Hi, i am in desperate need of a lcd display for a 7 pro but they are seriously hard to get hold of!
I have looked on ebay and theres only ones from HK or China and even then the sellers feedback on screens is poor!
I have phoned countless repair shops in the uk and only a couple claim to be able to get hold of the screen but then demand that they fix the phone themselves and a stupid fee and will not supply the screen to me.
one thing i have noticed it that the touch pro 2 and 7 pro screens look identical apart from the colour of the ribbon that connects them to the main cable that goes through the slide body.
there is no visual difference between the screens or connector cables other thab colour and they have the same specs also-
480 x 800 pixels, 3.6 inches and a 259 ppi pixel density
Does anyone know if they are actually interchangeable or not? i cant find a screen anywhere and my wife is not pleased with me right now as ive only just got the phone and a broke the lcd trying to remove the digitizer even though i was ultra carefull and used lots of heat, please can someone help!!!!
Thanks, Steve.
Hello! To most simply answer your question, no. The screens are very different despite looking similar. The old TP2 screen is not multitouch and WP7 requires this. Also, the old screen utilizes a stylus while the newer 7 pro screen doesn't even recognize that type of touch.
It is your phone after all, so if you would like to try this that's your choice. However its too much effort to affix the ribbon to the pcb to even make it worth it. My old TP2 has a cracked digitizer which I have a replacement for, but the ribbon is machine pressed onto the pcb and reattaching this connection would be very difficult without the type of heat/pressure used in the manufacturing of the phone.
If you decide to try it let us know the results!
I'm sorry, I just seen you said the lcd itself, I thought you were meaning the digitizer screens.
That being said, maybe the swap will work, as long as they hook up the same?
x_orange90_x said:
I'm sorry, I just seen you said the lcd itself, I thought you were meaning the digitizer screens.
That being said, maybe the swap will work, as long as they hook up the same?
Click to expand...
Click to collapse
i found a seller with genuine touch pro 2 screens who is willing to take it back if it does not work for me, i will let everyone know if it works!
I can confirm, the touch pro 2 screen does NOT work in the 7 pro, it is almost identical but the conector is at most 1mm wider than the 7 pro but its enough to stop if fitting into the socket
Back to the drawing board for me i guess.
steve_htc_wizard said:
I can confirm, the touch pro 2 screen does NOT work in the 7 pro, it is almost identical but the conector is at most 1mm wider than the 7 pro but its enough to stop if fitting into the socket
Back to the drawing board for me i guess.
Click to expand...
Click to collapse
not sure if you still need an LCD, or maybe you got a new phone by now. I found this if your still interested in getting it up and going again.
http://www.ebay.com/itm/271230982583
x_orange90_x said:
not sure if you still need an LCD, or maybe you got a new phone by now. I found this if your still interested in getting it up and going again.
http://www.ebay.com/itm/271230982583
Click to expand...
Click to collapse
not been on for a few days, thankyou for the link its still there and in europe!
I bought another 7 pro handset as i could not wait any longer, i had been forced back to my old Touch pro (raphael) and although not a bad phone and running a custom 6.5.3 rom , it just cant cope on the web anymore as all the standards have changed and nobody is supporting windows mobile anymore.
Its a shame cos windows mobile is by far a better operating system than windows phone, updated and running on better hardware it would have rocked.
even though i bought a new handset ive always intended on fixing the other one when i get the chance and have put a bid on that screen to remove the buy it now.
Fingers crossed that it dont go up in price, my wife will kill me if spend much more on these phones lol
once its fixed its going to go in its box and live in a safe place till ive worn out this new one, dont think i wll sell it, thanks for your help, you get a thanks meter point for this :good:
Steve.
You are welcome I was a little worried you might not get to the link fast enough but thankfully you did! I seen that and figured its a steal considering the lcd is nearly that price alone, plus all the work needed to change it. Good luck I hope you win it
Thanks geeze
x_orange90_x said:
You are welcome I was a little worried you might not get to the link fast enough but thankfully you did! I seen that and figured its a steal considering the lcd is nearly that price alone, plus all the work needed to change it. Good luck I hope you win it
Click to expand...
Click to collapse
hey orange, i won that screen, got it for the starting bid, its on its way here at the moment, there was a delay in paying for it as my card decided bit to work on pay pal grrrr but its all sorted now, just gotta wait.
thanks again.
Hey guys a little question I have my old galaxy tab 7.0 plus which Samsung wont repair no reason can i just buy a 7in screen and repair it my self since there are many screens here in Philippines
Sent from my GT-P6800 using XDA Premium 4 mobile app
captsingh787 said:
Hey guys a little question I have my old galaxy tab 7.0 plus which Samsung wont repair no reason can i just buy a 7in screen and repair it my self since there are many screens here in Philippines
Sent from my GT-P6800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
as long as you get the right screen, theres no reason why you cant do it yourself, just go slow, very slow, read tutorials and be very carefull of all cables and boards inside. if it its the glass digitizer that is broken and not the whole display, be very very carefull when removing it from the lcd as theres a big chance of breaking the lcd as its removed, heat to relax the glue is your friend! if the glass is shatterd, removing the glass bit by bit instead of trying to remove it all at once may proove easyer and less risky on the lcd.
Good luck, steve.
Look at this auction: http://www.ebay.pl/itm/HTC-7-pro-Arrive-T7576-LCD-Display-/141028832234?pt=UK_Replacement_Parts_Tools&hash=item20d5f933ea&_uhb=1 this is display for 7 Pro.
Related
I dropped my touch pro and cracked the screen in a few places. I think it works normally except for the screen, as it receives calls fine...
A new phone isn't in my budget right now. Does anyone know of a good place (hopefully in DC, MD or VA) that will supply or install a replacement touch screen?
(btw, no recent threads came up when I searched.)
Ebay!
Just looked, $30 including postage for a screen & digitiser if you are able to do it yourself.
How hard is it to replace a screen if it has surface damage? Is there anywhere i could find a walkthrough or help?
Shame man, its a tragedy of what happened to your phone...
Luckily its not too bad, and you may just be able to fix it. You can download the service manual for the phone here: http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
Just a note though, make sure you DO USE tweezers or something to get the speaker wires out of the way before snapping the enclosure back into position... I had to reopen the phone again, after powering it, to rejoin one of the little wires thats like a tenth of a millimeter thick DO NOT IGNORE ANYTHING THEY TELL YOU IN THE MANUAL. Oh, and what works well for the "plastic removal tool" is a cut out piece of plastic ice cream container. AGIAN, do not ignore anything in there... You are voiding the warranty permanently when you do it yourself (which you unfortunately have to).
Anyways, good luck!
I drop my phone also, but the screen didn't actually cracked! but I do have is problems with the screen in other ways! Sometimes I get a black screen when I turn on the phone and sometimes not, but when the screen turns on, it flickers a lot and have lines thru it. What suprises me is that sometimes I get perfect images on the screen (Which makes me think that the screen it's not damaged).
Any suggestion would be apreciated. Thanks!
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
a.mendoza said:
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
Click to expand...
Click to collapse
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
maxh said:
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
Click to expand...
Click to collapse
Thanks for the advice! I was thinking on that also and wanted to take my chances opening the phone (oh god!).
BTW, I saw the $30 LCD Screen+Digitizer combo on ebay that Beeble referred to, but I'm not sure if it fits on the fuze (my model). What have come to my mind it's to buy also the front camera of the phone (like a thread on the kaiser) to mod the cell, in case I need to buy the screen+digitizer. I've search all threads about this issue but nobody has done it because it was too expensive for the result; I believe with this price it's worth it right now!
solved
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
I used Diamod (!) LCD and Touch Pro digitiser. Works perfect.
Much more cheaper
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
-G-Rey--- said:
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
Click to expand...
Click to collapse
WOW! What a long way to get to the screen. Good luck for everyone who tries to dismount and mount the Raphael.
maxh said:
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
Click to expand...
Click to collapse
Thanks for the advise maxh,
I just wanted to let you know that a miracle just happened! my cellphone started to work just fine without even opening the phone! it has more than a week on this situation so I believe that it's exactly what you stated (the LCD conector became unseated or loose). Since it's still working, I have no need to open it! so I'll just wait until it becomes defective again and at that point just open it and tight up the LCD connector!
Anyway, I would love if somebody could make the mod that I was refereing to before (changing the screen of the fuze by the touch pro one) and see if it's possible to attach the front camera on the fuze.
Once again, thanks everybody for your opinions.
I got my new display+ digitizer on Ebay (65$) and replaced it, using the russian link mentioned above ( follow the exact procedure) , it took me 2 hours to do it, and after lot of patience it worked! My problem was the digitizer never worked fine, and after replaced it it worked like never before. If You are not familiar with repairs, it will be a mistake and waste of money to buy a display without digitizer. NOW, I have a small problem, my display has a NEW color, it's like color temp is WARM for this display, and COLD for my old display, AND COLOR level is lower, and the result is display without vivid colors, black like gray. Is there any way to change the DISPLAY color settings?
Hey guys, New to the HTC sensation threads (its my Girlfriends phone)
Got her this phone about 6 months ago - 1 week after having it she dropped it and broke the digitizer anyway i got that fixed at my local phone shop with aftermarket digitizer - it worked well but you could tell it was not genuine.
anyway the other week i dropped it and broke the lcd screen yet the digitizer is fine and the phone is still 100% useable - except the display looks awful.
Does anyone know if this is an easy fix, is it worth fixing myself or taking it to the phone shop - Im embarrassed to go back and explain how it has broke again lol.... But i need to get it fixed, Im so close to having my wang removed by my girlfriend.
I was wondering whether or not HTC themselves would repair it ? and maybe replace the digitizer too, I dont mind paying the extra £££ for genuine parts and to be fixed by genuine HTC repairmen..
Any ideas how i can get out this mess ??
sorry for the long post.
Thanks
Off course HTC will repair it, but it'll take longer and probably charge you a lot more than what you can it fixed for.
Out of curiosity do you/your girl not put the phone in a case or something?
nba1341 said:
Out of curiosity do you/your girl not put the phone in a case or something?
Click to expand...
Click to collapse
Haha, no i did not.. But as soon as i get it fixed im gunna invest in a bulletproof / bombproof carbon kevlar box and keep it locked inside it !!!
Was it bought through a carrier or sim free? Could always take it to your carrier and see what they suggest, although they're not normally the cheapest, but at least it should get done properly.
Yeah i got it through vodafone, I think i will give them a call and see what they say.
I was considering taking out insurance, then in a few days call them and tell them its broken, This is risky.... what do you think the odds are with me getting away with it ?
Do you think they would notice the aftermarket digitizer ? It is an exact replica with HTC on it....
these damn phones are so fragile.... I miss the old nokias
EDIT: Seen this and am tempted to get it and fix it myself..... http://www.lingosbox.com/product_info.php?language=en¤cy=GBP&products_id=4769
opinions ??
No, you won't get away with it, and it's dishonest, anyway. Don't make yourself a criminal over a cell phone.
Now, that being said, check Ebay. There are lots of vendors in the UK and elsewhere (lots here in the US) that sell replacement screen kits, many of which include instructions and tools.
If you're handy with small tools and careful, you can do this yourself for a fraction of what it will cost you to have it done. I learned this when my kid's iPod battery died some years ago. They're not user replaceable, and Apple wanted some outrageous amount to do it, plus you had to send it away. I found a guy on line that sold batteries with tools and directions, and in 20 minutes, she was good as new.
Pays to do it yourself.
azzledazzle said:
Yeah i got it through vodafone, I think i will give them a call and see what they say.
I was considering taking out insurance, then in a few days call them and tell them its broken, This is risky.... what do you think the odds are with me getting away with it ?
Do you think they would notice the aftermarket digitizer ? It is an exact replica with HTC on it....
these damn phones are so fragile.... I miss the old nokias
EDIT: Seen this and am tempted to get it and fix it myself..... http://www.lingosbox.com/product_info.php?language=en¤cy=GBP&products_id=4769
opinions ??
Click to expand...
Click to collapse
joe.attaboy said:
No, you won't get away with it, and it's dishonest, anyway. Don't make yourself a criminal over a cell phone.
Now, that being said, check Ebay. There are lots of vendors in the UK and elsewhere (lots here in the US) that sell replacement screen kits, many of which include instructions and tools.
If you're handy with small tools and careful, you can do this yourself for a fraction of what it will cost you to have it done. I learned this when my kid's iPod battery died some years ago. They're not user replaceable, and Apple wanted some outrageous amount to do it, plus you had to send it away. I found a guy on line that sold batteries with tools and directions, and in 20 minutes, she was good as new.
Pays to do it yourself.
Click to expand...
Click to collapse
I totally agree with you !! i do not want to result to fraudulent behaviour... BUT, i dont want to pay approx £80 for parts and make the whole situation worse by possibly making more damage.
BUT i also dont want to pay approx £150 - £200 thinking i could of fixed it for much less by doing it myself.
I am good with stuff like that and am very gentle and careful..... but i dont believe in myself lol
I recently replaced mine. Its not too terribly hard to do. But you have to get it just right. Currently the digitizer is a bit slow and unresponsive at time but I think i didnt get it in there completely right. So I'm going to dissaimble is again today and get it suck in better and see of that helps
Sent from my cm_tenderloin using Tapatalk
Since the Sensation screen is made by two different manufactures is it possible to mix and match them or do you have to replace the screen with the same one with phone came with? I have a Sensation that needs a LCD that I have not taken apart yet. Im wanting to get the better screen but im not sure if I can just put the better screen in it if thats not what it came with in the first place.
silentsnow31802 said:
Since the Sensation screen is made by two different manufactures is it possible to mix and match them or do you have to replace the screen with the same one with phone came with? I have a Sensation that needs a LCD that I have not taken apart yet. Im wanting to get the better screen but im not sure if I can just put the better screen in it if thats not what it came with in the first place.
Click to expand...
Click to collapse
Well it's much better to replace it with the same display just to be sure it's going to work. There's also a side by side comparison of the Sharp and Acer (AUO) displays
That said, you can check what panel you have using the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1131592
dgenx210 said:
Well it's much better to replace it with the same display just to be sure it's going to work. There's also a side by side comparison of the Sharp and Acer (AUO) displays
That said, you can check what panel you have using the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1131592
Click to expand...
Click to collapse
The display on my phone is completely destroyed so I cant use terminal emulator to look it up :-(
EDIT: I was doing some research on the part numbers on the back of my screen and I found this thread...
http://pdaclub.pl/forum/sensation/dziwny-kurz-pod-dotykiem/
Post #8 has my same part number as mine (74h02057-00M) listed and in the same sentence AUO. So I have to assume it had the AUO screen which kinda sucks.
silentsnow31802 said:
The display on my phone is completely destroyed so I cant use terminal emulator to look it up :-(
EDIT: I was doing some research on the part numbers on the back of my screen and I found this thread...
http://pdaclub.pl/forum/sensation/dziwny-kurz-pod-dotykiem/
Post #8 has my same part number as mine (74h02057-00M) listed and in the same sentence AUO. So I have to assume it had the AUO screen which kinda sucks.
Click to expand...
Click to collapse
If somehow you can get it to get recognized by adb, you can issue the dmesg from there by using 'adb shell dmesg'
Sent from my HTC Z715e
dgenx210 said:
If somehow you can get it to get recognized by adb, you can issue the dmesg from there by using 'adb shell dmesg'
Sent from my HTC Z715e
Click to expand...
Click to collapse
I dont even have a battery for it at the moment. When the battery arrives ill check it out. I have a feeling im not going to be able to get ADB working though.
I bought this!
http://www.ebay.com/itm/260959508044?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Ill let you all know how it turns out....
Well I got the screen and digitizer from the link above today. Installed it and its perfectly fine. No lag anywhere, registers touch like the stock one did. The LCD panel seems to be the same quality as the AUO panel but thats fine with me since im pretty sure this phone came with the AUO from the factory. If you do decide to replace your screen and digitizer i suggest getting them as separate pieces. Having them attached to each other made it sorta difficult to get back together cleanly.
silentsnow31802 said:
Well I got the screen and digitizer from the link above today. Installed it and its perfectly fine. No lag anywhere, registers touch like the stock one did. The LCD panel seems to be the same quality as the AUO panel but thats fine with me since im pretty sure this phone came with the AUO from the factory. If you do decide to replace your screen and digitizer i suggest getting them as separate pieces. Having them attached to each other made it sorta difficult to get back together cleanly.
Click to expand...
Click to collapse
Glad you finally got it sorted. Welcome back to you then
azzledazzle said:
Hey guys, New to the HTC sensation threads (its my Girlfriends phone)
Got her this phone about 6 months ago - 1 week after having it she dropped it and broke the digitizer anyway i got that fixed at my local phone shop with aftermarket digitizer - it worked well but you could tell it was not genuine.
anyway the other week i dropped it and broke the lcd screen yet the digitizer is fine and the phone is still 100% useable - except the display looks awful.
Does anyone know if this is an easy fix, is it worth fixing myself or taking it to the phone shop - Im embarrassed to go back and explain how it has broke again lol.... But i need to get it fixed, Im so close to having my wang removed by my girlfriend.
I was wondering whether or not HTC themselves would repair it ? and maybe replace the digitizer too, I dont mind paying the extra £££ for genuine parts and to be fixed by genuine HTC repairmen..
Any ideas how i can get out this mess ??
sorry for the long post.
Thanks
Click to expand...
Click to collapse
You must of dropped that phone from ten stories lol.. I rarely seen any lcd screen break or crack on the sensation. Being its made from aluminum and the screen is Gorilla Glass.. its tough stuff.. but sorry to hear that
mckellick said:
You must of dropped that phone from ten stories lol.. I rarely seen any lcd screen break or crack on the sensation. Being its made from aluminum and the screen is Gorilla Glass.. its tough stuff.. but sorry to hear that
Click to expand...
Click to collapse
well the day after i got it fixed i knocked it off the side onto tiled flooring, it cracked the lcd but not the digitizer... so weird lol
anyway since then i have had some signal issues with my provider, they have established that the handset is faulty, they are collecting it to repair it.
I still havent had the screen fixed so im just going to see what happens when they go to repair it, Maybe they will think they broke the screen and fix it before returning it to me. Or maybe they wont.... if thats the case i will argue with them that it was fine before they took it away from me
after all, they must have 100's of these phones in boxes gathering dust in their warehouse(s) so a little arguing and im sure i will get it fixed / replaced.
Shhhhh Moms the word !!!
azzledazzle said:
well the day after i got it fixed i knocked it off the side onto tiled flooring, it cracked the lcd but not the digitizer... so weird lol
anyway since then i have had some signal issues with my provider, they have established that the handset is faulty, they are collecting it to repair it.
I still havent had the screen fixed so im just going to see what happens when they go to repair it, Maybe they will think they broke the screen and fix it before returning it to me. Or maybe they wont.... if thats the case i will argue with them that it was fine before they took it away from me
after all, they must have 100's of these phones in boxes gathering dust in their warehouse(s) so a little arguing and im sure i will get it fixed / replaced.
Shhhhh Moms the word !!!
Click to expand...
Click to collapse
Lol yeah I bet they do..but most of the insurance phones you get after your device breaks are refurbished. Cheap beat up and abused.. then recycled.. lol that sounded like a lifetime channel movie. Well I hope your back up and running again..and how'd that tile doing? Cheers mate
Sent from Xparent Cyan Tapatalk HTC Sensation 4G with Beats and a kickass Rom
Hi everybody,
today ain't a good day for me.
My phone just smashed accidentally onto the road, after it had slipped from my hands. I was on the second floor (about 6 meter).
SBAM.
The impact was terrible, as you can see in the photos.
The "SAMSUNG" sign was completely turned into smithereens, and the fragments of glass were arrived up to the mainboard.
Despite that, I am trying to repair it.
I have just disassembled the entire device and I am planning to buy the front panel (+ lcd).
The question is: how can I know if the device still works ? Any idea?
What would you suggest?
I suggest you save money for a new phone..
You post make me sad
I don't believe, that you will find somebody that would be brave to check if this stuff still work. As you have on above post, the cheaper will be to buy new one... :fingers-crossed:
thank you all.
ARGH...I know, it's a pity, this wasn't supposed to happen
I'll save money for a new phone, yeah. I believe I don't have other choises (buying a new lcd is too expensive).
Thank you again, fellows!
well damn......that makes me sad and I have to say i dropped mine a lot of times,i have even trown it when i was angry but i can say that a few side scratches and back case scratched is all that's on it...lucky I used my momax case i guess.still i don't recommend it if you guys want to keep your back phone case free of scratches
i think is cheaper to buy a new smartphone than to repair and/or replace the screen
so sad:crying:
Bury him
Sent from my GT-I9000
This is the end for phone, better to save some money and buy something like galaxy nexus.
o_vdx said:
This is the end for phone, better to save some money and buy something like galaxy nexus.
Click to expand...
Click to collapse
+1
the screen will cost quite abit if im not mistaken. not worth the trouble as well. just get a new phone
Also, are you sure that the screen is the only thing that's broken? A drop from that height is more than enough to break the motherboard.
Sent from my GT-I9000 using Tapatalk 2
http://dx.com/p/genuine-samsung-i9000-repair-part-replacement-lcd-screen-module-black-151512?item=28
90 dollar for a replacement screen. But I guess that's just the front glass, you also broke the back.
Ye, a galaxy nexus seems fine, or maybe a motorola defy+ if you want something cheaper, it's just 200 now, almost the same specs as the galaxy s and it's meant for heavy use as you still see the screws...Seeing the damage you can cause, it's probably fit for you.
hello all looked every where seen similar ? but know answers any where .....have mt4gs that wont turn on just vibrates once was having problems with screen stuff looked distorted rainbow colored or screen not responding would have play with phone like slide keyboard in and out to get working again .....couldnt get to work pulled out battery put back in wouldnt start up.......same thing happen to the one before that similar prob still have it does same thing vibrates once........from what i gather from other posts is it might be flex cable have it apart flex cable looks fine ...would i be able to see if flex cable is messed up......... could it just be something came loose.......these are both factory oem no mods ...
If it's still under any kind of warranty I'd send it back with a note to quit returning the same phone to you. If you CAN send it, put a small indelible mark under the battery so you can check. If it's NOT covered you could theoretically fix it yourself if you're "electronics repair" inclined but it's not for the faint of heart....i.e., not easy.
If they try to SELL you another, you can get them on Ebay for half of what they'll try to sell you one for. For what they'll try to sell you one for, you can buy a Nexus 4 from google that's unlocked.....with enough change to take your GF out for a nice meal. A REALLY nice meal.
no warranty , not new to electronic repair or modding ....have two of these phone dont want to throw them out ..especially if it only needs and 18 dollar flex cable ...which would be cheaper than buying any used phone....... trying to find some info first so i dont waste money on flex cable for no reason ...ps phone is totally apart..........i think phone is turning on but nothing happens with screen and screen was buuging out when stopped working both times on both phones ..... any ideas thanx
Look at all the videos first.....
docflipside said:
no warranty , not new to electronic repair or modding ....have two of these phone dont want to throw them out ..especially if it only needs and 18 dollar flex cable ...which would be cheaper than buying any used phone....... trying to find some info first so i dont waste money on flex cable for no reason ...ps phone is totally apart..........i think phone is turning on but nothing happens with screen and screen was buuging out when stopped working both times on both phones ..... any ideas thanx
Click to expand...
Click to collapse
I just rebuilt my Slide (bought a new one that had a bad M/B on eBay for $65)--I tried to replace the digitizer & ended up breaking the LCD screen...The flex cable is between the LCD & the screen back mount....so it's not the easiest job.......Do yourself a favor & check out all the video on youtube first.
not a problem ..phones apart ...got skillz..... just looking for info ....i can take apart and put back together just about anything thats not the problem.ive done digi's ,broken screens,flex cables, power and volume buttons............ ive heard of this problem before just want to make sure i have the right solution ...so i dont buy the wrong part thank you
ps ...please no more posts about how hard it is.....
He does have a point, this phone is a pain in the ass compared to most, I too have disassembled many phones used to have a side business repair phones, and this was is possibly the biggest pain when it comes to how much sticky is used.
Anyway yeah it sounds like the main flex cable and that's where I would start.
Sent from my Nexus 7 using xda premium
So end result fixed first one....installed new main flex cable.....and tested it powered up and works fine just have to go back and screw her all together...was pain in the ass at the point where you need to separate lcd from slide housing but well worth will do another one tomorrow ....always first ones a ***** but not as hard as made to seem ......if any one needs help get at me will give pointers. will update again tomorrow
if any one has mt4gs and vibrates once and screen does not turn on its good bet its the main flex cable
same issue....
docflipside said:
So end result fixed first one....installed new main flex cable.....and tested it powered up and works fine just have to go back and screw her all together...was pain in the ass at the point where you need to separate lcd from slide housing but well worth will do another one tomorrow ....always first ones a ***** but not as hard as made to seem ......if any one needs help get at me will give pointers. will update again tomorrow
if any one has mt4gs and vibrates once and screen does not turn on its good bet its the main flex cable
Click to expand...
Click to collapse
i replaced the digitizer because it was cracked, in the process i broke the lcd, and tore the flex cable a little. i replaced both of those and now i cannot get the screen to turn on. if u or anyone else have any ideas that would be awsome! thanks in advance
p.s i have the htc mytouch 4g slide
There are multiple screen options for this phone, they all fit but aren't interchangeable, make sure your new one is made by the same company as old one
Sent from my Nexus 4 using xda premium
demkantor said:
There are multiple screen options for this phone, they all fit but aren't interchangeable, make sure your new one is made by the same company as old one
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
the phone was givin to me and i ordered the part on ebay it came from china. the package says. LH00042 LCD DISPLAY TOUCH SCREEN FOR MYTOUCH 4G. how would i know if it is the right part?
There are a few ways, usually the manufacturer is stickered on the back or product number. If you can't find this there is a line indented across the back of one and not the others
Also read this
http://forum.xda-developers.com/showthread.php?p=33221940
Sent from my Nexus 4 using xda premium
jayj4ysmith said:
the phone was givin to me and i ordered the part on ebay it came from china. the package says. LH00042 LCD DISPLAY TOUCH SCREEN FOR MYTOUCH 4G. how would i know if it is the right part?
Click to expand...
Click to collapse
This forum is dedicated to the MT4GS. Your description indicates the MT4G. Different devices.
Hastily spouted for your befuddlement
It started out simple. At first, the screen would cut off when I closed the keyboard sometimes...and then all the time. Next, the touch screen stopped working. Afterwards, the screen would freeze occasionally. Now, I can't see the screen at all.
I'm not ready to give up on this phone yet. I'm just not sure if it's a digitizer and sensor, or the flex cable issue. Does anybody have a clue?
90% need a new flex, be sure to get one with the speaker soldered on to make life easier and take your time reading before disassembly, lots o sticky stuff there
Sent from my Nexus 4 using XDA Premium 4 mobile app
If both the LCD and digitizer are having problems (with no signs of external or water damage), I'd suspect the flex cable as well.
Thanks!
I thought so, but I was in denial. I've only ever replaced digitizers, so I was hoping I just had to do something like that again.
By the way demkantor, what's the other 10%?
9% digitizer going bad and then soon after LCD, 1% software/firmware issue 90% get a new flex. So if it were me id buy the flex, or at least open it up and have a peek around
Sent from my Nexus 4 using XDA Premium 4 mobile app
Changed my flex two times by now, first time lcd showed color noise, second time touch died.
First time there were rips on the flex, second time - nothing particular.
demkantor said:
90% need a new flex, be sure to get one with the speaker soldered on to make life easier and take your time reading before disassembly, lots o sticky stuff there
Click to expand...
Click to collapse
My MT4GS has just gone blank after 3 years of continuous use. Screen went random colour pattern, then totally black, though phone is still working fine behind it.
I've done a search, but places like http://www.etradesupply.com/htc/android-models/htc-mytouch-4g-slide.html suggest there are two - a motherboard flex and a slide rail flex that look very similar but are two different prices. I'm a long way from USA, so spares take a long time to ship and are expensive.Can anyone recommend a supplier/specification so I get the right one? Help much appreciated. Thanks.
In the link you sent those are one in the same, can't say why the prices differ but one may have speaker and one not, I'm on mobile so its hard to zoom in and tell.
As for supplier I'm in the us and have just purchased from random eBay people before so I can't say what's best for you
Also note it is possible you're LCD is bad (but bless likely the cause) if you are to get one of these know which one you have first (there are a couple out there and aren't interchangeable)
demkantor said:
In the link you sent those are one in the same, can't say why the prices differ but one may have speaker and one not, I'm on mobile so its hard to zoom in and tell.
As for supplier I'm in the us and have just purchased from random eBay people before so I can't say what's best for you
Also note it is possible you're LCD is bad (but bless likely the cause) if you are to get one of these know which one you have first (there are a couple out there and aren't interchangeable)
Click to expand...
Click to collapse
Thanks - reading other posts on other threads (inlcuding one guy who posted a picture of exactly the last thing I saw on my screen before it went black (-http://forum.xda-developers.com/showthread.php?t=2092608)) seems to point to the flex. That post also has a link to an ebay sale, but the picture has been taken down so I've only got the name to go on. And of course that doesn't match what I can but other places so I'm just guessing at the moment..
Is it the main motherboard flex? Perhaps I'll have to strip the phone at the weekend and see if I can work it out... Oh well, another thing to add to the To-Do list. No wait, that's on my phone and I can't get at it!