Hello
Just bought a OP8T KB2005 version
I made the mistake to run all updates until reaching OOS 12
I got back using MSM to version 11.0.7.9 using this page https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4180837/
It seems to work as expected, but I wanted to know if there a way to push an update to the latest OOS 11 release
Found on this thread https://forum.xda-developers.com/t/oneplus-8t-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4193183/
this downgrade zip with version 11.0.11.11 but I don't know hoz to flash it.
Using fastboot ? It seems less secure than using MSM.
Thanks !
kemkem42 said:
Hello
Just bought a OP8T KB2005 version
I made the mistake to run all updates until reaching OOS 12
I got back using MSM to version 11.0.7.9 using this page https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4180837/
It seems to work as expected, but I wanted to know if there a way to push an update to the latest OOS 11 release
Found on this thread https://forum.xda-developers.com/t/oneplus-8t-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4193183/
this downgrade zip with version 11.0.11.11 but I don't know hoz to flash it.
Using fastboot ? It seems less secure than using MSM.
Thanks !
Click to expand...
Click to collapse
If you are on OOS 11.0.7.9 just flash latest flashable zip via local update in settings and you'll be on the latest OOS11 11.0.13.13.
Thanks.
Smoothly ran the update through local update.
Works like a charm!
Related
I have an oneplus 6 with official OSS 5.1.5 and TWRP installed. But after OTA update my phone to OSS 5.1.6, i cannot boot to TWRP anymore. Is TWRP gone after OTA update? My OEM unlocking still unlocked.
Have u not read anything in these forums, tutorials or anything?
There are like 50 threads on how to upgrade and about the new partitions for op6, it is even clear when u installed twrp too
dRakeNNNN said:
I have an oneplus 6 with official OSS 5.1.5 and TWRP installed. But after OTA update my phone to OSS 5.1.6, i cannot boot to TWRP anymore. Is TWRP gone after OTA update? My OEM unlocking still unlocked.
Click to expand...
Click to collapse
Hi, just to clarify when you install an OTA on the oneplus 6 it uses the new partitioning system which is different so to remedy the situation just try reflashing TWRP enchilada installer using fastboot.
cschmid44 said:
Hi, just to clarify when you install an OTA on the oneplus 6 it uses the new partitioning system which is different so to remedy the situation just try reflashing TWRP enchilada installer using fastboot.
Click to expand...
Click to collapse
Previously, i've installed Beta(unofficial) version of TWRP, now i want to re-install TWRP with Official version , do i need to remove or do something firstly?
To fix it just download the official TWRP for oneplus 6 from the official team win recovery project page and then you put that on your phone, and flash using your currently installed TWRP then after that make sure you also install the root package as installing the new version of TWRP will modify the new boot image, Also a good time to mention that it will install in both slots (Seamless update slots) Treble slots if you will just to be aware.
cschmid44 said:
To fix it just download the official TWRP for oneplus 6 from the official team win recovery project page and then you put that on your phone, and flash using your currently installed TWRP then after that make sure you also install the root package as installing the new version of TWRP will modify the new boot image, Also a good time to mention that it will install in both slots (Seamless update slots) Treble slots if you will just to be aware.
Click to expand...
Click to collapse
Thank you for your reply, but my problem is i cannot boot into TWRP after OTA upgrade my OSS from 5.1.5 to 5.1.6
dRakeNNNN said:
Thank you for your reply, but my problem is i cannot boot into TWRP after OTA upgrade my OSS from 5.1.5 to 5.1.6
Click to expand...
Click to collapse
Just follow one of the many upgrade guides. Skip the part about upgrading to 5.1.6 but for the rest follow the steps exactly. No need to explain all this in yet another thread imo. You'll need a pc though.
that's would be great if twrp can be flashed and stays there without wiping as well as root.
Pleasssseeeeee read before creating a new thread
dRakeNNNN said:
I have an oneplus 6 with official OSS 5.1.5 and TWRP installed. But after OTA update my phone to OSS 5.1.6, i cannot boot to TWRP anymore. Is TWRP gone after OTA update? My OEM unlocking still unlocked.
Click to expand...
Click to collapse
Wait!
Don't install 5.1.6 ROM because OP has retired it. The last version availabe on OP site is the 5.1.5.
MuttleyMB said:
Wait!
Don't install 5.1.6 ROM because OP has retired it. The last version availabe on OP site is the 5.1.5.
Click to expand...
Click to collapse
I'm using 5.1.6, so far so good. I don't have any issue on 5.1.6. ?
Sent from my OnePlus6 using XDA Labs
dRakeNNNN said:
Thank you for your reply, but my problem is i cannot boot into TWRP after OTA upgrade my OSS from 5.1.5 to 5.1.6
Click to expand...
Click to collapse
You can't boot into twrp because it's not there anymore. The OTA created a completely stock version of the OS that you're now booted on. You need to reinstall twrp and magisk according to the posted guides. This is going to be the case with all OTAs. The stock updater looks for root, and when it's there, it installs a complete OS, not an incremental update.
Hello I want to install LineageOS stable which is not available rn for Android10 so I need to downgrade to Oreo. How can I do this so I don't break my phone ?
I have a BA firmware, thx for help
I would Download the MSM Tool with an old Version of OOS 9.xx
unrated87 said:
I would Download the MSM Tool with an old Version of OOS 9.xx
Click to expand...
Click to collapse
What about adb sideload ? I'm on linux, it'll take long to do that
I've got my op7 and wish I could have the full zip for 10.3.0 GM57AA, does anyone here have it?
Also, do you see any advantage on changing from AA to BA?
PS: I live in Brazil
sekk said:
I've got my op7 and wish I could have the full zip for 10.3.0 GM57AA, does anyone here have it?
Also, do you see any advantage on changing from AA to BA?
PS: I live in Brazil
Click to expand...
Click to collapse
Go to playstore & download Oxygen Updater (is unofficial app but works very well)
open it,go settings - Advanced mode = ON / Update method = Full update
go back & download 10.3.0 if you want (2072mb)
__No...stay in GM57AA (global) if you live in brazil...
GM57BA = EU OxygenOS...
[for Fastboot Roms read here : https://forum.xda-developers.com/oneplus-7/how-to/rom-stock-fastboot-roms-oneplus-7-t3937478 ]
Repository thread OOS : https://forum.xda-developers.com/oneplus-7/how-to/oneplus-7-repo-oxygen-os-builds-t3937152 ]
daitalos said:
Go to playstore & download Oxygen Updater (is unofficial app but works very well)
open it,go settings - Advanced mode = ON / Update method = Full update
go back & download 10.3.0 if you want (2072mb)
__No...stay in GM57AA (global) if you live in brazil...
GM57BA = EU OxygenOS...
[for Fastboot Roms read here : https://forum.xda-developers.com/oneplus-7/how-to/rom-stock-fastboot-roms-oneplus-7-t3937478 ]
Repository thread OOS : https://forum.xda-developers.com/oneplus-7/how-to/oneplus-7-repo-oxygen-os-builds-t3937152 ]
Click to expand...
Click to collapse
The fastboot rom idk if it's updated, the oxygen os repo is not, it stopped on 10.0.2
Also, I can get the 10.3.0 file from Oxygen updater, or just directly update the smartphone? Is there any difference between 10.0.3 and 10.3.0? because on fastboot thread, mauronofrio has only made the images for 10.0.3
sekk said:
The fastboot rom idk if it's updated, the oxygen os repo is not, it stopped on 10.0.2
Also, I can get the 10.3.0 file from Oxygen updater, or just directly update the smartphone? Is there any difference between 10.0.3 and 10.3.0? because on fastboot thread, mauronofrio has only made the images for 10.0.3
Click to expand...
Click to collapse
First,take the 10.3.0 zip( full update )from oxygen updater as I told you. update your device via Local Update & Reboot device...
open again oxygen updater app, go settings - advanced mode = disabled / update method = Incremental update, go back & download the latest 10.3.1 update & install it again via Local update...
of course 10.0.3 & 10.3.0 is different builds...10.0.3 is older...The latest oos is 10.3.1
https://postimg.cc/gallery/36bbalage/
no needed fastboot rom etc....I hope your device is STOCK!
For any help etc here : https://forum.xda-developers.com/oneplus-7/help/help-thread-question-noob-friendly-t3954564
daitalos said:
First,take the 10.3.0 zip( full update )from oxygen updater as I told you. update your device via Local Update & Reboot device...
open again oxygen updater app, go settings - advanced mode = disabled / update method = Incremental update, go back & download the latest 10.3.1 update & install it again via Local update...
of course 10.0.3 & 10.3.0 is different builds...10.0.3 is older...The latest oos is 10.3.1
https://postimg.cc/gallery/36bbalage/
no needed fastboot rom etc....I hope your device is STOCK!
For any help etc here : https://forum.xda-developers.com/oneplus-7/help/help-thread-question-noob-friendly-t3954564
Click to expand...
Click to collapse
some said 10.3.0 and 10.0.3 are the same, but 3.0 for global and 0.3 for europe, but I don't who to trust at all...
also, I often use magisk, and I really DON'T LIKE to update system while rooted, so I prefer going for flashing the whole stock rom, update through OTA, and then, just arter these steps, install twrp and magisk... what do you recommend as a step-by-step to do so? remember, I don't want to flash stock while rooted
sekk said:
some said 10.3.0 and 10.0.3 are the same, but 3.0 for global and 0.3 for europe, but I don't who to trust at all...
also, I often use magisk, and I really DON'T LIKE to update system while rooted, so I prefer going for flashing the whole stock rom, update through OTA, and then, just arter these steps, install twrp and magisk... what do you recommend as a step-by-step to do so? remember, I don't want to flash stock while rooted
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-7/how-to/guide-unlock-bootloader-flash-twrp-root-t3954559
no build are the same....otherwise, there would be no updates(for Brazil follow GM57AA (global)- yes, GM57BA is Europe version OOS)
I told you..for any help,question,etc,just read carefully in OP - Specific Threads and Guides for Oneplus 7....all, step by step are described
You can post any question there and you'll receive help...
* https://forum.xda-developers.com/oneplus-7/help/help-thread-question-noob-friendly-t3954564
I followed my usual guide to upgrade...
https://forum.xda-developers.com/mi-a2-lite/how-to/10-0-4-0-to-10-0-7-0-ota-keeping-magisk-t3916863/
The May update is 11.0.5.0. I have a patched boot with Magisk 20.4
https://yasmar.net/xda/patched_boot_11.0.5.0_204.img.gz
And the vanilla boot
https://yasmar.net/xda/vanilla_boot_11.0.5.0.img.gz
Did you update from 9.0? or from previous 10.0 ROM?
smicas said:
Did you update from 9.0? or from previous 10.0 ROM?
Click to expand...
Click to collapse
I went from Pie 10.0.20.0 to Q 11.0.4.0 to 11.0.5.0.
I wasn't offered 11.0.2.0.
a1291762 said:
I went from Pie 10.0.20.0 to Q 11.0.4.0 to 11.0.5.0.
I wasn't offered 11.0.2.0.
Click to expand...
Click to collapse
Thanks,
And from 10.0.2.0 to 11.0.4.0 - did you also update the same way, or did you clean flash from fastboot?
smicas said:
And from 10.0.2.0 to 11.0.4.0 - did you also update the same way, or did you clean flash from fastboot?
Click to expand...
Click to collapse
I've been using the same process for every OTA since 10.0.4.0.
Only a few updates caused issues.
10.0.9.0 needed a newer TWRP.
Magisk 20 broke TWRP.
When I did the android 10 upgrade I had an issue with some Magisk modules that I had not upgraded. It would have been fine if I'd upgraded them first. I disabled them to boot and then installed the upgraded modules.
Does anyone have the boot img from version 11.0.10.0?
abracadabra02099 said:
Does anyone have the boot img from version 11.0.10.0?
Click to expand...
Click to collapse
There is no such version for Mi A2 Lite.
11.0.5.0 is the newest release (Android 10 with May security patches).
Hi @a1291762,
I'd like to know if
. it is possible to downgrade from 11.0.5 to latest Android 9
. it is possible to use a full working Gcam on 11.0.5 and how to install it.
Thank you!
I'm currently on v. 10.0.18 (I stopped the latest update for Pie) and I have a CSOT screen.
DekiS3 said:
Hi @a1291762,
I'd like to know if
. it is possible to downgrade from 11.0.5 to latest Android 9
. it is possible to use a full working Gcam on 11.0.5 and how to install it.
Thank you!
I'm currently on v. 10.0.18 (I stopped the latest update for Pie) and I have a CSOT screen.
Click to expand...
Click to collapse
It was only the first Android 10 (11.0.2.0) that had issues with screens. The 2 followups (11.0.4.0 and 11.0.5.0) work on all phones.
In theory, it is possible to downgrade back to 10.0.18.0 using a fastboot image.
https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
To get to 10.0.20.0 you'll need to get the OTA zip and install that. I'm not sure how to do that, but this process seems like it should work: https://forum.xda-developers.com/mi-a2-lite/how-to/how-to-manual-update-v11-0-4-0-users-t4082815
It might be worth checking if people have done the downgrade successfully. For example, the Pie-Oreo downgrade caused modem issues.
There's heaps of threads where people discuss gcams, but I do not know what the state is because I use the stock camera app.
DekiS3 said:
...
Click to expand...
Click to collapse
Apparently there was a 10.0.20.0 fastboot, but it's not on the fastboot thread
I don't know where I got this URL from but 10.0.20.0 is http://bigota.d.miui.com/V10.0.20.0...0.PDLMIXM_20200327.0000.00_9.0_2baf524aaf.tgz
a1291762 said:
I followed my usual guide to upgrade...
https://forum.xda-developers.com/mi-a2-lite/how-to/10-0-4-0-to-10-0-7-0-ota-keeping-magisk-t3916863/
The May update is 11.0.5.0. I have a patched boot with Magisk 20.4
https://yasmar.net/xda/patched_boot_11.0.5.0_204.img.gz
And the vanilla boot
https://yasmar.net/xda/vanilla_boot_11.0.5.0.img.gz
Click to expand...
Click to collapse
First of all, i never had magisk on android 8-9 before,then i want to install it on android 10 , i'm quiet understand with the fastboot step, but i don't know if its ok to do it right on a10, i mean if i just boot with your android 10 patched_boot then install magisk, did i just rooted my phone ?
I just wanted to install GCam btw
Thank you.
Hi there, I bought a Oneplus 9 (12/256) directly from Oneplus Singapore. Everything is great except for the fact that I hoped to update the software to a newer version ( 11.2.7.7 / 11.2.6.6 ) to enjoy the bug fixes and improvements.
The phone came on 11.2.3.3.LE25AA
The default system update showed that it was the latest version.
Okay......then I learnt about Oxygen Updater and used it to update to 11.2.4.4.LE25AA
However, when I proceeded to update further to 11.2.5.5, the app was still showing me that the latest software is 11.2.4.4 (What??)
I then learnt that my phone was running on Global Firmware which was stuck on 11.2.4.4 and though the incremental update from 11.2.5.5 to 11.2.6.6 was available, without being able to update to 11.2.5.5, I was stuck on 11.2.4.4...........
Then I researched my model number and realised that LE2113 meant my Oneplus 9 (purchased directly from Oneplus) was the EU variant.....running the Global firmware......sigh......
So here I am now, seeking advice from you knowledgeable folks, how do I go about getting my phone to run on the EU firmware so that I can enjoy faster(?) updates.
Is it as simple as downloading the full zip of 11.2.6.6.LE25BA from Oxygen Updater and using Local Upgrade in the default System Update? Will this wipe my data?
Or will I have to root/flash or something complicated
Just flash the full BA zip.
_MartyMan_ said:
Just flash the full BA zip.
Click to expand...
Click to collapse
By flash, are you referring to the system updater in the settings app?
Slofh said:
By flash, are you referring to the system updater in the settings app?
Click to expand...
Click to collapse
Yes
Yeah I have the same problem
Waiting for 11.2.7.7 BA