Database Info

Flash TWRP using Flashify App - No PC Needed (Dev ROM only)

For those who are having a hard time flashing TWRP using a PC, I just wanna share it to you guys! I have tested this myself on my Mi-4c
Note: This will not might not work if you are using stable/dev rom version 6.14 or higher due to locked bootloader. Please unlock your bootloader first
Requirements:
Mi-4c device
Full Developer ROM pack for our phone ( make sure you install GApps too)
TWRP image (TWRP 2.8.7.1 with English and Chinese V2 & V3)
TWRP Recovery 2.8.7.0 Dev ROM (Most Stable)
Flashify App
**And of course, courage and common sense
Disclaimer: Don't blame me if you brick your device, do it at your own risk.
1. Download a developer ROM from the official download page: Click Here or use this Developer ROM [/B]Note: This method might not work if you are using dev rom version 6.14 or higher due to locked bootloader. Please unlock your bootloader first[/B]
2. Flash the Developer ROM from the updater app and install GApps of course. Now, you should have root access on your phone.
3. Download the flashable TWRP zip from the original thread or below - Original TWRP Thread --- Thanks to 油炸包子-
TWRP Recovery 2.8.7.0 Dev ROM (Most stable especially for touch issues)
TWRP V2 Dev ROM Only
TWRP V3 Dev ROM or Stable
4. Open the TWRP .zip or .7z file you downloaded using an Archiver app or ES Explorer and you will find a recovery.img inside.
4.1 Extract the recovery.img to the root of your SDCard (you can rename it to anything you like just make sure the extension stays as .img)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Install Flashify from Playstore.
5.1 Launch the app, accept disclaimer then you will get a message that it needs root access.
5.2 Launch the Security app and provide root permission to Flashify.
6. After providing root permission to flashify, launch the app again and select Recovery image from the Flash tab, choose the extracted ".img" file that you have extracted to your SDCard then flash.
7. There should be a success "Flash complete" message then select "Reboot now" to reboot your phone.
Congratulations!! You should now have TWRP after reboot.
*****Access TWRP by powering the phone off, turn it back on by holding the power together with the volume up (+) button and it should take you to the TWRP screen if a few sec.*****
Want to update to TWRP V3? Follow the steps below:
Do this if you have the previous version (TWRP V2) installed, else, follow the steps above to get V3 directly.
Should you wish to update to the latest TWRP from the original thread: http://en.miui.com/thread-169401-1-1.html
1. Download the latest TWRP from your mobile: -
TWRP V3 Dev ROM or Stable
2. Extract the ".img" file, depends which ROM you're on if Developer or Stable.
3. Save it to the root of your SDCard
4. Boot your phone to recovery (Power & Volume (+) Up
5. Once on TWRP screen, select Install, from there you will need to select "Install Image" lower right, navigate to the root of your SDCard and select the ".img" you have previously extracted (TWRP V3), select "recovery" not boot, then Slide to Flash the new version.
Congrats! You have successfully updated your TWRP to V3.
Disclaimer: Don't blame me if you brick your device, do it at your own risk.
My original thread: Flash TWRP using Flashify App - No PC Needed (Dev ROM only)

great ! this is really easy even for noobs like me

ps2lover said:
great ! this is really easy even for noobs like me
Click to expand...
Click to collapse
Let us know if it works for you too. Thanks!

I flashed the TWRP, thanks for the help (Y). But where or how can I install GApps?

gmark247 said:
I flashed the TWRP, thanks for the help (Y). But where or how can I install GApps?
Click to expand...
Click to collapse
Just download the google apps from the mi store if u r using miui rom.

Hey! tnx 4 twrp, but touchscreen do not respond in recovery at all.
Is there anyway to fix it?

ILLnar said:
Hey! tnx 4 twrp, but touchscreen do not respond in recovery at all.
Is there anyway to fix it?
Click to expand...
Click to collapse
You'll have to wait about 2 mins then it starts working

You'll have to wait about 2 mins then it starts working
Click to expand...
Click to collapse
So, you mean this is normal behavior?
In my opinion, it's not.

ILLnar said:
So, you mean this is normal behavior?
In my opinion, it's not.
Click to expand...
Click to collapse
It shouldn't be like that, but that's how it is right now. I'm not sure if there's any fix available, but I guess an updated version of the recovery will be released soon, that has this problem fixed..

Yeah this method works I have done it and easy as drinkin beer
Sent from my Mi-4c using Tapatalk

Same here. Tested and working. I am on Mokee rom now.

Thanks for the guide but I found something wierd happening. After succesfully flashing twrp and rebooting it goes in twrp when I restart after that and try to go in recovery with volume up +power it takes me to stock recovery? Any ideas??:/

So version 3 works without any touch problems?

ermacwins said:
So version 3 works without any touch problems?
Click to expand...
Click to collapse
I'm using the v3 linked in this thread and the touch problem still exists. I have to wait 2-3 minutes before it works.
I tested the 2.8.7.0 version from miui.com and touch screen worked immediately. I'm not sure if it was just lucky or not, because I only tested it once. Maybe worth trying it and see how it works?

It'd weird because the one I have some times freezes and some times doesn't

b3ava said:
Thanks for the guide but I found something wierd happening. After succesfully flashing twrp and rebooting it goes in twrp when I restart after that and try to go in recovery with volume up +power it takes me to stock recovery? Any ideas??:/
Click to expand...
Click to collapse
Just reflash TWRP then reboot to TWRP, it should ask you if you want to either use it as read only or allow modification, select allow modification. Hope that helps.

Yes with the modded version on xiaomi.eu the touch works!

Bazzu said:
Yes with the modded version on xiaomi.eu the touch works!
Click to expand...
Click to collapse
Hm, I can't seem to find it. Do you mind posting the link to it?

Flaxe said:
Hm, I can't seem to find it. Do you mind posting the link to it?
Click to expand...
Click to collapse
https://mega.nz/#!VB02nZhQ!Slu89_5CHV-5WnH3hBVNlrKB9uqZv-pS3Kmgmtmaw48
Sent from my Xiaomi-mi4c
If i've been useful > "Thanks" ^^

Bazzu said:
https://mega.nz/#!VB02nZhQ!Slu89_5CHV-5WnH3hBVNlrKB9uqZv-pS3Kmgmtmaw48
Sent from my Xiaomi-mi4c
If i've been useful > "Thanks" ^^
Click to expand...
Click to collapse
Yup, this version of TWRP 2.8.7.0 should be fine with touch problems, this one i'm using now.

S7 International g930f - Cant install Stock Boot Image after Frp Unlock & More

Hey Xda,
I have an S7 International G930f and the stock boot image wont flash in odin without bootloop, after frp unlock. So basically ive flashed the G930F(ENGroot) file, but the second part, flashing the boot img isnt flashing without bootloop.
So yeah- my phone is acting weird, im surprised it even works.
Running Stock Rooted 6.0.1 with TWRP
I've rooted/recoveried many a Samsung, but all this Dmverity, FRP unlock, these newer protocols have me confused.
I've got OEM unlock ON which is still a tad new to me-coming from S5. Unknown Sources Enabled. FRP Lock shows as OFF.
I've followed an FRP unlock guide-XDA here but the boot image wont take. Tried many times. Maybe its my July 1st Security patch?
Can someone tell me what i need to do to get this phone to where it is FRP unlocked, dmverity gone,keep root/recovery and update it?
p.s. I'm getting tons of bugs, random reboots, and WiFi passwords aren't saved on reboot. Plz help!
Thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Read the main post in the TWRP thread in the development forums, all instructions in there

*Detection* said:
Read the main post in the TWRP thread in the development forums, all instructions in there
Click to expand...
Click to collapse
Thanks for the reply. If you are referring to this thread http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770 thats what i followed.
But i did have some confusion about this section below from said thread. Im not sure what OP means by "if you only want a bootable system partition". Of course i would like this to be bootable, AND i would like to install SuperSU.
Its worded strange. Ok lets assume i did this incorrectly. Would you suggest i start over, factory wipe, then move forward with that threads directions?
If twrp and super su are already installed and working, but i dont have the right boot.img flashed, should i start all over or start somewhere in particular?
10. If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
You will need an external SDcard for this method, if you don't have one you will have to use adb sideload to install SuperSU.
If you only want a bootable system partition:
Download the latest dm-verity and force encryption disabler zip.
Without exiting TWRP, transfer the no-verity-opt-encrypt zip to your device over MTP* and flash it using [Install] in TWRP.
Note: This does not disable the forced encryption on Bxxx firmware, only Axxx firmware due to a change in vold by Samsung.
Click to expand...
Click to collapse

dovedescent7 said:
Thanks for the reply. If you are referring to this thread http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770 thats what i followed.
But i did have some confusion about this section below from said thread. Im not sure what OP means by "if you only want a bootable system partition". Of course i would like this to be bootable, AND i would like to install SuperSU.
Its worded strange. Ok lets assume i did this incorrectly. Would you suggest i start over, factory wipe, then move forward with that threads directions?
If twrp and super su are already installed and working, but i dont have the right boot.img flashed, should i start all over or start somewhere in particular?
Click to expand...
Click to collapse
"if you only want a bootable system partition" means if you don't want to flash SuperSU, but want your phone to boot correctly with TWRP installed, if you don't follow that step, regardless of SuperSU, your phone is a soft brick
Flash TWRP
Wipe Data (Yep, to disable encryption, so backup first)
Flash DM-Verity~zip
Flash Super-SU.zip
Reboot
More in depth here
http://www.droidorigin.com/root-samsung-galaxy-s7/

*Detection* said:
"if you only want a bootable system partition" means if you don't want to flash SuperSU, but want your phone to boot correctly with TWRP installed, if you don't follow that step, regardless of SuperSU, your phone is a soft brick
Flash TWRP
Wipe Data (Yep, to disable encryption, so backup first)
Flash DM-Verity~zip
Flash Super-SU.zip
Reboot
More in depth here
http://www.droidorigin.com/root-samsung-galaxy-s7/
Click to expand...
Click to collapse
hey man i do appreciate it. Thank you for confiriming,the above link worked! thank you!!!!!!!!

dovedescent7 said:
hey man i do appreciate it. Thank you for confiriming,the above link worked! thank you!!!!!!!!
Click to expand...
Click to collapse
:good:

[TOOL][DAISY] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the Xiaomi Mi A2 Lite's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

Yay ^_^ Thanks for the efforts Respected devs. Hope it makes life way easier for people here at the community ^_^

unlock bootloader and root still delete all of my files right?

machine1104 said:
unlock bootloader and root still delete all of my files right?
Click to expand...
Click to collapse
Yes

Xiaomi Mi A2 Lite got messed up
Hi there!
I have just received my new Xiaomi Mi A2 Lite phone and wanted to pass all of my data from my old phone to it in a way that it was required to be rooted.
KingRoot didn't work on this new phone, so I unlocked bootloader and tried to install TWRP recovery on my phone.
Installing to the recovery partition did not work. I searched the error it gave me and found a thread saying that flashing it to the boot partition worked for them. So I did. Next thing that happened is that my phone did not boot into the OS (operating system) ever again. It only booted TWRP.
I have since been able to remove TWRP (though I made a back up of it) but the phone still stays on just the loading part before going to the OS.
I have since been able to get back the fastboot and stock recovery, but the phone will not start into the OS anymore.
How can I fix this?
I have been searching for ways to restore my android to the 8.1 Oreo version that it was.
Can I do it with this Tool All In One? Please help! Thank you in advance!! Much appreciated!!

hello
i have unlocked bootloader and wait for TWRP and want to root my phone.
Can I flash TWRP and root with this tool easy? And will I lost all data if do that?

chillout23 said:
hello
i have unlocked bootloader and wait for TWRP and want to root my phone.
Can I flash TWRP and root with this tool easy? And will I lost all data if do that?
Click to expand...
Click to collapse
If you need to flash twrp and root.no, you will not lose data

Ok. Thank you very much for answer
Then will try

chillout23 said:
Ok. Thank you very much for answer
Then will try
Click to expand...
Click to collapse
I would suggest using the root method mentioned here
https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
Twrp does not have good results for most people.

With this method I will lost all data on my phone and I do not want to setup phone 1 more time. Twice was just enough
I know that already but thank you anyway

chillout23 said:
With this method I will lost all data on my phone and I do not want to setup phone 1 more time. Twice was just enough
I know that already but thank you anyway
Click to expand...
Click to collapse
If your bootloader is unlocked, you should not lose any data just installing magisk

Yes...my fault. My BL is unlocked already.
But I posted in that thread...because of some reason does not work. But this is not thread about it
Thanks for help

So...Installed TWRP but does not recognize anything in internal storage. Not recognize SD card.
When boot again to TWRP goes to "something"...some kind of empty stock recovery with android logo and nothing more.
Oh man...that will be interesting ride...to put TWRP or root device

chillout23 said:
So...Installed TWRP but does not recognize anything in internal storage. Not recognize SD card.
When boot again to TWRP goes to "something"...some kind of empty stock recovery with android logo and nothing more.
Oh man...that will be interesting ride...to put TWRP or root device
Click to expand...
Click to collapse
Because your not supposed to install the twrp image just boot from it and if you do install it then you have to flash the original boot image for which ever 8.1 update your on to get rid of it.
This is explained on the team win page for daisy wish i had read that first after re flashing my os twice and boot image once trying to install this am just using the phone as is for now until i get the urge to try again

uptowner said:
Because your not supposed to install the twrp image just boot from it and if you do install it then you have to flash the original boot image for which ever 8.1 update your on to get rid of it.
This is explained on the team win page for daisy wish i had read that first after re flashing my os twice and boot image once trying to install this am just using the phone as is for now until i get the urge to try again
Click to expand...
Click to collapse
This tool can only boot the recovery or can boot the recovery and automatic flash the installer, i'm not udnerstanding which is the problem

uptowner said:
Because your not supposed to install the twrp image just boot from it
Click to expand...
Click to collapse
Installed TWRP image. I know what is .img

mauronofrio said:
This tool can only boot the recovery or can boot the recovery and automatic flash the installer, i'm not udnerstanding which is the problem
Click to expand...
Click to collapse
oops sorry i should check what thread this is before trying to answer a question i blame alcohol .
Thing is there are posts out on the net that advices people with the a2 lite to install the twrp image to their inactive slot and not to just boot it and that's where things seem to start going wrong.
This has absolutely nothing to do with this tool and sorry i just dived in here and confused people.
maybe some kind passing mod will get rid of the post apologies again

Hi, I bought this device one weeks ago. I wanna flash new android pie OTA update. I dont know how to use this program exactly and I dont wanna lose my data and deal with brick risk.
I understood only one thing from other websites:I must use sideload method .Can someone guide me?Actually I have experience from my old devices(Note 4, Lg optimus, Xperia P) but this is new. I dont wanna broke it immediately .XD.

mesuahas said:
Hi, I bought this device one weeks ago. I wanna flash new android pie OTA update. I dont know how to use this program exactly and I dont wanna lose my data and deal with brick risk.
I understood only one thing from other websites:I must use sideload method .Can someone guide me?Actually I have experience from my old devices(Note 4, Lg optimus, Xperia P) but this is new. I dont wanna broke it immediately .XD.
Click to expand...
Click to collapse
Read the op follow it exactly how it says if u don't know something research it.i have root with no problems if u do as the op says u shouldn't have no problems

Will this work on pie at all?

Bring to life and not delete all

I was rooted on 9.5.4 with the Patched Boot Image. I had 2 modules enabled in magisk (call recording and substratum). Wanted to update to 9.5.5 and did this:
1. Download and install update
2. No reboot
3. Open Magisk and disable the modules
4. Select Install install and then Install to Inactive Slot (After OTA)
5. Rebooted
6. Phone booted so I opened magisk and enabled my modules
7. Rebooted
Now the phone doesn't boot up properly. It goes all the way to first screen asking for my passcode and then turns off and does to stock recovery. Please someone tell me what to do so I don't lose my data!!

Install TWRP, install stock image.

"Bring to life and not delete all" - Are you Thanos?

djsubterrain said:
"Bring to life and not delete all" - Are you Thanos?
Click to expand...
Click to collapse
If I was I would turn a lot of people to ash...
But as for my phone since I was offline the world for 3 hours and got no answers I decided to try to flash stock boot.img
After flashing it in fastboot phone booted up normally and I have everything. Now I'm on 9.5.5 and want to root the phone... Should I go with the TWRP method? I was thinking to delay to flash TWRP since it isn't stable yet. If I open Magisk in phone and select install and then again install and then select option "Select and patch a file" and select boot.img, will it work?

eltarod said:
If I was I would turn a lot of people to ass...
But as for my phone since I was offline the world for 3 hours and got no answers I decided to try to flash stock boot.img
After flashing it in fastboot phone booted up normally and I have everything. Now I'm on 9.5.5 and want to root the phone... Should I go with the TWRP method? I was thinking to delay to flash TWRP since it isn't stable yet. If I open Magisk in phone and select install and then again install and then select option "Select and patch a file" and select boot.img, will it work?
Click to expand...
Click to collapse
"I would turn a lot of people to ass..."
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The TWRP version is stable enough for use just now. I would flash the rooted boot image (You will lose wifi if you're on 9.5.5) and then flash TWRP installer along with flashing magisk again, then download one of the kernels provided (I'm using ElementalX on 9.5.5 and it's working fine) and flash that in TWRP, then you should have TWRP, root and working wifi, etc.

djsubterrain said:
"I would turn a lot of people to ass..."
The TWRP version is stable enough for use just now. I would flash the rooted boot image (You will lose wifi if you're on 9.5.5) and then flash TWRP installer along with flashing magisk again, then download one of the kernels provided (I'm using ElementalX on 9.5.5 and it's working fine) and flash that in TWRP, then you should have TWRP, root and working wifi, etc.
Click to expand...
Click to collapse
When you say rooted boot.img...What do you mean? I took the stock boot.img, put in phone memory and selected in magisk. Magisk made a new boot.img and flashed that. After that phone didn't boot up like before and went to recovery mode. So to fix it I flashed again stock boot.img

I updated the same way as you (didn't disable my Magisk modules though). Everything went OK, kept root, but something borked in my /system folder and now can't make any changes in it (buildprop, hosts).
I'm not installing any unofficial TWRP, going to reflash the patched boot.img again to see if that works. If not, will go for a clean install. Worth a try?

eltarod said:
When you say rooted boot.img...What do you mean? I took the stock boot.img, put in phone memory and selected in magisk. Magisk made a new boot.img and flashed that. After that phone didn't boot up like before and went to recovery mode. So to fix it I flashed again stock boot.img
Click to expand...
Click to collapse
Rooted boot image : https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-root-oneplus-7-pro-patched-boot-t3931205
Follow that guide but, as I said, your rom is a later version so your wifi will break until you flash a compatible kernel, I'm using ElementalX with 9.5.5 and it's fine.
You would be best installing TWRP as soon as you can from here : https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322 since you'll be best using this to flash ElementalX

I'm guessing you flashed an incremental ota and not the full system image in step one? Might be your issue.
Sent from my GM1917 using Tapatalk

Flash stock boot IMG and uninstall substratum overlay themes, u will always want to do that before u update, then reflash patched boot image, then u can reinstall your themes
---------- Post added at 01:17 AM ---------- Previous post was at 12:55 AM ----------
larsdennert said:
I'm guessing you flashed an incremental ota and not the full system image in step one? Might be your issue.
Sent from my GM1917 using Tapatalk
Click to expand...
Click to collapse
No he said he was able to boot after the update, it was when he enabled his modules, more than likely its a substratum theme issue

OxygenOS C.36 out but DON'T INSTALL THIS UPDATE FOR NOW!

I got a KB2003 - ONeplus 8T EU
Oxygen Updater told me today there's an update avaliable, version C.36.
I donloaded it via the app and updated manually.
Phone did not boot up.
I was able to boot into recovery once where it said the system is corrupt.
I managed to enter fastboot mode. It was recognised on my PC by fastboot but no fastboot command are not accepted. I couldn't even turn it off again.
About 2 hours passed.
Then I managed to turn it off and it booted up like nothing happened, but I cannot download the data from it. Nothing is showing up in my browser via cable connection.
I am not feeling safe anymore ... I think I will roll back to C.35 if possible ASAP.

You need to keep an eye on https://community.oneplus.com/wap/circleDetail?id=1034260458221338626
C.36 is an IN only version at the moment of OOS 12
Update: since I first wrote this post there have been reports of C.36 being available now for both EU and NA.

Thanks.
Can I download C.35 and install simply install it?

The C36 is rolling out to other versions now. See https://forum.xda-developers.com/t/updates-thread.4188149/
I've just received the KB2005 (NA/global) version when I checked in Settings>About device. Normally the EU version takes longer to roll out.
I don't think the system updater will let you downgrade to C35, but you can try.

After 1 night everything seems to work well. I did not try to Rollback or did anything.
Fastboot is back.
Still do not understand the issue. LOL

I updated it earlier. Now it's stuck on reboot loop :/

VarunAgw said:
I updated it earlier. Now it's stuck on reboot loop :/
Click to expand...
Click to collapse
You updated via OTA or Oxygen Updater app ?

neopbm said:
You updated via OTA or Oxygen Updater app ?
Click to expand...
Click to collapse
Oxygen Updater
Long story, I have reset my phone (I was planning to anyway), so all good now.

VarunAgw said:
Oxygen Updater
Long story, I have reset my phone (I was planning to anyway), so all good now.
Click to expand...
Click to collapse
Oh ! Even if formating is a good thing sometime to restart from scratch, i hope you didnt lost any important data

neopbm said:
Oh ! Even if formating is a good thing sometime to restart from scratch, i hope you didnt lost any important data
Click to expand...
Click to collapse
Yeah, I was able to fix the boot loop temporarily and was able to boot once. It gave me enough time to retrieve all the important data

i have 36 working just doesn't boot magisk boot i pulled myself and booted. i just tried with canary build and everything works great

ecompton59 said:
i have 36 working just doesn't boot magisk boot i pulled myself and booted. i just tried with canary build and everything works great
Click to expand...
Click to collapse
how did you get the boot.img ?
i cant because i cant find the stock flash file for C.36
build number : KB2005_11_C.36

oxygen updater
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dont forget disable magisk mods

ecompton59 said:
oxygen updater
dont forget disable magisk mods
Click to expand...
Click to collapse
i am on c.36 , and on oxygen updater , i can only download flash file for c.33 , can i extract the boot img from it and root ? sorry for bad english

yes its in the 8t threads. payload dumper is what i use on pc its easy

ecompton59 said:
yes its in the 8t threads. payload dumper is what i use on pc its easy
Click to expand...
Click to collapse
so to be precise , i can extract boot.img from c.33 file and root my c.36 , right? ty btw

MevishL said:
so to be precise , i can extract boot.img from c.33 file and root my c.36 , right? ty btw
Click to expand...
Click to collapse
ecompton59 said:
i have 36 working just doesn't boot magisk boot i pulled myself and booted. i just tried with canary build and everything works great
Click to expand...
Click to collapse
sorry to bother, can you please tell me what are the exact steps to root it. im afraid i might brick my phone.

MevishL said:
sorry to bother, can you please tell me what are the exact steps to root it. im afraid i might brick my phone.
Click to expand...
Click to collapse
Look at this great guide.

Rootk1t said:
Look at this great guide.
Click to expand...
Click to collapse
thnks !

MevishL said:
sorry to bother, can you please tell me what are the exact steps to root it. im afraid i might brick my phone.
Click to expand...
Click to collapse
long as you know how to recover from brick with msm tool. but steps i use is oxygen updater to download full ota. (not incremental update) .put the 3gb zip on pc. use payload dumper to dump the zip (only for boot.img) take boot put on phone use magisk Canary to patch that boot. put boot on pc, reboot to recovery and fastboot boot magisk.img. once phone boots use magisk to directly patch boot and its rooted