Database Info

need a lcd, touch pro 2 fit the 7 pro?

Hi, i am in desperate need of a lcd display for a 7 pro but they are seriously hard to get hold of!
I have looked on ebay and theres only ones from HK or China and even then the sellers feedback on screens is poor!
I have phoned countless repair shops in the uk and only a couple claim to be able to get hold of the screen but then demand that they fix the phone themselves and a stupid fee and will not supply the screen to me.
one thing i have noticed it that the touch pro 2 and 7 pro screens look identical apart from the colour of the ribbon that connects them to the main cable that goes through the slide body.
there is no visual difference between the screens or connector cables other thab colour and they have the same specs also-
480 x 800 pixels, 3.6 inches and a 259 ppi pixel density
Does anyone know if they are actually interchangeable or not? i cant find a screen anywhere and my wife is not pleased with me right now as ive only just got the phone and a broke the lcd trying to remove the digitizer even though i was ultra carefull and used lots of heat, please can someone help!!!!
Thanks, Steve.

Hello! To most simply answer your question, no. The screens are very different despite looking similar. The old TP2 screen is not multitouch and WP7 requires this. Also, the old screen utilizes a stylus while the newer 7 pro screen doesn't even recognize that type of touch.
It is your phone after all, so if you would like to try this that's your choice. However its too much effort to affix the ribbon to the pcb to even make it worth it. My old TP2 has a cracked digitizer which I have a replacement for, but the ribbon is machine pressed onto the pcb and reattaching this connection would be very difficult without the type of heat/pressure used in the manufacturing of the phone.
If you decide to try it let us know the results!

I'm sorry, I just seen you said the lcd itself, I thought you were meaning the digitizer screens.
That being said, maybe the swap will work, as long as they hook up the same?

x_orange90_x said:
I'm sorry, I just seen you said the lcd itself, I thought you were meaning the digitizer screens.
That being said, maybe the swap will work, as long as they hook up the same?
Click to expand...
Click to collapse
i found a seller with genuine touch pro 2 screens who is willing to take it back if it does not work for me, i will let everyone know if it works!

I can confirm, the touch pro 2 screen does NOT work in the 7 pro, it is almost identical but the conector is at most 1mm wider than the 7 pro but its enough to stop if fitting into the socket
Back to the drawing board for me i guess.

steve_htc_wizard said:
I can confirm, the touch pro 2 screen does NOT work in the 7 pro, it is almost identical but the conector is at most 1mm wider than the 7 pro but its enough to stop if fitting into the socket
Back to the drawing board for me i guess.
Click to expand...
Click to collapse
not sure if you still need an LCD, or maybe you got a new phone by now. I found this if your still interested in getting it up and going again.
http://www.ebay.com/itm/271230982583

x_orange90_x said:
not sure if you still need an LCD, or maybe you got a new phone by now. I found this if your still interested in getting it up and going again.
http://www.ebay.com/itm/271230982583
Click to expand...
Click to collapse
not been on for a few days, thankyou for the link its still there and in europe!
I bought another 7 pro handset as i could not wait any longer, i had been forced back to my old Touch pro (raphael) and although not a bad phone and running a custom 6.5.3 rom , it just cant cope on the web anymore as all the standards have changed and nobody is supporting windows mobile anymore.
Its a shame cos windows mobile is by far a better operating system than windows phone, updated and running on better hardware it would have rocked.
even though i bought a new handset ive always intended on fixing the other one when i get the chance and have put a bid on that screen to remove the buy it now.
Fingers crossed that it dont go up in price, my wife will kill me if spend much more on these phones lol
once its fixed its going to go in its box and live in a safe place till ive worn out this new one, dont think i wll sell it, thanks for your help, you get a thanks meter point for this :good:
Steve.

You are welcome I was a little worried you might not get to the link fast enough but thankfully you did! I seen that and figured its a steal considering the lcd is nearly that price alone, plus all the work needed to change it. Good luck I hope you win it

Thanks geeze

x_orange90_x said:
You are welcome I was a little worried you might not get to the link fast enough but thankfully you did! I seen that and figured its a steal considering the lcd is nearly that price alone, plus all the work needed to change it. Good luck I hope you win it
Click to expand...
Click to collapse
hey orange, i won that screen, got it for the starting bid, its on its way here at the moment, there was a delay in paying for it as my card decided bit to work on pay pal grrrr but its all sorted now, just gotta wait.
thanks again.

Hey guys a little question I have my old galaxy tab 7.0 plus which Samsung wont repair no reason can i just buy a 7in screen and repair it my self since there are many screens here in Philippines
Sent from my GT-P6800 using XDA Premium 4 mobile app

captsingh787 said:
Hey guys a little question I have my old galaxy tab 7.0 plus which Samsung wont repair no reason can i just buy a 7in screen and repair it my self since there are many screens here in Philippines
Sent from my GT-P6800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
as long as you get the right screen, theres no reason why you cant do it yourself, just go slow, very slow, read tutorials and be very carefull of all cables and boards inside. if it its the glass digitizer that is broken and not the whole display, be very very carefull when removing it from the lcd as theres a big chance of breaking the lcd as its removed, heat to relax the glue is your friend! if the glass is shatterd, removing the glass bit by bit instead of trying to remove it all at once may proove easyer and less risky on the lcd.
Good luck, steve.

Look at this auction: http://www.ebay.pl/itm/HTC-7-pro-Arrive-T7576-LCD-Display-/141028832234?pt=UK_Replacement_Parts_Tools&hash=item20d5f933ea&_uhb=1 this is display for 7 Pro.

Probably stuck or dead pixel

Hi guys, yesterday i recieved my OPO and i noticed that there is a little dark point ( watchable only on white screen) which probably is a stuck or dead pixel. The point is very very little and amost unwatchable during normal use , but i m very finicky......what can i do? Is possible to obtain a replacement of the phone for only one pixel? Thanks for your suggestions!!!

Only OnePlus can answer that question, there's no point asking here because nobody here is an employee of OnePlus. If it is defective though, they should cover it under warranty.
Transmitted via Bacon

timmaaa said:
Only OnePlus can answer that question, there's no point asking here because nobody here is an employee of OnePlus. If it is defective though, they should cover it under warranty.
Transmitted via Bacon
Click to expand...
Click to collapse
But no one bere with a similar situation? Just no know if there is a possibility to obtain the change. I have already opened a ticket on OPO official site, but no reply at now.

Basic warranty policy states that if a device is defective out of the factory you are entitled to a replacement.
Transmitted via Bacon

I have a dead pixel too - but honestly - is it worth making such a big deal out of it?! Why don't you just live with it and save you all the trouble? It's not worth it in my opinion - what if you get another device with a yellow band in exchange? That would be worse wouldn't it? There are bigger problems than just one dead pixel - if it were green all the time that would be much worse.

Numero7 said:
But no one bere with a similar situation? Just no know if there is a possibility to obtain the change. I have already opened a ticket on OPO official site, but no reply at now.
Click to expand...
Click to collapse
ugh I have the same situation with my new oneplus one, this didnt happen on my old one but there is a dead/stuck pixel near the top that is green usuallly very hard to notice but sticks out like a sore thumb on black backgrounds. i am just going to deal with it unless it gets much worse is there any way to fix it short of replacing the hardware?

my co-worker has 1 stuck pixel, like you, its only visible on a white background. OPO's defective policy is only for 3 pixels or more. he ended up selling it on craigslist for the price he bought it at.

I have the exact same issue and feel the same way, though I haven't bothered with a ticket yet because I feel lucky to even have one given the extremely short supply. They haven't made a specific statement on dead pixels in the FAQs, but here are a couple close ones:
What is your warranty & return policy?http://oneplus.net/support/answer/what-is-your-warranty-return-policy
What should I do if I receive a defective product?http://oneplus.net/support/answer/what-should-i-do-if-i-received-a-defective-product
Other than that, thishttps://forums.oneplus.net/threads/dead-pixel.68381/#post-3362283 is about the most useful statement I could find from any admin on the topic. >.<
You can also do like I might and wait for your shared invites to come in, use one to buy a new phone, then sell your current one on eBay or something. Just be sure to be honest about any issues with it. Given the low supply you'd probably still get darn close to retail for it.
Sent from my OnePlus One using the XDA mobile app.

Stuck pixel here
Though I bought the phone nearly two months back, got it only today from a friend travelling from the US as my country is unsupported yet for shipping.
I discovered a white stuck pixel that stays on in any damn screen when the phone is on.
Pete Lau was drumbeating so much about being very strict with quality, but if so many people are complaining about the screen, this is not good.

Depending on whether the pixel is actually dead (meaning it either gets no power or shortened) or stuck (crystal can't rotate) you may be able to revive it. There are applications for that purpose in the Play store that very quickly toggle through several colors in the hope of jiggling the pixel free - leave it running for a few hours and check if the screen is fixed.

Numero7 said:
But no one bere with a similar situation? Just no know if there is a possibility to obtain the change. I have already opened a ticket on OPO official site, but no reply at now.
Click to expand...
Click to collapse
Hello! Yes!
I have a stuck pixel at my opo. I can just give you one advise. Don't change it. Just don't care about those pixels and more important: Don't search dead pixels. I wad also like you, and so i ordered 3x htc one x, 3x galaxy s3 and all of them had dead pixels or stuck pixels. Also my galaxy s4 had one, and my lg g2! So every ****in phone has them. It's like a big joke and you need very good luck to get one without.
So now i have my opo, and also have 1 stuck pixel. But you know what, i don't care. You have to learn this.
Otherwise you'll be going crazy. Just be happy with your phone. In some time you will get another phone anyway.
So pfff.

d4fseeker said:
Depending on whether the pixel is actually dead (meaning it either gets no power or shortened) or stuck (crystal can't rotate) you may be able to revive it. There are applications for that purpose in the Play store that very quickly toggle through several colors in the hope of jiggling the pixel free - leave it running for a few hours and check if the screen is fixed.
Click to expand...
Click to collapse
Thanks @d4fseeker. Any tips on which apps we can try?

I had success on a friend's phone a while back with this app:
https://play.google.com/store/apps/details?id=com.htc.chris.blackspotdetect

Thank you
d4fseeker said:
I had success on a friend's phone a while back with this app:
https://play.google.com/store/apps/details?id=com.htc.chris.blackspotdetect
Click to expand...
Click to collapse
Thank you. Have hit the button as well

Yup! Stuck pixel here, it appeared after having the device for less than a day, it's 1 red pixel, so it's not visible on white background. But dark background its right in my face.
I had a little cluster of white pixels on my m7, never really bothered by it.
The way oneplus handle this, I don't think I'll even bother to try to get a replacement device. Well, that's the price we pay for buying from cheap Chinese manufacturer.

rbrandser said:
that's the price we pay for buying from cheap Chinese manufacturer.
Click to expand...
Click to collapse
You do know that "3+ dead/stuck pixels" is what major brands also require for replacement?

Anyone replaced a screen on one of these?

Sorry, I know this is a developer site, but I'm at a loss here.
I have a Verizon M8 for Windows that had a dodgy touch screen. Everything else worked fine. I purchased an LCD/digitizer and installed it. LCD wont come on. Phone powers on, syncs to PC, I can navigate around by taking screen shots and viewing on the PC, so I know the phone is working ok.
So, I purchased a 2nd screen, thinking the 1st one might be faulty. Same thing. No LCD. If I plug the original LCD in, it lights up fine (I cracked it removing the digitizer, so can't re-use it).
Next, I purchased a good, tested 2nd hand motherboard (Verizon, For windows) thinking I may have damaged the LCD connector. Still no LCD display.
Does anyone know if the screens are specific to either the Verizon or Windows Phone versions? Or anything else I might be missing? I've been repairing phones for years (mostly iPhone, Samsung, Lumia) so I'm not new at this.
Regards.

I think you might have bought bad quality screens. Have you bought them off the same seller? you might want to return them.From my experience,the M8 lcd digitizers are interchangeable across carriers and OS versions(win/Andro).
I have not had any experience with other variants like M8s etc but screen from verizon sprint att fido chatr windows android are interchangeable

bombo_b said:
I think you might have bought bad quality screens. Have you bought them off the same seller? you might want to return them.From my experience,the M8 lcd digitizers are interchangeable across carriers and OS versions(win/Andro).
I have not had any experience with other variants like M8s etc but screen from verizon sprint att fido chatr windows android are interchangeable
Click to expand...
Click to collapse
Thanks for your reply.
I purchased the screens new from two different suppliers. One was a chinese knock off, the other was a high quality OEM screen. Both were full LCD/touchscreen and front frame assemblies.
I can't believe that both are faulty. As an update, I bought a second hand screen from another Verizon WP M8, and it works perfectly. I'm going to purchase an android version M8 with damaged screen and see if either/both of the new ones work on that.

rikko40 said:
Thanks for your reply.
I purchased the screens new from two different suppliers. One was a chinese knock off, the other was a high quality OEM screen. Both were full LCD/touchscreen and front frame assemblies.
I can't believe that both are faulty. As an update, I bought a second hand screen from another Verizon WP M8, and it works perfectly. I'm going to purchase an android version M8 with damaged screen and see if either/both of the new ones work on that.
Click to expand...
Click to collapse
I replaced my M8's display twice. Bought them from Etradesupply.com. The parts that are rated S+ are original OEM parts direct from them. No third partyish crap going on.

AlvinPhilemon said:
I replaced my M8's display twice. Bought them from Etradesupply.com. The parts that are rated S+ are original OEM parts direct from them. No third partyish crap going on.
Click to expand...
Click to collapse
Thanks. I'll give them a try.

I have tried to install even original (stock) LCD from ANDROID phone to WINDOWS phone - it does not work.
But screen from WINDOWS phones works perfectly on any ANDROID phone.
I have an idea that maybe hard reset or flashing RUU will make it work, and I tried: after hard reset even native LCD stopped to work.
Friend, did you tried to flash phone with new screen installed?

I'm out. I'm done with Essential

Edit at end of post.
This all goes back to before I even ordered the phone. I wanted the grey one. I emailed twice about it. They kept telling me it will be released soon and to watch their social media accounts to find out when it will be released knowing full well they weren't releasing those. This was months ago and those additional colors are still not out. So that was deceit #1. My last phone was an S6. Its connector was so loose a charging cable wouldn't stay in. Coupled with a diminished battery capacity, I needed a phone and I didn't want another Samsung.
I decided to go ahead and order the black one. As soon as I completed the order, I got a message asking if I wanted to know when the phone is certified by Verizon. Wait, what? At no point was that knowledge made public before my purchase. Android Authority put something out the next day or so. That was deceit #2.
About that time, the bandwagon of bad reviews based solely on what the PH-1 didn't have as well as the crappy camera app hit the media. I don't consider any of those things essential to a phone. I actually thought it was good to omit them and I didn't really care about the camera app. I'll admit, I defended Essential...a lot. I'm eating crow right now.
It arrived and the first thing I noticed was how freaking slippery this thing was. Unless it was on a perfectly horizontal surface, this thing was sliding off.
The second thing was the rough, fine sandpaper like plastic around the screen. I don't like the feel, at all, of that plastic. More importantly, why wasn't the entire side titanium? That's what was advertised. All I heard about is how durable the ceramic and titanium combination was. The drop test animation on their website show there phone hitting at a perfectly perpendicular angle to the surface. That was deceit #3. More on that later.
I put in the Verizon sim from my S6 and saw that my phone now had half the reception of my S6...half. Sitting next to my wife with her S6, she's pulling 4G and in out of 3G and 1X. All the settings were correct according to Verizon. I am in a weak cell area, yes, but never dropped calls. Calling now is virtually impossible without calling over WiFi...which brings me to the next issue. I'm with Verizon, so natively I have no WiFi calling or visual voicemail and whatever other features Verizon has limited me from using. There's even less signal in my area with AT&T so I'm stuck with Verizon. Wonderful. With some help from an XDA member, I was able to get Hangouts set up for WiFi calling but now I'm using two dialers.
Why is the charger USB C? Why not USB to USB C like every charger I've had in the past? Are other companies doing this, too? I have only one cord that works with that charger and that's the one that came with the phone.
After one week, rub marks began to appear on the ceramic back of the phone. I ordered a skin to cover it up.
After 3 weeks, rub marks appeared on the screen! Listen, I am extremely anal about the care of my phones. No keys, no coins. The only thing that goes in my left front pants pocket, ever, is my phone. So, apparently cloth takes it's toll on this phone.
My phone was one of the ones with the cheap paper mesh over the ear speaker (really?). That thing is pretty much non-existent at this point. They wouldn't replace my phone for that like they did for everyone else before me but that's fine, they offered to repair it for free which I declined. I didn't want the hassle of being separated from the phone that long.
My phone freezes occasionally, like completely freezes, unable to even turn off the phone until it restarts itself after about 30 seconds or so.
The screen off wake up or whatever it's called never works when I pull my phone out of my pocket. I have to shake it to see the time - pointless, since, at that point, it's easier to just fingerprint unlock than to shake it.
Many screen touches don't register, this is probably the most annoying thing overall about this phone.
The camera is really laggy, but everybody knows that.
And then the thing happened, I dropped it. From pocket height, I dropped it and it hit on the Achilles heel of the phone, the edge of the screen. Remember that plastic? Well, that thin plastic curves up to the edge of the phone. It gets thinner and thinner towards that top corner of the screen and it doesn't protect anything, especially the weakest part of gorilla glass, the edge. It cracked the corner of the screen. If that edge is not protected that will be a deal breaker on all future phones. That edge was supposed to be covered with titanium, damnit.
It still works but it's an eyesore and every time I look at this phone, I feel taken. I feel like a fool for buying this phone. It is a very aesthetic but poorly designed cheap ass phone sold at a premium price. They literally cut corners on this build. They owe me some titanium and whole slew of accessories, btw, but they can keep it all. I'm not even going to buy another one for $450 which I think is the going price now.
Anyway, thanks for letting me rant. I was thinking maybe the Pixel 2, but it appears they have issues of their own....maybe a flip phone.
Edit 12/28/2017:
In order to get data working after being connected to any WiFi, a restart is required. After a restart, I'm connected to LTE+ or whatever is actually available. This is true every time after being connected to WiFi. Credit to another user in these forums.

The one I just got from best buy about 3 weeks ago is a very noticeable difference. I know what you mean and I also had 3 returns but the latest one after reading the comments on xda really led me to believe there is a bad batch. So before I left the store I inspected it and hand weighed it. Even asked the rep to hand weigh it and there was a difference. right now I have no problems to report and I'm quite happy.
Even the signal issue that is claimed I haven't experienced because it's on par with my m9 and assumably my x pure.
Honestly... I know your stuck with your rant... But give it the final xda try. Inspect it before leaving the store and you will notice the weight and the back is much less slippery.
Also... I recommend worth Ave group insurance. Had them for years, and it's 79 dollars for a year with 800 dollar coverage and 50 dollars deductible which is deducted from the 800 dollar claim

The charger is usb-c cause it uses usb-c power delivery, just like the pixel. That's the correct standard and can handle higher wattage.
The scratches on the back are the oleophobic coating, not the ceramic.
The gorilla glass 5 scratches just the same as other devices with that version of gorilla glass.
If you weren't happy with the device, return within the 15 return period. I did. You can always rebuy.
The reason Essential can't give a date for the other colors is because the manufacturing process for that ceramic is difficult. They're doing each color in batches because you can't make multiple colors of ceramic at once in one furnace. You didn't see Xiaomi making different colors of the mi mix. It was black and many months later the white. That's all, and they're a much larger company with more resources.
The phone has improved since launch. 1st production models seemed to have QC issues (one reason I returned mine)

I received mine on Tuesday from Amazon it took me all of about half and hour to figure its going back 15Dbm difference then my moto z force. Not acceptable.

The workmanship on my white one is stellar. Absolutely zero issues the connectivity is great better than any device I've ever had on Verizon. The cameras responsive works great I'm not a professional photographer, I don't need professional photographer level results, but I get very good pictures. Absolutely love this device and with the Incipio its running naked, no screen protector.
Sent from my PH-1 using Tapatalk

Honestly i was excited to get this phone i could get pass all of the small issues but then I noticed the following problems with the screen.
The screen is really slow to respond to touch input My pixel xl did not have this problem.
The display itself is an IPS display but this screen is the worst one i have seen perform on a phone there is a lot of ghosting (image blur on a moving object)
I compared it to a unit that was on display on a store and it had the same slow touch input and ghosting issues.
So the slow touch input affects the phone as to how fast you can type and switch apps etc. The phone does not respond to fast actions very well and sometimes misses touch inputs.
You can drag your finger on top of an app and swipe it left or right and you can see that the app will be way far back where your finger was a second ago. s8, pixel xl, note 5 dont have this problem (I own them) The display on this thing is disappointing and you can also observe horizontal lines on the display.
I think this phone would of been successful if they used an AMOLED display.
I would say that the display has very realistic colors but thats it.
Whats the point of a high end spec'd phone but has an underperforming display....

I'm the sort of person who's not the first in line to get anything. I wait for things to percolate and germinate and then make my move. I also usually wait until cases are available before buying.
Just recently got my PH-1, just over a week old and it's just great. Haven't even bothered with rooting or modding, just fine stock. Got a nice Tudia case from eBay and all's well.
Using it with Sprint, no problems or issues of any kind. Best activation process i've had in all my years with Sprint (considering the horror that i went through with the Nexus 6P).
I'm in. Very in with the PH-1.

So I get a lot of what your saying, I went the other and have learned to love my PH-1. In-Fact I will go as far to say it is my Favorite phone to carry all the way back to OG Moto Droid...
One comment about your rant though:
"Why is the charger USB C? Why not USB to USB C like every charger I've had in the past? Are other companies doing this, too? I have only one cord that works with that charger and that's the one that came with the phone. "
So many phones come C to C now. My desktop and laptop both even have a couple C ports. Spend the $3 on Amazon for a cable if you need one man, this is not a fault of Essential.

Here's what I got for USB to USB C
USB Type C Cable, Snowkids USB C Cable (USB 3.0)(2-PACK 6.6ft) Nylon Braided Fast Charger for Samsung Galaxy Note 8, LG V30 G6 G5 V20,Nintendo Switch,Galaxy S8 Plus,Google Pixel 2,HTC U11 Plus (Grey) https://www.amazon.com/dp/B01N5KL10L/ref=cm_sw_r_cp_apa_X8MdAb1EMKPS8
---------- Post added at 12:14 AM ---------- Previous post was at 12:11 AM ----------
LordLugard said:
I'm the sort of person who's not the first in line to get anything. I wait for things to percolate and germinate and then make my move. I also usually wait until cases are available before buying.
Just recently got my PH-1, just over a week old and it's just great. Haven't even bothered with rooting or modding, just fine stock. Got a nice Tudia case from eBay and all's well.
Using it with Sprint, no problems or issues of any kind. Best activation process i've had in all my years with Sprint (considering the horror that i went through with the Nexus 6P).
I'm in. Very in with the PH-1.
Click to expand...
Click to collapse
Lol we're about the same boat except my first phone didn't activate on sprint

bigmook said:
The workmanship on my white one is stellar. Absolutely zero issues the connectivity is great better than any device I've ever had on Verizon. The cameras responsive works great I'm not a professional photographer, I don't need professional photographer level results, but I get very good pictures. Absolutely love this device and with the Incipio its running naked, no screen protector.
Click to expand...
Click to collapse
You must be going solely based on signal bar icons. If you compared dBm readings, you'll see essential is significantly worse than whatever phone you last came from. Signal is definitely one of the weakest points of this phone.

No sir I am going by real world usage as compared to my Nexus 6p which was totally functional. I don't look settings I just use it if it works it works. And it works very well.
Sent from my PH-1 using Tapatalk

in case you did not know, they replace the phone for $200.

I got one from amazon for verizon and i havent had any signal issues. I am on Oreo beta now as well. As for the front screen i do have a slight knock in it as well not sure from what.. I did get the $13 tpu case off amazon and it does help quite a bit.. with handling it.
And I will prob be moving to the LG v30 when it comes available on amazon.. Since i can buy it try and if i dont like it return it with out being hit with stupid fee's
I wanted to pick up a oneplus 5T but people say oneplus doesnt support verizon..

Bye Felicia!

Titanium to the edge of the screen would break the screen if the phone got warm and then cooled down, since metal expands/contracts. So yea, dropping your phone on the edge is going to break the screen, but the alternative you're ranting about would cause the phone to break if you had it in your pocket and pulled it out in cold weather.
umx said:
I got one from amazon for verizon and i havent had any signal issues. I am on Oreo beta now as well. As for the front screen i do have a slight knock in it as well not sure from what.. I did get the $13 tpu case off amazon and it does help quite a bit.. with handling it.
And I will prob be moving to the LG v30 when it comes available on amazon.. Since i can buy it try and if i dont like it return it with out being hit with stupid fee's
I wanted to pick up a oneplus 5T but people say oneplus doesnt support verizon..
Click to expand...
Click to collapse
I've seen some folk on reddit that dropped their already activated Verizon SIM in the 5 and had it connect to LTE with VoLTE. So long as you don't *need* the CDMA to work, it should work. Just don't ask Verizon for any help.

Seamonkey79 said:
Titanium to the edge of the screen would break the screen if the phone got warm and then cooled down, since metal expands/contracts. So yea, dropping your phone on the edge is going to break the screen, but the alternative you're ranting about would cause the phone to break if you had it in your pocket and pulled it out in cold weather.
I've seen some folk on reddit that dropped their already activated Verizon SIM in the 5 and had it connect to LTE with VoLTE. So long as you don't *need* the CDMA to work, it should work. Just don't ask Verizon for any help.
Click to expand...
Click to collapse
As long as I get LTE and 4g thats all i care about.. verizon isnt of any help anyways lol..

umx said:
As long as I get LTE and 4g thats all i care about.. verizon isnt of any help anyways lol..
Click to expand...
Click to collapse
Most LTE phones should work on Verizon 'out of box', provided they have the antennas necessary. I know the OnePlus 5 was missing a couple of Verizon bands, but the majority of them were there.

Seamonkey79 said:
Most LTE phones should work on Verizon 'out of box', provided they have the antennas necessary. I know the OnePlus 5 was missing a couple of Verizon bands, but the majority of them were there.
Click to expand...
Click to collapse
yea ill have to give it a shot.. and see.. worst case ill grab a v30 used or wait to next round of phones.

Ok, the rest of your rant is pretty justified. I feel you. These are valid points. However, you just start bringing up random stuff that doesn't make any sense to a complaint about the phone
bL1X said:
I put in the Verizon sim from my S6 and saw that my phone now had half the reception of my S6...half. Sitting next to my wife with her S6, she's pulling 4G and in out of 3G and 1X. All the settings were correct according to Verizon. I am in a weak cell area, yes, but never dropped calls. Calling now is virtually impossible without calling over WiFi...which brings me to the next issue. I'm with Verizon, so natively I have no WiFi calling or visual voicemail and whatever other features Verizon has limited me from using. There's even less signal in my area with AT&T so I'm stuck with Verizon. Wonderful. With some help from an XDA member, I was able to get Hangouts set up for WiFi calling but now I'm using two dialers.
Click to expand...
Click to collapse
So, wifi calling doesn't work because Verizon hasn't properly provisioned it in their system? That is a problem with the phone?
It seems like it is a problem with Verizon, which you should be asking them to fix.
Just leave it at: The signal sucks. I am looking at this phone right now. Signal sucks. I agree.
The whole Verizon thing just seems like a weird complaint
Why is the charger USB C? Why not USB to USB C like every charger I've had in the past? Are other companies doing this, too? I have only one cord that works with that charger and that's the one that came with the phone.
Click to expand...
Click to collapse
Literally no phone with USB C comes with the type of charger you are discussing. ZERO.
USB C-USB C cables are capable of 3A
USB A-USB C is limited to 2.4A
All phones with USB C come with a USB C-USB C so that the phone will charge faster! Every single one since the Nexus 6p/5X
The screen off wake up or whatever it's called never works when I pull my phone out of my pocket. I have to shake it to see the time - pointless, since, at that point, it's easier to just fingerprint unlock than to shake it.
Click to expand...
Click to collapse
I have my old Nexus 5x sitting right here. I decided to run a little experiment.
The Nexus 5x was about as successful as the PH-1 at "wake up". It missed about 25% of the time.
This feature is notoriously iffy.
I mean, I get the rant. You seem upset. I understand.
Those three points just seem arbitrary and don't even reflect legitimate issues with the phone.

The essential phone is Verizon approved... Correct?
Sent from my PH-1 using Tapatalk

Is it worth buying over a display dead Oneplus 6?

Hello guys, I need some advice on purchasing Oneplus Nord. My apologies if I violate any community guidelines.
I own an oneplus 6 and its display got damaged. I own it since its launch and I am a heavy user and it has seen its fair share of wear and tear. I also have old moto g5s plus running custom rooms which I only use for android app development.
The new Oneplus Nord does look compelling for the price but in the market, I see realme phones with snapdragon 855 chipsets. I do rely on custom ROMs once the manufacturers update window passes but I am not a die-hard Rom hopper.
Please suggest me if it is a good idea to purchase the OnePlus Nord to use it for the next 2 to 3 years with stock OS and then use it for development purpose with a custom ROM.
OR should I just replace the Oneplus 6 screen and call it a day??
PS: I have never experience 90Hz screen refresh rate.
Thank you

How much would the screen repair cost you? I personally wouldn´t do it if it´s ~100$.
Is your OP6 still usable? Then why not use it for develpment and get a Nord. You can always mirror/stream the OP6 display onto your PC if it´s too damaged and use it that way.

i have a OP5 with display issue as well.. the original touch screen went unresponsive three months ago.. display was fine though.. i checked OP repair and they charged HK$23xx (around US$300) for replacing the touch screen, the motherboard and the battery, so basically everything except the frame.. i chose to replace with a 3rd party touch screen for HK$700 (around US$90).. it worked for 3 months and then the touch screen did not respond again.. now i understand why OP repair quoted to replace the motherboard as well as i think its not just the display part but also fault in the main component..
now im using this OP5 exactly as @Saiger mentioned, connecting it to PC via USB cable and control it from the PC..
had considered OP7 and OP8 but their prices are beyond my acceptable range.. kept an eye on Nord and now its finally announced.. the spec seems good (not top grade but good for my usage) and price is okay.. so i shall definitely get it in Aug when its available..
just wanna share my experience for your reference..

iamelton said:
i have a OP5 with display issue as well.. the original touch screen went unresponsive three months ago.. display was fine though.. i checked OP repair and they charged HK$23xx (around US$300) for replacing the touch screen, the motherboard and the battery, so basically everything except the frame.. i chose to replace with a 3rd party touch screen for HK$700 (around US$90).. it worked for 3 months and then the touch screen did not respond again.. now i understand why OP repair quoted to replace the motherboard as well as i think its not just the display part but also fault in the main component..
now im using this OP5 exactly as @Saiger mentioned, connecting it to PC via USB cable and control it from the PC..
had considered OP7 and OP8 but their prices are beyond my acceptable range.. kept an eye on Nord and now its finally announced.. the spec seems good (not top grade but good for my usage) and price is okay.. so i shall definitely get it in Aug when its available..
just wanna share my experience for your reference..
Click to expand...
Click to collapse
Yes, that is my fear also. I had a Micromax(Indian Phone Company) phone with dead display and after replacement, the touch went crazy. So I am afraid to repair my Oneplus 6.
Thankfully I will be giving interviews for some jobs soon. And in India OP will launch a 6/64 GB variant. Depending on my job I'll make the decision.
Thanks for replying.