Hello there
Today i finally wanted to start my sony xz premium again after having trouble getting it charging, possible usb c port damaged.
I got it charging for 20 minutes and was going to check how much it charged
When I saw the phone I noticed the green LED was on so I assumed it was fully Charged.
After trying to start it up I didnt do anything no vibration no Sony screen.
After reading how to force reboot it I tried that and it wont do anything.
Before I try a hard reset I wanted to ask if someone had the same problem or any idea how to get it running again?
(Currently it is in a salt/Rice bath cause im assuming liquid inside)
Update after letting it in the salt/Rice both for 2 hours the green Light dissapeared
But now everytime I try to Charge it,it stays on the charging picture but without any prozentuale showing.
After 5 min it will try to start but keeps getting stuck at the Sony Logo.
I got it charging with an 0% Indicator so probably will let it in the salt/Rice bath longer
Related
Hi Guys,
Does anyone have an Idea what fast blinking amber light means on DS?
My battery was low around 2% and I connected it to the stock charger and started watching a movie, after 10 mins or so my phone switched off and amber colored light started to flash, I am not able to switch it on now and after 30 mins or so even the blinking light went off.
Had Aplha CM10 ROM flashed and was working normally till now keeping my fingers crossed that it is not bricked. Please tell me it is not:crying:
EDIT:
Solved: Finally revived my phone by directly charging the battery from the USB port of my laptop. Seems the battery went too flat to charge itself in the phone.
mohitsapru said:
Hi Guys,
Does anyone have an Idea what fast blinking amber light means on DS?
My battery was low around 2% and I connected it to the stock charger and started watching a movie, after 10 mins or so my phone switched off and amber colored light started to flash, I am not able to switch it on now and after 30 mins or so even the blinking light went off.
Had Aplha CM10 ROM flashed and was working normally till now keeping my fingers crossed that it is not bricked. Please tell me it is not:crying:
Click to expand...
Click to collapse
Did it start charging when you connected the charger? when the desire S has no battery at all, and you connect the power, the light blinks, meaning that it hasn't got enough power to boot
So just make sure the charger works and leave it charging for a couple of minutes untill you get the classic charging LED on, and then try to boot again
TatoValverde said:
Did it start charging when you connected the charger? when the desire S has no battery at all, and you connect the power, the light blinks, meaning that it hasn't got enough power to boot
So just make sure the charger works and leave it charging for a couple of minutes untill you get the classic charging LED on, and then try to boot again
Click to expand...
Click to collapse
Thanks TataoValverde, so I guess it is not bricked. I had left the phone connected to the charger overnight but still it doesn't boot so it means it is not charging. Now nothing happens not even blinking light
So is there anyway i can revive it??
Make sure the battery is making connection - use a piece of paper to hold it firmly in place if necessary.
Try a different charger - any USB one should be fine.
Or buy a new battery as its much cheaper than a new phone.
If the charging circuitry on the phone is screwed then there is nothing you can really do unless you fancy changing the main board.
Hello Everyone, I really need assistants with my phone, i been using my Sony Erricson Xperia for awhile now and one day, i dropped my phone and the glass was damaged, not the lcd, just the glass, i checked everything and all was fine, but then one hour after that, my phone wont turn on, when i try to boot it up, it just keeps flashing red light, when i plugged it in the charger, it would just keep flashing red, but sometimes, when i just leave it to charge, it sometimes stop blinking and and is just red, the light is'nt blinking, it just is reddd.... and when i try to boot it, it shows a giant lightning bolt in the middle of a battery icon, then i knew it was charging, when i boot it up, it can but the battery 0% and i leave it to charge, but it never does charge, i left it for 5 hrs and is still 0% Can someone please help me, i don't want to buy a new phone, because i do not have enough money, so someone please help me
P.S The red light is above the charge port
Hello everyone!
So i'm experiencing some weird glitches/bugs on my phones battery which makes it unusable,I believe this was caused by my corrupted sd card,but not sure
So:
-I can't use the device without the charger,if I disconnect it it will immediately shut down
-When I connect it to the charger it starts flashing red light just like the sudden death syndrome, but now it even flashes the Sony logo with itself like it tries to boot up but has not enough battery left,even when I leave it charge for hours it will still show the white battery icon.After some time it will act like its not charging,no flash,not trying to boot.
-Somehow i managed to turn it on by messing around with the Vol up+Power combo,successfuly charging starts at 0% goes up to about 12% and after it reaches it, the indicator shows no charge and 99% of capacity(And drains slowly,right now I'm using it and it is at 98%).But as I said I can't use it without charger so it died again when I disconnected charger .
I Believe a few M2 users (or even other xperia users even) having this problem too,I also did not root it,it is under warranty (I will take it to repair if we can't fix this).
Update:
The phone started charging after the 12-99% glitch,I left it to charge for about 1-2 hours and the led started glowing green and the indicator on the upper right corner showed 100%,I can finally use it without charger but it turns off by itself if I'm not using it for about 10 minutes.
Not heard of it before, I'd say if it's stock and still covered by the warranty. Get it looked at. Have you tried doing a software repair via Sony's PCC it may help of you haven't tried it and it's the first thing Sony will tell you try.
D2303,18.3.1.C.1.15 kk, deodexed, debloated, rooted, philz touch recovery, bravia engine 2+x-reality+z3 super vivid, viper audio, xposed mods.
Thanks I will try it and post it if I get results,I believe that some people having this problem, since its fully stock.My friend who works for a Samsung service says it might be an issue with that thing (forgot its name) that tells the processor the battery percentage,it might be telling it it is on 0%
Was accessing dual recovery to wipe for a clean slate and it had a sudden death. The charging LED was no longer lit. Left the phone alone for about 2 weeks to let it drain but no response. Decided to order another battery for testing thinking it may have been bad, still no response. What I did notice is that if the battery is removed and the charger is connected, the LED blinks red constantly. However, if I were to attach the battery connector the LED will stop blinking after a few seconds. Is this an issue with the motherboard itself or can there something be done to bring it back to life?
*Update*
Let it charge for a couple of hours. Still not turning on but getting some response at least. The phone will now vibrate in sets of 3's if I hold down Power and Volume +. When trying to charge, the red LED will come on for 5 seconds then off every 5 seconds. When connected to the PC, it shows as unidentified USB, but the sound of it being disconnected is constantly going off. Not sure if anyone knows how I should proceed from here...
Hi
Cruxnik02 said:
Was accessing dual recovery to wipe for a clean slate and it had a sudden death. The charging LED was no longer lit. Left the phone alone for about 2 weeks to let it drain but no response. Decided to order another battery for testing thinking it may have been bad, still no response. What I did notice is that if the battery is removed and the charger is connected, the LED blinks red constantly. However, if I were to attach the battery connector the LED will stop blinking after a few seconds. Is this an issue with the motherboard itself or can there something be done to bring it back to life?
*Update*
Let it charge for a couple of hours. Still not turning on but getting some response at least. The phone will now vibrate in sets of 3's if I hold down Power and Volume +. When trying to charge, the red LED will come on for 5 seconds then off every 5 seconds. When connected to the PC, it shows as unidentified USB, but the sound of it being disconnected is constantly going off. Not sure if anyone knows how I should proceed from here...
Click to expand...
Click to collapse
Hi my phone is a D6603 and i was having a very and inusual problem like you Sudden death with some response vibrating in sets of 3's. My problem was resolve when i remove the sim then press the reset button 2 times in a row but slowly and the phone was starting again
I dont remember if it was or not conected try both ways
Back up your files and start working to keep it warm and dry, remember that it can be water damage. I downloaded minergate and began to mine in easy difficulty so that it would not become slow, but at the same time to keep it warm. It is only to dry if it was damaged by water, I do not recommend anyone to mine with a smartphone xD
A little bit of salt water splashed on the phone, cleaned it and kept it somewhere safe... when i was going home, i played music and texted for a while, it showed an error "An exception occurred during reboot......." I noticed an abnormality in the led light when i plugged it to charge... unplugged it, switched it off... and put inside rice till this morning... i charged this morning for some minutes, led light was normal, but still showed the same exception error. i switched it off to charge... it came on itself. i switched it off again... now it wont boot up, its freezes at the gionee logo... and when i try to charge... it's stuck at the lightning charging logo that even if i remove the charger it doesn't go off....
pls any professional who has come across this issue before should help.... don't know if its hardware or software problem