Database Info

[How-To] Update your K10000 to Android 6.0

Hello guys since the android 6.0 update is out for this phone and many seemed to have issues upgrading it, i wrote down a guide on how to update it . Firstly there are two ways you can update your phone.
1) Via the wireless update app
2) Manually flashing the firmware
Steps:
1) Find the wireless update app on your phone and press check
2) You will be prompted to download the update file
3) Download.Install.Done.
If for some reason the first method does NOT work you can try this
1) Download the firmware file from here https://mega.nz/#!PQVWDaLZ!2ituEPLWpcAkbz9dR6dNk3E3rnl2z8YNELQ7xcYi7t0
2) Download the flash tool from here https://mega.nz/#!7AcjGCLY!5LtavmoUaz8N_GzRwJqhD9tWwRDapplAKu7TMmON7F4
3) Now open the flash tool by double clicking the SPMultiPortFlashDownloadProject.exe file
4) File -> Open Download Agent File and open this file MTK_AllInOne_DA.bin from this folder MDT_V1620_ForUpgrade
5) Click the button Scatter File and select the file MT6735M_Android_scatter which is located in
OUKITEL_K10000_V8.0_20160620 folder
6) Click Scan
7) Long press volume (+) key on your device (phone in power off state) and connect it to your PC. When green bar shows, scan successfully disconnect your phone.
8) Click Stop All and then Start All, when the small window finishes connect again your phone to the PC and the update will start automatically.
9) When the first line goes grey (COM 4 + COM 3) it means its completed.
Voila!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS: Please let me know if i am allowed to post the download links, if not i will upload them as attachments here!
Thank you.

Bypass Google Account Problem with K10000
Hi
After auto-update my Oukitel K10000 asks for google account I do not have (I have tried every known to me email but nothing happend). I have read all internet, have seen a lot of films - nothing.
1.I cannot enter the developer option (to enable USB) because tapping the build number does not work - ANY sugestions? or step-by-step method
2.I cannot install Quick Shortcut Maker Apk in any mode.
PLEASE help

Flash tool is down.
Edit:
Found alternatives here http://spmdttool.com/category/download
v5 is buggy.

[FLASHTOOL] Trevi Phablet 5S Flashable Firmware + TWRP 2.8.2.0

Hi all!
After a lot of research of a flashable firmware of this phone i was considering to trashcan it, no one even know what phone it is!
But i have one, and i want to mod it, so stay tuned because something will happen
So what i did? I simply asked Trevi if they send me the firmware, and guess what? They actually did! Im surprised, really.
Well, this firmware is tested out by me, so it's 100% working!
ATTENTION: I'm not responsable for any damage that could happen to your phone
HOW TO:
1) Download THIS package, and extract "Trevi Phablet 5 S 0813" on your desktop/whereveryouwant
2) Open the extracted folder, go into Tool and Driver
3) Open "6577 usb driver" and install them
4) Use THIS version of flashtool, so download it and extract the folder on your desktop/whereveryouwant
5) Open flashtool, select scatter loading, it ll appear a window, search for "Trevi Phablet 5 S 0813" that you extracted before, go into "software" - > " Phablet 5 S 20130716_e1909l_v77_tmx_trevi_6628_v20" -> select "MT6577_Android_scatter_emmc"
6) It should appear like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7) Power off your Trevi Phablet 5S (remove the battery for doublechek that is off)
8) Click "Download" into Flashtool and AFTER, connect your Trevi (if you messed up with partition like me, do "Firmware -> Upgrade", it ll rewrite PMT Layout completely)
9) Wait some moments, all the system is being loaded onto your phone
10) If all went well, you should see this:
If you see like so, just unplug the phone, and power it on
If you don't see like so, just post here the error, and we ll find a solution to make your Trevi Phablet 5S work again ^^
Hope everything is clear and understandable, if not just ask ^^
​

[port] twrp 2.8.2.0
I managed to port TWRP for this Phablet
So we can now try custom rom, at least try to port it
Hope it can be useful
Bugs:
- You tell me
Download:
- HERE
HOW TO:
- Open Flashtool (First post download link)
- Select again the same scatter file as before
- UNCHECK all voices exept "RECOVERY"
- Download the recovery up here
- click on "RECOVERY", it show up a window, just navigate where's recovery downloaded, and select it
- press "Download"
- Shut down the phone (double check removing battery)
- attach it to the pc via usb cable
- wait some second, if a green circle appear just remove the usb cable, press VOL + and POWER BUTTON to enter recovery
- have fun!
ALERTS: TWRP need more space in recovery partition, you may lost your IMEI, you have been warned, so make a full backup before proceed
Thanks to
@yuweng for his amazing tool
@Dees_Troy for bring up TWRP

Reserved2

[Recovery] [SP FLASH TOOL]TWRP v3.0.0.3 - Lenovo K3 NOTE [100% Working]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installing custom recovery TWRP on K3 Note using SP Flash Tool (TUTORIAL With VIDEO)
Download Link [SP FLASH TOOL + TWRP v3.0.0.3 + USB Drivers] :- http://viid.me/qr1zo5
First, get your PC ready:
1. Download and Install "LenovoUsbDriver_v1.1.13.exe", then Restart pc.
2. Download and extract "SP_Flash_Tool_exe_Windows_v5.1452.00.000.zip" using Winrar
3. Open SP Flash Tool (Double click on flash_tool.exe from inside the SP Flash Tool folder)
4. Go to Options > Option... > Download > Tick "DA DL All with Checksum" > Close the options box
5. Close SP Flash Tool
Now, the flashing part:
1. Download and Extract "TWRP_v3.0.0-3_for_SP_Flash_Tool.zip" *
2. Open SP Flash Tool, and From "Download" Tab click on "Scatter-Loading"
3. Browse the TWRP v3.0.0-3 folder and select the "MT6752_Android_scatter.txt" file > Ok **
4. Click on "Download" icon
5. Completely turn off your phone (BUT DO NOT REMOVE BATTERY) and connect it to PC using usb cable.
6. Wait till the Process completes and a "Download ok" box will appear with a green tick. Disconnect the phone from cable.
Done!
Now press and hold VolumeUp+VolumeDown+PowerButton all three buttons at one untill you see the "TWRP" logo.
The phone will boot into custom recovery you just installed.
VIDEO TUTORIAL​https://www.youtube.com/embed/3YS_L1BVpMs​
** You can also flash ROW/CUSTOM roms (which are made ready for SP FLASH TOOL) using this method. For that, Just select the scatter file inside the ROM folder
Thank You !!​​

How to install stock firmware in Micromax Canvas Infinity (HS2) using QFIL tool

There are many tutorials online showing installation of stock firmware fro Canvas Infinity, but none of them are accurate and causes many errors on following them. So, I experimented and was successful at last. So, here is the tutorial to install stock firmware in Canvas Infinity.
Required Files:
1) QPST Flash tool - Download Link
2) Qualcomm Drivers - Download Link
3) ADB - View attachment ADB_INSTALL.zip
4) Canvas Infinity Stock Firmware - Download Link
Micromax_HS2_SW_V5_HW_V1.0_08042017_QFIL.zip - Link 1
Micromax_HS2_SW_V6_HW_V1.0_08292017_QFIL.zip - Link 1 - Link 2
Follow these steps:
1) Install QPST FLash tool from the link.
2) Install Qualcomm drivers.
3) Unzip the firmware and copy the firmware to "C:\Program Files\QPST\bin" folder.
4) Open the QFIL.exe in the same bin folder and run it as administrator.
5) Choose the flat build.
6) Then it will automatically choose all files from the firmware folder like below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7) Now, enter your phone into EDL mode. There two methods to go into EDL (Emergency Download) mode.
Don't turn off the phone. Enable USB Debugging. Connect the phone to the PC. Start cmd in the ADB folder and enter command "adb reboot edl". And the notification LED will start blinking.
Turn off your phone. Press Volume UP and Volume Down button together. Hold them and connect the phone to PC using USB and immediately press power for 3 seconds. And the notification LED will start blinking.
8) If you see "Qualcomm HS-USB QDLoader 9008 (COM _ )" on the top then immediately press the download button. Don't press the download button unless it is "Qualcomm HS-USB QDLoader 9008".
9) On finishing it will show a success message. Then disconnect your phone and reboot.
I hope this tutorial will be helpful.
If the following errors occur:
1) If USB not recognized and descriptor failed then try going to EDL mode using ADB.

It's not working for me
I do this process many time , but it's not working always it shows something "sahara failed" ,
Can anybody give me a stock rom zip that could be installed from CWM /TWRP , or PREVIOUSLY BACKED UP ROM ...

Can i install this zip file via TWRP
I'm newbie ,plz tell me,can i flash this zip file using TWRP recovery, or i hv to use kitchen-Android whatever to make a twrp flashable zip...

Micromax Canvas infinity H2S any custom rom available?

[How-To] Flash Stock Rom (Ulefone Armor 6)

In this guide, I will be showing you how to flash back to the stock rom using the SP Flash tool.
Disclaimer:
I am not responsible if you damage, brick, or willingly alter your phone in any way shape or form blah blah blah, you get the point.
Prerequisites:
Make sure you have drivers installed, here.
To begin with, open up the SP Flash Tool.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then add the, "MTK_AllInOne_DA.bin" file in the, "DA file name" section.
You have now added the, "MTK_AllInOne_DA.bin" File. Now, add the scatter file with the partitions to flash stock files in.
This is important key to the process, so pay attention. Before we "find" the phone in download mode/upgrade mode, you have to turn the phone off, and hit the scan button first before plugin in your phone to the computer. Click yes to begin the scanning process.
Now plug in the phone to the computer, using your USB Type C cable, and then SP Flash Tools program will detect the phone, and put it in Download/upgrade mode.
Now that the program has placed the phone in Download/Upgrade mode, you have to unplug the phone from the computer, in order to verify/scan the files needed to flash.
Once the program finished verifying the files, you can then plug in the phone once more. It will then begin flashing the phone.
This is now the final screen you will see when the phone has completed flashing. Once you see, "DL(userdata)ok" that means the phone successfully completed flashing. All you have to do now, is press the power button until the phone powers on.

A few clarifications that may save some folks from the headache I just dealt with:
Before starting, ensure you have downloaded the stock image for the 6 or 6e from the Ulefone website or from the links on the main thread. Power the device off.
1. The MTK_AllInOne_DA.bin file will be located inside of the same directory as the flashing software. The scatter file will be inside of the archive the stock image is in. Make sure you have the correct one if you are using the 6e.
2. If you get an error when selecting the scatter file, pull the folder "Armor_6E_RF3_V01_user_20190516" (name will vary) out of its parent directory. (I do not know why this works). The flashing software will pull up a command line when the file is successfully added.
3. After selecting scan, respond "Yes" to the prompt that comes up before connecting the phone. The phone will not display anything while in download mode.
4. After the message, "scan success!" appears, select "Start all" to start the checksum verification process. Once it has finished, plug in (or unplug, then re-plug) the device and take a deep breath.
Hopefully this information based off of my experience is helpful.