Issue: Recently, when I tried to install Evolution X | Snow 6.3 [30/04/22], my screen was looping on twrp. I tried to reflash older twrp, orange fox recovery, and boot into recovery from fastboot, but, the result was the same.
Solution: I think this applies to other devices as well. I just booted into stock recovery(extracted from already downloaded stock ROM) from fastboot and wiped all data. Now, I am able to boot into system.
Caveat: Recovery is still on loop though. I will edit this post once I solve it
Related
So I tried to flash Magnolia X 1.0 coming from MIUI. After I wiped from MIUI and tried to install Magnolia I got an error. No big deal right? So I figured I would reboot recovery ( clockwork mod ) and try again, if it didn't work I could restore MIUI. When I hit reboot recovery I got stuck in a bootloop, from white htc screen to off. It just looks like it is trying to get to recovery but it is not loading it for some reason. So I decided to boot it into hboot and reflash the recovery, or possibly flash twrp. Now my problem is that the computer is not recognizing the phone, so none of my fastboot or adb commands do anything I just get <waiting for device>. Any ideas?
So right after I made the post I was able to get the drivers to reinstall and was able to re flash the recovery. Tried both CWM and TWRP and neither will boot. With TWRP I can get to the recovery splash screen but then it just goes black. Downloading the RUU now and I am going to try to flash that through the bootloader. Other than that I have no othe ideas...anyone else have any?
Got it...had to relock bootloader and run ruu then extract the stock recovery and flash it. Rebooted into recovery let it sit, then it rebooted back to the bootloader. Re-unlocked bootloader then flashed TWRP and it worked fine. Back up and running again.
Ok, so I have an MZ601. Flashed with R.A.H._TWRPv2.6.3_BigPart_selinux and omni-4.4.2-20140321-1754+0100-everest-HOMEMADE (updated with latest omni versions as they became available).
Everything been working fine until two days ago, when Xoom froze. It had happened before a couple of times and a reboot had solved the problem. Did that, and this time it got stuck in a bootloop, only getting as far as the Omni splash screen before rebooting. Few reboots later, nothing improving, and then it didn’t get past the Motorola M splash screen.
Tried booting into recovery, frozen at teamwin splashscreen. Nothing was working. Rebooted few time, same thing. Connected to power, charged til green, left for extra 30 minutes, tried again, same problem. Switched off. Came back to it today and....
All of the following done via Fastboot:
Tried flashing non bigpart TWRP (R.A.H._TWRPv2.6.3), still stuck at teamwin splash screen. Flashed Clockwork recovery, booted into recovery fine, but couldn’t see memory card. Flashed Clockwork recovery touch version, same problem. Flashed back to TWRP non bigpart, and it booted into recovery fine, sdcard mounted fine, seeing all files. Excellent. Decided to reflash bigpart version, used reboot option in TWRP, it tells me there is NO OS INSTALLED.
Ok, that’s a bit odd. Must be corrupted or something, but might explain the original freeze and bootloop and then not even getting to Omni splash screen. Swiped to reboot. Flashed bigpart version of TWRP. Rebooted into recovery. Back to original problem, stuck at teamwin splash screen. Left it for 10 minutes just to be sure. No joy.
Tried retracing steps, flashing Clockwork recovery. Reboot. Teamwin splash screen. WTF? Try flashing Rogue recovery. Reboot. Teamwin splash screen.
Kinda confused. It’s like it’s telling me it’s successfully flashed but it hasn’t actually done anything. Power everything down, disconnect everything. Start again. Flash Clockwork recovery, reboot, displays teamwin splash screen, sticks. Flash TWRP, non bigpart, displays teamwin splash screen, sticks. Reboot. Flash TWRP bigpart. Reboot, displays teamwin splash screen, sticks.
Walk away in disgust so as not to throw something at Xoom.
Ok, TL-DR recap.
Worked fine for months
Two days ago, froze on Omnirom logo, got stuck in bootloop
After few reboots didn’t even make it to Omnirom logo, stuck on M screen
Flashed TWRP recovery, non bigpart, stuck at teamwin splash screen
Flashed Clockwork recovery, got into recovery, no SDcard
Flashed Clockwork recovery, touch version, same problem
Flashed TWRP non bigpart, got into recovery, could see SDcard and files, rebooted from within recovery to flash bigpart version, tells me NO OS installed
Reboot
Now, regardless of which recovery I flash it goes straight to teamwin splash screen and stays there.
Help
Bump
Come on guys, 100 plus views and no replies? Surely somebody has an idea?
At the bottom of your tldr
Flashed twrp.. booted into recovery flashed bigpart twrp then says no OS.
It will say no OS cause bigpart would have wiped everything to resize the partition.
I've updated my TWRP to support bigpart and a few other things. Grab it from the pined thread by myself flash it and wipe everything but sdcard.
THen from the terminal in twrp type
df
Ensure the system is around a gig if so then you have repartitioned your /system
Then flash your bigpart Rom and gapps should be good to go from there
sent from::§::
Cheers for the reply, but I'd already had it flashed and running fine for about three months, as I said in my first line:
Ok, so I have an MZ601. Flashed with R.A.H._TWRPv2.6.3_BigPart_selinux and omni-4.4.2-20140321-1754+0100-everest-HOMEMADE
Actually, reading that back, it may not have been clear enough that I meant I'd been running it that way for a while.
Oh, also in the TLR, I meant I rebooted so that I could flash TWRP bigpart from ADB/FASTBOOT, not that I flashed it from within TWRP (which is what I should have done since it turned out to be the one and only time I managed to get past the splash screen). It told me there was no OS installed after I flashed the non bigpart version of TWRP and before I rebooted from within the recovery.
My point is I can't get past the splashscreen, no matter what I do, so I can't use any of the recovery / flash options in TWRP. I also can't flash any other recoveries using ADB or FASTBOOT because no matter what I flash it still stays stuck on the TWRP splashscreen when I reboot into recovery, whether I use FASTBOOT REBOOT or reboot using the volume rocker.
runandhide05 said:
At the bottom of your tldr
Flashed twrp.. booted into recovery flashed bigpart twrp then says no OS.
It will say no OS cause bigpart would have wiped everything to resize the partition.
I've updated my TWRP to support bigpart and a few other things. Grab it from the pined thread by myself flash it and wipe everything but sdcard.
THen from the terminal in twrp type
df
Ensure the system is around a gig if so then you have repartitioned your /system
Then flash your bigpart Rom and gapps should be good to go from there
sent from::§::
Click to expand...
Click to collapse
codliness1 said:
Cheers for the reply, but I'd already had it flashed and running fine for about three months, as I said in my first line:
Ok, so I have an MZ601. Flashed with R.A.H._TWRPv2.6.3_BigPart_selinux and omni-4.4.2-20140321-1754+0100-everest-HOMEMADE
Actually, reading that back, it may not have been clear enough that I meant I'd been running it that way for a while.
Oh, also in the TLR, I meant I rebooted so that I could flash TWRP bigpart from ADB/FASTBOOT, not that I flashed it from within TWRP (which is what I should have done since it turned out to be the one and only time I managed to get past the splash screen). It told me there was no OS installed after I flashed the non bigpart version of TWRP and before I rebooted from within the recovery.
My point is I can't get past the splashscreen, no matter what I do, so I can't use any of the recovery / flash options in TWRP. I also can't flash any other recoveries using ADB or FASTBOOT because no matter what I flash it still stays stuck on the TWRP splashscreen when I reboot into recovery, whether I use FASTBOOT REBOOT or reboot using the volume rocker.
Click to expand...
Click to collapse
I'm stuck in TWRP v2.6.3.0(RunAndHide05 Edition) cant mount system, wipe any data tried or install any rom. Tried flashing different recovery via fast boot but stays the same
*No Os installed error
@crazylegs90 did you figure this out man? Im stuck at twrp start screen..
Hi all,
Recently I updated my Nexus 5 from Lollipop to Marshmallow 6.0.1 (MMB29Q) - latest build.
everything stock works fine but, once I flash a customer recovery, in my case TWRP it stops working...I get either a startup loop or TWRP gets erased by stock recovery.
I tried various steps ...
flashed TWRP 2.8.7.1 - rebooted to boot loader was able to get into TWRP but, once I reboot system, everything works but TWRP is gone/erased and replaced by stock recovery?
Flash TWRP 2.8.7.1, then flash latest TWRP 3.0, reboot to boot loader and can get into TWRP but once i reboot into system, I am stuck on the initial boot loop.
I have to start from scratch of flashing system and boot etc to get past the loop and it still replaces TWRP with stock recovery.
I can always get into Fastboot but when I go to recovery it seems its being replaced by stock recovery.
anyone experiencing this issue? thanks for your help.
I guess I am doing something stupid but, not sure what...and thanks for your help
If you give more detail on the steps you are taking it will be easier for someone to help. Also, have you tried doing a factory reset when it bootloops?
thanks for the response..here are the details..
I had Lollipop with TWRP 2.8.7.1
yesterday, I downloaded latest build from android site...extracted all files....booted into bootloader and flashed all files..
rebooted - Marshmallow works perfectly...offcourse it not rooted yet or its locedback due to this flash
Scenario:1
So downloaded TWRP 2.8.7.1 and flashed it as recovery, no errors nothing...i rebooted to bootloader and went to recovery to confirm TWRP is there
I rebooted the system - TWRP gives option to root which I said yes so its rooted. I reboot system, this goes into bootloop - I wait for say 5-10 min in this loop mode and I see that adb can recognize the device but nothing else....its stuck in loop
when I force shut down by holding power button for few sec - and go back bootloader/recovery - TWRP is still there
***note*** I did factory wipe in TWRP but that did not fix above condition.
Scenario2:
exact same steps but after I flashed twrp2.8.7.1, I rebooted bootloader and flashed twrp 3.0 as well confirmed twrp 3.0 is flashed and rebooted system - phone start normally no issues - when I restart to bootloader - no TWRP exists, its replaced by stock recovery
Scenario 2, I tried couple of other ways and still the same thing happens - twrp 3.0 get erased.
not sure what I am doing wrong but TWRP doesn't stick
since this is my active device - i flash system.img and boot.img to get the phone to working condition
thanks for your help
Try flashing the latest supersu to get root.
audit13 said:
Try flashing the latest supersu to get root.
Click to expand...
Click to collapse
That did the trick.....thank you very much. I was using older version of supersu thinking it was latest.....I downloaded V2.65 and installed it and that fixed all my troubles..
muchas gracias
I wanted to root my OP6 and entered fastboot mode.
I successfully flashed the bluespark img from Terminal and installed the Bluespark ZIP file from this link
After rebooting, it got stuck on the bluespark logo and when I tried to reboot the system, the phone got stuck on the Bootloader unlocked screen.
I tried to repeat the process and this time flashed the TWRP lastest version. Now its stuck on the TWRP logo screen.
Then I browsed around and found these stock boot recovery img files,
After flashing the latest one, the phone got started properly but everytime I restart the phone, its getting stuck on the Bootloader warning screen and the recovery options are still stuck at TWRP image.
If nothing works, have a look here
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Hello, I'm Poco X3 NFC User,
I had Official Lineage 18.1 installed in my device, with Oragne Fox as Recovery,
Yesterday Tried to Dirty Flash Baikaal OS, ( Found in Poco X3 Telegram Group),
it Showed the Rom boot logo and then restarted to recovery,
cleared dalvik/Cache, Room did boot to welcome screen and restarted happened 2-3 times,
Booted to Recovery , formatted system, cleared cache, and installed AOSP Extended from XDA,
it behaved exactly the same , Rom boots to welcome screen and restarts in split second,
And Orange Fox Recovery also kept restarting on Recovery Splash Screen,
Tried Installing Orange Fox Recovery via Fastboot, Still Restarts on Splash Screen,
Tried TWRP 3.5.0-0 By mahajant99 via fastboot, it flashes but keeps restarting to Recovery Splash Screen,
So, Right now I'm Unable to boot to Rom, or recovery.
Rom restarts after Welcome Screen, And Recovery on the Splash Screen.
What can be done??
Any help would be appreciated.
lala099 said:
Yesterday Tried to Dirty Flash Baikaal OS
Click to expand...
Click to collapse
You shouldn't have done that. Always do a clean flash when changing ROMs.
To solve your problem, flash this fastboot ROM (5.3 GB) and don't relock bootloader:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
When your phone reboots, simply always "skip" till it's up and running.
Install a recent TWRP. You will find one on this forum.
Install your ROM according to instructions