Warning: doing this may void warranty. proceed at your own risk, I do not take responsibility for you bricking your phone.
This is a tutorial on how to manually update a red magic 7pro Chinese rom to Global rom. (tested-working)
This should work the other way around as well (global to chinese). (untested)
This should also work on other model red magic phones. (untested)
Software needed:
7zip - https://www.7-zip.org/
Step 1: download latest global rom from red magic
https://help.redmagic.gg/hc/en-us/articles/6360319907865-REDMAGIC-7-Pro
Step 2: Right click on the downloaded global rom and open with 7zip
after opening in 7zip you will have to edit the payload_properties.txt file
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
double click the payload_properties.txt file to open it in notepad
Now you will have to remove the _un
once you remove the _un you have to click file/save.
it should look like this after saving the file.
Now close the file and it will ask you to update the .zip file. click OK
Step 3: Now copy the updated .zip rom to the root drive of your phone.
Step 4: on your phone go into the settings/system update/
click the 3 dots in the upper right hand corner and click local update.
Select the new global rom you just put in your root directory and install.
Step 5: Do not click the reboot after the update is finished. Instead hold down power button and power off.
once the device is powered off hold the volume up and power to boot into recovery.
Wipe / factory data reset.
reboot to new rom.
Couple of notes:
if you do click the reboot after installing the rom, i think everything will be ok. you will just have to power off the phone and reboot into recovery (power button/volume up) as stated above to wipe.
I think this will work for any version of the rom (global/jap/chinese/uk) as long as you edit to the correct country code in the payload_properties.txt file
Thanks for the tutorial CUKIO34.
I will loose root after wiping data and factory reset ?
Marcis-2k said:
Thanks for the tutorial CUKIO34.
I will loose root after wiping data and factory reset ?
Click to expand...
Click to collapse
I do not know, I originally performed this modified rom update on a unrooted phone.
Hello !
Here a mirror link for the firmware (v414): https://mega.nz/file/Lpgl2DoB#rANR7S_k35xfgm4gr4mp1mJsG-wFdpggx6m124s4MuI
Thanks for this tutorial !
To those trying to Switch from CN Rom to Global ROM, please re-consider. I just tried it yesterday and it was successful but very unstable. my phone just bricked FYI
The flashing went smoothly but after wiping data, the device is bootlooping...
I've been using the global rom now for 10 days with no issues. Are you guys using method of pressing the power button + volume up to enter recovery to wipe?
I'm using the 3.14 USA global rom.
Someone posted a link to the Europe 4.14.
CUKIO34 said:
I've been using the global rom now for 10 days with no issues. Are you guys using method of pressing the power button + volume up to enter recovery to wipe?
I'm using the 3.14 USA global rom.
Someone posted a link to the Europe 4.14.
Click to expand...
Click to collapse
Yes, of course. Which recovery do you have (Chinese/English or only English) ? I
evenshop said:
Yes, of course. Which recovery do you have (Chinese/English or only English) ?
Click to expand...
Click to collapse
Chinese/English
CUKIO34 said:
Chinese/English
Click to expand...
Click to collapse
Me too., but after Wiping data, the phones doesn't boot anymore (bootloop). Do you know a way to restore it (adb sideload for instance) ?
evenshop said:
Me too., but after Wiping data, the phones doesn't boot anymore (bootloop). Do you know a way to restore it (adb sideload for instance) ?
Click to expand...
Click to collapse
I haven't tried adb yet.
Was your phone previously rooted?
Can you get to the recovery using the power/ volume up?
CUKIO34 said:
I haven't tried adb yet.
Was your phone previously rooted?
Can you get to the recovery using the power/ volume up?
Click to expand...
Click to collapse
i have managed to reached recovery but because my phone is not rooted, there is no way to inject the Stock China ROM so i can flash the phone. if anyone has any ideas? TWRP doesnt have an img file for NX709J yet
Noveux said:
i have managed to reached recovery but because my phone is not rooted, there is no way to inject the Stock China ROM so i can flash the phone. if anyone has any ideas? TWRP doesnt have an img file for NX709J yet
Click to expand...
Click to collapse
once you reach recovery wipe data and factory reset. It should boot into the new rom if you loaded it correctly.
for my case it doesnt show wipe data and factory, it boots back to fastboot mode each time i reboot.
i ran the boot.img from cmd via fastboot already still no luck.
Let me know if i missed out any steps. my usb debugging is disabled and i cant inject any zip through ADB
My device had been bricked for one month after trying this tutorial. Fortunately I was able to bring it back to life. I just converted the Payload file of the CN Rom into .img files. Then I flashed my device in fastboot mode using the commands that I put in a .bat file. Feel free to DL the folder and try if you are in the same mess I used to be.https://mega.nz/file/tFQUzAzT#_SWNRdVyxIueOl__V4Jxh_P-3IKufw52LMalhTr1b3Q
evenshop said:
My device had been bricked for one month after trying this tutorial. Fortunately I was able to bring it back to life. I just converted the Payload file of the CN Rom into .img files. Then I flashed my device in fastboot mode using the commands that I put in a .bat file. Feel free to DL the folder and try if you are in the same mess I used to be.https://mega.nz/file/tFQUzAzT#_SWNRdVyxIueOl__V4Jxh_P-3IKufw52LMalhTr1b3Q
Click to expand...
Click to collapse
thank you , i flash successful but imei null , i can not download from mega . Please send me .bat . I had china payload
empty.cad said:
thank you , i flash successful but imei null , i can not download from mega . Please send me .bat . I had china payload
Click to expand...
Click to collapse
Here is another link : https://www.swisstransfer.com/d/9ff1b9d3-f6f3-4128-8e61-4433eecc487a
evenshop said:
Here is another link : https://www.swisstransfer.com/d/9ff1b9d3-f6f3-4128-8e61-4433eecc487a
Click to expand...
Click to collapse
Thank so much
empty.cad said:
thank you , i flash successful but imei null , i can not download from mega . Please send me .bat . I had china payload
Click to expand...
Click to collapse
thank you just bricked mine and i used rom installer already has flashbat file and payload all in one
It’s work for Redmagic 7 or only 7 pro ?
Related
This is a little script tool I made up for the Moto E XT1023 The Firmware restore will only work on the XT1023 but all other options should work on all the variants of the Moto E
It is really simple. But requires a unlocked bootloader video HERE If you need help with bootloader unlock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download the Moto E Super Tool
extract the tool to your desktop
Turn on usb debugging mode on the device
install the Motorola drivers
Run the Moto E 1 Moto-E-Restore-XT1023.bat file
then just select what you want to do
1. Root your Moto E
2. Flash TWRP Recovery
3. Flash Stock Android Recovery
4. Flash CWM recovery
5. Remove the unlocked bootloader warning
6. Fully restore the Moto E to stock
7. Fully restore plus Relock the bootloader
Newest release V2
Change Log
Vision 1 first release
Version 2
updated TWRP
Updated Supersu.zip
DOWNLOAD SUPER TOOL
WIll add more to this if i have time
Hope this will help out some noobs
Is it for all the models like xt1021 nd xt1022??
zoneofSAM said:
Is it for all the models like xt1021 nd xt1022??
Click to expand...
Click to collapse
the first line of thread answers your question. variants=models
zoneofSAM said:
Is it for all the models like xt1021 nd xt1022??
Click to expand...
Click to collapse
I have tested it on the xt1023 but from what i am told it should work on all models because supersu.zip is universal and same with TWRP if i am not mistaken.
doesn't reboot into recovery
Everything seems ok during the process but when the phone reboots it stays in the Motorola logo/Android screen, never moving on to TWRP. This also happened when I tried the normal Fastboot method. Bootloader is unlocked and usb debugging is checked, of course.
Any ideas?
edit:
More info-
1. The only command that seems to work on my phone is when I install stock recovery.
2. When I go into bootloader and try to restart in any mode but normal restart I get a blank screen
3. I previously bricked my phone by doing something stupid so I reflashed one of the factory firmwares-
RETUAWS_XT1023_4.4.2_KXC20.82-15_cid9_CFC.xml
Could this be the source of my problem?
Thanks in advance!
Hi,
Thanks for your script, mate...just used it for SuperSu installation and made the rest by other way, but worked flawlessly for that, and that's the point !!! :good:
Cheerz
satanas17 said:
Hi,
Thanks for your script, mate...just used it for SuperSu installation and made the rest by other way, but worked flawlessly for that, and that's the point !!! :good:
Cheerz
Click to expand...
Click to collapse
updated tool with newest twrp and supersu
Cannot upgrade to 4.4.4
Thanks for the nice video; however I just have a problem when trying to go back to stock recovery to install the 4.4.4 update that is recently pushed to Moto E devices; I want to go back to stock recovery as it does not gets installed with any custom recovery.
I tried the said method 4-5 times but it gives me with a dead android icon when trying to get to stock recovery..
Please help me to get 4.4.4 on my device.
Yeah that is normal you have to press volume up and power on that screen to get to options
Tomsgt said:
Yeah that is normal you have to press volume up and power on that screen to get to options
Click to expand...
Click to collapse
Thanks!! it worked for me and I see the options now.. however the update still does not work :crying:
and searching and experimenting to get 4.4.4
_SGY said:
Thanks!! it worked for me and I see the options now.. however the update still does not work :crying:
and searching and experimenting to get 4.4.4
Click to expand...
Click to collapse
Update won't work if you have modded system partition in any way. Even if its just blotware uninstalled. Just flash system partition only and it should work. The .1 .2 .3 file extension files I mean
Deadly said:
Update won't work if you have modded system partition in any way. Even if its just blotware uninstalled. Just flash system partition only and it should work. The .1 .2 .3 file extension files I mean
Click to expand...
Click to collapse
You mean system.img_sparsechunk.0, system.img_sparsechunk.1, system.img_sparsechunk.2 right??
Done that already with no success.. I don't know what I am doing wrong here
No more wallpaper crashes after wipe data and cache
_SGY said:
You mean system.img_sparsechunk.0, system.img_sparsechunk.1, system.img_sparsechunk.2 right??
Done that already with no success.. I don't know what I am doing wrong here
Click to expand...
Click to collapse
Updated Yippeeeeee...
The issue was my rooted device, I had to unroot, install stock ROM as I had removed plenty of bloatware..update success, re-root and enjoy!!!!
Posting steps to benefit someone who may be facing the same issue as I was..
Hey guys. My little brother just got a Moto E, and I'm trying to get it rooted/Recovery'd.
I'm using your toolkit, but so far, no luck. Doesn't want to root, nor install recovery. It's stuck on "waiting for device".
I don't know what's wrong. I checked that USB debugging was on, and he unlocked his bootloader earlier. Everything should be fine.
But, it doesn't work.
Could someone provide some help, please ?
Thanks.
Did you extract the zip to your desktop? And are the right drivers installed also try using a different USB cable or port.
Demonseye said:
Hey guys. My little brother just got a Moto E, and I'm trying to get it rooted/Recovery'd.
I'm using your toolkit, but so far, no luck. Doesn't want to root, nor install recovery. It's stuck on "waiting for device".
I don't know what's wrong. I checked that USB debugging was on, and he unlocked his bootloader earlier. Everything should be fine.
But, it doesn't work.
Could someone provide some help, please ?
Thanks.
Click to expand...
Click to collapse
Did u connected mobile in bootloader ? Try t
sham4u2sam said:
Did u connected mobile in bootloader ? Try t
Click to expand...
Click to collapse
Yeah, I tried it. Weird thing is that we reconnected it to his computer, and the script recognized his phone, while my PC did not. Everything went smooth. Thanks.
Recovery.img is for 4.2(for option stock recovery)
But my moto e is 4.4.4
Will it work???
And also
One advice
Plz include flash stock firmware to your your script
And don't add drivers to in your zip file make a separate link for driver.
Hope you like my suggestions and include it in your next update
Any how i looked your bat file
You looks a good programmer
---------- Post added at 11:01 PM ---------- Previous post was at 10:20 PM ----------
Request for new menu
1.root your phone
2.flash twrp
3.flash stock recovery 4.4.4
4.unlock boot loader(where it only ask to enter unlock key)
5.remove bootloader unlocked warning
6.install stock firmware or rom(where it flash frimware placed in frimware folder)
7.lock your boot loader and install orignal 4.4.4 recovery to get warranty back
Hit thanks if you like to include these options in next update
hard91 said:
Recovery.img is for 4.2(for option stock recovery)
But my moto e is 4.4.4
Will it work???
And also
One advice
Plz include flash stock firmware to your your script
And don't add drivers to in your zip file make a separate link for driver.
Hope you like my suggestions and include it in your next update
Any how i looked your bat file
You looks a good programmer
---------- Post added at 11:01 PM ---------- Previous post was at 10:20 PM ----------
Request for new menu
1.root your phone
2.flash twrp
3.flash stock recovery 4.4.4
4.unlock boot loader(where it only ask to enter unlock key)
5.remove bootloader unlocked warning
6.install stock firmware or rom(where it flash frimware placed in frimware folder)
7.lock your boot loader and install orignal 4.4.4 recovery to get warranty back
Hit thanks if you like to include these options in next update
Click to expand...
Click to collapse
challenge excepted LOL Moto E Super Tool
Your Option 4 isnt going to happen
Because Manu11 didn't update his thread about the toolkit. I decided to post this to help Mi 4i users that got into trouble with TWRP unable to flash dh.harald's CM12.1
FEATURES
-Root (MIUI only, CM users can enable Root in Developer Options) Working on MIUI7 (thanks to @ss.suryakant95 for testing this out)
-TWRP Recovery
-Stock Recovery (just in case)
-EFS (IMEI) Backup and Restore
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD
(Some users had problems unzipping this ZIP with WinRAR, consider using free alternatives such as 7-zip)
MAIN URL: Click here to download (Please use this download, but if in any case you can't extract, you may use the mirror I provided.)
MIRROR: Click here to download.
HOW-TO
1. Enable Developer Options (Tap MIUI version 7 times in About Phone), and then in Developer Options, enable USB debugging.
2. Have you downloaded the ZIP? No? Download it, now.
3. Extract the downloaded ZIP wherever you like, keep in mind that all files must be kept together.
4. Connect your phone to the PC.
5. Run the Start.bat file.
ATTENTION: Please do a ROOT (I'll assume you're still in MIUI) before you flash TWRP, or you may be brought back into stock recovery. (Thanks to @omerjerk for testing this)
---
UPDATE: This toolkit's TWRP is deprecated (download the newest version here), but if you don't want to hassle with downloading another fastboot driver, you can still download dh.harald's recovery .img file, and copy your downloaded recovery to the extracted toolkit folder, then change dh.harald's recovery filename into twrp.img (UNTESTED)
I'll repack this toolkit with dh.harald's newest TWRP whenever possible.
---
This toolkit is made by magdag, all credits goes to him.
i'm getting error on extracting the zip file. can you re-upload plz
aloknand said:
i'm getting error on extracting the zip file. can you re-upload plz
Click to expand...
Click to collapse
don't use winrar...use 7zip to extract
aloknand said:
i'm getting error on extracting the zip file. can you re-upload plz
Click to expand...
Click to collapse
I've provided mirror in OP.
chikebum said:
don't use winrar...use 7zip to extract
Click to expand...
Click to collapse
hey thanks. extracted using 7-zip. :good:
any chance on getting updated twrp recovery or official support of twrp recovery?
milav said:
any chance on getting updated twrp recovery or official support of twrp recovery?
Click to expand...
Click to collapse
I can't speak for magdag, the dev. So, this is literally the version that is usable for flashing TWRP.
I don't expect any official support for TWRP. And I prefer CWM, if there's one.
does any one know to do a nandroid backup with twrp????? mines turning out to be 35mb!
krome_3k said:
does any one know to do a nandroid backup with twrp????? mines turning out to be 35mb!
Click to expand...
Click to collapse
Backup everything (all partitions) except the first in the list.
You may want to use the compression.
The backup should be somewhere between 3.5GB and 5.5GB depending on the options and the data.
You could install ROM Manager (from Koushik Dutta) from the Play Store.
Choose the TWRP as recovery and Unknown Device as device.
Then you can use this to backup with TWRP and it will choose the right options for you.
elot01 said:
Backup everything (all partitions) except the first in the list.
You may want to use the compression.
The backup should be somewhere between 3.5GB and 5.5GB depending on the options and the data.
You could install ROM Manager (from Koushik Dutta) from the Play Store.
Choose the TWRP as recovery and Unknown Device as device.
Then you can use this to backup with TWRP and it will choose the right options for you.
Click to expand...
Click to collapse
bro got my device soft bricked.. i think. the phone boots directly to twrp and twrp is unable to flash the official rom zip which i downloaded from the xiaomi website [miui_MI4iGlobal_V6.6.10.0.LXIMICF_80f20c0908_5.0.zip]. i think the only option i have is to flash a rom via fastboot but the when i download the fastboot rom [http://www.technobuzz.net/flash-miui-6-stable-rom-on-brickeddead-mi-4i-with-fastboot-mode/] nothing happens. i get a 503 error. does anybody out there have the fastboot rom for this device???
EDIT : tried flashing again phones working now but still does anyone have the fastboot rom??
krome_3k said:
bro got my device soft bricked.. i think. the phone boots directly to twrp and twrp is unable to flash the official rom zip which i downloaded from the xiaomi website [miui_MI4iGlobal_V6.6.10.0.LXIMICF_80f20c0908_5.0.zip]. i think the only option i have is to flash a rom via fastboot but the when i download the fastboot rom [http://www.technobuzz.net/flash-miui-6-stable-rom-on-brickeddead-mi-4i-with-fastboot-mode/] nothing happens. i get a 503 error. does anybody out there have the fastboot rom for this device???
EDIT : tried flashing again phones working now but still does anyone have the fastboot rom??
Click to expand...
Click to collapse
Just Google it. Seriously. Or go to MIUI Forums and see the options you got there, there should be plenty of MIUI Fastboot ROM since 6.5.6
Kreaz said:
Just Google it. Seriously. Or go to MIUI Forums and see the options you got there, there should be plenty of MIUI Fastboot ROM since 6.5.6
Click to expand...
Click to collapse
i posted after extensive googling. the only problem i faced was that the fastboot rom was undownloadable. but got the job done using twrp after it failed multiple times.
krome_3k said:
i posted after extensive googling. the only problem i faced was that the fastboot rom was undownloadable. but got the job done using twrp after it failed multiple times.
Click to expand...
Click to collapse
I have 6.6.5.0 as fastboot rom available.
For another person i already made a link available via Dropbox.
Here is the link (will keep it available till the end of the week): https://dl.dropboxusercontent.com/u/63898882/ferrari_global_images_V6.6.5.0.LXIMICF_20150521.0000.3_5.0_global_5ef519a03a.tgz
Thanks
Working like charm on MIUI7
ss.suryakant95 said:
Thanks
Working like charm on MIUI7
Click to expand...
Click to collapse
Is it the root or the twrp flashing?
Kreaz said:
Is it the root or the twrp flashing?
Click to expand...
Click to collapse
Both root and twrp
I've MiUi 6.6.10 on my device.
I used this toolkit to flash twrp but I'm not able to do so.
Whenever I select the 2 option, it flashes the recovery successfully. But, when I boot to recovery again using adb reboot recovery, I get the stock recovery and not twrp.
What I'm doing wrong ?
P.S. I haven't rooted the phone yet.
---------- Post added at 08:21 PM ---------- Previous post was at 08:14 PM ----------
omerjerk said:
I've MiUi 6.6.10 on my device.
I used this toolkit to flash twrp but I'm not able to do so.
Whenever I select the 2 option, it flashes the recovery successfully. But, when I boot to recovery again using adb reboot recovery, I get the stock recovery and not twrp.
What I'm doing wrong ?
P.S. I haven't rooted the phone yet.
Click to expand...
Click to collapse
It worked after root.
I think it should be added in the main post that root is required.
Hi
Not able to restore stock recovery with the toolkit. I've tried to flash stock.img manually in fastboot., but not able to get into stock recovery even fastboot show succeeded.
elot01 said:
I have 6.6.5.0 as fastboot rom available.
For another person i already made a link available via Dropbox.
Here is the link (will keep it available till the end of the week): https://dl.dropboxusercontent.com/u/63898882/ferrari_global_images_V6.6.5.0.LXIMICF_20150521.0000.3_5.0_global_5ef519a03a.tgz
Click to expand...
Click to collapse
sorry bro i missed the download can u reupload it please???
krome_3k said:
sorry bro i missed the download can u reupload it please???
Click to expand...
Click to collapse
I am at work at the moment, so you wil have to wait until tonight.
For those who are having a hard time flashing TWRP using a PC, I just wanna share it to you guys! I have tested this myself on my Mi-4c
Note: This will not might not work if you are using stable/dev rom version 6.14 or higher due to locked bootloader. Please unlock your bootloader first
Requirements:
Mi-4c device
Full Developer ROM pack for our phone ( make sure you install GApps too)
TWRP image (TWRP 2.8.7.1 with English and Chinese V2 & V3)
TWRP Recovery 2.8.7.0 Dev ROM (Most Stable)
Flashify App
**And of course, courage and common sense
Disclaimer: Don't blame me if you brick your device, do it at your own risk.
1. Download a developer ROM from the official download page: Click Here or use this Developer ROM [/B]Note: This method might not work if you are using dev rom version 6.14 or higher due to locked bootloader. Please unlock your bootloader first[/B]
2. Flash the Developer ROM from the updater app and install GApps of course. Now, you should have root access on your phone.
3. Download the flashable TWRP zip from the original thread or below - Original TWRP Thread --- Thanks to 油炸包子-
TWRP Recovery 2.8.7.0 Dev ROM (Most stable especially for touch issues)
TWRP V2 Dev ROM Only
TWRP V3 Dev ROM or Stable
4. Open the TWRP .zip or .7z file you downloaded using an Archiver app or ES Explorer and you will find a recovery.img inside.
4.1 Extract the recovery.img to the root of your SDCard (you can rename it to anything you like just make sure the extension stays as .img)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Install Flashify from Playstore.
5.1 Launch the app, accept disclaimer then you will get a message that it needs root access.
5.2 Launch the Security app and provide root permission to Flashify.
6. After providing root permission to flashify, launch the app again and select Recovery image from the Flash tab, choose the extracted ".img" file that you have extracted to your SDCard then flash.
7. There should be a success "Flash complete" message then select "Reboot now" to reboot your phone.
Congratulations!! You should now have TWRP after reboot.
*****Access TWRP by powering the phone off, turn it back on by holding the power together with the volume up (+) button and it should take you to the TWRP screen if a few sec.*****
Want to update to TWRP V3? Follow the steps below:
Do this if you have the previous version (TWRP V2) installed, else, follow the steps above to get V3 directly.
Should you wish to update to the latest TWRP from the original thread: http://en.miui.com/thread-169401-1-1.html
1. Download the latest TWRP from your mobile: -
TWRP V3 Dev ROM or Stable
2. Extract the ".img" file, depends which ROM you're on if Developer or Stable.
3. Save it to the root of your SDCard
4. Boot your phone to recovery (Power & Volume (+) Up
5. Once on TWRP screen, select Install, from there you will need to select "Install Image" lower right, navigate to the root of your SDCard and select the ".img" you have previously extracted (TWRP V3), select "recovery" not boot, then Slide to Flash the new version.
Congrats! You have successfully updated your TWRP to V3.
Disclaimer: Don't blame me if you brick your device, do it at your own risk.
My original thread: Flash TWRP using Flashify App - No PC Needed (Dev ROM only)
great ! this is really easy even for noobs like me
ps2lover said:
great ! this is really easy even for noobs like me
Click to expand...
Click to collapse
Let us know if it works for you too. Thanks!
I flashed the TWRP, thanks for the help (Y). But where or how can I install GApps?
gmark247 said:
I flashed the TWRP, thanks for the help (Y). But where or how can I install GApps?
Click to expand...
Click to collapse
Just download the google apps from the mi store if u r using miui rom.
Hey! tnx 4 twrp, but touchscreen do not respond in recovery at all.
Is there anyway to fix it?
ILLnar said:
Hey! tnx 4 twrp, but touchscreen do not respond in recovery at all.
Is there anyway to fix it?
Click to expand...
Click to collapse
You'll have to wait about 2 mins then it starts working
You'll have to wait about 2 mins then it starts working
Click to expand...
Click to collapse
So, you mean this is normal behavior?
In my opinion, it's not.
ILLnar said:
So, you mean this is normal behavior?
In my opinion, it's not.
Click to expand...
Click to collapse
It shouldn't be like that, but that's how it is right now. I'm not sure if there's any fix available, but I guess an updated version of the recovery will be released soon, that has this problem fixed..
Yeah this method works I have done it and easy as drinkin beer
Sent from my Mi-4c using Tapatalk
Same here. Tested and working. I am on Mokee rom now.
Thanks for the guide but I found something wierd happening. After succesfully flashing twrp and rebooting it goes in twrp when I restart after that and try to go in recovery with volume up +power it takes me to stock recovery? Any ideas??:/
So version 3 works without any touch problems?
ermacwins said:
So version 3 works without any touch problems?
Click to expand...
Click to collapse
I'm using the v3 linked in this thread and the touch problem still exists. I have to wait 2-3 minutes before it works.
I tested the 2.8.7.0 version from miui.com and touch screen worked immediately. I'm not sure if it was just lucky or not, because I only tested it once. Maybe worth trying it and see how it works?
It'd weird because the one I have some times freezes and some times doesn't
b3ava said:
Thanks for the guide but I found something wierd happening. After succesfully flashing twrp and rebooting it goes in twrp when I restart after that and try to go in recovery with volume up +power it takes me to stock recovery? Any ideas??:/
Click to expand...
Click to collapse
Just reflash TWRP then reboot to TWRP, it should ask you if you want to either use it as read only or allow modification, select allow modification. Hope that helps.
Yes with the modded version on xiaomi.eu the touch works!
Bazzu said:
Yes with the modded version on xiaomi.eu the touch works!
Click to expand...
Click to collapse
Hm, I can't seem to find it. Do you mind posting the link to it?
Flaxe said:
Hm, I can't seem to find it. Do you mind posting the link to it?
Click to expand...
Click to collapse
https://mega.nz/#!VB02nZhQ!Slu89_5CHV-5WnH3hBVNlrKB9uqZv-pS3Kmgmtmaw48
Sent from my Xiaomi-mi4c
If i've been useful > "Thanks" ^^
Bazzu said:
https://mega.nz/#!VB02nZhQ!Slu89_5CHV-5WnH3hBVNlrKB9uqZv-pS3Kmgmtmaw48
Sent from my Xiaomi-mi4c
If i've been useful > "Thanks" ^^
Click to expand...
Click to collapse
Yup, this version of TWRP 2.8.7.0 should be fine with touch problems, this one i'm using now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tested Working on A750F, A750FN, A750G and A750GN - 22/03/20
This Guide is outdated now..
It "ONLY" works on the initial One UI 2 update that started rolling out in March 2020
It has issues on the june patch. So "DO NOT" report bugs if you are on the june patch.
Use this at your own risk. I am not responsible for any damage that may happen to your device.
Make sure to have the official firmware downloaded for your device in case anything goes wrong.
This will void your warranty
This will also trip the knox counter.
Installation Guide
1. Unlock The bootloader
2. Boot into download mode
3. Using Odin, Flash Magisk_patched_boot.tar in the "AP" Slot.
4. Reboot download and flash Twrp recovery using odin in AP slot.
5. Reboot to TWRP and "FORMAT" , not wipe the data.
6. Flash Magisk-v20.3.zip
7. Reboot to download and flash Officialrecovery.tar in "AP" slot.
8. Reboot your device.
DOWNLOADS
Magisk Boot Img - http://www.mediafire.com/file/m9dwiww6i492xl6/Magisk_patched_boot.tar/file
Official recovery - http://www.mediafire.com/file/nhrj8060rbv43rm/Officialrecovery.tar/file
Notes:
1. Only Magisk v20.3 is tested, other versions may/may not work. Report if other versionswork, I will update OP.
2.This "WILL NOT" install Twrp on your device as Twrp is not updated and it will cause bootloops.
3. Failing to follow and steps mentioned above, you will end up in a bootloop.
Please DO NOT Share direct link to these files, Share The link to this post.
Feedback is Highly appreciated
Hit the Thanks Button
Credits:
Me for finding this method
@ashyx for Building Twrp
And Teamwin
Download link ??
Kumarranveer_RK said:
Download link ??
Click to expand...
Click to collapse
I just realized that xda did not upload the files due to size limit, I have updated OP.. Check it
These files work on the A750G/DS. Or they're just for the F version
JHAM2005 said:
These files work on the A750G/DS. Or they're just for the F version
Click to expand...
Click to collapse
They are confirmed working on A750F and A750GN, if possible, try and report for A750G
Thanks bro .. rooted my a7 2018 (Android Q) .. No issues Till now
well i did flash magisk patched boot, and succesfully flashed TWRP,
but i get this weird problem in twrp part, where my internal storage shows 0 MB in twrp.
and rebooting it, device goes into download mode all by itself.
what should i do now? wipe the internal storage or format it by Writing yes.?
nanodroid.cyberbot said:
well i did flash magisk patched boot, and succesfully flashed TWRP,
but i get this weird problem in twrp part, where my internal storage shows 0 MB in twrp.
and rebooting it, device goes into download mode all by itself.
what should i do now? wipe the internal storage or format it by Writing yes.?
Click to expand...
Click to collapse
Its mentioned in the op please read it carefully format it by typing yes. And install magisk zip from sd card
Can we use the TWRP 3.2.3-1 listed here: https://forum.xda-developers.com/galaxy-a7/development/recovery-twrp-3-2-3-1-galaxy-a7-2018-t3876798
You did not give a link to which TWRP version you used. So just asking.
sameermanas said:
Can we use the TWRP 3.2.3-1 listed here: https://forum.xda-developers.com/galaxy-a7/development/recovery-twrp-3-2-3-1-galaxy-a7-2018-t3876798
You did not give a link to which TWRP version you used. So just asking.
Click to expand...
Click to collapse
No other twrp is available for our device.. So, yes this one
thanks! work like a charm
I downloaded the Indian version and installed it on an a750 FN and it works ....
I will keep trying more things
good job
Delete
The Root works perfectly on the A750G/DS, the only thing that does not work properly is the TWRP, does not recognize the internal memory, only recognizes the SD card
PD... An Official Recovery query is only for version F and GN or also works in G/DS versions
how could I return my battery at the original state? Im having fast drain ..
Hi! I have followed the steps correctly and rooted my Samsung Galaxy A7 2018. However, whenI restart my device, it always got stuck on download mode. Any help I can get?
Equinoxx17 said:
Hi! I have followed the steps correctly and rooted my Samsung Galaxy A7 2018. However, whenI restart my device, it always got stuck on download mode. Any help I can get?
Click to expand...
Click to collapse
This happens when you don't flash magisk zip file, did u flash that after installing twrp? And after that did u install stock recovery? Try this, if it does not work, start from scratch again.
KChoudhry said:
This happens when you don't flash magisk zip file, did u flash that after installing twrp? And after that did u install stock recovery? Try this, if it does not work, start from scratch again.
Click to expand...
Click to collapse
I did flash magisk after installing TWRP. I also installed the stock recovery. But still, it goes back to download mode when I restart my phone.
Equinoxx17 said:
I did flash magisk after installing TWRP. I also installed the stock recovery. But still, it goes back to download mode when I restart my phone.
Click to expand...
Click to collapse
You need to start from scratch then
KChoudhry said:
You need to start from scratch then
Click to expand...
Click to collapse
I guess I'll be staying at Android Pie for now. I think I'll be waiting for other alternatives that doesn't boot into download mode when restarted. Somehow, I thank you for sharing info on how to root Samsung Galaxy A7 2018.
Hello, i am totaly stucked pls need help. first things first bought poco f2 pro like 1 week ago and yesterday i tried to install xiaomi eu rom, ofc there were errors, and it wasnt possible to go back to stock rom,(i am so stupid i didnt create backup but i was so sure with myself because i was also doing this proces with poco f1 )
SO WHAT I TRIED:
1. flashing newest rom with miflash 20200314 and also older version ( first time it worked , then i had confidence in this "repair process" will work forever and it was mistake)
after i flashed that stock rom then i tried to install miuieu again and again failed in installing so i tried to use miflash for flashing again but i got 2 errors first was antiroolback which ai fixed with editing script with notepad ( deleted antirollab rows and saved) next one was CRClist which i didnt find any working solution
2. adb sideloading vendor V12.0.4.0.QJKIDXM GLOBAL + firmware V12.2.1.0.RJKMIXM GLOBAL + rom dont work got some errors or wasnt booting properly
3. tried to root with twrp 3.4.2b LR twrp by wzsx150 which ofc didnt work because i dont have acces to system
4. adb sideloading rom
5. formated data 30x wiped all rapaired partitions
what i didnt try
flashing beta android 11 i think ( which i could find because only 1 workingin i found wasnt working
Not sure if i skipped something / did somehting wrong i would appreciate to someone really skilled to use TEAMVIEWER so you can connect on me and we can together figure it out because i am out of ideas, trying to repair this phone like 20 hours and still not working. Thx!!!!!!!!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ALSO not sure with this is supe r8+ GB big and also firmwave etc when i wiped all and formated data also
Twrp, currently cannot restore backups .
I guess from the post that the phone is a global version?
Try to flash the rom that was on your phone when you bought it with Miflash(option CLEANALL).
if it doesn't work try V11.0.2.0.QJKMIXM. if version global.
NOSS8 said:
Twrp, currently cannot restore backups .
I guess from the post that the phone is a global version?
Try to flash the rom that was on your phone when you bought it with Miflash(option CLEANALL).
if it doesn't work try V11.0.2.0.QJKMIXM. if version global.
Click to expand...
Click to collapse
i wasnt trying to restore backup just opened backup folder to check size of directories and there was SUPER is 8,7 GB so i think somehting is flashed and i cant remove it
Twrp format data,reboot twrp wipe all(except OTG),reboot FASTBOOT
flash the rom that was on your phone when you bought it with Miflash(option CLEANALL).
NOSS8 said:
Twrp, currently cannot restore backups .
I guess from the post that the phone is a global version?
Try to flash the rom that was on your phone when you bought it with Miflash(option CLEANALL).
if it doesn't work try V11.0.2.0.QJKMIXM. if version global.
Click to expand...
Click to collapse
any way how to be 100% sure what rom it had when i bough it ? i am 99% sure that was global
Failed to mount these partitions
NOSS8 said:
Twrp format data,reboot twrp wipe all(except OTG),reboot FASTBOOT
flash the rom that was on your phone when you bought it with Miflash(option CLEANALL).
Click to expand...
Click to collapse
as i said mi flash dont work
Is the phone detected by the PC ?
NOSS8 said:
Is the phone detected by the PC ?
Click to expand...
Click to collapse
yes ofcourse it always stop at CRCLisst error
Miflash indicates an antiroolback error, because the version you are trying to flash is not the correct one.
NOSS8 said:
Miflash indicates an antiroolback error, because the version you are trying to flash is not the correct one.
Click to expand...
Click to collapse
i send you Privatre message
Phreak0101 said:
yes ofcourse it always stop at CRCLisst error
Click to expand...
Click to collapse
Rename the file miu123(short name without space) for example and put it in the same directory than miflash
NOSS8 said:
Rename the file miu123(short name without space) for example and put it in the same directory than miflash
Click to expand...
Click to collapse
Connect on me with teamviewer my brain hurts from this Nothing dont work
Phreak0101 said:
Failed to mount these partitions
Click to expand...
Click to collapse
You tried to install EU rom weekly or stable?
NOSS8 said:
You tried to install EU rom weekly or stable?
Click to expand...
Click to collapse
stable
right now i am downloading V11.0.2.0.QJKMIXM version Type: Fastboot
There is no problem with the stable, you must have made a mistake somewhere.
MIflash is the only way to get your phone back.
Phreak0101 said:
right now i am downloading V11.0.2.0.QJKMIXM version Type: Fastboot
Click to expand...
Click to collapse
Dont forget to Rename the file (short name without space)V1102 for example and put it in the same directory than miflash .
NOSS8 said:
There is no problem with the stable, you must have made a mistake somewhere.
MIflash is the only way to get your phone back.
Click to expand...
Click to collapse
i know, few mins ago i tried to root and it seems it worked but now i cant unroot it + now i have failed to mount
/system root
/vendor
/product
/odm