How To Guide Manual OTA update (RMX3561 80W) - Realme GT Neo 3

Hi All
gt neo 3 recent release ota update (India version) RMX3561_11.A.13_0130_202207190048.1B.7c9487b8_all.zip
If you still not receive ota update notify, here is a simple tutorial to guide how manual ota update
1.First download the ota file RMX3561_A13.zip, and put it into your phone some folder.
2.If your update page "Local install" button is disable, please follow below step, else go to step 3
a. Disable your celluar and wifi
b .clear "Software update" data
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
c. And go to update page to check "Local Insatll" button is enable or not
3.press "Local Install" and choose the ota file
4. Wait, if success press the instsall button to restart the phone
5. end
==================IF your phone is rooted and you want to keep the root after ota update watch below=============================
when go to the step 4, when system unzip succes.
Don't press the install button
Go to magisk first
, and choose install to another slot.
When magisk install finish, don't restart the phone
Go back to update page and press install button.
Wait the phone restart

tamama9527 said:
Hi All
gt neo 3 recent release ota update (India version) RMX3561_11.A.13_0130_202207190048.1B.7c9487b8_all.zip
If you still not receive ota update notify, here is a simple tutorial to guide how manual ota update
1.First download the ota file RMX3561_A13.zip, and put it into your phone some folder.
2.If your update page "Local install" button is disable, please follow below step, else go to step 3
a. Disable your celluar and wifi
b .clear "Software update" dataView attachment 5675605
c. And go to update page to check "Local Insatll" button is enable or not
3.press "Local Install" and choose the ota file
4. Wait, if success press the instsall button to restart the phone
5. end
====================================================================================== ==============
cuando vaya al paso 4, cuando el sistema se descomprima correctamente.
No presiones el botón de instalar
Vaya primero a magisk View attachment 5675625y elija instalar en otra ranura.
Cuando finalice la instalación de magisk, no reinicie el teléfono
Regrese a la página de actualización y presione el botón de instalación.
Espere a que el teléfono se reinicie
Click to expand...
Click to collapse
amigo puedes extraer el boot.img del A13?

tamama9527 said:
Hi All
gt neo 3 recent release ota update (India version) RMX3561_11.A.13_0130_202207190048.1B.7c9487b8_all.zip
If you still not receive ota update notify, here is a simple tutorial to guide how manual ota update
1.First download the ota file RMX3561_A13.zip, and put it into your phone some folder.
2.If your update page "Local install" button is disable, please follow below step, else go to step 3
a. Disable your celluar and wifi
b .clear "Software update" dataView attachment 5675605
c. And go to update page to check "Local Insatll" button is enable or not
3.press "Local Install" and choose the ota file
4. Wait, if success press the instsall button to restart the phone
5. end
==================IF your phone is rooted and you want to keep the root after ota update watch below=============================
when go to the step 4, when system unzip succes.
Don't press the install button
Go to magisk firstView attachment 5675625, and choose install to another slot.
When magisk install finish, don't restart the phone
Go back to update page and press install button.
Wait the phone restart
Click to expand...
Click to collapse
Hello friend, I've just executed your tutorial for move from Chinesse Firmware to Indian Firmware.
I haven't relocked my bootloader yet. After update using this tutorial: Should I try to relock bootloader?

ErnestoSV said:
Hello friend, I've just executed your tutorial for move from Chinesse Firmware to Indian Firmware.
I haven't relocked my bootloader yet. After update using this tutorial: Should I try to relock bootloader?
Click to expand...
Click to collapse
Answer is No and never relock your bootloader.
Only one way you can relock bootloader is you flash back to china version and format all user data.

Thanks for your advice friend. I will keep updating the phone without relock. By the way nice job.

tamama9527 said:
Hi All
gt neo 3 recent release ota update (India version) RMX3561_11.A.13_0130_202207190048.1B.7c9487b8_all.zip
If you still not receive ota update notify, here is a simple tutorial to guide how manual ota update
1.First download the ota file RMX3561_A13.zip, and put it into your phone some folder.
2.If your update page "Local install" button is disable, please follow below step, else go to step 3
a. Disable your celluar and wifi
b .clear "Software update" dataView attachment 5675605
c. And go to update page to check "Local Insatll" button is enable or not
3.press "Local Install" and choose the ota file
4. Wait, if success press the instsall button to restart the phone
5. end
====================================================================================== ==============
cuando vaya al paso 4, cuando el sistema se descomprima correctamente.
No presiones el botón de instalar
Vaya primero a magisk View attachment 5675625y elija instalar en otra ranura.
Cuando finalice la instalación de magisk, no reinicie el teléfono
Regrese a la página de actualización y presione el botón de instalación.
Espere a que el teléfono se rfriend can you extract the boot.img of the A13? I can't extract it from the OTA you uploaded
Click to expand...
Click to collapse
tamama9527 said:
Hi All
gt neo 3 recent release ota update (India version) RMX3561_11.A.13_0130_202207190048.1B.7c9487b8_all.zip
If you still not receive ota update notify, here is a simple tutorial to guide how manual ota update
1.First download the ota file RMX3561_A13.zip, and put it into your phone some folder.
2.If your update page "Local install" button is disable, please follow below step, else go to step 3
a. Disable your celluar and wifi
b .clear "Software update" dataView attachment 5675605
c. And go to update page to check "Local Insatll" button is enable or not
3.press "Local Install" and choose the ota file
4. Wait, if success press the instsall button to restart the phone
5. end
==================IF your phone is rooted and you want to keep the root after ota update watch below=============================
when go to the step 4, when system unzip succes.
Don't press the install button
Go to magisk firstView attachment 5675625, and choose install to another slot.
When magisk install finish, don't restart the phone
Go back to update page and press install button.
Wait the phone resfriend can you extract the boot.img of the A13? I can't extract it from the OTA you uploaded
Click to expand...
Click to collapse

friend can you extract the boot.img of the A13? I can't extract it from the OTA you uploaded :c

tamama9527 said:
Hi All
gt neo 3 recent release ota update (India version) RMX3561_11.A.13_0130_202207190048.1B.7c9487b8_all.zip
If you still not receive ota update notify, here is a simple tutorial to guide how manual ota update
1.First download the ota file RMX3561_A13.zip, and put it into your phone some folder.
2.If your update page "Local install" button is disable, please follow below step, else go to step 3
a. Disable your celluar and wifi
b .clear "Software update" dataView attachment 5675605
c. And go to update page to check "Local Insatll" button is enable or not
3.press "Local Install" and choose the ota file
4. Wait, if success press the instsall button to restart the phone
5. end
==================IF your phone is rooted and you want to keep the root after ota update watch below=============================
when go to the step 4, when system unzip succes.
Don't press the install button
Go to magisk firstView attachment 5675625, and choose install to another slot.
When magisk install finish, don't restart the phone
Go back to update page and press install button.
Wait the phone restart
Click to expand...
Click to collapse
Hello Man, dont appear local instalation in This metod

felipecps said:
Hello Man, dont appear local instalation in This metod
Click to expand...
Click to collapse
you can now extract the boot.img and root, thanks

Hello, please export the new update RMX3561_11_A.15, it is very necessary, the update does not come to the phone.

help

I have mistakenly updated to version RMX3561_11_C.12 without applying magisk, does anyone know the URL to the .zip file so I can patch the rom manually?
e.g.
https://rms01.realme.net/SW/realme%20service/realme%20GT%20NEO3%2080W/RMX3561XXXXXXXXXXXXXXXX.zip

there you go:
https://4pda.to/pages/go/?u=https%3A%2F%2Fgauss-componentotacostmanual-in.allawnofs.com%2Fremove-44f592c386c367cad229534bfbf8b2af%2Fcomponent-ota%2F22%2F11%2F10%2F25fefcdd93314e6ebcbca8a2c09e54cc.zip&e=118733566
attached the files too

I have mistakenly upgraded to version RMX3561_11_C.16 without applying magisk, does anyone know the URL of the .zip file so I can patch the rom manually?

Related

[How-To] Restore Lost IMEI [Qualcoom Chipset]

D I S C L A I M E R​
READ BEFORE GO ANY FURTHER
Change IMEI number is illegal and i won't support that
This should be used only IF somehow you mess with your phone in order to loose IMEI number
This is a Guide "How-To" restore your IMEI number for Lenovo K910. This should work on any Qualcoom chipset though with minor changes.
Make sure your phone had at least 60% battery or more.
I am not responsible for any damage caused on your phone. Everything will be your responsibility.
Important Note: If any moderator and/or administrator felt this thread may be illegal feel free to close it!
Tools Needed:
Phone;
USB Cable;
QPST Application v2.7.323 (must be this version);
Patience;
Caution!!!
Step-by-Step Guide:
Install QPST application from above link;
Reboot yout PC;
Find your phone IMEI number on your phone box, battery, under battery, whatever;
Turn off your phone;
Open "Device Manager" on your PC;
Hold "Volume -" button and connect your phone to your PC through USB cable (this button suquence is for Lenovo K910 only);
Release "Volume -" button when Lenovo logo appear;
By this time your phone should enter on "Factory Mode" and your "Device Manager" should be able to see the following COM port (port number may difeer);
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Remember "HS-USB Diagnostic" COM number;
Open QPSTConfig as administrator(this should be on your installation path i.e C:\Program Files (x86)\QPST\bin);
Go to "Ports" tab and click "Add New Port";
On the new window uncheck "Show serial and USB/QC Diagnostic port only"
On "Port:" put COM number seen on "Device Manager" earlier;
On "Port Label:" you can put anything;
Click "OK"
By this time you should get something like: (don't bother with Phone code numbers. this should be different);
Now go to "Active Phones" tab;
Click on your phone from the list and go to "Start Clients";
On RF NV Item manager, go to "Settings > Comport";
Select your COM port and click "OK";
Click "File" > "Read Supported NV RF";
From the list, go to 550 number and you will get 9 blank lines;
Check "Hex" box;
BE CAREFULL NOW THIS IS THE MOST IMPORTANT THING!!!
You will see 9 text boxes and where you should put your IMEI number. You should do this EXACTLY as described or else...
You should put your IMEI backwards.
Let's take this number as an example: 954091051099226. The boxes should be filled like:
Code:
8 (This must go in the first box ALLWAYS!)
9a (The "[B]a[/B]" represents the fact that the last pair only consists of 1 number)
45
90
01 (this can be written as 1 as well)
15
90
29
62
or
Once you enter in the data, press Write Changed NV on "File"
Reboot your phone
Confirm your IMEI number by typing *#*#06#
Hope this will help you to recover your lost IMEI number:good:
Good luck and be very cautious!!!
Cheers
Crowds
[Reserved]
consulta
Crowds said:
[Reserved]
Click to expand...
Click to collapse
serviria para k910e dual sim
solo me reconoce sim2 en eg
la sim1 en 3g no la lee ni esta en pantalla
despues de brikearlo me reconoce solo una sim de 2g
como puedo poner la otra para que
la reconozca con este programa
en la caja solo viene un imei pero tenia dos tarjetas cuandol lo compre a china
venia en chino y al ponerle tu rom vibe 2 se me bloqueo
lo he recuperado con qpst pero solo pone una sim
le he instalado la version china de china telecom pero solo sale un imei
imei 1 : 0
imei 2 : 88273893900108 15 numeros que no son estos claro
*#06#
solucion por favor
maslenovo dice que puede cambiarlo pero es muy caro 75€
creo yo
muchas gracias.
Hi , do you know if this tutorial works for both dual sim and single sim variants ?
I too have lost the Imei on SIM 1 after changing the display.
Thanks
My K910 has been flashed to CM12. Will this method still work? It seems the key sequence to enter "factory mode" does not work. By the way, is the "factory mode" the same as "engineering mode?" The images are down so I cannot be sure.
Thanks.
mine was fixed and IMEI was back after factory reset , I'm on 4.2.2 1407 ROW rom , the best I know
can i put ant randomly generated imei no i lost my imei numbers cant find it anywhere its obi sf1 android phone
Facing read only error in final step of write change imei values
I lost my imei I have a lenovo phab pb1 750 m . it was on MM and I flashed stock ROM of lollipop version using lenovo downloaded tool.
My phone only shows com port in edl mode and not in fastboot or in adb ..but
This is how I finally got my device on active phones tab ..
Adb shell
Su
......diag...command...
After which connecting through com port 4
And my phone was listed under active phone tab and I proceed as you mentioned.
After reading my imei was blank and then finally writing my imei no. In boxes I cleck write changed values option under files tab. I get an error like
Unable to write 'NV_UE_IMEI_I' to the phone. (Parameter is write-protected and thus read only)
Please any help would or suggestions I need very much my phone would not connect to network wifi and other connections are working properly. Some how in this thread below they discussed the same problem and appear to solve it but I can't understand for my phone.
Thread link -
https://forum.xda-developers.com/showthread.php?t=1960918&page=1
Thank you hope you reply for very old post
I have a problem with port
my phone doesn't have COM Port in Windows 10 on my laptop
can I just handle it with another application?
---------- Post added at 09:58 PM ---------- Previous post was at 09:57 PM ----------
I have a problem with port
my phone doesn't have COM Port in Windows 10 on my laptop
can I just handle it with another application?
I found a way, you need to have "EFS PROFESSIONAL" its free!
1. flash combination files.
2. in IMEI option type +#0808# select DM+MODEM+ADB then leave the modem option showing next, then restart phone.
3. open EFS Professional, select Qualcom option, then your phone should show on com ports, then tap connect, Secure OPs, tap send password and the imei should show, right there you can change it or restore it from the original. tap write to phone. disconect and then turn phone off.
4. check imei +#06#
let me know if you need help
Thanks for your comment.
Am using Asus Pegasus X003.
Just flashed but somehow lost IMIE.
Do we need to root this device?
Can u pls explain step Flash Combination files?
Is there a way to do with for Mediatek devices? Specifically Redmi Note 8 Pro?
Use Engineering Mode
JuanM2020 said:
Is there a way to do with for Mediatek devices? Specifically Redmi Note 8 Pro?
Click to expand...
Click to collapse
You Can use Engineering mode on MediaTek devices to recover/change IMEI.
The method can be easily found on google/youtube.

How to Root LG G3 Stylus

How to Root LG G3 Stylus
by:
Apriansyah Bintang​
Ok My Brothers, this is my first post on XDA Developer and I am not an expert in android technology, but I want to share with you how to root the LG G3 Stylus.
Caution:
-------------------------------
1. I'm not responsible for any damage incurred.
2. This Method only for LG G3 Stylus
3. Not recommended if you have updated the firmware and / or applications On The Air (OTA).
4. Do not hesitate to ask if having difficulty.
5. Good Luck.
6. Thanks for Hard13 from kaskus indonesia for your help.
7. Thanks for @thecubed for your tool at :http://forum.xda-developers.com/lg-g3/development/root-root-lg-g3-easily-purpledrake-lite-t2821000
8. Sorry for my bad english.
9. Your Thumb Please..
Okay, let's prepare the files to the root:
1. Go to settings> general> about phone> general> Software information> Software> click 7 times the build number / numbers manufacture. It will appear in the settings menu "developer option."
2. Go to settings> general> developer option> enable "usb debbuging."
3. Download LG G3 Stylus drivers here > install in xp, win 7 or win 8> connect your device with usb cable to the computer and let Windows install the driver perfectly.
4. Dowload Tool here > extract this tool it name "PurpleDrakeLite" > click "purpledrake_windows.bat."
5. And now prepare the usb cable that was attached to the computer first and plug it into your devices (Make sure your devices in MTP mode).
6. Then will appear the notification that pop up from your devices, it asking: "are you will always accept to receive usb debbuging from your computer." but leave this pop up alone and do not tap anything until you click "root tool" in your computer it name: “purpledrake_windows.bat.” then there will be a 'sighting' like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Tap enter on your laptop in “purpledrake_windows.bat" application.
8. Tap OK in pop up that has appeared in your devices (number 6).
9. Than the application in your laptop will show like this.
10. Tap "enter" and your device will reboot and going to the "download mode" or what ever it name, look like this:
11. And the application in your laptop will show like this:
12. Click "enter" on your computer to install the application permalink innate superuser "purpledrake_windows.bat," and it looks like this:
13. After completion of the above process your device will restart once, TADAAAAA ... it already rooted.
14. And Install SuperSU form PlayStore.
15. Finish and thank you for reading my post (Apriansyah Bintang).
16. If you do not understand yet please see the tutorial at yutube, here : https://www.youtube.com/watch?v=hAD8bcNWCD4.
-------------------------------------------------------------------------------------------------------------------------------------
ANOTHER WAY ROOT LG G3 STYLUS
by : Apriansyah Bintang
Okay with it . We will root the LG G3 Stylus another way :
A. PREPARATION
1. Go to setting > general > about phone > general > Software information > tap 7 times the build number. Then the menu "developer option" will appear in the settings.
2. Go to setting > general > about phone > general > developer option > enable "USB debugging."
B. STEPS ROOT
1. Download Vroot through your laptop, here
2. After the program vroot is downloaded please execute of the laptop (phone already connected with a USB cable) and press "connecet device."
3. Then there will be a pop-up confirmation notice "USB debugging" in your phone then leave it alone.
4. Vroot force us to install some Chinese language applications, just press "OK" it can be removed anyway.
5. After installing the Chinese language application then please press the button ROOT, it is gren button in the bottom corner.
6. After installing a root system then your phone will reboot, wait until vroot finish loading and installing a Root System in our phone.
7. Then go playstore and install SuperSU > intsall > open SuperSU > update binaries > reboot . NOTE : When the update binaries in SuperSU will pop up comes across chinese speaking, this default application vroot, please click "right button" it mean: "yes.
8. Reboot. Done .
-------------------------------------------------------------------------------------------------------------------------------------
ROOT LG G3 Stylus without Computer/Laptop
by:
Apriansyah Bintang
There is the latest way to root LG G3 Stylus without a PC but not recommended because after I upload it to mediafire the file infected with a virus, which is a shortage Kingroot always considered a virus by all scanweb and antivirus in the world.
But if you want to, please download here, or here.
Just press the green button and then it would root your LG G3 Stylus. And do not install SuperSU, because SuperSU is already included in Kingroot Application.
Thanks for reading my article.
May I ask where/how did you find this info?
I plan to buy this phone soon if it can be rooted.
t88 said:
May I ask where/how did you find this info?
I plan to buy this phone soon if it can be rooted.
Click to expand...
Click to collapse
from my friend hard13 @Kaskus Indonesia..
boot.img
you can backup the boot.img for me ? Thank you very much
I need lg g3 stylus boot.img
Thanks for the tutorial...
But where the official thread of G3 Stylus on yhis room..
seethegoeh said:
Thanks for the tutorial...
But where the official thread of G3 Stylus on yhis room..
Click to expand...
Click to collapse
I think there is no Official Thread yet.
qingfengxiaocao said:
you can backup the boot.img for me ? Thank you very much
I need lg g3 stylus boot.img
Click to expand...
Click to collapse
Over here bro...:
http://forum.xda-developers.com/android/general/how-to-flashing-lg-g3-stylus-t2940895
download boot image on number 3. (LG Stock Firmware Indonesian.)
I know that
but I mean I need boot.img rather than D69010c_00.KDZ
if your lg g3 stylus is root ,you can use android adb to backup your lg g3 stylus's boot.img and send for me .
Because I can't unpack D69010c_00.KDZ to look for boot.img
Thank you very much
apriansyahbintang said:
I think there is no Official Thread yet.
Click to expand...
Click to collapse
So sad.. :crying:
I think this phone not only sale in indonesian markets.
And no develop team for this phone..
No It not true, this phone still new. Just wait for Official LG G3 Stylus Forum.
boot.img LG G3 Stylus LG-D693n
https://mega.co.nz/#!OI0hWZ4D!FpicAx9uuAT8bNgo68mSePo2cUYxL8zxtbTb6z9xPFY
nice info bro...
im just using VROOT and it works..
do you have LG G3 Stylus LG d690 boot.img?
marcozm said:
boot.img LG G3 Stylus LG-D693n
Click to expand...
Click to collapse
do you have LG G3 Stylus LG d690 boot.img?
cygnus39 said:
nice info bro...
im just using VROOT and it works..
Click to expand...
Click to collapse
Yes... this is the link of vroot...
Is there any way to get a recovery on it?
Terimakasih, Sukses Selalu, dan Terus Berbagi
Mas Bintang Maturnuwun ya
Infone sangat simple dan mudah dipahami bagi penginyongan sing ora jegos bahasa inggris..
Btewee... di info dong selanjutnya enaknya ngapain nih kita sama LG g3 stylus yang sudah di root....
terimakasih.. keep sharing yo kang '''
This method seems not to be working since the last OTA update (v10). I was able to root using Vroot, though.
Vroot is malware? this is what i read in some places
Takada Tapiono said:
Mas Bintang Maturnuwun ya
Infone sangat simple dan mudah dipahami bagi penginyongan sing ora jegos bahasa inggris..
Btewee... di info dong selanjutnya enaknya ngapain nih kita sama LG g3 stylus yang sudah di root....
terimakasih.. keep sharing yo kang '''
Click to expand...
Click to collapse
Gabung aja di facebooknya gan, ane adminnya, jangan lupa jempolnya dong:
https://www.facebook.com/groups/1560147754206280/
evertonjcorreia said:
This method seems not to be working since the last OTA update (v10). I was able to root using Vroot, though.
Click to expand...
Click to collapse
Nope it not true...

[ROM][4.4.2] REAL 1080P on CYX_809III V5_2 20141105 MK809III RTL8723BS

After trying numerous ROMs without success and always getting "boot loops", I finally found a way to activate REAL 1080P on my Android Mini PC!!
This is NOT scaled 720p! The display resolution of 1920x1080 was confirmed with the Hardware Info app from Google Play.
Model: CYX_809III V5_2 20141105 with RK3188 CPU and WiFi/BT chip RTL8723BS (2G RAM, 8G NAND)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Photo sources: [1] [2] and [3])
*** If you don't have this EXACT model, STOP reading here! ***
WARNING: Flashing a new ROM WILL ERASE EVERYTHING on your device! BACKUP ALL DATA including the internal SD card before proceeding!
You assume all the risks and I am NOT responsible if you lose data or "brick" your device!
Here's the long story of how I did it. DO NOT follow the steps! Just read them and scroll down to the next section.
--- Begin Long Story ---
1. First, I downloaded this ROM: MK809III,UH007B_8723bs_4.4_1080_20140924, which can be found at:
http://chinagadgetsreviews.blogspot.com/2014/11/download-android-kitkat-442-firmware.html
https://yadi.sk/d/oLLygFotdc6K3
https://mega.co.nz/#!Z10mgYhT!SdubLh6SJZ1OYsyrCR80G8kaowNLAhNMbX1bNeIrPBs
2. I flashed the ROM above using the "RKBatchTool V1.7" (see bottom of post for links). After flashing, it did NOT work and resulted in a boot loop. Next, using the following ROM backup tool, I made a dump of the "system.img" of the above ROM.
http://freaktab.com/forum/developme...our-RK-device-(ROM)-with-the-new-RK-2-1-tool=
3. I then flashed the ONLY "working" ROM for this Mini PC (but 720p!), cyxtech_rk31_809iii_8723bs_141216_4.4_8g1g, which can be found at:
http://forum.xda-developers.com/hardware-hacking/android-sticks/cx919-ii-firmware-t2972279
http://pan.baidu.com/s/1qW1A12W
https://mega.co.nz/#!JlFFnb7Q!LyFbSfdKp526zqSJHmuO9oKrP1romqKaInZc7ianO50
4. Using the ROM backup tool above, I made a dump of the "parameter.txt" file of this "working" ROM. Then I modified the parameter.txt to account for the larger system.img from Step 2, which I will flash in the next step. I then made a dump of all other partitions from this ROM, and packaged them in my new ROM below.
5. Finally, using AndroidTool V2.3 OR RKAndroidTool v1.37 (see link below), I flashed the system.img which I dumped in Step 2 (from the ROM in Step 1). Before flashing it I had to load the modified parameter.txt file from Step 4. Then I rebooted and Voila! I was able to switch to real 1080p in the settings.
--- End Long Story ---
For your convenience, I have created a new ROM. All partitions were extracted from the "working" ROM in Step 3, with the exception of "system.img" which is from the ROM in Step 1. In other words, this is a "hybrid" ROM made from (1) and (3)! As mentioned above, the "parameter.txt" was edited to account for the larger system.img.
When flashing this ROM in AndroidTool V2.3 OR RKAndroidTool v1.37 (see link below), first click on "EraseIDB" (低格) to remove all existing NAND contents (make sure you have backups!) Then select ALL of the following: Loader, Parameter, Misc, Kernel, Boot, Recovery, System. Put a checkmark in front of each one (including Parameter) and be sure to choose the actual file from the extracted archive by clicking on the rightmost column of each item. Clear other checkmarks, double check everything and when ready, click the "Run" (执行) button.
Your Android stick should auto-reboot right after the flashing is done. Therefore, it is recommended to connect the USB power cable (if you have a spare one) while flashing, and when finished, let the Android stick initialize for some minutes before unplugging it from power.
This ROM contains Android version 4.4.2 (KitKat). To activate 1080p, you MUST go to Settings -> Display -> Screen -> HDMI Mode and choose a 1080p resolution. SuperSU is installed BUT the system does not seem to be rooted. If you get a notification that the NAND Flash cannot be mounted, just click on it and you will be prompted to format it.
Again, if you do not have the EXACT device model mentioned in this post, STOP here and don't flash!
Download link for my new ROM (from Yandex Disk):
https://bit.ly/809iii-1080p-rom
(MD5 sum: 41d0149be7876516c0a614d9285fc999)
Alternative download mirrors:
https://bit.ly/809iii-1080p-rom-mirror1 (from Dropbox)
https://bit.ly/809iii-1080p-rom-mirror2 (from 4Shared)
The various tools for flashing the ROM, and related instructions can be found here:
http://radxa.com/Rock/flash_the_image
(To enter "loader mode", power off your android stick, then press and hold the Fn button on its side,
while connecting the usb cable from "OTG port" to your computer)
If you use this ROM please share your experience by replying to this thread!
Comments and feedback are welcome!
FYI ONLY - The following are NOT needed unless you need to recover from a "bricked" device:
How to enter MASKROM mode and flash using the RKBatchTool (requires full image of the original ROM or another "working" ROM):
http://freaktab.com/forum/tv-player.../11306-cx919-ii-j22-dont-work-after-the-flash
http://linux-rockchip.info/mw/index.php?title=Boot_Sequences#MASKROM_Mode
http://radxa.com/Rock/unbrick
**Update**
An issue with the new ROM was identified and fixed as of 7PM UTC on 05/18/2015. The updated ROM containing the fix had been uploaded. If you downloaded the ROM prior to the date/time above, please re-download it from the link in the first post and follow the instructions again.
All flashing instructions have been tested on my own device and confirmed working.
Thanks so much for posting this. I finally managed to un-brick my TV stick and get it working again, now with real 1080p!
I used RKAndroidTool v1.37, entered the offsets manually from parameters.txt according to your file and everything flashed successfully after hours of repeated attempts to flash various other ROMs. Originally I was trying to flash various Linux images unsuccessfully and I thought I bricked the device. Turns out I didn't. Thanks again!
boa noite , agradeço a este post .foi onde encontrei o que precisava . meu mini pc voltou a piscar novamente .
Porem esta desligando sozinho .
mesmo assim obrigado
Great Work
Thank you very much, just what I needed to resurrect my android tv, the rom is very smooth, fluid and faster than the original, great work.
I know this is an old thread, but i just got 2 of these tv sticks, they already run on 1080p but i was wondering if you know how can i enable screen rotation? i'm trying to use them to display on vertical screens. Thanks
Hello,
Try with this, https://forum.xda-developers.com/showthread.php?t=2331514
or an similar app .
Good luck.
baquerom said:
Hello,
Try with this, https://forum.xda-developers.com/showthread.php?t=2331514
or an similar app .
Good luck.
Click to expand...
Click to collapse
I will try it, thank you very much
I tried rotation apps, and it doesn't work. I think the sticks have the gyroscope disabled, do you know how i can enable it? i was trying to create a rom backup to edit the code but really don't know what i'm doing
mendesmendes said:
boa noite , agradeço a este post .foi onde encontrei o que precisava . meu mini pc voltou a piscar novamente .
Porem esta desligando sozinho .
mesmo assim obrigado
Click to expand...
Click to collapse
Amigo, o meu estava assim, ele esquentava muito e reiniciava, então adaptei uma ventoinha de 5v e 4x4cm que comprei no ebay, soldei direto na usb, nunca mais deu problema, ja tem mais de um ano, voltei nesse site, procurando alguma att... porque android 4.4 ta por fora, gosto do Mk809, mas não atualiza netflix, kodi e nem roda h265x ... o que me resta é comprar outro, foram 4 anos de bom uso.
Abraços e espero ter ajudado.

[TOOL] Google Camera without root/magisk (Enable Camera2Api, EIS)

IMPORTANT: SINCE MAY OTA UPDATE, DATA IS WIPED IN THE BOOTLOADER UNLOCKING PROCESS. TO USE THE TOOL YOU HAVE DOWNGRADE APRIL OR BEFORE, INSTALL THE CAMERA AND THEN UPDATE.
This is a tool to install Google Camera, enable camera2api and EIS without root.
Thanks to amazing dev flex1911 for the method: Link
NOTE: If you get stuck in twrp, select "Keep Read Only", not "Swipe to allow modifications".
English/Spanish program.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FAQ:
Installing GCam in this way the OTA are working? Camera2Api and EIS keeps enabled?
According to my test with December to January Oreo, yes and yes.
What can I do if my phone gets stuck in fastboot/twrp or the camera app crash?
Check if all security is turned off. Use the program as administrator.
Install Qualcomm drivers and/or mi pc suite.
If the phone keeps getting stuck in fastboot/twrp: Open device manager and check if there is any driver error:
Click on "update driver software", "browse my computer for driver software", "let me pick from..." and select one from the list.
triángulo amarillo indicando que no se reconoce correctamente el móvil. Si aparece, click derecho, actualizar controlador, buscar software de controlador en el equipo, elegir en una lista de controladores disponibles en el equipo y selecciona alguno de la lista.
Download: https://goo.gl/GZYtXW​
Video of a friend using the tool (it's in Spanish)
Other video (English)
Features:
- Install drivers: You can install 1.4.3 or 1.3 version of this fantastic tool: Link
- Enable HAL3, EIS and install GCam: Install "GoogleCamera-Pixel2Mod-Arnova8G2-V1" with portrait, zsl, front hdr+, ... and open a image with configuration instructions.
(You can delete it and install any GCam version but it's necessary use that button to enable camera2Api, EIS)
Disable HAL3, EIS
Instructions:
0) To avoid problems in storage mounting, disable pattern/password. When the process is finished you can enable pin/pattern again.
1) You have to enable developer options, OEM unlock and USB debugging before use the app:
2) Install adb/fastboot drivers (if you don't have it)
3) Enable HAL3, EIS and install GCam.
4) Configure the camera like the image openend in the tool.​
Click to expand...
Click to collapse
​
Manual Steps (If you don't want to use the tool):
https://forum.xda-developers.com/showpost.php?p=75541654&postcount=98
Google Camera updates:
You can simply uninstall Google Camera app and install any apk after enable Camera2Api and EIS.
https://www.celsoazevedo.com/files/android/google-camera/
​
I blocked my phone in fastboot.... hope at least i'll get it working as it was before, at least...
GolfMike7 said:
I blocked my phone in fastboot.... hope at least i'll get it working as it was before, at least...
Click to expand...
Click to collapse
The worst thing that could happen it's that doesn't work the Google Camera. As always, if there is any problem with adb/fastboot try the alternative drivers.
Im assuming OTA gonna work fine right? Like the other threads enabling camera 2 api. Very helpful for those who dont want root and still be able to use gcam. Nice!
Edit: ow yeah its in your post already.
How long is it supposed to take? It has been more than 10 minutes unlocking bootloader and nothing happens.
Edit: For those who got stuck on "Unlocking bootloader" while in Fastboot: Keep your device connected to the PC. Open device manager in Windows, you will find the Android Device with the warning symbol. Right click on it and select update driver. Then select Search for drivers in this PC. Then select choose from a list of drivers available. On the left side of the list search for Samsung and on the right side of the list choose Samsung ADB device and apply. Restart the device and the program on your PC and start the install process again.
t0per666 said:
Im assuming OTA gonna work fine right? Like the other threads enabling camera 2 api. Very helpful for those who dont want root and still be able to use gcam. Nice!
Edit: ow yeah its in your post already.
Click to expand...
Click to collapse
Before upload I tried the program flashing stock december Oreo, then I installed GCam with this and, finally, I updated to January Oreo and Camera2api is still enabled.
caolan said:
How long is it supposed to take? It has been more than 10 minutes unlocking bootloader and nothing happens.
Click to expand...
Click to collapse
If drivers are working well, 1-2 minutes.
Can someone please elaborate a bit more? I am unable to understand step 4.
Thanks in advance.
---------- Post added at 06:11 PM ---------- Previous post was at 06:09 PM ----------
Can we do this without unlocking bootloader?
Root is not needed but twrp is needed? At the end will twrp be uninstalled? Becsuse with twrp OTA will not work
arvind7955 said:
Can someone please elaborate a bit more? I am unable to understand step 4.
Thanks in advance.
---------- Post added at 06:11 PM ---------- Previous post was at 06:09 PM ----------
Can we do this without unlocking bootloader?
Click to expand...
Click to collapse
You have not to touch the phone (unless ask for fingerprint or pin in twrp). The "Install GCam" button boots in fastboot, unlock bootloader, lock bootloader, ... without do anything in the phone. When the process end, the tool opens a image with the configuration in the Google camera.
taurelio said:
Root is not needed but twrp is needed? At the end will twrp be uninstalled? Becsuse with twrp OTA will not work
Click to expand...
Click to collapse
Twrp is only booted, not installed.
AridaneAM said:
Twrp is only booted, not installed.
Click to expand...
Click to collapse
But im all stock firmware, no twrp installed. It means that i have to change the recovery , hence ora will not work. It means thar you allways have to chage the stock firmware...
Enviado do meu Mi A1 através do Tapatalk
(If you have problems try to disable pattern/password for mount the storage in twrp)
How?
Everything works smooth but because that password I can't enable camera2API, EIS. etc and I have FC in Arnova ofcourse.
taurelio said:
But im all stock firmware, no twrp installed. It means that i have to change the recovery , hence ora will not work. It means thar you allways have to chage the stock firmware...
Enviado do meu Mi A1 através do Tapatalk
Click to expand...
Click to collapse
When you use "Install GCam" the tool does all, unlock bootloader, boot twrp, lock bootloader.
macelaru said:
(If you have problems try to disable pattern/password for mount the storage in twrp)
How?
Everything works smooth but because that password I can't enable camera2API, EIS. etc and I have FC in Arnova ofcourse.
Click to expand...
Click to collapse
I edited that part, it can be confusing. I mean disable pattern/password in settings, not in twrp. Finally, without pin/pattern do "Install GCam".
macelaru said:
(If you have problems try to disable pattern/password for mount the storage in twrp)
How?
Everything works smooth but because that password I can't enable camera2API, EIS. etc and I have FC in Arnova ofcourse.
Click to expand...
Click to collapse
You have to disable your Pin code (and fingerprint) in android
AridaneAM said:
You have not to touch the phone (unless ask for fingerprint or pin in twrp). The "Install GCam" button boots in fastboot, unlock bootloader, lock bootloader, ... without do anything in the phone. When the process end, the tool opens a image with the configuration in the Google camera.
Click to expand...
Click to collapse
What to do after downloading Mi A1 GCam.zip file?
Do I have to connect my mobile with a pc/laptop?
Yep, I figured myself meantime.
Everything is fine here now.
Thanks guys.
Thanks man ! It works great :good:
Does this work with january 1 ota? Also, will it disable ota updates?
It worked. but... I had to start the program like 4 or 5 times because it would not go to the end (also i did nothing).... In the end seems ok.
First time it did not work because i ran the app from the archive. So first, unzipp the file and only after that run the app.
Thank you!

My Samsung Galaxy A30s Failed to install TWRP recovery and Shutdown suddenly.

Hi there I need a help, please.
I followed the step in here https://magiskapp.com/install-twrp-recovery-on-any-android/
After I use Odin to install twrp recovery, it was pass then I restarted my phone with appear logo Samsung screen with white font then green (pics below).
So, the phone cannot boot anymore.
Any suggestion how do I fix my phone please?
I used stock rom at this link https://www.sammobile.com/samsung/g...M-A307GN/XID/download/A307GNDXU4CUF2/1561309/
My device is Samsung A30s with Android 11.
How can I root my Android 11? and How do I fix it? I tried several days to look but I didn't found.
I thank you so much for the help and waiting for you guys
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try reflashing stock ROM, then reflash twrp WITH auto reboot in options of odin DISABLED
I tried several times to turn my phone to up again, with push volume button up + down with power button but only appear samsung logo and turn back off again and again. How can I restart back to Download mode so I can re-flash the stock rom again? Sorry I am newbie here.
Download and install Samsung's "Android USB driver" suitable to this phone, if not done yet.
Download Samsung USB Driver for Windows (Latest Driver)
Download the latest Samsung USB Driver to connect Samsung Smartphone and Tablets to the Windows Computer without installing Samsung Kies.
androidmtk.com
I try using cmd 'adb reboot recovery' the phone restart appear logo white Samsung and turn to green Samsung just like the above my pics (the same) then cannot boot in anymore. Where can I fix please ....
Hello there, I try the following command, '-fastboot reboot bootloader' then it appear my phone to Download mode. After that I start re-flash with Odin, success back to Samsung A30s Android 11 stock rom. But it started normally back to normal. How can I root Android 11 in the right way. I had failure many times when I root with Magisk 23 and TWRP. Does Anyone here to give me a hint, please???
After I struggled to root my Samsung SM-A307GN/DS Android 11. I found that I could bypass the admin root level successfully. Here are what I did and I follow my own steps below:
1). Unlocked the bootloader after I clicked 7 times to get Developer mode opened.
2). I downloaded the last Samsung firmware new update for Android 11 (I used Bitfrost apps)
3). Extracted the Zip file of stock ROM,
(I used command 'adb reboot fastboot' in download mode) my Odin worked to re-flash my phone.
4). Reboot again and enable USB debugging
5). I installed Magisk Canary
6). I extracted and took "boot.img.lz4" taken from file AP_A307GNDXU4CUJ2_CL22825772_QB45126107_REV00_user_low_ship_meta_OS11.tar.md5
7). Transfer the file "boot.img" to my external SD card on my phone.
8). I patched the "boot.img" with Magisk canary apps.
9). I rename the boot patch and re-pack it again with tar archieve
10. The "boot.tar" was written by Odin (in the field AP), reboot again
11. Wipe data and cache in recovery mode (delete everything to clean up.
12. Install the Magisk again and Root checker
13). It was nicely D.O.N.E !!!!!
Bro I'm facing the same problem... Have you solved it or not? If yes then please help me...
[email protected] said:
Hola, ¿Qué tal?, yo también he tenido ese problema, estuve investigando un poco pero casi no hay información sobre este problema al actualizar el TWRP, solo utilizaremos un programa para poder acceder de nuevo al "Modo descarga", Pasos a seguir:
1) Descargar Jurassic Universal Android Tool v5.0.2
https://www.mediafire.com/file/sppiuup6glh5e7p/Jurassic_Universal_Android_Tool_v5.0.2.zip/file
2) Conectamos nuestro A30s y el PC lo debe reconocer, si no lo hace entonces sigue estos pasos:
2.1) Mantén oprimido el Volumen – y El botón de encendido y luego conectas el cargador para que el celular trate de iniciar
2.2) Mientras se inicia presiona el Volumen + y El botón de encendido, ya que el celular en mi caso entraba en un Bootloop y con ello se trataba de iniciar el TWRP, y con ello este proceso se interrumpirá, después de ellos se apagará el A30s y nuestro PC lo reconocerá (IMPORTANTE QUE EL A30S SEA RECONOCIDO) – No olvidar que mientras presionas los botones el cargador debe estar conectado
3) Abrimos Jurassic Universal Android Tool y nos vamos al apartado de "SERVER", e iniciamos "START ADB SERVER"
4) Nos dirigimos a "FASTBOOT", seleccionamos Android
5) Hacemos click en "ENTER FASTBOOT" - Dejamos 5 segundos
6) Hacemos click "RECOVERY" Y dejamos que se reinicie
7) Hacemos click de nuevo en "ENTER FASTBOOT", esperamos 2 segundos y en la parte de abajo damos click en "OFF SU"
8) Y lo mismo con "EXIT FASTBOOT"
9) Nos vamos a "RECOVERY" Y dejamos que inicie hasta la mitad del tiempo que se tarda en reiniciarse le damos en OFF y rápidamente le damos en REBOOT
10) Y ya estaría iniciándose desde el "Modo descarga", solo queda entrar a Odin e instalar el sistema operativo de fabrica - https://www.sammobile.com/samsung/g...M-A307GN/XID/download/A307GNDXU4CUF2/1561309/
(SI NO TE FUNCIONO INTENTA JUGAR UN POCO CON LOS CONTROLES ESTE FUE LE PROCESO QUE A MI ME FUNCIONO ESPERO TE HAYA SERVIDO – ESTA HERRAMIENTA DE VERDAD FUNCIONA DALE UNA OPORTUNIDAD)
Click to expand...
Click to collapse
[email protected] said:
------------------------------------------------------------------------------------------------------------------------------
Hi, Howdy, I have had that problem too, I was doing some research but there is almost no information about this problem when updating TWRP, we will just use a program to be able to access the "Download Mode" again, Steps to follow:
1) Download Jurassic Universal Android Tool v5.0.2
https://www.mediafire.com/file/sppiuup6glh5e7p/Jurassic_Universal_Android_Tool_v5.0.2.zip/file
2) We connect our A30s and the PC should recognize it, if it doesn't then follow these steps:
2.1) Press and hold the Volume - and Power button and then connect the charger so that the phone tries to boot.
2.2) While it starts press the Volume + and The power button, since the cell phone in my case went into a Bootloop and with it was trying to start the TWRP, and with it this process will be interrupted, after them the A30s will be turned off and our PC will recognize it (IMPORTANT THAT THE A30S IS RECOGNIZED) - Do not forget that while you press the buttons the charger must be connected.
3) Open Jurassic Universal Android Tool and go to the "SERVER" section, and start "START ADB SERVER".
4) We go to "FASTBOOT", select Android
5) Click "ENTER FASTBOOT" - Leave it for 5 seconds.
6) Click "RECOVERY" and let it restart.
7) We click again in "ENTER FASTBOOT", we wait 2 seconds and in the part of below we click in "OFF SU"
8) And the same with "EXIT FASTBOOT".
9) We go to "RECOVERY" and let it start until half of the time it takes to restart, click OFF and quickly click REBOOT.
10) And it would be starting from the "Download Mode", only remains to enter Odin and install the factory operating system - https://www.sammobile.com/samsung/g...MA307GN/XID/download/A307GNDXU4CUF2/1561309/
(IF IT DID NOT WORK TRY TO PLAY A LITTLE WITH THE CONTROLS THIS WAS THE PROCESS THAT WORKED FOR ME I HOPE YOU HAVE SERVED - THIS TOOL REALLY WORKS GIVE IT A TRY)
Click to expand...
Click to collapse
Piyush Arora67 said:
Bro I'm facing the same problem... Have you solved it or not? If yes then please help me...
Click to expand...
Click to collapse
I have indeed solved it.

Categories

Resources