Hey guys I have a big problems with my esim profiles on my Note 20 Ultra. After firmware update I lost my eSim profile from settings and now when I'm trying to add a mew one my phone says eSim is full delete one but in settings there is mo eSim profile.
I tryed to reset my phone (Factory data reset) and also Network reset and not working. Can someone helpe to locate that and completely remove from my phone.
samartin997 said:
Hey guys I have a big problems with my esim profiles on my Note 20 Ultra. After firmware update I lost my eSim profile from settings and now when I'm trying to add a mew one my phone says eSim is full delete one but in settings there is mo eSim profile.
I tryed to reset my phone (Factory data reset) and also Network reset and not working. Can someone helpe to locate that and completely remove from my phone.
Click to expand...
Click to collapse
i had to call my provider to send me new code via email, then it worked, as old 1 will not work.
Related
Long story short, I reset some of my APN settings to default while running Dirty Unicorns, I could connect to data but couldn't text/call. I've now flashed my phone to stock and performed a factory reset but no luck. I also took my phone into Sprint and they were unsuccessful. They told me I could upgrade or pay $75, I don't want to do either so I'm really hoping someone knows a solution!
Some things:
1) If I look in my phone identity information, the MIN and phone number say unknown
2) Data doesn't work at all now
3) If I change to CDMA only then it simply shows not connected to any network.
I recently bought a new DZ09 smart watch. As I wanted to use the browser and Facebook, etc., I inserted a SIM card. Calls and Texts work fine but I knew I'd need to set up my APN settings to be able to use data.
I googled what to do and went to my phone settings, expecting to see a section where I could enter my SIM provider's APN settings. But it was missing. Has anyone else had this problem? If so, is it going to be a case of updating the firmware?
Thanks
Ditto
Usually this is in the connectivity settings
same problem is mine . in my DZ09 Smartwatch Connectivity setting missing. i wants to use internet please help me to solve my problem
realjeffster said:
I recently bought a new DZ09 smart watch. As I wanted to use the browser and Facebook, etc., I inserted a SIM card. Calls and Texts work fine but I knew I'd need to set up my APN settings to be able to use data.
I googled what to do and went to my phone settings, expecting to see a section where I could enter my SIM provider's APN settings. But it was missing. Has anyone else had this problem? If so, is it going to be a case of updating the firmware?
Thanks
Click to expand...
Click to collapse
Go to setting then APN setting click on option and click on reset to default. I hope these solve your problem.
Hello all and thank you for your time,
I recently updated my Verizon GS6 from Lollipop to Nougat using the Verizon Wireless Software Upgrade Assistant because the update wouldn't occur using the phone's update software feature. Since updating I've lost the ability to use the LTE network by any means at all. I have no data whatsoever, as the APN settings have been altered through this update. I am registered to Straight Talk Wireless and the phone is trying to connect to Verizon using a generic APN. I'd love to change the APN setting but the phone will not allow me to edit anything but the name of the APN. Adding or editing further is completely colored out.
So far I've tried:
1. Soft resets
2. Hard resets
3. Wiping the cache
4. Swapping SIMS of all 4 networks
5. Turning Wi-Fi on and off Turning Mobile data on and off
6. Searching all throughout the internet for answers
So if no one has the answer how to fix this situation is it possible to reverse my update and head back to Lollipop? Is it possible to root the phone to somehow access the APN settings by other means?
Any help would be greatly appreciated as I need to use data for my job.
Thanks!
LG V50 Sprint no calls and sms?
I got this phone unlocked and updated working fine with LTE data connection with my provider here ooredoo Algeria fast and stable.
The problem itt showes phone signal is full but when I dial a number it says "no sim card"
+ sms is not working altogether as well.
Any help fix / pointers would be greatly appreciated
Hi!
The same thing happened to me, I couldn't send messages or call until I activated the automatic network mode, otherwise it wouldn't let me call.
I hope I have been helpful with this.
Mc AGV said:
Hi!
The same thing happened to me, I couldn't send messages or call until I activated the automatic network mode, otherwise it wouldn't let me call.
I hope I have been helpful with this.
Click to expand...
Click to collapse
Yes I did reset the network settings last night the phone calls work fine now, But the sms texting still a nogo.
dark4m said:
Yes I did reset the network settings last night the phone calls work fine now, But the sms texting still a nogo.
Click to expand...
Click to collapse
The same problem happened to me, i tried everything..
The only thing that fixed it is:
1. Insert a Sprint SIM card (in my case it came with the device when I baught it. I never had service from sprint and I lived overseas)
2. Select settings >> Network and Internet >> Network settings reset.
3. That is it!
Please note that this method only worked when I inserted Sprint Sim card, it did not work with my actual sim card..
After the settings were reset, I removed Sprint SIM, and inserted the other SIM, and it worked perfectly!
Ialzaben said:
The same problem happened to me, i tried everything..
The only thing that fixed it is:
1. Insert a Sprint SIM card (in my case it came with the device when I baught it. I never had service from sprint and I lived overseas)
2. Select settings >> Network and Internet >> Network settings reset.
3. That is it!
Please note that this method only worked when I inserted Sprint Sim card, it did not work with my actual sim card..
After the settings were reset, I removed Sprint SIM, and inserted the other SIM, and it worked perfectly!
Click to expand...
Click to collapse
This worked once for me, then I had to remove my tray to insert an sd-card and didn't work anymore... network settings struggle to reset (will take 10-20s and then crash out) what could it be? I'm using a heicard and discussing the procedure in this thread: https://forum.xda-developers.com/t/unlocking-lg-g8-sprint-bad-esn.4092771/page-2
UPDATE: if you still get the "SIM not provisioned for voice" message, do a backup, then full restore of the phone, then repeat the above steps. You should now be able to make phone calls, but not connect to LTE. Download an app called "AddAPN" from the play store and manually save the Access Point Name for your carrier (yours will be different from mine, but I'll add it as reference, it's in italian, but you should get the gist, relevant steps are 10 through 14: https://www.helpforsmartphone.com/coopvoce/it/lg/g6/android-8-0/guides/22/Configurare-Internet-LG-G6)
with my sprint lg v50 and i can "Add APN" already.
i dont need an app
@en11gma Are you on android 9 or 10,and what is your security patch level?
Thanks.
When I received my watch last Friday 12st I scanned the sime barcode which came with the E-Sim.
However, I cant make calls or connect to the network without my phone.
The error I get is "Sim is not Provisioned for Voice"
I've googled this and it just says remove the sim and replace but obviously thats not an option on the galaxy watch.
Any suggestions would be much appreciated.
Thanks guys!
Who is your service provider for the Watch?
nunyabiziz said:
Who is your service provider for the Watch?
Click to expand...
Click to collapse
O2. Same as my phone contact
DuncanMummery said:
When I received my watch last Friday 12st I scanned the sime barcode which came with the E-Sim.
However, I cant make calls or connect to the network without my phone.
The error I get is "Sim is not Provisioned for Voice"
I've googled this and it just says remove the sim and replace but obviously thats not an option on the galaxy watch.
Any suggestions would be much appreciated.
Thanks guys!
Click to expand...
Click to collapse
Hi I having same problem. Also with o2.
I had the same issue with ATT. I called and they properly matched the device to the SIM.
DuncanMummery said:
When I received my watch last Friday 12st I scanned the sime barcode which came with the E-Sim.
However, I cant make calls or connect to the network without my phone.
The error I get is "Sim is not Provisioned for Voice"
I've googled this and it just says remove the sim and replace but obviously thats not an option on the galaxy watch.
Any suggestions would be much appreciated.
Thanks guys!
Click to expand...
Click to collapse
I also have the same problem. I'm with O2 on my Phone and Watch eSIM. Did you manage to get this resolved?
I'm from India and I use Airtel as my network, I cannot dial out without the phone and bluetooth, I get the message "cannot connect to network"
Has the UK been able to resolve this issue ? I personally think this must be a network issue / software upgrade ???
Hey all,
I've just been theough 3 months of hell trying to get this resolved through my service provider. Endless factory resets on the watch and clearing all data from the Galaxy Wear app to no avail.
Finally, today after they told me yet again to do a reset, I took the additional step to manually remove the data plan in my watch settings and then selected the option to set up the data plan itself by mirroring what the phone uses.
Finally I had success.
Cheers,
BG
BeeerGutt said:
Hey all,
I've just been theough 3 months of hell trying to get this resolved through my service provider. Endless factory resets on the watch and clearing all data from the Galaxy Wear app to no avail.
Finally, today after they told me yet again to do a reset, I took the additional step to manually remove the data plan in my watch settings and then selected the option to set up the data plan itself by mirroring what the phone uses.
Finally I had success.
Cheers,
BG
Click to expand...
Click to collapse
I have the same problem.. Can you explain to us in detail how you did that? Or is it possible to explain to us the video so that it is a reference for us? Or if there is a video on YouTube explaining to us how to set the clock if we encounter this problem