Greetings. I am the owner of a FYT UIS 7862 device. I have now done all the workarounds regarding the poor microphone quality during a call via Bluetooth.
I have connected an external microphone and disabled the internal microphone (via adhesive tape on the two contacts).
Here is the external microphone: https://m.de.aliexpress.com/item/1005001585070997.html?gatewayAdapt=Pc2Msite
Then I reflashed the firmware with the config.txt and this content:
persist.sys.zlink.mic.vol=9.9
persist.audio.mic.senstivity=1
persist.btmic.gain=10
persist.btspk.gain=7
Nevertheless, the call quality is really extremely poor. Then I installed a recorder app and recorded my voice. The test showed a clear sound image, it really sounded very good. But as soon as you make a call via Bluetooth, the quality is very poor.
Does anyone else have an idea what I could do? Thank you guys.
I had the same issue with Mekede M300S FYT116. This extra content is not valid for this unit, flash back the original config.txt and try.
The same for me, anyone has solution on this?
IMHO : Change the microphone !!!
I think I tested about 15 microphones (recovered from various devices) until I found one that works perfectly.
fratellos said:
IMHO : Change the microphone !!!
I think I tested about 15 microphones (recovered from various devices) until I found one that works perfectly.
Click to expand...
Click to collapse
I have now ordered a Sony XA-MC10. Will report on Monday whether it works. If Sony is no good, what then?
I also ordered an expensive Panasonic microphone. But, unfortunately, I was not satisfied with him; also by testing several microphones I solved the problem. The "winning" microphone is a no-name.I don't know exactly, but it could come from a mobile headset...
I connected the Sony microphone today and what can I say: it works perfectly. Now everyone can hear me clearly and understandably. By the way, I paid 25€ for the Sony XA-MC10 new (on eBay) and can highly recommend it.
I'm glad you've sorted it out. Can I make you a question about your bluetooth connection? I also have a FYT 7862 and calls occurs without problem, but regarding the bluetooth connection: does your radio connects to your phone as soon as your get inside your car or do you have to connect it manually?
For me, the smartphone connects immediately with Bluetooth of the headunit. It takes one second.
But the headunit always connects automatically to the last Bluetooth connection. If I was connected and then my wife drives the car, she has to connect manually. The same then when I drive again afterwards.
Solvin said:
For me, the smartphone connects immediately with Bluetooth of the headunit. It takes one second.
But the headunit always connects automatically to the last Bluetooth connection. If I was connected and then my wife drives the car, she has to connect manually. The same then when I drive again afterwards.
Click to expand...
Click to collapse
Thank you for replying. Ok, so my unit does exactly the same but it doesn´t keep "My Favorites" on the main screen, it wipes it all, through the change. Does yours keep the "favorites" of each of one connections?
Once again regarding the Bluetooth connection: I put a button on the home screen of my wife's smartphone and mine. You click this once briefly and it connects immediately with the head unit, should it not happen automatically. This saves a few annoying clicks on the smartphone. You can easily do this via Macrodroid.
Regarding the favorites: No favorites are deleted, everyone has his own. I do not have this bug.
Thanks for that tip. In fact it saves a bunch of time! I'll see with the developer why my favorites get wiped.
Macrodroid is a powerfull one.
Solvin said:
I connected the Sony microphone today and what can I say: it works perfectly. Now everyone can hear me clearly and understandably. By the way, I paid 25€ for the Sony XA-MC10 new (on eBay) and can highly recommend it.
Click to expand...
Click to collapse
I had issues with call quality and tried the suggested Sony XA-MC10 microphone.. Confirmed, people can now hear what I am saying. Thanks a lot.
pdedinski said:
I had issues with call quality and tried the suggested Sony XA-MC10 microphone.. Confirmed, people can now hear what I am saying. Thanks a lot.
Click to expand...
Click to collapse
hi, did you replace the microphone or did you also disable the internal microphone.
Pino1966 said:
hi, did you replace the microphone or did you also disable the internal microphone.
Click to expand...
Click to collapse
I have replaced the microphone. Also my head-unit had a setting in its Factory Settings an option to choose internal or external microphone. I Opted for an external one there. But even with this setting with the included microphone and one other, the other party in the call could barely understand what I was saying. Since I have installed the Sony XA-MC10, I can have a normal call. Yes, people say there is interference and noises while driving, but the call apparently is clear enough. Maybe it is worth mentioning previous two microphones were center windshield close to rear-view mirror. This one is installed on the left-side roof-support (or whatever it is called), a bit closer to me.
Solvin said:
25€ for the Sony XA-MC10 new
Click to expand...
Click to collapse
Same here, it's a good microphone. My unit doesn't have an internal microphone so no interference issues.
The only issue left is a bit annoying still: The other person hears an echo of its own voice, I guess my unit picks it up from the speakers and transmits it back to the other person - the echo stops once I mute the microphone.
My voice is clearly heard (unless I mute of course).
Must be software related, because the issue doesn't exist in calls using Microsoft Teams and the like (installed on the unit and using the same microphone and speakers).
Solvin said:
I connected the Sony microphone today and what can I say: it works perfectly. Now everyone can hear me clearly and understandably. By the way, I paid 25€ for the Sony XA-MC10 new (on eBay) and can highly recommend it.
Click to expand...
Click to collapse
Thanks for providing the solution with the sony microphone, but I wanted to ask you about the most recommended configuration of the "config.txt" file.
Did you respect the factory settings?
Or have you modified it?
Related
Any good with the trinity?
Soes the track title / caller ID display?
Any tweaks to make it better?
I'm on the verge of buying but unsure of how good it is...
I have them, and they work very well, caller id is shown, but only the number, not your actual contact name, and when you play music no info is displayed, too bad, i would have loved these extra functionalites, but apparently they are not supported, but its still a great headset, specially if you have a pc with bluetooth and you can have it paired with the pc and the mobile at the same time!
lmbranco said:
only the number, not your actual contact name, and when you play music no info is displayed, too bad, i would have loved these extra functionalites, but apparently they are not supported
Click to expand...
Click to collapse
Did you try JETware Hands-free Extension for Windows Mobile phones ( http://www.jetwaremobile.com/ )? It SHOULD work.
Also see http://forum.xda-developers.com:80/showthread.php?t=296770
HTC P3600 and Sony Ericsson HBH-DS970 Problem
I just purchased the DS970 and when I try to listen to music or use skype, it seems to skip or audio breaks up every 3 seconds. Anyone experienced this? If anyone can help, please post.
bcrosswhite said:
I just purchased the DS970 and when I try to listen to music or use skype, it seems to skip or audio breaks up every 3 seconds. Anyone experienced this? If anyone can help, please post.
Click to expand...
Click to collapse
can anyone confirm there is a serious clipping issue with this headset, i was seriously considering buying these but if they're crap then i'd rather put up with wires
For me the handset work only on music listening.
All the call go through the phone speaker, i am using the last french rom from htc.
Someone have a tip to make it works
xmen06 said:
For me the handset work only on music listening.
All the call go through the phone speaker, i am using the last french rom from htc.
Someone have a tip to make it works
Click to expand...
Click to collapse
yes, but does it play music well?
yes it plays music sound but when i make a call it switch on the speaker of the phone.
Hello, mine is working fine with phone (music re-start after a phone call), I can use all functionnality of this device (except forward and backward for music) but ther is too much "crush" when I listen to music (small "hoels" in the music); it seems to be due to A2DP...
BR
Ludovic
Bcross white, I get the same problem with the Motorola Sound pilot S705. when playing a music every 3s it cut for ~1s. So I can't listen the music.
Update : After reset it is working fine. I was wondering if it was not because I was sync over BT at the same time. My only last pb with a2dp is that the sound is bad and I'm still trying to enhance it.
BEWARE of Chinese-made copies of SE headsets which are all over eBay right now. They are very good copies but exhibit audio problems which the REAL versions don't.
Argghhhh...read too late!!!
aZooZa said:
BEWARE of Chinese-made copies of SE headsets which are all over eBay right now. They are very good copies but exhibit audio problems which the REAL versions don't.
Click to expand...
Click to collapse
I bougth one of that....!!!
Me too.
Here it is.
dubart said:
Me too.
Here it is.
Click to expand...
Click to collapse
Take my advice, never buy anything from a Hong-Kong/Taiwan/China/any Asian country seller
Thanks, but it's too late now. I did it cause this headset was sold for more than 100 € here in Croatia. Haven't received it yet, maybe it will turn up to be quite good after all, who knows...
dubart said:
Thanks, but it's too late now. I did it cause this headset was sold for more than 100 € here in Croatia. Haven't received it yet, maybe it will turn up to be quite good after all, who knows...
Click to expand...
Click to collapse
I bought 1 of the Chinese version and it's not too bad... saves a lot of money
If you turn on the stereo function (Change the registry), then it skips every 30 secs, legit or not it still does it.
I leave it to mono, to me, the music is fine. Not the greatest but not too bad. Remote control works with Pocket Player n plugins (play/pause, skip/back, answer/reject calls, volume up/down)
Really isn't too bad, hehe
I still can't get caller name to display though
I have recently purchase a SONY DR-BT20NX stereo wireless headset that is SUPPOSED to work as a hands free head set too. It's not behaving and wondered the following:
Does anyone run one of these and can advise?
Are there know problems with BT Stereo headsets on the Trinity that require tweeks?
It seems to be OK when playing music but when set as a hands free unit the phone will not ring, it will only sound in the earphones. It will not respond to an INCOMMING call only an outgoing one. NONE of the advance functions work when making or taking a call so I have to use the buttons on the PDA!
When used as a stereo headset it does seem to stop start and pause music ok from the button on the headset, and even skip to the next track. But as mentioned, NO functions work from the button on the BT headset when a using the phone, let alone the advance functions the thing is supposed to offer.
This is the second unit I've tried as I returned the first one to the supplier as I thought it was faulty as it was do too many stupid things.
Thoughts chaps...?
Sorry not much help with your specific model but I can report that the Trinity works well with the SonyEricsson HBH-DS970 both for audio and to manage phone calls. All buttons work properly.
Are you sure your model supports the Handsfree BT profile? I thought all phones and phone accessories were part of the SonyEricsson joint venture portfolio and Sony would not produce phone accessories under its own brand.
Read this, Sony BT20NX worked seamlessly (both A2DP and AVRCP) on Wizard :
http://forum.xda-developers.com/showthread.php?t=299954
@Anonimo
I did think the same way you are, until i see it myself on a store shelves... I really don't understand why either...
Anyway both DS970 and BT20NX have necklace design... or you may called it "gene"
MIZZO1628 said:
I have recently purchase a SONY DR-BT20NX stereo wireless headset that is SUPPOSED to work as a hands free head set too. It's not behaving and wondered the following:
*Sniped* ...
Thoughts chaps...?
Click to expand...
Click to collapse
I tried this in one of the stores and found that it was NOT working properly with my Trinity (WM6 Rom). It was skipping horribly. Gave up after 5mins of trying. The square design of the center piece makes it looks like it came from the 90s.
Anyway, I tried the http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02050 I-Clip Radio and it worked out of the box (Flawlessly). Even the Cyberion Voice commander (for handsfree dialing through wireless bluetooth) works beautifully. Bought it after 10mins of trying, used it for 5 days now ... no regrets! It comes with a 3.5mm audio socket so you can pair it to your favourite Sony EX headphone or the over priced Shure headphone. Sound quality is unbelievable. Try it ...
Just wondering if MIZZO1628 eventually got Trinity working with the Sony DR-BT20NX earphones? I really like the look of these, and am willing to do some reg hacking if necessary - but not if its going to be a dead end...
I also have the Sony BT headphones, and they have always been a problem with every rom (HTC Wizard included) that I have used.
I nearly always must edit the registry to listen to music, and the phone call function only works for outgoing calls.
I should have known better than to buy something with 'Sony' on it, but there was a recommendation elsewhere in this forum.
i opened my new transformer yesterday and loaded skype. tried voice chat and no-one could hear me. the sound recorder app shows slight movement if i tap the case where the microphone is, but bellowing into it shows no reaction. external headset mic works fine.
Is there some setting for input levels i hav'nt found yet? I would hate to be missing something obvious. Or should i just send it back
I think the built in microphone may be crap, I have fantastic results with voice recognition on my phone with a very small margin of error in recognition, on the transformer, the recognition is terrible.
I hope that it is a software issue where the settings can be changed to increase sensitivity.
If someone has a solution, please let us know.
update
the blue security tabs on the box were open, i thought my wife had opened it to check when delivered but she hadnt. I have sent it back to amazon and they are sending me a new one first class post, fair enough, it did seem a little second hand on close inspection. hopefully mic will work on the new one.
thanks
I had the same issue when I got mine, the mic was completely useless. After I rooted and installed Prime v1.4 everything works fine. Im assuming its an issue like the speaker imbalance where there is just an incorrect value somewhere in the code for mic gain or volume
Yeah, mine is crap too. I keep trying to do voice search to no avail.
I love this device, but man, it looks like they picked some really cheap parts for some items. Both my microphone and light sensor are not nearly sensitive enough to be usable, it's almost like they are just there to pad the spec sheet.
I find this so annoying, because previously I had a Nook color that I sold off because I wanted a true tablet, one with real Android support and such niceties as GPS, camera, microphone, light sensor, vibrating mechanism and notification LED that the Nook didn't have since it was designed as a e-book reader.
Now I find the Transformer has no LED (at least Nook had one on the cable), no vibration, light sensor and microphone that may as well not be there...
update
well i returned it saturday morning. new one arrived monday afternoon. great service amazon. anyway microphone works fine on this one so im happy everything else seems to be working ok so will see how i get on with it
when I record my voice in high quality I hear something like :
chchchichchch chchilly chchentenches and chcho bad chchound*
*(six silly sentences and a so bad sound)
I don't think it is a microphone problem, cause even with a half dollar microphone, sound can be better, no?
mic technology has not changed much in a while...its a commodity part that is bound to be afflicted by quality control and configuration...since there's an issue with the speakers it might also signal an issue with the Mic config
cubitusclaudius said:
I don't think it is a microphone problem, cause even with a half dollar microphone, sound can be better, no?
Click to expand...
Click to collapse
I think I agree.
If I put my mouth right next to the microphone, it will record my voice in an audible manner though not amazing quality. But it's not good enough for like voice searching or typing, not on my Transformer at least.
Shawn_230 said:
I think I agree.
If I put my mouth right next to the microphone, it will record my voice in an audible manner though not amazing quality. But it's not good enough for like voice searching or typing, not on my Transformer at least.
Click to expand...
Click to collapse
did you try to record your voice? the result is like under the water and the "s " sounds like "chchch ".
I tried a stereo bluetooth headphone with microphone integrated and the microphone isn't recognized. did somebody else notice the same.
the only satisfying way to chat or record with a correct sound is to use ordinary headphones with Microphone and it's not practical.
cubitusclaudius said:
did you try to record your voice? the result is like under the water and the "s " sounds like "chchch ".
I tried a stereo bluetooth headphone with microphone integrated and the microphone isn't recognized. did somebody else notice the same.
the only satisfying way to chat or record with a correct sound is to yous ordinary headphones with Microphone and it's not practical.
Click to expand...
Click to collapse
I did try to record my voice, that's how I arrived at that conclusion! Previously I had only tried to do voice inputs and failed, and just assumed my microphone was totally broken.
If I speak right into the microphone, then I can hear my voice okay... it's not distorted, just not amazingly clear. But this isn't really feasible, unlike a phone it's pretty hard to talk right into a tablet's microphone.
I haven't tried pairing Bluetooth headphones since mine broke before I bought the Transformer, but it should work for the microphone as well. You should check the Bluetooth settings page and make sure your Bluetooth headset is set to use both media and headset profiles, you need both to get audio playback and recording.
Shawn_230 said:
I did try to record my voice, that's how I arrived at that conclusion! Previously I had only tried to do voice inputs and failed, and just assumed my microphone was totally broken.
If I speak right into the microphone, then I can hear my voice okay... it's not distorted, just not amazingly clear. But this isn't really feasible, unlike a phone it's pretty hard to talk right into a tablet's microphone.
I haven't tried pairing Bluetooth headphones since mine broke before I bought the Transformer, but it should work for the microphone as well. You should check the Bluetooth settings page and make sure your Bluetooth headset is set to use both media and headset profiles, you need both to get audio playback and recording.
Click to expand...
Click to collapse
Yes. I checked it and both parameters are "on " but no microphone working. Thierry headset is working fin on my DHD
cubitusclaudius said:
Yes. I checked it and both parameters are "on " but no microphone working. Thierry headset is working fin on my DHD
Click to expand...
Click to collapse
Ah, no clue then, sorry.
I was big on Bluetooth headphones but recently gave up on them as I found them too much hassle to use. Now I have a USB headset for the computer, it's great except that it won't work on Android.
Shawn_230 said:
Ah, no clue then, sorry.
I was big on Bluetooth headphones but recently gave up on them as I found them too much hassle to use. Now I have a USB headset for the computer, it's great except that it won't work on Android.
Click to expand...
Click to collapse
on my laptop I use integrated microphone. works perfectly. on EEE pad I could use ordinary headset that works OK but imagine each time somebody wants to chat with you, finding your headphones , disentangle the wires and then answer. I confirm we live in the 18th century
asd_2000 said:
mic technology has not changed much in a while...its a commodity part that is bound to be afflicted by quality control and configuration...since there's an issue with the speakers it might also signal an issue with the Mic config
Click to expand...
Click to collapse
We should all put some video on Youtube showing the microphone quality recording for example on 44'000 sample rate. This would make people think before buying that crap, and maybe ASUS will try to change that.
I'm really furious about Microphone quality. voice search is impossible and chat is really hard
I was using spashtop and tried teamspeak to test the mic. No one heard anything. When I used my bluetooth stereo headset and mic, it was fine. I have not tested further and am not sure if that was a spashtop thing or the mic completely failing, but since seeing this thread, I guess I should check it.
I swear the mic almost seems like it's been fixed in 8.4.4.11 update.
I just did a test using the built in voice recorder app, and speaking at a normal distance it recorded my voice pretty well!
Voice search still seems less than perfect compared to my Android phone, not sure why this is. But the mic itself is now recording sounds as well as one can expect of any mobile device.
Shawn_230 said:
I swear the mic almost seems like it's been fixed in 8.4.4.11 update.
I just did a test using the built in voice recorder app, and speaking at a normal distance it recorded my voice pretty well!
Voice search still seems less than perfect compared to my Android phone, not sure why this is. But the mic itself is now recording sounds as well as one can expect of any mobile device.
Click to expand...
Click to collapse
Are you running on Stock ROM?
for me there is no difference of quality. try google search with a wired headset and you'll see how it is running fine.
Hey all,
Anyone have a solution for callers not being able to hear you when the call is taken through CarPlay over Zlink on a Joying head unit? My head unit is: JY-VO133N4. When I unplug my phone I'm able to have phone calls work great over blue tooth, so this appears to just be a Zlink/CarPlay issue. I can hear the caller perfectly, they just can't hear me.
Edit, they actually can hear me, but I come through with very low volume and with static, I'm undiscernable on their end.
Possible that it's trying to use the mic on your phone and not on the HU. I've done tests and this is what mine does. Where is your phone when driving?
looxonline said:
Possible that it's trying to use the mic on your phone and not on the HU. I've done tests and this is what mine does. Where is your phone when driving?
Click to expand...
Click to collapse
Have same problem. zlink use phone mic?
I have the same problem, try to rec an whatsapp audio and listen after, It sound same when you make the calls and I think and the sound is too looow and pooor. My bluetooth calls are great!!! what could be the problem?
Same problem here, which got worse after updating to IOS 14.8.
I can hear all people very clear, BUT they hear me very far and distant (so it is of no use).
It is NOT a hw mic issue, nor a headunit issue, because when I kill Zlink and use the audio unit's bluetooth, all works perfectly.
My bluetooth audio works fine, It is a pity that the calls do not work, it is the only thing need for work perfectly
I know this thread has some age to it, but I recently started having the same problem that while using CarPlay through zlink, any phones calls, no one could hear me, but mics worked when connected to android BT. Also worked connecting a Samsung phone through android auto. Only occurred using iPhone and CarPlay. Been going on for a few months and couldn’t for the life of me figure it out.
Even updated to iOS 15 and same problem.
Today I finally got it working!!
This is what I did. Hope it helps others.
Connect to the unit and let zlink connect and go into CarPlay.
From within CarPlay, open google maps.
Press the microphone button in the bottom corner of google maps. You should get a pop-up saying that you have to allow google access to the microphone.
Immediately look at your phone, you should have a request on the iPhone to allow google access to the microphone.
ALLOW IT!
Then press the microphone button again in google maps. It should now allow you to use voice for searching.
Now go place a phone call!
This solved the problem for me. Hope it helps others.
Thought I'd found a solution but there was no microphone button on CarPlays Google Maps
Hi at all.
I have recently built in a CC3 device.
And I have some questions about hardware and software. Maybe someone can help.
1: why is it, that the screen for air-conditioning, temperature etc. spontaneously pops up and don't dissappear by itself?
2: why is there only beep sounds from the parking distance control and no car symbol with colored waves (green to red)
3: why can't I choose YouTube as music widget, as described in teyes installation videos
4: can I change the widgets at all? New functions like whether forecast or GPS status instead of radio stations
Thanks in advance.
Greets, Sebastian
Hi i have similar problems with a skoda superb 3 2017, i am trying to find a good canbus configuration. Now i can see all car settings, cannot see call log, microphone is low, no graphics and beeps from rear sensors, volum from drive wheel is reversed.
I have tried both with rzc canbus and hi world canbus.
I have installed the aditional mic still same,
If i install the sim i can used only for data,
Please advise if i have to update it or anything to make it better, so far i want to uninstall it and use oem.
Hi Sebytech, I didn't found any solution so far. I am in contact with the support from AU and waiting for an answer. And still waiting for my MOST adapter. Have no sound at all.
But my vol. button is working.
No sound? Can you show me a few pics with what you have? And the settings of the canbus? I personally purchased another adapter and stereo sound inhave fromthe one purchased from au. My volume works from steering wheel is just upside down. Not sure if i need to do mcu update
Sebytech said:
Hi i have similar problems with a skoda superb 3 2017, i am trying to find a good canbus configuration. Now i can see all car settings, cannot see call log, microphone is low, no graphics and beeps from rear sensors, volum from drive wheel is reversed.
Click to expand...
Click to collapse
Volume reverse is a setting: Factory -> Reversal Volume.
Same for reversal previous-next. Factory -> Reversal previous next
And if you have a CC3, why don't you read and watch the instructions and instruction videos: https://cc3.teyes.ru/en/index.html
Sebytech said:
No sound? Can you show me a few pics with what you have? And the settings of the canbus? I personally purchased another adapter and stereo sound inhave fromthe one purchased from au. My volume works from steering wheel is just upside down. Not sure if i need to do mcu update
Click to expand...
Click to collapse
I have no sound, because I have a built in canton sound system and digital amplifier. My quadlock connector has therefore no cables to each respective speaker. The sound is transfered to the amplifier by lightwire. When I ordered the CC3 I didn't know much about this and there was no hint on the order page. Due to a German skoda superb forum, someone told me about the need of an MOST adapter. Teyes has such an adapter in their store. I still waiting for it.
What else I am wondering about, is that the pins in my quadlock adapter is no respectively not the same as in the adapter from Teyes and some pins go nowhere. So I think, some functions are missing from the beginning.
I had a little research but, this last pic looks like a power right ? the harness, everything is the same as i have except that plug, anything else related to the amp ?
surfer63 said:
Volume reverse is a setting: Factory -> Reversal Volume.
Same for reversal previous-next. Factory -> Reversal previous next
And if you have a CC3, why don't you read and watch the instructions and instruction videos: https://cc3.teyes.ru/en/index.html
Click to expand...
Click to collapse
Thank you, i will check that, i have check everything that is on the website, instructions are minimal, not everything is plug and play, any idea how to download the latest software? i have the latest mcu firmware but it always says invalid serial it.
thank you
SchaafBaeh said:
I have no sound, because I have a built in canton sound system and digital amplifier. My quadlock connector has therefore no cables to each respective speaker. The sound is transfered to the amplifier by lightwire. When I ordered the CC3 I didn't know much about this and there was no hint on the order page. Due to a German skoda superb forum, someone told me about the need of an MOST adapter. Teyes has such an adapter in their store. I still waiting for it.
What else I am wondering about, is that the pins in my quadlock adapter is no respectively not the same as in the adapter from Teyes and some pins go nowhere. So I think, some functions are missing from the beginning.
Click to expand...
Click to collapse
apologize, did you meant optical fiber?
Sebytech said:
apologize, did you meant optical fiber?
Click to expand...
Click to collapse
Oh, sorry. Your right. I wasn't so sure about the coorect term to translate it from German to English.
Sebytech said:
I had a little research but, this last pic looks like a power right ? the harness, everything is the same as i have except that plug, anything else related to the amp ?
Click to expand...
Click to collapse
No, this plug is the optical fiber plug. For this I purchased the Teyes Most 25 adapter. Hope, it will soon arrive.
SchaafBaeh said:
No, this plug is the optical fiber plug. For this I purchased the Teyes Most 25 adapter. Hope, it will soon arrive.
Click to expand...
Click to collapse
Yes i had a look on the web for some adapters..not really much about them.
Any idea about how to download latest software ?
Have you tested yours with phone calls ?
Sebytech said:
Yes i had a look on the web for some adapters..not really much about them.
Any idea about how to download latest software ?
Have you tested yours with phone calls ?
Click to expand...
Click to collapse
My sim card and wlan are working fine. So I opened the app Futo and checked for new versions (automatic updater) . After download and installation I opened teyes and downloaded the latest versions of all other apps.
Because I have no sound so far, I could no test it with sound. But as I received a phone call (phone was connected via BT) the CC3 showed me all needed buttons know for accepting/cancelling and ending a call.
I think i have a old version on mine, cannot find FOTA.
Can't you download it from their website?
SchaafBaeh said:
Can't you download it from their website?
Click to expand...
Click to collapse
I have spent the last few days to find all kinds of info in regards canbus, settings, mic settings, bluetooth settings, anything on their website is useless. either they have sold me a diff unit.. don`t know yet..took me a month to make it work..bad company
Sebytech said:
I have spent the last few days to find all kinds of info in regards canbus, settings, mic settings, bluetooth settings, anything on their website is useless. either they have sold me a diff unit.. don`t know yet..took me a month to make it work..bad company
Click to expand...
Click to collapse
Oh, ok. That's bad. And the support named Dan can't help you?
SchaafBaeh said:
Oh, ok. That's bad. And the support named Dan can't help you?
Click to expand...
Click to collapse
I am not sure, i do not know him and takes days for support to answer, i am not sure about this forum if anybody will help, but be aware about the following issue you might have with yours. Bluetooth connection will show phone but no dial list on dash, on the cc3 while on call the dial conversation stays on top..you need external mic, apparently will not use the oem one ..hopefully you will have better luck than me, i am almost there to go back to oem and just leave it...sim with lte its only for data only no phone calls. what is the point to have just data ? would have been nice to connect with the canbus and show on dash as cc3 and be able to make phone calls. Also why have a mic on the unit ? mic has to be close to u and well protected..
update me when you have setup.
Ok. I will. Have a nice day anyway.
Sebytech said:
Thank you, i will check that, i have check everything that is on the website, instructions are minimal, not everything is plug and play, any idea how to download the latest software? i have the latest mcu firmware but it always says invalid serial it.
thank you
Click to expand...
Click to collapse
Email Teyes directly and ask them for support. They have your data.
Only try via Dan if you purchased via Dan.