D I S C L A I M E R
READ BEFORE GO ANY FURTHER
Change IMEI number is illegal and i won't support that
This should be used only IF somehow you mess with your phone in order to loose IMEI number
This is a Guide "How-To" restore your IMEI number for Lenovo K910. This should work on any Qualcoom chipset though with minor changes.
Make sure your phone had at least 60% battery or more.
I am not responsible for any damage caused on your phone. Everything will be your responsibility.
Important Note: If any moderator and/or administrator felt this thread may be illegal feel free to close it!
Tools Needed:
Phone;
USB Cable;
QPST Application v2.7.323 (must be this version);
Patience;
Caution!!!
Step-by-Step Guide:
Install QPST application from above link;
Reboot yout PC;
Find your phone IMEI number on your phone box, battery, under battery, whatever;
Turn off your phone;
Open "Device Manager" on your PC;
Hold "Volume -" button and connect your phone to your PC through USB cable (this button suquence is for Lenovo K910 only);
Release "Volume -" button when Lenovo logo appear;
By this time your phone should enter on "Factory Mode" and your "Device Manager" should be able to see the following COM port (port number may difeer);
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Remember "HS-USB Diagnostic" COM number;
Open QPSTConfig as administrator(this should be on your installation path i.e C:\Program Files (x86)\QPST\bin);
Go to "Ports" tab and click "Add New Port";
On the new window uncheck "Show serial and USB/QC Diagnostic port only"
On "Port:" put COM number seen on "Device Manager" earlier;
On "Port Label:" you can put anything;
Click "OK"
By this time you should get something like: (don't bother with Phone code numbers. this should be different);
Now go to "Active Phones" tab;
Click on your phone from the list and go to "Start Clients";
On RF NV Item manager, go to "Settings > Comport";
Select your COM port and click "OK";
Click "File" > "Read Supported NV RF";
From the list, go to 550 number and you will get 9 blank lines;
Check "Hex" box;
BE CAREFULL NOW THIS IS THE MOST IMPORTANT THING!!!
You will see 9 text boxes and where you should put your IMEI number. You should do this EXACTLY as described or else...
You should put your IMEI backwards.
Let's take this number as an example: 954091051099226. The boxes should be filled like:
Code:
8 (This must go in the first box ALLWAYS!)
9a (The "[B]a[/B]" represents the fact that the last pair only consists of 1 number)
45
90
01 (this can be written as 1 as well)
15
90
29
62
or
Once you enter in the data, press Write Changed NV on "File"
Reboot your phone
Confirm your IMEI number by typing *#*#06#
Hope this will help you to recover your lost IMEI number:good:
Good luck and be very cautious!!!
Cheers
Crowds
[Reserved]
consulta
Crowds said:
[Reserved]
Click to expand...
Click to collapse
serviria para k910e dual sim
solo me reconoce sim2 en eg
la sim1 en 3g no la lee ni esta en pantalla
despues de brikearlo me reconoce solo una sim de 2g
como puedo poner la otra para que
la reconozca con este programa
en la caja solo viene un imei pero tenia dos tarjetas cuandol lo compre a china
venia en chino y al ponerle tu rom vibe 2 se me bloqueo
lo he recuperado con qpst pero solo pone una sim
le he instalado la version china de china telecom pero solo sale un imei
imei 1 : 0
imei 2 : 88273893900108 15 numeros que no son estos claro
*#06#
solucion por favor
maslenovo dice que puede cambiarlo pero es muy caro 75€
creo yo
muchas gracias.
Hi , do you know if this tutorial works for both dual sim and single sim variants ?
I too have lost the Imei on SIM 1 after changing the display.
Thanks
My K910 has been flashed to CM12. Will this method still work? It seems the key sequence to enter "factory mode" does not work. By the way, is the "factory mode" the same as "engineering mode?" The images are down so I cannot be sure.
Thanks.
mine was fixed and IMEI was back after factory reset , I'm on 4.2.2 1407 ROW rom , the best I know
can i put ant randomly generated imei no i lost my imei numbers cant find it anywhere its obi sf1 android phone
Facing read only error in final step of write change imei values
I lost my imei I have a lenovo phab pb1 750 m . it was on MM and I flashed stock ROM of lollipop version using lenovo downloaded tool.
My phone only shows com port in edl mode and not in fastboot or in adb ..but
This is how I finally got my device on active phones tab ..
Adb shell
Su
......diag...command...
After which connecting through com port 4
And my phone was listed under active phone tab and I proceed as you mentioned.
After reading my imei was blank and then finally writing my imei no. In boxes I cleck write changed values option under files tab. I get an error like
Unable to write 'NV_UE_IMEI_I' to the phone. (Parameter is write-protected and thus read only)
Please any help would or suggestions I need very much my phone would not connect to network wifi and other connections are working properly. Some how in this thread below they discussed the same problem and appear to solve it but I can't understand for my phone.
Thread link -
https://forum.xda-developers.com/showthread.php?t=1960918&page=1
Thank you hope you reply for very old post
I have a problem with port
my phone doesn't have COM Port in Windows 10 on my laptop
can I just handle it with another application?
---------- Post added at 09:58 PM ---------- Previous post was at 09:57 PM ----------
I have a problem with port
my phone doesn't have COM Port in Windows 10 on my laptop
can I just handle it with another application?
I found a way, you need to have "EFS PROFESSIONAL" its free!
1. flash combination files.
2. in IMEI option type +#0808# select DM+MODEM+ADB then leave the modem option showing next, then restart phone.
3. open EFS Professional, select Qualcom option, then your phone should show on com ports, then tap connect, Secure OPs, tap send password and the imei should show, right there you can change it or restore it from the original. tap write to phone. disconect and then turn phone off.
4. check imei +#06#
let me know if you need help
Thanks for your comment.
Am using Asus Pegasus X003.
Just flashed but somehow lost IMIE.
Do we need to root this device?
Can u pls explain step Flash Combination files?
Is there a way to do with for Mediatek devices? Specifically Redmi Note 8 Pro?
Use Engineering Mode
JuanM2020 said:
Is there a way to do with for Mediatek devices? Specifically Redmi Note 8 Pro?
Click to expand...
Click to collapse
You Can use Engineering mode on MediaTek devices to recover/change IMEI.
The method can be easily found on google/youtube.
Related
Hello,i get a problem exec '/system/bin/sh' failed: No such file or directory (2) when i root and unlock bootloader
i try to upgrade rom from 2.3.7 to ics
when i try to unlock bootloader get the problem,:crying:
View attachment 1312639
so i cannot process change kernal..
someone told me try root my phone again to solve this problem..
i follow and get this,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
same problem to..
*before that my phone was rooted.
possible fix it? hope someone can help me step by step..
This error says there is no sh file in your device..
Just check by using any root explorer
Go to system>bin in this bin folder There must be a file named sh about 2-4 mb in size.
If not that's the missing file and your problem too..
we all should be polite enough to press thanks for anyone who helped US.
I don't know exactly what piece of software that you are using, but the core of it is ADB.
adbd (the ADB daemon) on your device can not find your shell.
It doesn't exist at /system/bin/sh
Do you have it somewhere else on your device?
The shell path is hard-coded into adbd
Are you sure that the adbd on your device is the right one?
Yuan0120 said:
Hello,i get a problem exec '/system/bin/sh' failed: No such file or directory (2) when i root and unlock bootloader
i try to upgrade rom from 2.3.7 to ics
when i try to unlock bootloader get the problem,:crying:
View attachment 1312639
so i cannot process change kernal..
someone told me try root my phone again to solve this problem..
i follow and get this,
View attachment 1312642
same problem to..
*before that my phone was rooted.
possible fix it? hope someone can help me step by step..
Click to expand...
Click to collapse
Just try to reflash with your device with 2.3.7 again. If works, it mean something wrong with your ICS rom. How do you upgrade your rom? did you do via recovery or fastboot. I believed sh file is there but No enough permissions . normally works by fixing the permission
Hi, I encountered the same problem on my AVD device. The problem appeared after that I started the device with "-writable-system" flag. After that, I always have to start the device with this flag to avoid the error that you encountered too.
Buenas tardes tengo el mismo problema pero el mío es un mate 7 que que me aparece este error al tratar de entrar al sistema al tratar de pedir permiso shell me sale este error - exec '/system/bin/sh' failed no such file or directory (2) el celular está muerto aló que coje carga se enciende y se queda en el logo de Huawei no se reinicia se queda ahí y lo conecto al PC y en modo adb me lo reconoce
i get the sane error when i try: adb shell
exec '/system/bin/sh' failed: No such file or directory (2)
Some body solved this problem?? I have the same problem with a frozen amazfit stratos: when I try adb shell
- exec '/system/bin/sh' failed: No such file or directory (2) -
using port=5555
The EXEC command isn't available on Android ( i.e. part of it's ToyBox command suite ) unless BusyBox command suite is installed.
jwoegerbauer said:
The EXEC command isn't available on Android ( i.e. part of it's ToyBox command suite ) unless BusyBox command suite is installed.
Click to expand...
Click to collapse
How can I install BusyBox please?
AndreuMCA said:
How can I install BusyBox please?
Click to expand...
Click to collapse
Installing BusyBox basically requires device's Android is rooted - what in turn requires device's bootloader is unlocked and it's dm-veritiy and/or AVB lock is disabled.
I'm not sure what you mean.
I found busybox.exe for windows than I do not know what I have to do with this file, I ran it and created a lot of aplications files
And also I downloaded .apk file and I tried to install it in the amazfit wach using the tool Huami_Amazfit_Tool but do not work because some command use shell or similar and appears again the same error:
"'/system/bin/sh' failed: No such file or directory (2)"
The main thing is I have a Amazfit Stratos frozen on A logo. I can reboot it on fastboot only using manual method and is unlocked because I introduced the code but all the process to restore than I downloaded or I tried (recovery.bat, flash.bat, unbrick.bat...) all them in some moment use the comand "adb shell something" and here fails all restore process
The strange thing is than worked me installing the Pace firmware, the watch starts but the touch screen not works, and was veeery had back to Stratos because doing this I lost the serial number (null) and the fastboot was locked again so I spend a few hours to restore the watch to the initial point: statos completely frozen but unlocked.
After trying numerous ROMs without success and always getting "boot loops", I finally found a way to activate REAL 1080P on my Android Mini PC!!
This is NOT scaled 720p! The display resolution of 1920x1080 was confirmed with the Hardware Info app from Google Play.
Model: CYX_809III V5_2 20141105 with RK3188 CPU and WiFi/BT chip RTL8723BS (2G RAM, 8G NAND)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Photo sources: [1] [2] and [3])
*** If you don't have this EXACT model, STOP reading here! ***
WARNING: Flashing a new ROM WILL ERASE EVERYTHING on your device! BACKUP ALL DATA including the internal SD card before proceeding!
You assume all the risks and I am NOT responsible if you lose data or "brick" your device!
Here's the long story of how I did it. DO NOT follow the steps! Just read them and scroll down to the next section.
--- Begin Long Story ---
1. First, I downloaded this ROM: MK809III,UH007B_8723bs_4.4_1080_20140924, which can be found at:
http://chinagadgetsreviews.blogspot.com/2014/11/download-android-kitkat-442-firmware.html
https://yadi.sk/d/oLLygFotdc6K3
https://mega.co.nz/#!Z10mgYhT!SdubLh6SJZ1OYsyrCR80G8kaowNLAhNMbX1bNeIrPBs
2. I flashed the ROM above using the "RKBatchTool V1.7" (see bottom of post for links). After flashing, it did NOT work and resulted in a boot loop. Next, using the following ROM backup tool, I made a dump of the "system.img" of the above ROM.
http://freaktab.com/forum/developme...our-RK-device-(ROM)-with-the-new-RK-2-1-tool=
3. I then flashed the ONLY "working" ROM for this Mini PC (but 720p!), cyxtech_rk31_809iii_8723bs_141216_4.4_8g1g, which can be found at:
http://forum.xda-developers.com/hardware-hacking/android-sticks/cx919-ii-firmware-t2972279
http://pan.baidu.com/s/1qW1A12W
https://mega.co.nz/#!JlFFnb7Q!LyFbSfdKp526zqSJHmuO9oKrP1romqKaInZc7ianO50
4. Using the ROM backup tool above, I made a dump of the "parameter.txt" file of this "working" ROM. Then I modified the parameter.txt to account for the larger system.img from Step 2, which I will flash in the next step. I then made a dump of all other partitions from this ROM, and packaged them in my new ROM below.
5. Finally, using AndroidTool V2.3 OR RKAndroidTool v1.37 (see link below), I flashed the system.img which I dumped in Step 2 (from the ROM in Step 1). Before flashing it I had to load the modified parameter.txt file from Step 4. Then I rebooted and Voila! I was able to switch to real 1080p in the settings.
--- End Long Story ---
For your convenience, I have created a new ROM. All partitions were extracted from the "working" ROM in Step 3, with the exception of "system.img" which is from the ROM in Step 1. In other words, this is a "hybrid" ROM made from (1) and (3)! As mentioned above, the "parameter.txt" was edited to account for the larger system.img.
When flashing this ROM in AndroidTool V2.3 OR RKAndroidTool v1.37 (see link below), first click on "EraseIDB" （低格） to remove all existing NAND contents (make sure you have backups!) Then select ALL of the following: Loader, Parameter, Misc, Kernel, Boot, Recovery, System. Put a checkmark in front of each one (including Parameter) and be sure to choose the actual file from the extracted archive by clicking on the rightmost column of each item. Clear other checkmarks, double check everything and when ready, click the "Run" （执行） button.
Your Android stick should auto-reboot right after the flashing is done. Therefore, it is recommended to connect the USB power cable (if you have a spare one) while flashing, and when finished, let the Android stick initialize for some minutes before unplugging it from power.
This ROM contains Android version 4.4.2 (KitKat). To activate 1080p, you MUST go to Settings -> Display -> Screen -> HDMI Mode and choose a 1080p resolution. SuperSU is installed BUT the system does not seem to be rooted. If you get a notification that the NAND Flash cannot be mounted, just click on it and you will be prompted to format it.
Again, if you do not have the EXACT device model mentioned in this post, STOP here and don't flash!
Download link for my new ROM (from Yandex Disk):
https://bit.ly/809iii-1080p-rom
(MD5 sum: 41d0149be7876516c0a614d9285fc999)
Alternative download mirrors:
https://bit.ly/809iii-1080p-rom-mirror1 (from Dropbox)
https://bit.ly/809iii-1080p-rom-mirror2 (from 4Shared)
The various tools for flashing the ROM, and related instructions can be found here:
http://radxa.com/Rock/flash_the_image
(To enter "loader mode", power off your android stick, then press and hold the Fn button on its side,
while connecting the usb cable from "OTG port" to your computer)
If you use this ROM please share your experience by replying to this thread!
Comments and feedback are welcome!
FYI ONLY - The following are NOT needed unless you need to recover from a "bricked" device:
How to enter MASKROM mode and flash using the RKBatchTool (requires full image of the original ROM or another "working" ROM):
http://freaktab.com/forum/tv-player.../11306-cx919-ii-j22-dont-work-after-the-flash
http://linux-rockchip.info/mw/index.php?title=Boot_Sequences#MASKROM_Mode
http://radxa.com/Rock/unbrick
**Update**
An issue with the new ROM was identified and fixed as of 7PM UTC on 05/18/2015. The updated ROM containing the fix had been uploaded. If you downloaded the ROM prior to the date/time above, please re-download it from the link in the first post and follow the instructions again.
All flashing instructions have been tested on my own device and confirmed working.
Thanks so much for posting this. I finally managed to un-brick my TV stick and get it working again, now with real 1080p!
I used RKAndroidTool v1.37, entered the offsets manually from parameters.txt according to your file and everything flashed successfully after hours of repeated attempts to flash various other ROMs. Originally I was trying to flash various Linux images unsuccessfully and I thought I bricked the device. Turns out I didn't. Thanks again!
boa noite , agradeço a este post .foi onde encontrei o que precisava . meu mini pc voltou a piscar novamente .
Porem esta desligando sozinho .
mesmo assim obrigado
Great Work
Thank you very much, just what I needed to resurrect my android tv, the rom is very smooth, fluid and faster than the original, great work.
I know this is an old thread, but i just got 2 of these tv sticks, they already run on 1080p but i was wondering if you know how can i enable screen rotation? i'm trying to use them to display on vertical screens. Thanks
Hello,
Try with this, https://forum.xda-developers.com/showthread.php?t=2331514
or an similar app .
Good luck.
baquerom said:
Hello,
Try with this, https://forum.xda-developers.com/showthread.php?t=2331514
or an similar app .
Good luck.
Click to expand...
Click to collapse
I will try it, thank you very much
I tried rotation apps, and it doesn't work. I think the sticks have the gyroscope disabled, do you know how i can enable it? i was trying to create a rom backup to edit the code but really don't know what i'm doing
mendesmendes said:
boa noite , agradeço a este post .foi onde encontrei o que precisava . meu mini pc voltou a piscar novamente .
Porem esta desligando sozinho .
mesmo assim obrigado
Click to expand...
Click to collapse
Amigo, o meu estava assim, ele esquentava muito e reiniciava, então adaptei uma ventoinha de 5v e 4x4cm que comprei no ebay, soldei direto na usb, nunca mais deu problema, ja tem mais de um ano, voltei nesse site, procurando alguma att... porque android 4.4 ta por fora, gosto do Mk809, mas não atualiza netflix, kodi e nem roda h265x ... o que me resta é comprar outro, foram 4 anos de bom uso.
Abraços e espero ter ajudado.
Enable VoLTE Poco X3 Pro (probably on other MIUI devices)
Tested and active Operator Tim Brasil.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is necessary?
SOURCE
USB cable
QPST Download the latest version
Drivers
Terminal Emulator: Termux or Terminal Emulator for Android (play store)
Recommended backup EFS (recovery and QPST)
How to make!
Install QPST (Next, Next, Next, Finish)
Install the drivers (Next, Next, Next, Finish)
Restart the computer.
Enable USB debugging in developer settings
Disable operator verification with the code * # * # 86583 # * # *.
Activate VoLTE in Settings> Mobile networks> YES
Restart the device
Connect the device via USB
Open Terminal Emulator on your device and type the command below:
su
setprop sys.usb.config diag, serial_cdev, rmnet, adb
Start the PDC (QPST tool)
Select your device from the selection menu
Right-click on ROW_Commercial> Deactivate> Sub0 and Sub1
Right click on UMobile_Commercial_Malaysia> SetSelectedConfig> Sub0 and Sub1
Select ROW_Commercial and click REMOVER.
Select UMobile_Commercial_Malaysia and click ACTIVATE
Finished !!
No restart is required.
Credits to the user @cassiocmg because I used his tutorial as a model.
I have VoLTE out of the box why you are not ?
astronomy2021 said:
I have VoLTE out of the box why you are not ?
Click to expand...
Click to collapse
I bought my X3 Pro 15 days ago. There was a Redmi Note 8 Pro and it worked normally. But with the X3 Pro the IMS was not supported. Only with this tutorial it worked
I followed this guide and it works, no need for USB, drivers, terminal.
https://c.mi.com/thread-3344064-1-0.html
baxxx2 said:
Segui este guia e funciona, sem necessidade de USB, drivers, terminal.
[URL unfurl = "true"] https://c.mi.com/thread-3344064-1-0.html [/ URL]
Click to expand...
Click to collapse
This guide I had used on my previous device. But it didn't work on my Poco X3 Pro.
But it’s good that it worked for you.
tftcamilo said:
This guide I had used on my previous device. But it didn't work on my Poco X3 Pro.
But it’s good that it worked for you.
Click to expand...
Click to collapse
Did you try other MIUI roms like MIUI by Xiaomi.eu?
Maybe it's regional restrictions that makes the code don't work.
pl1992aw said:
Did you try other MIUI roms like MIUI by Xiaomi.eu?
Maybe it's regional restrictions that makes the code don't work.
Click to expand...
Click to collapse
I haven't tried it, I'm using global with root / magisk only. but as it all worked out I didn't see the need to look for a new rom.
tftcamilo said:
Enable VoLTE Poco X3 Pro (probably on other MIUI devices)
Tested and active Operator Tim Brasil.
View attachment 5312623
What is necessary?
SOURCE
USB cable
QPST Download the latest version
Drivers
Terminal Emulator: Termux or Terminal Emulator for Android (play store)
Recommended backup EFS (recovery and QPST)
How to make!
Install QPST (Next, Next, Next, Finish)
Install the drivers (Next, Next, Next, Finish)
Restart the computer.
Enable USB debugging in developer settings
Disable operator verification with the code * # * # 86583 # * # *.
Activate VoLTE in Settings> Mobile networks> YES
Restart the device
Connect the device via USB
Open Terminal Emulator on your device and type the command below:
su
setprop sys.usb.config diag, serial_cdev, rmnet, adb
Start the PDC (QPST tool)
Select your device from the selection menu
Right-click on ROW_Commercial> Deactivate> Sub0 and Sub1
Right click on UMobile_Commercial_Malaysia> SetSelectedConfig> Sub0 and Sub1
Select ROW_Commercial and click REMOVER.
Select UMobile_Commercial_Malaysia and click ACTIVATE
View attachment 5312627
Finished !!
No restart is required.
Credits to the user @cassiocmg because I used his tutorial as a model.
Click to expand...
Click to collapse
Dude, in my list of "Description" i cant see "Umibole_Commercial_Malaysia " i can see other's. I'm in Brazil too and using TIM. ALso cannot see " Peru_Commecial" like another post. Can u help me?
sunshine7x said:
Dude, in my list of "Description" i cant see "Umibole_Commercial_Malaysia " i can see other's. I'm in Brazil too and using TIM. ALso cannot see " Peru_Commecial" like another post. Can u help me?
Click to expand...
Click to collapse
Go testing one by one. Wire what I did. You test if it doesn't work, undo it and go to the other
Will this work for custom roms??
Or are they already enabled??
https://c.mi.com/thread-3344064-1-0.html
Worked with me on MIUI Global 12.5.2 - Poco X3 Pro
Go Dial and enter *#*#86583#*#*
A popup message appears "VoLTE carrier check disabled" and VoLTE enables, also available on SIM card settings.
If you got the "VoLTE carrier check enabled" message, please do again.
i can do this with locked bootloader?
Can you guys help me understand if I have or not Volte enabled?
I'm on MIUI 12.5.2 with magisk, i enabled volte with *#*#86583#*#* and I also installed the magisk module, in SIM options I have both VoLTE and calls using WiFi enabled. Also with *#"#4636#*#" the VoLTE and Wi-Fi calls options are enabled but grey out, but I don't have the VoLTE icon on status bar, only a 4G+ symbol above the network strength bars. I have the HD symbol on the call screen and in the call history, I also tried successfully to browse internet while on a call (without wifi). I don't get, it looks like I have VoLTE enabled but I don't have any icon on status bar like lot of screenshots around.
DrunphO said:
Can you guys help me understand if I have or not Volte enabled?
I'm on MIUI 12.5.2 with magisk, i enabled volte with *#*#86583#*#* and I also installed the magisk module, in SIM options I have both VoLTE and calls using WiFi enabled. Also with *#"#4636#*#" the VoLTE and Wi-Fi calls options are enabled but grey out, but I don't have the VoLTE icon on status bar, only a 4G+ symbol above the network strength bars. I have the HD symbol on the call screen and in the call history, I also tried successfully to browse internet while on a call (without wifi). I don't get, it looks like I have VoLTE enabled but I don't have any icon on status bar like lot of screenshots around.
Click to expand...
Click to collapse
I believe it is not activated. Click on the 3 dots below and see the pop up that opens in IMS. It should look like the image below.
tftcamilo said:
I believe it is not activated. Click on the 3 dots below and see the pop up that opens in IMS. It should look like the image below.View attachment 5451091
Click to expand...
Click to collapse
It's exactly what I have but still don't have the VoLTE icon (I'm in stock MIUI 12.5.5.0)
Sorry double post
DrunphO said:
Desculpe postagem dupla
Click to expand...
Click to collapse
DrunphO said:
Desculpe postagem dupla
Click to expand...
Click to collapse
DrunphO said:
É exatamente o que eu tenho, mas ainda não tenho o ícone VoLTE (estou em estoque MIUI 12.5.5.0)
View attachment 5451123
Click to expand...
Click to collapse
Nesse caso, pode ser algo da sua operadora.
In this case, it could be something from your operator.
Your QPST link is bad, it's ttps//qpsttool.com/
It should be https://qpsttool.com/
Hi there I need a help, please.
I followed the step in here https://magiskapp.com/install-twrp-recovery-on-any-android/
After I use Odin to install twrp recovery, it was pass then I restarted my phone with appear logo Samsung screen with white font then green (pics below).
So, the phone cannot boot anymore.
Any suggestion how do I fix my phone please?
I used stock rom at this link https://www.sammobile.com/samsung/g...M-A307GN/XID/download/A307GNDXU4CUF2/1561309/
My device is Samsung A30s with Android 11.
How can I root my Android 11? and How do I fix it? I tried several days to look but I didn't found.
I thank you so much for the help and waiting for you guys
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try reflashing stock ROM, then reflash twrp WITH auto reboot in options of odin DISABLED
I tried several times to turn my phone to up again, with push volume button up + down with power button but only appear samsung logo and turn back off again and again. How can I restart back to Download mode so I can re-flash the stock rom again? Sorry I am newbie here.
Download and install Samsung's "Android USB driver" suitable to this phone, if not done yet.
Download Samsung USB Driver for Windows (Latest Driver)
Download the latest Samsung USB Driver to connect Samsung Smartphone and Tablets to the Windows Computer without installing Samsung Kies.
androidmtk.com
I try using cmd 'adb reboot recovery' the phone restart appear logo white Samsung and turn to green Samsung just like the above my pics (the same) then cannot boot in anymore. Where can I fix please ....
Hello there, I try the following command, '-fastboot reboot bootloader' then it appear my phone to Download mode. After that I start re-flash with Odin, success back to Samsung A30s Android 11 stock rom. But it started normally back to normal. How can I root Android 11 in the right way. I had failure many times when I root with Magisk 23 and TWRP. Does Anyone here to give me a hint, please???
After I struggled to root my Samsung SM-A307GN/DS Android 11. I found that I could bypass the admin root level successfully. Here are what I did and I follow my own steps below:
1). Unlocked the bootloader after I clicked 7 times to get Developer mode opened.
2). I downloaded the last Samsung firmware new update for Android 11 (I used Bitfrost apps)
3). Extracted the Zip file of stock ROM,
(I used command 'adb reboot fastboot' in download mode) my Odin worked to re-flash my phone.
4). Reboot again and enable USB debugging
5). I installed Magisk Canary
6). I extracted and took "boot.img.lz4" taken from file AP_A307GNDXU4CUJ2_CL22825772_QB45126107_REV00_user_low_ship_meta_OS11.tar.md5
7). Transfer the file "boot.img" to my external SD card on my phone.
8). I patched the "boot.img" with Magisk canary apps.
9). I rename the boot patch and re-pack it again with tar archieve
10. The "boot.tar" was written by Odin (in the field AP), reboot again
11. Wipe data and cache in recovery mode (delete everything to clean up.
12. Install the Magisk again and Root checker
13). It was nicely D.O.N.E !!!!!
Bro I'm facing the same problem... Have you solved it or not? If yes then please help me...
[email protected] said:
Hola, ¿Qué tal?, yo también he tenido ese problema, estuve investigando un poco pero casi no hay información sobre este problema al actualizar el TWRP, solo utilizaremos un programa para poder acceder de nuevo al "Modo descarga", Pasos a seguir:
1) Descargar Jurassic Universal Android Tool v5.0.2
https://www.mediafire.com/file/sppiuup6glh5e7p/Jurassic_Universal_Android_Tool_v5.0.2.zip/file
2) Conectamos nuestro A30s y el PC lo debe reconocer, si no lo hace entonces sigue estos pasos:
2.1) Mantén oprimido el Volumen – y El botón de encendido y luego conectas el cargador para que el celular trate de iniciar
2.2) Mientras se inicia presiona el Volumen + y El botón de encendido, ya que el celular en mi caso entraba en un Bootloop y con ello se trataba de iniciar el TWRP, y con ello este proceso se interrumpirá, después de ellos se apagará el A30s y nuestro PC lo reconocerá (IMPORTANTE QUE EL A30S SEA RECONOCIDO) – No olvidar que mientras presionas los botones el cargador debe estar conectado
3) Abrimos Jurassic Universal Android Tool y nos vamos al apartado de "SERVER", e iniciamos "START ADB SERVER"
4) Nos dirigimos a "FASTBOOT", seleccionamos Android
5) Hacemos click en "ENTER FASTBOOT" - Dejamos 5 segundos
6) Hacemos click "RECOVERY" Y dejamos que se reinicie
7) Hacemos click de nuevo en "ENTER FASTBOOT", esperamos 2 segundos y en la parte de abajo damos click en "OFF SU"
8) Y lo mismo con "EXIT FASTBOOT"
9) Nos vamos a "RECOVERY" Y dejamos que inicie hasta la mitad del tiempo que se tarda en reiniciarse le damos en OFF y rápidamente le damos en REBOOT
10) Y ya estaría iniciándose desde el "Modo descarga", solo queda entrar a Odin e instalar el sistema operativo de fabrica - https://www.sammobile.com/samsung/g...M-A307GN/XID/download/A307GNDXU4CUF2/1561309/
(SI NO TE FUNCIONO INTENTA JUGAR UN POCO CON LOS CONTROLES ESTE FUE LE PROCESO QUE A MI ME FUNCIONO ESPERO TE HAYA SERVIDO – ESTA HERRAMIENTA DE VERDAD FUNCIONA DALE UNA OPORTUNIDAD)
Click to expand...
Click to collapse
[email protected] said:
------------------------------------------------------------------------------------------------------------------------------
Hi, Howdy, I have had that problem too, I was doing some research but there is almost no information about this problem when updating TWRP, we will just use a program to be able to access the "Download Mode" again, Steps to follow:
1) Download Jurassic Universal Android Tool v5.0.2
https://www.mediafire.com/file/sppiuup6glh5e7p/Jurassic_Universal_Android_Tool_v5.0.2.zip/file
2) We connect our A30s and the PC should recognize it, if it doesn't then follow these steps:
2.1) Press and hold the Volume - and Power button and then connect the charger so that the phone tries to boot.
2.2) While it starts press the Volume + and The power button, since the cell phone in my case went into a Bootloop and with it was trying to start the TWRP, and with it this process will be interrupted, after them the A30s will be turned off and our PC will recognize it (IMPORTANT THAT THE A30S IS RECOGNIZED) - Do not forget that while you press the buttons the charger must be connected.
3) Open Jurassic Universal Android Tool and go to the "SERVER" section, and start "START ADB SERVER".
4) We go to "FASTBOOT", select Android
5) Click "ENTER FASTBOOT" - Leave it for 5 seconds.
6) Click "RECOVERY" and let it restart.
7) We click again in "ENTER FASTBOOT", we wait 2 seconds and in the part of below we click in "OFF SU"
8) And the same with "EXIT FASTBOOT".
9) We go to "RECOVERY" and let it start until half of the time it takes to restart, click OFF and quickly click REBOOT.
10) And it would be starting from the "Download Mode", only remains to enter Odin and install the factory operating system - https://www.sammobile.com/samsung/g...MA307GN/XID/download/A307GNDXU4CUF2/1561309/
(IF IT DID NOT WORK TRY TO PLAY A LITTLE WITH THE CONTROLS THIS WAS THE PROCESS THAT WORKED FOR ME I HOPE YOU HAVE SERVED - THIS TOOL REALLY WORKS GIVE IT A TRY)
Click to expand...
Click to collapse
Piyush Arora67 said:
Bro I'm facing the same problem... Have you solved it or not? If yes then please help me...
Click to expand...
Click to collapse
I have indeed solved it.
Hey, everyone. This is my first time on this site. I don't have a lot of experience with android as I am more of an iphone guy. I'm the manager of a small doctor's office here in south Texas and, until recently, we've been using the PAX A920 to take payments on. Doc said he didn't want the devices anymore and that I could have them to play around with. I'd like to completely wipe the devices and install just a straight android OS on it. But I have tried literally everything I can think of. I'll list a few things about the device, everything I have tried, and a few pictures below. Any help would be greatly appreciated.
Device specs and things I've tried:
When I plug the device into my computer (OS X Monterey) and open the Android File Transfer tool, I can see a little bit of stuff that is on the device, and a notification pops up on the PAX that says "USB debugging connected. Touch to disable USB debugging"
I can drag and drop APK's to the device but none will successfully installDeveloper Options cannot be accessed. When I try to tap the build number, a message displays at the bottom of the screen that says "You are not debugging and have no access to developer mode !" In exactly that format. I've also tried to enable developer mode with ADB using "adb shell settings put global development_settings_enabled 1" but that didn't work either.
When I turn off the device and power it back on, while holding the power button and volume up button, it displays the PAX boot logo but it says "Firmware Developer Mode" underneath it. It does nothing else from that point. I tried letting it sit for like 6 hours and nothing ever happened.
It appears that PAX devices use their own custom android based OS called Paydroid and I can't find anything about it after some pretty extensive google searches.
The build number is PayDroid_5.1.1_Aquarius_V02.3.17_20181026
The Kernel version is 3.10.49
It's running on Lollipop
Underneath processor, it says "Qualcomm Technologies, Inc MSM8909
The device has it's own store called PAXStore but it's pretty useless
You can't browse the internet on it
There's a whole bunch of crazy looking applications loaded on the device but you can't access any of them.
ADB recognizes the device but almost any command I use that targets the device literally does nothing. No success message when using "adb install" and no output with "adb shell getprop" or adb wm size". Zero. Zilch. Nada. The only one that actually gave me some form of output was the "adb pull /system/build.prop" and that one was "adb F 01-20 10:43:25 72984 1577471 file_sync_client.cpp:499] protocol fault: failed to read stat response: Undefined error: 0
zsh: abort adb pull /system/build.prop"
Fastboot does not recognize that there is a device connected even when I boot it up by holding down the power button and volume up.
This is the WEIRD part. I made a new user on the device and when it switched to the new user, it popped up with the usb debugging notification AND "sdcard is mounted". But there's no sd card listed in the storage or in the files app. There's a slot in the battery bay for a micro sd card, but I haven't put one in and I verified that there isn't one in there. Makes me think that there might be some sort of storage drive physically installed somewhere on the motherboard.
I'm serious. ANY help would be greatly appreciated. This isn't even about why I was originally trying to do this. I've invested days into this and quite frankly just want to be able to say I've done it.
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just found out about how Qualcomm processors have EDL mode on them so I tried that but still no potato
hello, i have several tools for dobby a910 and a930, except for a920 would you like to work together to achieve it?
TheDoctor549 said:
Firmware Developer Mode
Click to expand...
Click to collapse
in firmware developer mode do you get it to show up to fastboot or not?
does fastboot oem unlock or fastboot flashing unlock work by any chance?
if yes can use this twrp or not? https://forum.xda-developers.com/t/recovery-scale-twrp-3-1-1-0-for-huawei-y6-2017-06-25.3627208/
Jefex22 said:
hello, i have several tools for dobby a910 and a930, except for a920 would you like to work together to achieve it?
Click to expand...
Click to collapse
Hi Jefex22. Can you help me to flash my a910 please?
Jefex22 said:
hello, i have several tools for dobby a910 and a930, except for a920 would you like to work together to achieve it?
Click to expand...
Click to collapse
você pode ajudar com duas maquinas? a910 e a930 queria usar elas com o whatsapp, imprimindo fixa de caixa, ganhei elas do meu antigo patrão! e queria usar de algum modo! mas nao acho o paydroid e nada sobre, parece segredo da maçonaria kkkk sou professor de robotica manjo um pouco de programação mas essa rom que vem nesses dispositivos são fechdas
Mod translation via GT: can you help with two machines? a910 and a930 I wanted to use them with whatsapp, printing fixed cash, I got them from my old boss! and wanted to use it somehow! but I don't find paydroid and nothing about it, it seems a secret of Freemasonry lol I'm a robotics teacher I know a little bit of programming but this rom that comes in these devices are closed
You can use a sequence of commands to get some fastboot output:
Bash:
adb reboot bootloader
The device will restart. then...
Bash:
fastboot devices
You will see the device listed. Then you can use the fastboot commands
Hello guys, I have the same problem with PAX A930, did you get something? please share your experience!
Eu posso fazer o 910 e 930
Vasarely said:
Eu posso fazer o 910 e 930
Click to expand...
Click to collapse
O que eu preciso para você me ajudar?
Pessoal quem quiser entrar em contato comigo 81997027921, trabalho por unidade, instalo o que quiser.
I can't get my Pax A920 to allow me to enable usb debugging, and it doesn't do anything at the firmware download mode screen. Fastboot and ADB don't see it. i'm able to see it in device manager and has a storage device to copy files.
Hi all you must be a developer from pax, To be honest, I have done it before, It appears that PAX devices use their own custom android based OS called Paydroid, and I try to enter developer pax but just the lowest authorization, and I only get auth on the official website, and only a few serial numbers open for me, this is very annoying, I try to manipulate reverse their program, and are constrained because the tool used is in Chinese askara which I find difficult to understand, here's my experiment with a device that is not my authorization, you can contact me from telegram if u interest https://t.me/paydroid
Jefex22 said:
hello, i have several tools for dobby a910 and a930, except for a920 would you like to work together to achieve it?
Click to expand...
Click to collapse
how to call you
Share on WhatsApp
WhatsApp Messenger: More than 2 billion people in over 180 countries use WhatsApp to stay in touch with friends and family, anytime and anywhere. WhatsApp is free and offers simple, secure, reliable messaging and calling, available on phones all over the world.
api.whatsapp.com
Hello everyone, I have created a group to exchange experiences for POS devices and Exchange firmware and tools
You can contact me from Telegram if you are interested
POS & ATM Hardware & Software Solurion Repairing
Finding problems and solutions and providing firmware and tools
t.me
Hello everyone, I have created a group to exchange experiences for POS devices and Exchange firmware and tools
You can contact me from Telegram if you are interested
POS & ATM Hardware & Software Solurion Repairing
Finding problems and solutions and providing firmware and tools
t.me