Hi all,
Recently I updated my Nexus 5 from Lollipop to Marshmallow 6.0.1 (MMB29Q) - latest build.
everything stock works fine but, once I flash a customer recovery, in my case TWRP it stops working...I get either a startup loop or TWRP gets erased by stock recovery.
I tried various steps ...
flashed TWRP 2.8.7.1 - rebooted to boot loader was able to get into TWRP but, once I reboot system, everything works but TWRP is gone/erased and replaced by stock recovery?
Flash TWRP 2.8.7.1, then flash latest TWRP 3.0, reboot to boot loader and can get into TWRP but once i reboot into system, I am stuck on the initial boot loop.
I have to start from scratch of flashing system and boot etc to get past the loop and it still replaces TWRP with stock recovery.
I can always get into Fastboot but when I go to recovery it seems its being replaced by stock recovery.
anyone experiencing this issue? thanks for your help.
I guess I am doing something stupid but, not sure what...and thanks for your help
If you give more detail on the steps you are taking it will be easier for someone to help. Also, have you tried doing a factory reset when it bootloops?
thanks for the response..here are the details..
I had Lollipop with TWRP 2.8.7.1
yesterday, I downloaded latest build from android site...extracted all files....booted into bootloader and flashed all files..
rebooted - Marshmallow works perfectly...offcourse it not rooted yet or its locedback due to this flash
Scenario:1
So downloaded TWRP 2.8.7.1 and flashed it as recovery, no errors nothing...i rebooted to bootloader and went to recovery to confirm TWRP is there
I rebooted the system - TWRP gives option to root which I said yes so its rooted. I reboot system, this goes into bootloop - I wait for say 5-10 min in this loop mode and I see that adb can recognize the device but nothing else....its stuck in loop
when I force shut down by holding power button for few sec - and go back bootloader/recovery - TWRP is still there
***note*** I did factory wipe in TWRP but that did not fix above condition.
Scenario2:
exact same steps but after I flashed twrp2.8.7.1, I rebooted bootloader and flashed twrp 3.0 as well confirmed twrp 3.0 is flashed and rebooted system - phone start normally no issues - when I restart to bootloader - no TWRP exists, its replaced by stock recovery
Scenario 2, I tried couple of other ways and still the same thing happens - twrp 3.0 get erased.
not sure what I am doing wrong but TWRP doesn't stick
since this is my active device - i flash system.img and boot.img to get the phone to working condition
thanks for your help
Try flashing the latest supersu to get root.
audit13 said:
Try flashing the latest supersu to get root.
Click to expand...
Click to collapse
That did the trick.....thank you very much. I was using older version of supersu thinking it was latest.....I downloaded V2.65 and installed it and that fixed all my troubles..
muchas gracias
Related
Hi.
Today I wanted to upgrade from CM11 to CM12.1, but I had to upgrade the bootloader first. It all worked and I'm now on bootloader version 41.18.
When I flashed the ROM it flashed in 20 seconds from an USB stick. It seemed a little to fast. When I rebooted it worked fine and I was on Android 5.1.1, but after installing SuperSU and rebooting I stuck into a bootloop.
I'm now in a bootloop and when I try to enter the recovery the TWRP splash screen comes up, but then it goes into the bootloop again.
I have the XT1032 and my TWRP version is 2.8.6.0 and I have a TWRP backup from CM11
If someone could push me in the right direction how I can access TWRP then that would be great.
Thanks in advance.
Quick update
The phone now booted into TWRP, but when I do a restore to my backup the phone goes back to the bootloop. The same happens when I try to wipe.
zomgwalrus said:
The phone now booted into TWRP, but when I do a restore to my backup the phone goes back to the bootloop. The same happens when I try to wipe.
Click to expand...
Click to collapse
I have the same issue, cannot get into twrp, how did you managed to boot into TWRP?
i had same issues in my moto g xt1032 i tried below CM12.1 works without issues.
go recovery --- wipe---- format data
and try step install steps like install rom zip & gapps
Ok, first what do you use to flash recovery, can you reflash recovery with the lastest TWRP version (2.8.7.0) and post back the logs here? Then tell me if you can get into recovery
Its common place that twrp cause bootloop with backups.
No problem try to
Install new twrp using fastboot mode it will be work fine
Hi guys, I flashed the latest factory image, then flashed the latest TWRP but can access it 1 out of 10 tries.. What am I doing wrong? Is it a faulty replacement phone? Never had this issue with my other nexus 5 (same recovery file but lollipop and not marshmallow) and now I have this problem.. Tried to riflashato the factory image 5 times, boot to recovery without installing but nothing changed.. Thanks in advance!
If you just just flashed TWRP, then booted into Android, then reboot into recovery.. Android will overwrite TWRP with the stock recovery.
a hammerhead wrote this.
beekay201 said:
If you just just flashed TWRP, then booted into Android, then reboot into recovery.. Android will overwrite TWRP with the stock recovery.
a hammerhead wrote this.
Click to expand...
Click to collapse
Never happened before.. How can I prevent this? Sometimes I can't even boot to twrp after flashing and not rebooting to android..
carlese said:
Never happened before.. How can I prevent this? Sometimes I can't even boot to twrp after flashing and not rebooting to android..
Click to expand...
Click to collapse
do you finde fix
slavisa037 said:
do you finde fix
Click to expand...
Click to collapse
Downloaded twrp again and used flashify..
carlese said:
Downloaded twrp again and used flashify..
Click to expand...
Click to collapse
This is not really a fix, since to use Flashify one needs to be rooted already.
What I did to work around this was reflash LMY48M. After reflashing that, fastboot correctly boots/flashes twrp.
I've read that the issue arises when trying to boot and/or flash twrp with MRA56K installed, AND the device is connected to USB.
Ok, i got some of problems here, i tryied to root my Nexus 5 with other Android 6 version, it was the first one launched after development version. Now i have MRA58K version.
Problem 1 : I have no stock recovery, i first rooted original version of Marshmallow with CWM and i soft bricked, so no backup, no factory images. Installed MRA58K and there is no stock recovery, thanks god i can use bootloader. I can install TWRP, but i want to install the old recovery, Tell me how to do it.
Problem 2: Actual version of Marshmallow ask me to install a patch, but when installing i got stuck in TWRP, it cant install it (yes, android was rooted, but i installed twrp before root, and the update were before it.)
Thanks.
You can flash a stock ROM using the flash-all file in a command prompt. This will install stock ROM with stock recovery. Make sure the phone has an unlocked bootloader and you should be fine.
Official OTA updates cannot be installed with a custom recovery.
I tryied 3 times to install OS with flash-all. All the problems start after i installed CWM and try to root the phone, but after that, i used a stock rom image that was different build than actually one.
I`m not sure yet who`s fault is.
Any ideas?
I don't recommend using CWM, only TWRP.
After you flash TWRP always boot into it, and since you're flashing a custom recovery I'm going to assume you don't care about OTA's, swipe to allow system to be mounted. TWRP will automatically patch the system to survive android trying to overwrite it. Reboot into TWRP a second time to be safe. TWRP should stick from now on until you flash over it or restore stock system partition.
Yes, now i have TWRP as recovery, but i want to replace it with stock recovery.
Problem is, when i upload stock recovery and try to boot in recovery mode, i got the green dead android with red triangle.
But after TWRP uploading and booting in recovery mode, TWRP is there..
I really don`t know what`s wrong.
Flash stock recovery, select recovery from the fastboot menu, hold the power button and press volume up button.
Hello everyone.
I had a problem flashing TWRP on my Google Nexus 5, or better the problem comes when I try to enter the recovery.
I followed this pattern from stock android 6.0.1 with august security patch:
1) unlock bootloader
2) downloaded lastest TWRP (3.0.2 hammerhead) recovery from the official website
3) flash it with "fastboot flash recovery recovery.img"
Until this point everything's alright but then when I unplug my phone from the laptop and click on enter recovery something strange happens.
I can see the TWRP boot image but as soon as I go in I see tons of errors related to "cannot mount ..." and some partitions name like /data, /cache, and then starts the bootloop without let me any chance to do something. Sorry but I can't see every error beacuse this happen too fast.
Any idea on what is going on?
I've tried the TWRP 3.0.1 but is the same shuold I go down or maybe I have to change it beacuse of compatibily issues with the monthly patches?
Thank you for your help, I hope I explained my problem clearly.
After unlocking the bootloader, phone wipe all data? Did you reboot after unlocking bootloader?
audit13 said:
After unlocking the bootloader, phone wipe all data? Did you reboot after unlocking bootloader?
Click to expand...
Click to collapse
No I've just unlocked and then tryied to flash the recovery without wipe.
But data is already wiped by unlocking the bootloader isn't it?
Anyway thanks for your reply as soon as I can I'll try what you have written.
Yes, the data should be automatically wiped. Try TWRP 2.87. If the phone still doesn't boot into TWRP, reflash stock recovery, flash userdata.img, immediately boot into stock recovery using the button combo without rebooting, perform a factory wipe, reboot into fastboot, and flash TWRP again.
audit13 said:
Yes, the data should be automatically wiped. Try TWRP 2.87. If the phone still doesn't boot into TWRP, reflash stock recovery, flash userdata.img, immediately boot into stock recovery using the button combo without rebooting, perform a factory wipe, reboot into fastboot, and flash TWRP again.
Click to expand...
Click to collapse
Thank you so much for telling me to flash the 2.8.7, i've choosen the 2.8.7.1 without success (it did't flash i don't know why) but then after another wipe all I've flashed the 2.8.7.0 and it seems to work.
The only thing I would like to ask now is: I'm going to flash superSU and elementalX over stock AOSP (I don't want custom ROM for now) and can this recovery cause problem because of it is not the last update?
Thank you again for the answer!
I have not tried 2.87 with Elemental X. The only way to determine whether it will work would be to try it. I recommend creating a nandroid backup before flashing Elemental so you can restore if something goes wrong.
TWRP Restore problem
Hi, I have an issue with the resotre of TWRP...
Here's what I did:
-Downloaded the latest OTA image https://developers.google.com/android/nexus/ota
-Downloaded latest SuperSU http://download.chainfire.eu/supersu-stable
-Downloaded latest ElementalX http://elementalx.org/devices/nexus-5/
-reboot to TWRP
Choose OTA, then SuperSU, then ElementalX
Luunch the restore..
And my screen is "blocked" from 5 hours on Install Zip 1 of 3.
"blocked" means doesn't move to the Zip2 but the clock is moving... the screen is locking itself after few seconds and I am able to unlock it...
Any idea how to exit properly ?
I have rebooted...deleted all my music... (I think that the issue may come from insufficient disk space) and relaunched...
Will see...
download Nexus Root Toolkit-type in google Nexus Root Toolkit - and watch from yuotoube how it work's
good luck
hunter-dz said:
download Nexus Root Toolkit-type in google Nexus Root Toolkit - and watch from yuotoube how it work's
good luck
Click to expand...
Click to collapse
My N5 was already rooted... and it's the second time that I update the OTA using directly TWRP... and for the August patch it has worked fine.
I don't know what's happen now...
kevtuning said:
My N5 was already rooted... and it's the second time that I update the OTA using directly TWRP... and for the August patch it has worked fine.
I don't know what's happen now...
Click to expand...
Click to collapse
Download thé nrt and i Will teach how to root ur n5
And type in Google nrt n5 xda
audit13 said:
I have not tried 2.87 with Elemental X. The only way to determine whether it will work would be to try it. I recommend creating a nandroid backup before flashing Elemental so you can restore if something goes wrong.
Click to expand...
Click to collapse
Now I can confirm that I was able to flash the lastest SuperSU and ElementalX with TWRP 2.8.7.0 without any problem, so thank you again for your help.
kevtuning said:
Hi, I have an issue with the resotre of TWRP...
Here's what I did:
-Downloaded the latest OTA image https://developers.google.com/android/nexus/ota
-Downloaded latest SuperSU http://download.chainfire.eu/supersu-stable
-Downloaded latest ElementalX http://elementalx.org/devices/nexus-5/
-reboot to TWRP
Choose OTA, then SuperSU, then ElementalX
Luunch the restore..
And my screen is "blocked" from 5 hours on Install Zip 1 of 3.
"blocked" means doesn't move to the Zip2 but the clock is moving... the screen is locking itself after few seconds and I am able to unlock it...
Any idea how to exit properly ?
Click to expand...
Click to collapse
Hi, I've have successfully installed the last OTA update but not with zip file, instead I downloaded the factory image and flashed with fastboot boot.img and system.img (also vendor.img if you have one) then rebooted into TWRP and installed the lastest ElementalX and SuperSU.
I'm not sure but I think that factory image zip file are not installable via recovery but only with the flash-all that comes with them. This script use fastboot to flash everything you need of the factory image
You can find this procedure on the ElementalX website, here is the link hope it can help out: http://elementalx.org/how-to-install-android-monthly-security-updates/
Finally... I installed CM13 and ElementalX... in some minutes ...
I suppose the the problem was in my zip file...
Alright, so its without wasting time of people here, I'd just state the summary in points.
I flashed stock rom a.17 - I had custom roms before, I got fed up with them changing every 2 months.
Then everything worked fine until I flashed the boot.img from vishal_android_freak to get recovery.
I got the twrp recovery 2.7.0.0.
I flashed AOSP 6.0.1 through it, it was done very well but the rom stuck on boot animation for more then 30 mins.
I pulled the battery out - now I had TWRP 2.8.4.0
I tried flashing the rom again, it gave /data error.
I flashed stock rom, rooted then tried other methods of getting recovery, I failed everytime (Tried from TWRP app, su dd command, Recovery installer app )
Then I found a CWM boot.img to flash through fastboot.
I did and got CWM.
I flashed AOSP again from it, it stuck on boot animation again.
Then again I flashed stock rom and repeated the process.
This time with CWM, I flashed Stryflex LP Ultimate
It also stuck on boot animations.
Any idea why this happens? How to fix this ****?
Summary: Only stock rom works, not any other rom.
Observer000 said:
Alright, so its without wasting time of people here, I'd just state the summary in points.
I flashed stock rom a.17 - I had custom roms before, I got fed up with them changing every 2 months.
Then everything worked fine until I flashed the boot.img from vishal_android_freak to get recovery.
I got the twrp recovery 2.7.0.0.
I flashed AOSP 6.0.1 through it, it was done very well but the rom stuck on boot animation for more then 30 mins.
I pulled the battery out - now I had TWRP 2.8.4.0
I tried flashing the rom again, it gave /data error.
I flashed stock rom, rooted then tried other methods of getting recovery, I failed everytime (Tried from TWRP app, su dd command, Recovery installer app )
Then I found a CWM boot.img to flash through fastboot.
I did and got CWM.
I flashed AOSP again from it, it stuck on boot animation again.
Then again I flashed stock rom and repeated the process.
This time with CWM, I flashed Stryflex LP Ultimate
It also stuck on boot animations.
Any idea why this happens? How to fix this ****?
Summary: Only stock rom works, not any other rom.
Click to expand...
Click to collapse
I think, that means bootloader is unlocked again! Recheck bootloader state and always use latest TWRP recovery (v3.0.2 for us).
You can download Xperia L recovery from twrp website and then use your current v2.8.4 one to install that. Or just simply use adb & fastboot in your PC and enter this command:
Code:
fastboot flash boot [I]your recovery image name.img[/I]
. And then flash your desired ROM
Kungfu73 said:
I think, that means bootloader is unlocked again! Recheck bootloader state and always use latest TWRP recovery (v3.0.2 for us).
You can download Xperia L recovery from twrp website and then use your current v2.8.4 one to install that. Or just simply use adb & fastboot in your PC and enter this command:
Code:
fastboot flash boot [I]your recovery image name.img[/I]
. And then flash your desired ROM
Click to expand...
Click to collapse
Alright, I check bootloader state, it says bootloader unlock done means it's unlocked.
I am going to flash twrp 3.0.2 and will update you soon!
Kungfu73 said:
I think, that means bootloader is unlocked again! Recheck bootloader state and always use latest TWRP recovery (v3.0.2 for us).
You can download Xperia L recovery from twrp website and then use your current v2.8.4 one to install that. Or just simply use adb & fastboot in your PC and enter this command:
Code:
fastboot flash boot [I]your recovery image name.img[/I]
. And then flash your desired ROM
Click to expand...
Click to collapse
Oh Man, you saved my day! nothing worked but the damnit twrp 3.0.2
For anyone else referring here:
I get hell lot of graphical glitches when I flashed twrp 3.0.2, I just made it to factory reset and click install button although my screen was glitched and I cant even look at it.
JUST IGNORE THE GLITCHES! I wiped dalvik cache after flashing AOSP-RRO, now I'm flashing Lineage OS, thanks a lot! Button pressed.
Observer000 said:
Oh Man, you saved my day! nothing worked but the damnit twrp 3.0.2
For anyone else referring here:
I get hell lot of graphical glitches when I flashed twrp 3.0.2, I just made it to factory reset and click install button although my screen was glitched and I cant even look at it.
JUST IGNORE THE GLITCHES! I wiped dalvik cache after flashing AOSP-RRO, now I'm flashing Lineage OS, thanks a lot! Button pressed.
Click to expand...
Click to collapse
Did TWRP 3.0.2 ultimately work with this?
If worked, I am also curious to know how much space is left there for apps in device memory, since the ROM seems to be Marshmallow based.
Hey Guys,
i think i messed it up with my device
coming from stock
the steps i did
i opened bootloader
flashed the twrp.img
flashed latest elementalx kernel zip in twrp for LZMA support
rebooted the device and all seemed ok. the device have booted end everything was wiped.
rebooted into recovery and flashed latest magisk.zip
wiped cache and rebooted the device
now i have the problem that the device is stuck into bootloop
after some tries the device shuts down and reboots into twrp
i did a factory wipe. same bootloop
so i tired now to flash magist unistaller.zip but i get same bootloop issues
what next?
flash a custom rom?
thx for help
I guess it's because you flashed the TWRP img instead booting. The right steps to install permanently the TWRP are:
1) boot TWRP image (no flash)
2) flash kernel with LZMA compatibility
3) flash TWRP installer zip (+magisk)
Ok flashed a custom rom over the hickups
Now everything works perfectly