Hello
I use an external screen via the USB C port (usb C/HDMI cable), it works as advertised (Samsung Dev X,...)
I would like a USB C port replicator that allows external screen + Power tablet power supply (I found one, but it no longer works for the external screen)
Do you have a model to recommend to me?
Thanks in advance
I got this one from Best Buy
https://www.bestbuy.com/site/belkin-usb-c-4-in-1-multiport-adapter-gray/6452574.p?skuId=6452574&loc=pdpShare&ref=app_android
Related
[Q] Q: USING HDMI & USB peripheral ( ext HDD ) at the same time on Galaxy Tab 2 10.1
Hi Guys,
Do not get me wrong, I have been searching online for the samsung adapter that would allow several simultaneous conections like: HDMI to LED TV and to external USB HDD. In the perfect world there would also be a connection for power supply.
I could only found the HDMI out + power supply but without USB support. --> The cable is officially called "Samsung HDTV Adapter Cable (EPL 3PHP) "
And then I also found only Samsung connector to USB but without HDMI & power supply. --> The cable is officially called "OTG USB Host Cable Adapter for Samsung Galaxy"
Has somebody found an adapter that suits all my needs?
Ok, if there is no other option, then I have one more question.
Will this combination work?
EPL-3PHP + EPL 1PLR --> can I combine the two cable adapters ( For playing cartoons, movies from external HDD to my LED TV via HDMI )
If this combination works then I will only miss the power supply.
I wanted to posted some url's to Amazon so you could see which cables/donlges/adaters I am reffering to but I cannot because I have not yet reached 10 posts on XDA :silly:
I hope I articulated myself and that you guys will understand what I would like to have.
Thanks in advance, Jus
same
jusselan said:
Hi Guys,
Do not get me wrong, I have been searching online for the samsung adapter that would allow several simultaneous conections like: HDMI to LED TV and to external USB HDD. In the perfect world there would also be a connection for power supply.
I could only found the HDMI out + power supply but without USB support. --> The cable is officially called "Samsung HDTV Adapter Cable (EPL 3PHP) "
And then I also found only Samsung connector to USB but without HDMI & power supply. --> The cable is officially called "OTG USB Host Cable Adapter for Samsung Galaxy"
Has somebody found an adapter that suits all my needs?
Ok, if there is no other option, then I have one more question.
Will this combination work?
EPL-3PHP + EPL 1PLR --> can I combine the two cable adapters ( For playing cartoons, movies from external HDD to my LED TV via HDMI )
If this combination works then I will only miss the power supply.
I wanted to posted some url's to Amazon so you could see which cables/donlges/adaters I am reffering to but I cannot because I have not yet reached 10 posts on XDA :silly:
I hope I articulated myself and that you guys will understand what I would like to have.
Thanks in advance, Jus
Click to expand...
Click to collapse
Hi I'm trying do the same thing, I'm working on a project on my car I did that before with Archos Tablet but the archos had a 3G usb that could use as USB Storage and also the Archos has HDMI output , I did some search and I saw I guy saying he tried to do but the galaxy tab wont work with both connected at same time, Then I discovered there is a Adaptor call mobidapter it may be the solution to try connect the Hard drive where the mini SD card goes but this adapter is discontinued, you can't find do buy anymore I sent a email to them but they say they dont have it anymore , so I dont know what to do.
Hello, we all know that there are USB OTG Cables with extra power plug (Y cable) but those are supposed to power external device like HDD, DVD, or anything what consumes more power than our android device can handle.
But my question is: is there any USB OTG cable with additional power plug but for simultaneous tablet / phone charging while USB stick is used?
I want to watch something long (i.e. TV Show series) from USB stick via OTG cable but I cannot simultaneously charge my tablet, so if it take too long my tablet will be out of power before I stop watching.
blackfire74 said:
Hello, we all know that there are USB OTG Cables with extra power plug (Y cable) but those are supposed to power external device like HDD, DVD, or anything what consumes more power than our android device can handle.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2617692
Roma-ES said:
http://forum.xda-developers.com/showthread.php?t=2617692
Click to expand...
Click to collapse
That means I have to add a resistor only to usb connector or just need a different kernel, or both?
On the native firmware say that this support function is disabled. Personally, I use this CivZ-FLEX-ЛУЧ-REV3.6.2 + SphereXtreme, where works flawlessly with OTG + charging resistor 64.9 K.
I call BS!!!!
I have a stock firmware, and have been using all kinds of USB cables. Found the best are made from Sony/Ericson and Blackberry. Once you have a quality cable your charging issues will go away.
Right now I am using a 7 foot cable that is from a Sony. No charging issues and works perfectly.
Lately I found another MHL cable 2hich is called HDMI to Micro HDMI, and that micro HDMI plug looks exactly like micro USB. Will such cable work with Note 8 properly without additional power?
The version of MHL our device supports requires a power source external to the tablet. That means the adapter itself needs to provide the power (battery or power adapter) or can pull enough off the HDMI cable, which is usually not enough juice to run the connection.
MicroHDMI and MicroUSB are also not physically compatible (won't fit the same port and different pin outs) even if they look so much a like. MHL typically uses MicroUSB at one end and full sized HDMI at the other.
Roma-ES said:
On the native firmware say that this support function is disabled. Personally, I use this CivZ-FLEX-ЛУЧ-REV3.6.2 + SphereXtreme, where works flawlessly with OTG + charging resistor 64.9 K.
Click to expand...
Click to collapse
This is correct u need to put a 63-65 k resistor between ground and Id pin(pin 4 &5) on USB connector. Doesn't work on civatos 4.4.2 as of now. USB host works fine with regular USB host cable but no charging when u use a y cable. I use civatos 4.2.2 kernel also. Works on yyks note 2 4.3 port also..
I have test multiple times. I use a USB dac in car and need charging and USB host.
what resistor should i use on my sghi257m samsung galaxy s4 mini otg usb cable?
on my dads galaxy s5 Active it shows message that says: Do you wanna enable power sharing
is that OTG? on my S4mini nothing pops up
I know this thread is really old but i want to use a USB DAC so need at cable with a resistor as mentioned above but What ROM should I use now?? also is there anywhere I can buy a cable with resistor in it or do i have to do it myself?
Hello,
I have the TF300T (without the keyboard dock), and I want to get a USB port dongle. However I have two needs:
I want the USB port to provide enough power for a USB 2.5" hard disk. I suppose I can use a powered USB hub for this?
I would really like to be able charge the tablet when the USB dongle is on. Is this possible?
Thank you
Evan_ said:
Hello,
I have the TF300T (without the keyboard dock), and I want to get a USB port dongle. However I have two needs:
I want the USB port to provide enough power for a USB 2.5" hard disk. I suppose I can use a powered USB hub for this?
I would really like to be able charge the tablet when the USB dongle is on. Is this possible?
Thank you
Click to expand...
Click to collapse
If that USB HDD requires 2 USB (one data one power), then a powered hub is your best bet.
When the USB dongle is in, it takes the place of the charging port. You can either charge the tablet or use the dongle.
Considering to use a Huawei Mediapad X2 7.0 for my 2DIN car install, since the dimensions of the tablet are nearly identical to 2DIN,
Therefore I would like to know if the device supports USB OTG Host mode and charging the battery of the mediapad simultaneously using a certain Y cable?
Thanks, much appreciated if you can give it a try!
FrankZZ said:
Considering to use a Huawei Mediapad X2 7.0 for my 2DIN car install, since the dimensions of the tablet are nearly identical to 2DIN,
Therefore I would like to know if the device supports USB OTG Host mode and charging the battery of the mediapad simultaneously using a certain Y cable?
Thanks, much appreciated if you can give it a try!
Click to expand...
Click to collapse
Not sure about OTG Host cum charging combination because my understanding if you use OTG Host mode very likely you plug in a USB OTG thumb drive meaning you cannot charge at the same time.
However connecting the X2 micro USB port via standard USB cable to my laptop, I noticed I could use it as an USB device and it charges at the same time albeit not as as fast as a dedicated charging.
kpcheang2 said:
Not sure about OTG Host cum charging combination because my understanding if you use OTG Host mode very likely you plug in a USB OTG thumb drive meaning you cannot charge at the same time.
However connecting the X2 micro USB port via standard USB cable to my laptop, I noticed I could use it as an USB device and it charges at the same time albeit not as as fast as a dedicated charging.
Click to expand...
Click to collapse
Yes, but not OTG.
I can confirm that, on my side, using an OTG hub with a external power plug, no way to have the device charged by external power when in OTG mode.
It is OTG or Normal charge and functions via USB.
Seems Logical because the Phone is supposed to provide the power to its USB accessories in OTG. Just my HUB has a switch that provide power to those accessories instead of the phone Itself. May-I add that switching this power button on the HUB does not function until you had unplugged & replugged the Hub in the phone after switching between the two modes. I'm afraid of the survival of the Micro USB plug of my phone, on the long run, with all those plugin, unplugin actions !!!
It's possible but with anothere Device the Nexus 7 (2012/2013) with Timurs Kernel. What's the difference of this kernel to the normal kernel, so OTG with charging is working for this device,too.
hi, i would like to use my xzp for octoprint until raspberrys are available again. The OTG function works but I can't charge and use otg at the same time with a Y-cable (aca mode?). I tested the stock and [ROM][13][OFFICIAL] NusantaraProject 5.2 (Toba) [14/11/2022]. Anyone an idea?
Well in theory it should be possible, with a adapter ("double dongle"), that has USB C to USB A to USB A
Like this one (link to amazon) (here's the link in case you can't click it:
https://www.amazon.com/-/de/dp/B07T...ix=usb+c+to+dual+usb+a+adapter,aps,187&sr=8-3 )
You could also search for something like this: usb c to dual usb a adapter
And you should get a few results.
I had one for my samsung (micro usb) and this kind of (double) dongle (adapter) worked.