Related
Well here is what’s needed by me and by general demand that I noticed:
We need an application that will enable an android device (a tablet for instance) to act as a Bluetooth headset and dialer for another phone
I have searched through the forums but with no luck, all that I found where similar questions but unanswered!
http://forum.xda-developers.com/showthread.php?t=844605
http://forum.xda-developers.com/showthread.php?t=720397
http://forum.xda-developers.com/showthread.php?t=905938
http://forum.xda-developers.com/showthread.php?t=868062
So to sum it up I think we need a developer that can help us out also am willing to pay for it or buy it of the market if that’s what it takes
Cheers & thanks in advance
(PS: if this is not the proper place for something like this, please excuse the noob and redirect me to the proper thread)
Please guys. I'am looking to and is also willing to pay for it.
I'm also willing to pay for the application. Please someone help us?
bump!!
bump!!
come on guys... any thing?!?
bump
this should be a default feature for android...
I have been asking for the same thing, Moscow Desire is looking into it with LeeDroid to try and implement something by porting it from a phone I think...I'm waiting on pins and needles.
The thread on it is here, the last couple pages:
http://forum.xda-developers.com/showthread.php?p=23447188&posted=1#post23447188http://forum.xda-developers.com/showthread.php?p=23447188&posted=1#post23447188
It's not what we're looking for.
In the thread they are trying to get bluetooth headsets to work on a tablet.
We are looking for an app that can get a tablet to connect to a phone and make calls.
For example, I have my tablet built into my car and connectet to my car radio via cable. It would be nice if it could make and receive calls.
Bluetooth dialer
simonmbjornes said:
It's not what we're looking for.
In the thread they are trying to get bluetooth headsets to work on a tablet.
We are looking for an app that can get a tablet to connect to a phone and make calls.
For example, I have my tablet built into my car and connectet to my car radio via cable. It would be nice if it could make and receive calls.
Click to expand...
Click to collapse
Hi! I have been searching for the same solution from months but the onle thing i have found is,
"dealextreme.com/p/minipad-a9-1-lcd-bluetooth-dialer-headset-white-94840"
so untill any developer work on true bluetooth applitacation which can fulfill our needs this is the only thing we can use.
I started a thread on this then discovered that it's been asked plenty of times before. After doing research I have discovered the following things:
1) It is possible to replace the Bluetooth stack on Android
2) We would have to make Android play the role of the hands free and not an audio gateway
3) This has been implemented - http://www.parrot.com/usa/products/bluetooth-hands-free-car-kits/parrot-asteroid
4) The stack on Android is BlueZ
5) The devs at Cyanogen mod have been working with the Android Bluetooth stack
From what I can see, we would have to modify the Hands-Free Profile in the Bluez stack to play the hands-free role. If we could somehow load in another profile or edit the existing one, that might do the trick. I'm not too familiar with Bluetooth, but I will be going over code tonight to see if I can come up with an idea.
touchpad webos has this capibility
I have a hp touchpad with cynogenmod 9 that dual boots to webos. In webos, i can link via bluetooth to my blackberry phone. I can call and receive via a dialer app in webos. I have not been able to figure out how to do this on the android boot. I can pair the device but haven't figured out how to do in android. Hoping since wedos went open there might be an app for android to mirror the webos capibility.
I've posted support for this development in a number of forums and in other threads here at XDA. This would be a huge deal for the 'android-as-car-stereo' idea. There are a number of suppliers that make USB-->DAC-->RCA(composite) converters, and that takes the shoddy internal DAC out of the equation for most tablets. All that is left is the need for bluetooth call transfers to the tablet.
hopefull news
people check this out:
https://play.google.com/store/apps/details?id=com.funkyandroid.phonelink
its to connect between tablet and android phone hopefully this might lead somewhere!!
I have a Bluetooth transmitter (B-Speech RTX1) attached to my AV-receiver and want to use my phone with headphones as a speaker system. There has to be an app that plays the stream once we can connect a transmitter via HFP profile with the phone I guess...
I don't know if my wish is related to this thread, but there is a thread explaining how to enable HFP in Android by editing the "audio.conf".
I get the new options but am not able to connect the transmitter to my phone. I guess I will have to buy BT-headphones...
I too am looking for this service to be done (using my tablet in my dash of my car connected to my amp's/speakers). Another post for this can be seen here: http://forum.xda-developers.com/showthread.php?t=844605
I just tried the method posted in the link above by hudl.. but it didn't work. My tablet still pairs with my phone like before, no way to connect them, nor the "use for phone audio" option from my phone to the tablet. :-( Still no solution as of yet.
I think this might work for ya
I haven't tried it yet, but am downloading it now. After much searching I think this is what we've been looking for.
jimbill88 said:
I haven't tried it yet, but am downloading it now. After much searching I think this is what we've been looking for.
Click to expand...
Click to collapse
???
I'd love to see this and would happily pay towards development of this. Parrot Asteroid seems to handle incoming HFP, HSP and A2DP profiles very well. I too have modified the audio.conf file and can also see the additional options.. My phone just doesn't know what to do with it!
Is there anyone who can point this thread in the right direction? It's the only piece of the puzzle left for android carpc tablet goodness.
Thanks,
MrNorm
Just reviving interest in this thread again as tablets in cars are becoming more and more common.
Checking if any developer is still willing to help out, I am sure there are plenty of willing users waiting with their wallets ready
Cheers
Mario
Parrot did it for sure. It would be an awesome feature. I wish things just worked like that by default... someone needs to re-invent a BT-like connection where everything on a device is exposed... a phone should be a BT keyboard/mouse/airmouse/headset/speaker/monitor/camera/drive/sdreader/modem/gps/serial-console/etc as well as being on the opposite end of each of those things. And without needing a separate app for each of those things that is even possible/created.
http://www.gottabemobile.com/2012/04/18/using-the-galaxy-player-3-6-as-a-bluetooth-handset/
If we could use Samsungs work in this player we could easily implement it.
I understand that this forum is to direct me to a relevant thread or topic to post under. Would appreciate guidance for where to post the following question...
I am looking for a remote desktop solution, like LogMeIn or TeamViewer that doesn't require me to do any detailed configuration.
The problem is that LogMeIn, for example, won't treat my Note 3 phone as a tablet, so I can't use the mouse like a normal mouse. (The settings for mouse are "move mouse" and "move screen", but there is no direct mode available for phones to use a mouse like a regular mouse.)
My device is an Android 4.4 KitKat Samsung Note 3 phone (unfortunately rooting is not an option for me), and I am using it with the Note 2 dock with an external monitor and wireless usb keyboard/mouse. Everything works great except I can't find a good remote desktop solution that will allow me to work "normally" in terms of the mouse.
I also have Win 8 Home version and do not want to configure port forwarding and a fixed ip to solve rotating external IP address assignments. (Please excuse me if I didn't say that correctly, but I really don't want to deal with those kinds of complexities.) Yes, I realize that I may have too many constraints - no configuration challenges (which I think rules out VNC or standard RDP), and also no rooting of the phone. But I am willing to pay a small monthly subscription, e.g. I looked at PocketCloud with $5/month, but that doesn't seem to support my requirement either from a quick look at the manual.
Is there anyone who can suggest a good solution for my situation?
Hi,
The info that you provided is great, however the Note 3 is divided up on XDA by carrier, so:
If you will type Note 3 in the box above (type to find your device) , select your carrier version, go to that forum's Q & A to post your question, you should be good to go !!
Regards.
Pony Express said:
Hi,
The info that you provided is great, however the Note 3 is divided up on XDA by carrier, so:
If you will type Note 3 in the box above (type to find your device) , select your carrier version, go to that forum's Q & A to post your question, you should be good to go !!
Regards.
Click to expand...
Click to collapse
Thanks! XDA Assist is a great idea. First time I've ever seen that in a forum.
And I really like your tag line...
To the world you are someone. To someone you are the world.
I was given a car stereo for a present . best present ever .
Its a duel operating system android wince
It was all working correctly for about a month then the android part became faulty.
it comes up with a error message .
bonovoHandle has stopped . when this comes up after booting the screen dulls
you can press ok but then it does the same thing.
I have had many attempts in contacting Newsmy but not one single reply. the ebay shop it was purchased from has closed down .
the windows part works well just the android is dead. I think if I was able to get firmware for it I could fix it but cant find that anywhere .
I really appreciate any help . links or advice . This website has been a big help amongst my friends but this android stereo has us all beat. Until it died this stereo was the best thing since sliced bread. Big thankyou for any help
Mr Winter said:
I was given a car stereo for a present . best present ever .
Its a duel operating system android wince
It was all working correctly for about a month then the android part became faulty.
it comes up with a error message .
bonovoHandle has stopped . when this comes up after booting the screen dulls
you can press ok but then it does the same thing.
I have had many attempts in contacting Newsmy but not one single reply. the ebay shop it was purchased from has closed down .
the windows part works well just the android is dead. I think if I was able to get firmware for it I could fix it but cant find that anywhere .
I really appreciate any help . links or advice . This website has been a big help amongst my friends but this android stereo has us all beat. Until it died this stereo was the best thing since sliced bread. Big thankyou for any help
Click to expand...
Click to collapse
hey,i saw your thread in newsmy forum,
i think you needs a firmware to get your carpad reborn...
ok,i've found one for you.
here is the update image:Kitkat 4.4.2 for AD3188,800x480 model.if your HU is 1024x600,don't use this.
http#//pan.baidu.com/s/1kTso5AR
and this is a flash tool for PC,no Mac,you know..
http#//pan.baidu.com/s/1eQu0IQm
method to enter flash mode:
1.powered your android box
2.connect it to your computer
3.if you can see that software's first gray box turns pink,you got it.
or
1.unplug the power cable
2.press down the reset button
3.don't release it ,plug in the power cable.
4.you will get the pink box.
br,
zygame
zygame said:
hey,i saw your thread in newsmy forum,
i think you needs a firmware to get your carpad reborn...
ok,i've found one for you.
here is the update image:Kitkat 4.4.2 for AD3188,800x480 model.if your HU is 1024x600,don't use this.
http#//pan.baidu.com/s/1kTso5AR
and this is a flash tool for PC,no Mac,you know..
http#//pan.baidu.com/s/1eQu0IQm
method to enter flash mode:
1.powered your android box
2.connect it to your computer
3.if you can see that software's first gray box turns pink,you got it.
or
1.unplug the power cable
2.press down the reset button
3.don't release it ,plug in the power cable.
4.you will get the pink box.
br,
zygame
Click to expand...
Click to collapse
Thankyou for your help. I have the high resolution android car pad . could you please help me find software for hi resolution version . I am sorry I do not speak or read Chinese and the download links are hard for me. Is there any English sites please . very great full for your help.
Mr Winter said:
Thankyou for your help. I have the high resolution android car pad . could you please help me find software for hi resolution version . I am sorry I do not speak or read Chinese and the download links are hard for me. Is there any English sites please . very great full for your help.
Click to expand...
Click to collapse
1024x600's latest firmware is: AD3188_S_KK4.4.2_1.0.3_1024x600
http#//pan.baidu.com/s/1hquw37A
Update tool is:
http#//pan.baidu.com/s/1eQu0IQm
Sorry I can't upload them to mega or somewhere,because my network have a very-low bandwidth to upload.
I'll let you know how to download it at baidu disk.
View attachment 2951120
View attachment 2951121
And then you should unzip them all and open the update tool.
View attachment 2951125
So,the last thing you should do is connect the carpad to your computer and wait the software connect it.
if not ,you can plugin the power cord and press the reset button for 5 sec to enter the flash mode.
good luck
I also have a Newsmy Carpad II on a Ford Focus. It also have WinCE and Android box.
And no: the customer service is not able to answer your questions. They can only sell but not follow the customers.
I dont know chinese, and with translators I cannot register to their forum /bbs (btw how did you? I saw your post)
My systen have many bugs ( FM radio RDS, not functioning, volume that sometimes raise to full or drop to zero after a single tap) and now the backlight of dash is disappeared.
At the beginning I had contact with skype, now they are not aswering at all..
Cruiser_541239 said:
I also have a Newsmy Carpad II on a Ford Focus. It also have WinCE and Android box.
And no: the customer service is not able to answer your questions. They can only sell but not follow the customers.
I dont know chinese, and with translators I cannot register to their forum /bbs (btw how did you? I saw your post)
My systen have many bugs ( FM radio RDS, not functioning, volume that sometimes raise to full or drop to zero after a single tap) and now the backlight of dash is disappeared.
At the beginning I had contact with skype, now they are not aswering at all..
Click to expand...
Click to collapse
Mr Winter said:
I was given a car stereo for a present . best present ever .
Its a duel operating system android wince
It was all working correctly for about a month then the android part became faulty.
it comes up with a error message .
bonovoHandle has stopped . when this comes up after booting the screen dulls
you can press ok but then it does the same thing.
I have had many attempts in contacting Newsmy but not one single reply. the ebay shop it was purchased from has closed down .
the windows part works well just the android is dead. I think if I was able to get firmware for it I could fix it but cant find that anywhere .
I really appreciate any help . links or advice . This website has been a big help amongst my friends but this android stereo has us all beat. Until it died this stereo was the best thing since sliced bread. Big thankyou for any help
Click to expand...
Click to collapse
I'm sorry to hear about these issues, these Carpad II units look very interesting but there is very little information out there about them. Anyone with one of these units, could you answer these questions:
1) Do steering wheel controls work in Android, or only in WinCE?
2) Can you listen to the radio (WinCE I assume) and run an Android app simultaneously? So say listen to the radio and also run the Waze gps app with voice prompts. How does it handle the audio mixing?
3) What is the boot time? From ignition to radio playing. I have a pure android unit now but the boot time is slow. I understand WinCE is much faster, and I hope the radio would start playing while the android system is still booting up.
Thanks!
Skitals said:
I'm sorry to hear about these issues, these Carpad II units look very interesting but there is very little information out there about them. Anyone with one of these units, could you answer these questions:
1) Do steering wheel controls work in Android, or only in WinCE?
2) Can you listen to the radio (WinCE I assume) and run an Android app simultaneously? So say listen to the radio and also run the Waze gps app with voice prompts. How does it handle the audio mixing?
3) What is the boot time? From ignition to radio playing. I have a pure android unit now but the boot time is slow. I understand WinCE is much faster, and I hope the radio would start playing while the android system is still booting up.
Thanks!
Click to expand...
Click to collapse
The unit is very interesting and powerful, the fact you can't talk with the support is ridiculous because sometimes a problem can go away in 5 minutes of skype talks..
1) Only in WInCE. But not sure of your question.
2) Yes you can. WinCE have different volume levels (media, radio, phone, video ..) but all the audio in Android environment is streamed in the MEDIA channel of WinCE. You can still control single volumes in Android.
This is not so bad, but there is only a problem: music stream doesn't drop down during speech of navigators in Android.
3) Boot time is longer than OEM equipment of corse. First to be ready is WinCE with all the media and canbus sections. Radio (if on before last power off) start immediately. Android double the time. I use it for Sygic Navigator, and Google Maps navigation (the best because always up to date and with real time traffic)
Dont buy one
Skitals said:
I'm sorry to hear about these issues, these Carpad II units look very interesting but there is very little information out there about them. Anyone with one of these units, could you answer these questions:
1) Do steering wheel controls work in Android, or only in WinCE?
2) Can you listen to the radio (WinCE I assume) and run an Android app simultaneously? So say listen to the radio and also run the Waze gps app with voice prompts. How does it handle the audio mixing?
3) What is the boot time? From ignition to radio playing. I have a pure android unit now but the boot time is slow. I understand WinCE is much faster, and I hope the radio would start playing while the android system is still booting up.
Thanks!
Click to expand...
Click to collapse
my car has no steering wheel buttons other than horn so I don't know , but if you buy one which I suggest you don't as this one worked just for a month and because I am overseas, china newsmy want nothing to do with me . they advertise it has can bus controls for some major brands. Newsmy HAS NO CUSTOMER SERVICE.
Still not working .
zygame said:
1024x600's latest firmware is: AD3188_S_KK4.4.2_1.0.3_1024x600
http#//pan.baidu.com/s/1hquw37A
Update tool is:
http#//pan.baidu.com/s/1eQu0IQm
Sorry I can't upload them to mega or somewhere,because my network have a very-low bandwidth to upload.
I'll let you know how to download it at baidu disk.
View attachment 2951120
View attachment 2951121
And then you should unzip them all and open the update tool.
View attachment 2951125
So,the last thing you should do is connect the carpad to your computer and wait the software connect it.
if not ,you can plugin the power cord and press the reset button for 5 sec to enter the flash mode.
good luck[/QUOTE
I found some usefull links for car pad owners but mine is not accepting firmware upgrade . I get the pink box but then I get red tex telling me firmware will not load error. and pink box never flashes yellow I am thinking I have the wrong firmware version. I will try others . downloads are slow and often time out so I have to download again . will keep trying.
I cant tell what firmware I need , I don't have the box anymore and it never came with English instructions so I tossed them away. All I can tell you is written inside the pure android box is this. AD3188-JB4.22-CARPAD-1.0.0 THEN IN PEN IT HAS -79 . thankyou for your help
Click to expand...
Click to collapse
links
I still cant post links and I am still on a 5 minute restriction
Mr Winter said:
I still cant post links and I am still on a 5 minute restriction
Click to expand...
Click to collapse
still the same
Mr Winter said:
still the same
Click to expand...
Click to collapse
no change.. newsmy car stereo is no good.
I managed somehow to subscribe and post 3/4 questions on their chinese forum.
I obtained a couple of posts from another user (useful for the specific topic), and stop. No one from Newsmy answered in a week.
At this point I just have to hope that the Carpad will never break, and take back my unanswered questions.
For this reasons I strongly discourage anyone from outside China to buy a product newsmy.
In Italy I am a moderator in a forum community of the same vehicle of mine.
There was a lot of waiting for the reviews on this product, others would follow me to the purchase of Carpad probably. Now it will not happen.
http://forum.xda-developers.com/android/general/4-4-2-kitkat-head-unit-newsmy-carpad-t2865525
In here we are very happy with this unit!
What's wrong with your products？I am summer from Newsmy,maybe i can help you.
Sent from my vivo Y17T using XDA Free mobile app
---------- Post added 31st December 2014 at 12:10 AM ---------- Previous post was 30th December 2014 at 11:39 PM ----------
which model？ who sell to you？ and what is your problem？
Sent from my vivo Y17T using XDA Free mobile app
Hi Summer,
my unit came from tradesolution.hk,
images and serial number in attachment.
I have differents issues, here are some:
RADIO SECTION->
- 80% of the FM stations I get them in MONO;
- FM "AF" function, is not funcional. I travel to the same cities every days, and with others radio I can keep the same radio stations, with CARPAD I lose the signal. Before I listened always two or three stations and frequencies changed without me lose the signal. With Carpad not happen.
- RDS never received any stream, even if the symbol appears on display;
(FM OEM antenna is connected, in fact, by disconnecting the cable, I do not find any station)
- I cannot scan FM with binded phisical key: only via touchscreen, and this is really useless;
OTHERS->
- I do not have the rear parking sensors, but I have aftermarket rear camera: I correctly get the image on the unit, but without sensors I get a continuos annoying beep and I cannot disable in any way. make a software way to DISABLE it;
- the quality of the microphone in a phone call is very very LOW.. make a software way to allow the use of an auxiliary microphone;
- backlight sometime is off, although in the rest of the dashboard is turned on;
...
I have other problems to list, but for the moment I stop. let's see what happens.
I consider regrettable the fact that the service contact on skype has abandoned me without answer. And from your forum you have locked my account after I asked a few questions.
Summer-Newsmy said:
What's wrong with your products？I am summer from Newsmy,maybe i can help you.
Sent from my vivo Y17T using XDA Free mobile app
---------- Post added 31st December 2014 at 12:10 AM ---------- Previous post was 30th December 2014 at 11:39 PM ----------
which model？ who sell to you？ and what is your problem？
Sent from my vivo Y17T using XDA Free mobile app
Click to expand...
Click to collapse
Hello
I bought a newsmy carpad 2 for my ford focus 1.6 tdci 2010. Unfortunately I became no support from newsmy, althought I wrote severals mails: no answer, no help, nothing. I' m very disappointed! The newsmy carpad 2 is a very good product, but without support from producer Newsmy!!
I explain here my problem one more time with the hope that someone may help me!
I have a problem with the Newsmy Ford Mondeo,Focus 08,S-Max Android 4.2 Capacitive Touch Screen Car Pad 2. The serial number of the DVD Player is: SN E5PCF0018HQ0010 (overseas stock).
I installed the DVD Player. Unfortunately the wheel controls and the backlight of the player don't work. I asked a technician about it. He told me that the DVD player must be configured with the newest firmware of the player and with the software vehicleconfig otherwise the can-bus module of the player cannot work properly with my car. My car is a ford focus 1.6 tdci 2010.
Somebody can help me please??
Thanks in advance!
Roberto
Summer-Newsmy said:
What's wrong with your products？I am summer from Newsmy,maybe i can help you.
Sent from my vivo Y17T using XDA Free mobile app
---------- Post added 31st December 2014 at 12:10 AM ---------- Previous post was 30th December 2014 at 11:39 PM ----------
which model？ who sell to you？ and what is your problem？
Sent from my vivo Y17T using XDA Free mobile app
Click to expand...
Click to collapse
... Where are you Summer ...
We can also take one answer at a time if you want. For example we can begin with:
Is Newsmy really interested in take care of overseas customers, or is a "sell and forget" company?
We really take care of your problem, yoy can add my skype for problems: summer_352.
Sent from my vivo Y17T using XDA Free mobile app
Upgraded Android with instruction and image file given:
is it normal ?
I have lost Android Box??
:edit
NEVERMIND! Upgrade succeeded!
This 4.4 Android version is beautiful configured this way on the carpad and I can see a better UI and user experience.
Good work for this upgrade.
In the WinCE section instead, there is still an open issue regarding RDS and its related AF (alternate frequencies) function. This function allow user to travel km and km keeping the same Radio Station tuned. This function is responsible to scan in the background for alternative frequencies of the selected station and transparently switch.
Unfortunately carpad is currently sold as "RDS enabled" but is not fully enabled.
Hope in the future the manufacturer will update this part too.
Many thanks to Summer.
I am going to pass your skype contact other clients I know who are not fully satisfied with the product. I hope you will want to give them some good advice.
Hey all, is there a way to assign long press and short press function to a same key on the steering wheel?
i have a Joying Android 10 headunit.
here is an example from Teyes video.
that would be interesting
No, it is not. It is a T'eyes feature.
<deleted the rest>
surfer63 said:
No, it is not. It is a T'eyes feature.
<deleted the rest>
Click to expand...
Click to collapse
I remember it was available on my old Eonon Android 8 so not a Teyes feature
It's written about on 4pda and involves direct MCU firmware change.
TheDarkKnight1 said:
I remember it was available on my old Eonon Android 8 so not a Teyes feature
Click to expand...
Click to collapse
Was it a FYT unit
Teyes feature, modification of MCU and installing the Teyes button app is discussed on 4pda.
Its been done?
Can you share the link pls?
TheDarkKnight1 said:
Its been done?
Can you share the link pls?
Click to expand...
Click to collapse
Yes
No - not permitted here. No I wont PM
"Unisoc head units based on UIS7862 / SC9863a (UIS8581A) Android 10 | Car radio and Android device"
I had this function on my old Xtrons PX5. On my Teyes CC3, this function works very badly, and disappears regularly!
JMM44700 said:
I had this function on my old Xtrons PX5. On my Teyes CC3, this function works very badly, and disappears regularly!
Click to expand...
Click to collapse
I dont really miss it....
JMM44700 said:
I had this function on my old Xtrons PX5. On my Teyes CC3, this function works very badly, and disappears regularly!
Click to expand...
Click to collapse
Yea it must be stable on Xtrons but Teyes is crap maybe that's why.
TheDarkKnight1 said:
Yea it must be stable on Xtrons but Teyes is crap maybe that's why
Click to expand...
Click to collapse
Depends who you ask. I'd agreed or at least say they are focused on Eastern Europe.
hello.
Just bought
EKIY T9 Car Radio For Mitsubishi Pajero V60 V68 V73 1999-2006 Tesla Vertical Screen Navigation GPS Android Stereo Receiver 2 Din
https://www.aliexpress.com/item/1005003275616023.html?spm=a2g0o.productlist.0.0.15bb56fewlW73x&algo_pvid=3259034d-271a-49a9-b3c0-e8e335fe5a79&algo_exp_id=3259034d-271a-49a9-b3c0-e8e335fe5a79-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000024973613104%22%7D&pdp_npi=2%40dis%21ILS%211010.22%21434.39%21434.39%21%21%21%21%400b0a119a16701084471075066e971a%2112000024973613104%21sea&curPageLogUid=D01agD5n8x4g
The android auto is different. I cant use maps and music at the same window. I attached a video to show you how it looks. No Split-Screen design for some reason. Maybe its related to android 10?
my questions are:
1. How can I make android auto to work regular? As I see in the pictures in the play store?
2. How can I force android auto to work on full screen mode?
3. Is there an update to android 11/12/13 for my machine? Im running android 10. Moreover, I can not find the check for updates options
any ideas? also attached the version of the machine
thanks
1) Android Auto currently does not support split-screen, only at very few top-market builtin AA screens. So certainly not on these units using a reverse-engineered CarLink apk. Android Auto is kept simple to keep it as safe as possible.
2) You can't. Android auto copies your screen to the head unit (or car builtin in screen). It will be more or less your phone screen. That works nicely on a normal 8" - 13.3" landscape unit, but not on a Tesla style vertical screen. (And why use AA??? You have such a nice screen on a fully functional Android unit)
3) There is no Android 11/12/13 for your unit. If you see Android 11/12/13 units for the FYT7862, then they are fakes.
Please first read post # of this thread. Based on your question 3) you did not much reading yet. That is what this forum is for. Learning, not only asking.
Last summer Google announced that they are working on a new AA, together with Google Assistant, for many type of screens (as more cars get Tesla style screens) and for split-screen. I have no idea when that gets released and whether the FYT CarLink.apk will support it.
surfer63 said:
1) Android Auto currently does not support split-screen, only at very few top-market builtin AA screens. So certainly not on these units using a reverse-engineered CarLink apk. Android Auto is kept simple to keep it as safe as possible.
2) You can't. Android auto copies your screen to the head unit (or car builtin in screen). It will be more or less your phone screen. That works nicely on a normal 8" - 13.3" landscape unit, but not on a Tesla style vertical screen. (And why use AA??? You have such a nice screen on a fully functional Android unit)
3) There is no Android 11/12/13 for your unit. If you see Android 11/12/13 units for the FYT7862, then they are fakes.
Please first read post # of this thread. Based on your question 3) you did not much reading yet. That is what this forum is for. Learning, not only asking.
Last summer Google announced that they are working on a new AA, together with Google Assistant, for many type of screens (as more cars get Tesla style screens) and for split-screen. I have no idea when that gets released and whether the FYT CarLink.apk will support it.
Click to expand...
Click to collapse
Thank you for commenting. I'll read the link. Sorry for that. I am new with all this.
and last question - There is no way I can see android auto as in the following picture? I mean I see here navigation+music on the same sceen. Do you know any system on Ebay that I can buy that supports it?
Thank you.
darixtorento1 said:
Thank you for commenting. I'll read the link. Sorry for that. I am new with all this.
and last question - There is no way I can see android auto as in the following picture? what is AA screens?
Thank you.
Click to expand...
Click to collapse
As far as I know: not yet.
As far as I know that is currently only available on a very selected set of built-in car units that support AA.
For my work I also regularly drive rental cars and all cars do have AA builtin (as they are never older than 1 year), but none so far with split-screen.
And please don't use webp images. The forum can't show them so I first need to download them. I don't want that.
surfer63 said:
As far as I know: not yet.
As far as I know that is currently only available on a very selected set of built-in car units that support AA.
For my work I also regularly drive rental cars and all cars do have AA builtin (as they are never older than 1 year), but none so far with split-screen.
And please don't use webp images. The forum can't show them so I first need to download them. I don't want that.
Click to expand...
Click to collapse
Ok. Thank you.
and last question-
When I hear music via Bluetooth, it works when I only enter a specific screen . Is there a way to make it work when I leave the specific screen or application?
darixtorento1 said:
Ok. Thank you.
and last question-
When I hear music via Bluetooth, it works when I only enter a specific screen . Is there a way to make it work when I leave the specific screen or application?
Click to expand...
Click to collapse
Via AA, or directly and only connected via Bluetooth?
If you simply have your phone connected and play music on your unit in the Music Player via BT, it should simply work.
For AA via CarLink I don't know. On my unit I never, ever use AA: what a waste of such an expensive unit with such great funtionality to use it as an AA unit. There are special AA /CarPlay Android units below 100 euros for sale on Amazon and AliExpress, and these do it wirelessly as well.
I only use AA in rental cars.
surfer63 said:
1) Android Auto currently does not support split-screen, only at very few top-market builtin AA screens. So certainly not on these units using a reverse-engineered CarLink apk. Android Auto is kept simple to keep it as safe as possible.
2) You can't. Android auto copies your screen to the head unit (or car builtin in screen). It will be more or less your phone screen. That works nicely on a normal 8" - 13.3" landscape unit, but not on a Tesla style vertical screen. (And why use AA??? You have such a nice screen on a fully functional Android unit)
3) There is no Android 11/12/13 for your unit. If you see Android 11/12/13 units for the FYT7862, then they are fakes.
Please first read post # of this thread. Based on your question 3) you did not much reading yet. That is what this forum is for. Learning, not only asking.
Last summer Google announced that they are working on a new AA, together with Google Assistant, for many type of screens (as more cars get Tesla style screens) and for split-screen. I have no idea when that gets released and whether the FYT CarLink.apk will support it.
Click to expand...
Click to collapse
Ive tried on another vertical screen. There is full screen
darixtorento1 said:
Ive tried on another vertical screen. There is full screen
Click to expand...
Click to collapse
Yes, you are right. I was wrong.
Still looking for a solution . thank you
Still looking for a solution . thank you
darixtorento1 said:
Still looking for a solution . thank you
Click to expand...
Click to collapse
What does the manufacturer Ekiy say? You ask us but do not mention what Ekiy answers on your questions.
surfer63 said:
What does the manufacturer Ekiy say? You ask us but do not mention what Ekiy answers on your questions.
Click to expand...
Click to collapse
He doesn't know
UP
The App on the head unit is a hacked app written by the Chinese so they do not have to pay any royalties/licencing fees. Android Auto is written only for supported Head Units using unhacked software where the maker pays the correct fee.
So every change on the Official Android Auto app does not consider what effect it has on a hacked app, so if it stops working you are reliant on the Chinese hackers fixing the hacked app. Hence no reply to your request and why I do not use Android Auto on these units.