the android 6.0 update is out for this phone and many seemed to have issues upgrading it, i wrote down a guide on how to update it . Firstly there are two ways you can update your phone.
1) Via the wireless update app
2) Manually flashing the firmware
Steps:
1) Find the wireless update app on your phone and press check
2) You will be prompted to download the update file
3) Download.Install.Done.
If for some reason the first method does NOT work you can try this
1) Download the firmware file from here https://mega.nz/#!PQVWDaLZ!2ituEPLWpcAkbz9dR6dNk3E3rnl2z8YNELQ7xcYi7t0
2) Download the flash tool from here https://mega.nz/#!7AcjGCLY!5LtavmoUaz8N_GzRwJqhD9tWwRDapplAKu7TMmON7F4
3) Now open the flash tool by double clicking the SPMultiPortFlashDownloadProject.exe file
4) File -> Open Download Agent File and open this file MTK_AllInOne_DA.bin from this folder MDT_V1620_ForUpgrade
5) Click the button Scatter File and select the file MT6735M_Android_scatter which is located in
OUKITEL_K10000_V8.0_20160620 folder
6) Click Scan
7) Long press volume (+) key on your device (phone in power off state) and connect it to your PC. When green bar shows, scan successfully disconnect your phone.
8) Click Stop All and then Start All, when the small window finishes connect again your phone to the PC and the update will start automatically.
9) When the first line goes grey (COM 4 + COM 3) it means its completed.
Voila!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS: Please let me know if i am allowed to post the download links, if not i will upload them as attachments here!
Thank you.
Bypass Google Account Problem with K10000
Hi
After auto-update my Oukitel K10000 asks for google account I do not have (I have tried every known to me email but nothing happend). I have read all internet, have seen a lot of films - nothing.
1.I cannot enter the developer option (to enable USB) because tapping the build number does not work - ANY sugestions? or step-by-step method
2.I cannot install Quick Shortcut Maker Apk in any mode.
PLEASE help
Flash tool is down.
Edit:
Found alternatives here http://spmdttool.com/category/download
v5 is buggy.
Sahara fail error occurred in lenovo k5 plus...
XDA Visitor said:
Sahara fail error occurred in lenovo k5 plus...
Click to expand...
Click to collapse
i have not tried this method but this is what i could come across while searching in xda forums....
you may also register yourself at XDA and search more or check this thread http://forum.xda-developers.com/android/general/unbrick-vibe-k5-plus-qfil-qpst-method-t3467830
IMPORTANT : First of all you should always have all the drivers installed on your PC.
READ EVERYTHING CAREFULLY AND MAKE SURE YOU HAVE FOLLOWED THE STEPS CAREFULLY AND THEN POST QUERIES.[/COLOR]
The following drivers are needed for this task:
1. Lenovo USB Drivers.
2. QDLoader QFIL Drivers
Search for them on google and you will find them very easily. Most of the time they are there in the stock rom zip folder under a folder named Drivers.
Install all of them.
1. Download the Stock ROM you need for your phone from here:
DOWNLOAD STOCK FIRMWARE (Thanks to Shreps)
2. Extract the above zip to a folder. You will get three folders: Drivers, Images and Tools.
3. From the Drivers folder, Install all drivers.
4. From the Tools folder, install the QPST Tool. In your Start Menu it will come as QFIL. Don't worry about that.
5. Power Off your device.
6. Open QFIL TOOL.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Now On top you will see two options: 1. Flat Build 2. Meta Build
Select FLAT BUILD
8. In "PROGRAMMER PATH" click Browse and go to the folder named Images and select the one file it displays (something like prog_emmc....mbn).
9. Now click "Load XML" and select "rawprogram0.xml" file and then another dialog box will open. Here select "patch0.xml".
PC WORK IS DONE. DO NOT CLICK DOWNLOAD.
Your device should be switched off.
NOTE CAREFULLY: Hold "VOLUME UP + VOLUME DOWN" key (Do not press POWER button). and connect the USB Cable from PC to the phone.
Your phone should now display RED LED LIGHT and the QFIL Tool should now change from NO PORT to QUALCOMM.....Something like that.
You are now ready. Click on Download button on QFIL TOOL and then wait for atleast 15 minutes.
After the dialog at bottom shows "DOWNLOAD SUCCESSFUL" in blue color, UNPLUG your device. Wait for a few seconds or a minute and then POWER ON your device.
First boot takes about 8-10 minutes.
PREREQUISITES -
1. Two phones (one on which you want to flash rom/img, and other you'll use as host)(root is not required on host phone)
2. USB-C to USB-C cable, or USB-C to USB-A with OTG adaptor.
3. Some brain and patience.
PROCEDURE -
1. Install the app called "Bugjaeger" on an android phone you're going to use as host (root is not required)
2. Boot the phone to fastboot and connect the phone to host phone using USB-C to USB-C.
3. Open Bugjaeger app and go to the last tab.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. You'll see your device listed in the app, so select it from the list.
5. Thereafter press the bottom right blue button.
6. This will open up a terminal like interface, here type the command for flashing the boot img. Just type "fastboot flash boot" thereafter from the top, select the icon that looks like file attachment and select the boot img file.. No need to type the file location for file, it'll automatically be appended.
7.Press the button on the right and wait for the boot img to be flashed.
8. After it is done, boot to recovery, and select adb sideload option from recovery.
9. The phone should again be detected in the Bugjaeger app and be listed. Ensure its selected.
10. Now on the host phone, scroll to the bottom on the same tab to the last option that says "Pick file and perform sideload"
11. After selecting the ROM zip file, wait for it to be flashed, the progress will be displayed on the host phone, it will go till about 47% before the process is completed.
12. Reboot the phone and enjoy new ROM
CREDITS
All credit goes to the amazing developer @bugjaeger who developed this amazing app, allowing us to do such crazy things without the need of a computer.
Hello may you report the official download link?
sev7en said:
Hello may you report the official download link?
Click to expand...
Click to collapse
Bugjaeger Mobile ADB - USB OTG - Apps on Google Play
Tool to debug, dissect, shell into and control Android device or TV via USB/WiFi
play.google.com