Database Info

A12s Exynos 850 Development Orange Fox recovery for a12s (Exynos 850)

Orange Fox recovery
MTP working
Built by Roger F
Modified for u2 by @physwizz
U3/U4 in post #2
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Flash multidisabler
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
For rw go to terminal
mount -o rw,remount/system_root
@physwizz

Orange Fox recovery a127f
and a127f DS/N
Built by Roger
mod physwizz
For baseband u3 & u4
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz

Thanks.

TheWorldYT said:
Thanks.
Click to expand...
Click to collapse
I've just had confirmation that the u3/u4 one boots

physwizz said:
I've just had confirmation that the u3/u4 one boots
Click to expand...
Click to collapse
gsi's dont work, even though i did multidisabler it pops up with:
flash to;
boot
super
recovery
(my device a127f)

TheWorldYT said:
gsi's dont work, even though i did multidisabler it pops up with:
flash to;
boot
super
recovery
(my device a127f)
Click to expand...
Click to collapse
and i formatted my data in orange fox too, i don't know why it can't?
but i just reflashed rooted ap and reverted recovery so i don't brick my device

TheWorldYT said:
gsi's dont work, even though i did multidisabler it pops up with:
flash to;
boot
super
recovery
(my device a127f)
Click to expand...
Click to collapse
choose super

physwizz said:
choose super
Click to expand...
Click to collapse
I did that, it doesn't work, after installing it goes into a reboot loop.

I am going to stick to rooted stock for now

TheWorldYT said:
I am going to stick to rooted stock for now
Click to expand...
Click to collapse
Use my wizzROM-creator

physwizz said:
Use my wizzROM-creator
Click to expand...
Click to collapse
OK, will try later

TheWorldYT said:
OK, will try later
Click to expand...
Click to collapse
And my kernel

I confirm that ofox-rog-phy-u4-a12s works on my SM-127F/DSN with the U3 baseband with no issues whatsoever. Mounting, wiping, formatting, backups: everything works. Moreover, the internal multidisabler (called from the terminal) works! Moreover: for the first time I finally could install the phyzwizz kernels from this M12 thread and those work just fine for me, both v3 and v6. Therefore I conclude that SM-127F/DSN is actually internally M12, not A12. I don't know why Samsung chosen to name it A12.

I'll test the Vietnam-made version of SM-127F/DSN a bit later. My previous info is about the India-made version.

uluruman said:
I confirm that ofox-rog-phy-u4-a12s works on my SM-127F/DSN with the U3 baseband with no issues whatsoever. Mounting, wiping, formatting, backups: everything works. Moreover, the internal multidisabler (called from the terminal) works! Moreover: for the first time I finally could install the phyzwizz kernels from this M12 thread and those work just fine for me, both v3 and v6. Therefore I conclude that SM-127F/DSN is actually internally M12, not A12. I don't know why Samsung chosen to name it A12.
Click to expand...
Click to collapse
The build.prop shows that they were originally going to name it a12s
Also the m12 has 90Hz refresh rate
I think they change their collective minds since Oppo already had a12s registered.
I'll ask @Badger50 about having a group just for us

Orange Fox a127f DS/N u4
Built Roger F mod physwizz
Download tar file.
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
https://t.me/a127f_res/4)
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
Reboot, setup phone
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz

A12s Exynos 850 Development A127f Android 12 Recoveries

Orange Fox v2
From @
Modified by physwizz for a12s(a127f) S
Android 12
Installation
Post #3
@physwizz

Afaneh TWRP modified by physwizz
For a12s S
Installation
Post #3
@physwizz

Installing Custom Recoveries Exynos 850
Recommended to use Orange Fox to format and TWRP to install GSIs
1. Install Orange Fox
2. Decrypt the data (Format and run multidisabler twice)
3. Reboot to recovery (not just reboot)
4. Install TWRP recovery.img into recovery partition.
5. Reboot to recovery.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
(For Pitch-black just install the zip)
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with special magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Connect phone to PC
3. Go to Download mode
4. Flash recovery tar into ap with Odin
Part B (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched with the special a217 magisk? (This contains the patched boot.img and vbmeta.img)
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
https://t.me/a127f_res/54
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data, not just wipe?
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
@physwizz

Did anybody have trouble installing these recoveries?

physwizz said:
Did anybody have trouble installing these recoveries?
Click to expand...
Click to collapse
No i downgraded to andro11 but mai binari is: fakin 8

Development [TWRP] [M127] physwizz

physwizz twrp v3
For m127f and f127g
Android 11 , 12 & 13
Extra partitions added
Installation
Post 2
Screenshots
physwizz(Really Old Dev) in Exynos 850 Testing & Development
t.me
Exynos 850 Resources
t.me
physwizz(Really Old Dev) in Exynos 850 Testing & Development
t.me
Code
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
===========================
A12s Channel: https://t.me/a127f_res
A12s group: https://t.me/a12schat
Physwizz group: https://t.me/physwizz3
Physwizz Channel: https://t.me/physwizz2
@physwizz

Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (nor just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz

Question Is there TWRP for SM-A127M U7?

Hello guys, I already have the bootloader unlocked and also root, I need TWRP to download some rom, as you know the phone is not so good for games, also I have One UI Core 5.0, so it is slower.
Any solution?
I also overclocked using Hktweaks, which improved but not that much.

Hello, how did you root? I have been waiting for a stable form for a long time, and I am also waiting for TWRP for Android 12 on the A127M (There are only 11)

Jeison Dg said:
Hello guys, I already have the bootloader unlocked and also root, I need TWRP to download some rom, as you know the phone is not so good for games, also I have One UI Core 5.0, so it is slower.
Any solution?
I also overclocked using Hktweaks, which improved but not that much.
Click to expand...
Click to collapse
I have one

Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (not just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz

physwizz said:
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (not just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
Click to expand...
Click to collapse
SM-A127M
Hi thanks...
I'm new to this, I stayed in this step, could you help me?
I already have an unlocked bootloader, and also root patched with normal magisk (patched with AP, does that mean that I already have boot.img and vbmeta.img patched?, and they are no longer needed?) Is some kind of magisk needed for my device?

I don't understand the methods well, I'm new.
So I would just have to put the twrp file that you left me and flash it by AP with Odin? and that's all? I already have a custom recovery? I don't understand well, sorry.

Jeison Dg said:
SM-A127M
Hi thanks...
I'm new to this, I stayed in this step, could you help me?
I already have an unlocked bootloader, and also root patched with normal magisk (patched with AP, does that mean that I already have boot.img and vbmeta.img patched?, and they are no longer needed?) Is some kind of magisk needed for my device?
Click to expand...
Click to collapse
You must use delta magisk because normal magisk won't patch vbmeta
Root for all Exynos 850 devices.
Root for all Exynos 850 devices. A. Root part 1 - Preparing the file I accept no responsibility for bricked phones but I will help you to recover. 1. Download the exact firmware (including upgrade date) for your device from https://samfrew.com...
forum.xda-developers.com

physwizz said:
Debes usar delta magisk porque magisk normal no parcheará vbmeta
XDA Forums
Android Forum for Mobile Phones, Tablets, Hardware & App Development
forum.xda-developers.com
Click to expand...
Click to collapse
http://

I understand, now how do I get magisk delta?

Jeison Dg said:
I understand, now how do I get magisk delta?
Click to expand...
Click to collapse
Tap on the link in post 7

OK thanks.
so now i type multidisabler twice in advanced, terminal. I reboot the twrp and make a backup and already reboot the device?

broo, I already have twrp but the internal storage does not appear, I already wrote multidisable twice and restarted the twrp

Jeison Dg said:
broo, I already have twrp but the internal storage does not appear, I already wrote multidisable twice and restarted the twrp
Click to expand...
Click to collapse
Did you do factory reset from stock recovery?
Go here
Exynos 850 Resources ]TWRPs] [Kernels]
Devices post#1 Root method post#2 TWRP post#3 Kernels post#4 Debloaters post #5 wizzROM creators post #6 Exynos 850 Devices 1. A12s A127f & A127m 2. M12 M127f & M127g 3. A21s A217f & A217m 4. F12s F127g 5. A13 A135f & A135m 6. M13...
forum.xda-developers.com

Thank you very much, I already have twrp, now I need a custom rom or a gsi and how to install it, any tutorial?

M04 twrp

M04 twrp
MediaTek Helio P35 MT6765
Extra partitions added
No screen time out
Installation Instructions
Post 2
@physwizz
Device Tree
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com

Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Note: some phones may need to be connected a pc or other device to boot to recovery
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp tar file into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
Method 5
If you have already installed recovery and decrypted.
install from system
1. extract recovery.img from tar file
2. open terminal app
3. navigate to folder containing recovery.img
4. type the following
dd if=/sdcard/recovery.img of=/dev/block/by-name/recovery
read t -5;reboot recovery
Method 6
If you have already installed recovery and decrypted.
Try bugjaeger mobile adb-usb otg app from playstore
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
If it doesn't work try this
Physwizz Collection
Decrypt. If multidisabler doesn't work try this method. 1. Copy /vendor/etc/fstab.**** over to another folder. 2. Edit it to remove the line containing the word "encryption" 3. Boot into twrp 4. Use twrp file manager to replace the fstab file with the edited one. 5. Format data (not just...
t.me
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
9.For touch issues use a usb mouse
physwizz(Really Old Dev) in physwizz testing & discussion
If touch doesn't work on twrp, connect a usb mouse Everyone has an old mouse at home and the adapter costs less than a cup of coffee
t.me
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz

Let me know if it boots