The phone was purchased from a 3rd Party on Amazon.
When I load Samsung Pay (sideloaded along with framework apk) it just freezes on the home screen. When I press "Start" the blue loading cycle appears for just a half sec and disappears. Nothing else happens.
Location: US
Carrier: ATT
Model (as stated by system info): SM-G930FD (BUT I only have one SIM tray)
Model (as stated by sammobile): SM-930F
Android version: 7.0
Baseband version: G930FXXU1DQB1
Knox warranty bit: 0x0
Product Code: SM-G930FZKUBTU
PDA: G930FXXU1DQB3
CSC: G930FOXA1DQB1
Baseband: G930FXXU1DQB1
pretty please?
Closed for business.
I want to unlock Samsung note 2 is possible ?
Psicrpf said:
I want to unlock Samsung note 2 is possible ?
Click to expand...
Click to collapse
Sure pm me with ur model
Operation: Unlock
Selected model: SM-G935P
Software version: 28.1
Waiting ADB device... Ok
Reading phone info...
Model: SM-G935P
Android version: 6.0.1
Product code: Not Active
Phone version: G935PVPS4APJ2
PDA version: G935PVPS4APJ2
CSC version: G935PSPT4APJ2
CSC country code: USA
CSC sales code: SPR
HW version: REV0.7
Phone SN: 00000000000
Modem board: MSM8996
RF cal date: 2016.09.05
IMEI:
Writing AT RIL... Ok
Initialization AT RIL... Ok
Unlocking... Ok
Rebooting phone... Ok
Unlock done
Done with Samsung Tool PRO v.28.1
I have an s3 att I really want to unlock
timmmah842 said:
I have an s3 att I really want to unlock
Click to expand...
Click to collapse
Yes I can do it send me ur skype
Waiting ADB device... OK
Reading phone info...
Model: SM-N920P
Android version: 7.0
Product code: Not Active
Phone version: N920PVPS3DQH1
PDA version: N920PVPS3DQH1
CSC version: N920PSPT3DQH1
CSC country code: USA
CSC sales code: SPR
HW version: N920P.04
Phone SN: 00000000000
Modem board: MDM9635M
Security patch: 2017-08-01
RF cal date: 2016.03.03
IMEI:
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Online now
Free 4 alllllllllllllllll
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G930P
Detected phone model: SM-G930P
Firmware compiled date: Fri Jul 1 11:27:28 KST 2016
PDA version: G930PVPS2APG1
CSC version: G930PSPT2APG1
SW version: G930PVPS2APG1
Phone SN: 00000000000
Android version: 6.0.1 (MMB29M)
Sales code: SPR
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2016-07-01
SIM 1 status: absent
Codename: heroqltespr
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as Security-SM-G930P-05-08-2017_06-36-01 file
Installing service app...
Unlocking phone...
Finalizing...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.5.6 Software version.
Hi,
The IMEI on my T-Mobile S6 got wiped after last update. I have downgraded it back but still it doesn't register on network. Can you fix it?
Thanks
Just wanted to mention that instrumentaly was able to unlock my SM-G930P. We ran into a couple of issues along the way, but it worked out in the end. He didn't ask for anything up front or otherwise. Thanks again!
tbrar said:
Hi,
The IMEI on my T-Mobile S6 got wiped after last update. I have downgraded it back but still it doesn't register on network. Can you fix it?
Thanks
Click to expand...
Click to collapse
Sure check ur inbox
Can you u lock my s7 edge g935f
havelln said:
Can you u lock my s7 edge g935f
Click to expand...
Click to collapse
Sure check your inbox
I'd like to have my SM-G930F, unlocked if possible pls.
idxsky said:
I'd like to have my SM-G930F, unlocked if possible pls.
Click to expand...
Click to collapse
Sure check your inbox
Galaxy s7 edge g935f unlocked
had hassle trying to get my phone unlocked by ee my provider who couldn't unlock it even got unlock codes from a company online that didn't work
but instrumentaly managed to do it
thank you I'm really happy to be able to use my phone again
havelln said:
had hassle trying to get my phone unlocked by ee my provider who couldn't unlock it even got unlock codes from a company online that didn't work
but instrumentaly managed to do it
thank you I'm really happy to be able to use my phone again
Click to expand...
Click to collapse
Can you unlock sm-935p?
Hi. Can you unlock sm-935p? It is runing BQE1 firmware version. Thank you!
Hi everyone,
I bought a S8+ 3 years ago for my wife when we were living in China. They told me it was a US version with 1 SIM slot. It worked well for the years and had some chinese preinstalled apps, but it had google (China has some legal issues with google so most of the phones don't come with google apps installed or allowed).
Today, I did a factory reset to it since I got another phone for my wife and I want to use it as my work phone and I realized Its still on android 7 (tried updating the software in the phone menu and it says it up to date but still on android 7)
I checked the phone and software info and it says:
-Model Number: SM-G9550
-Hardware version REV1.0
-Android Version 7.0
-Samsung Experience version 8.1
-Baseband version G9550ZCU1AQEE
-Kernel version: 4.4.16-11449429 [email protected] #1 Wed May 24 14:13:30 KST 2017
-Build number NRD90M.G9550ZCU1AQEE
So then I decided to download Odin and the right firmware from sammobile since they have official ones for Samsung. I downloaded a SM-G9550 for China Android 9 Build date Mon, 19 Oct 2020. I tried flashing it but it says it failed. It didn't do anything to my phone (at least it didn't brick it nor it should since I checked everything to make sure)
Since this is not normal, I decided to go check the version when I press the buttons Bixby + Vol. Down + Power and found the following info:
-CARRIER: ATT
-RPMB fuse blown
-RPMB PROVISIONED
-CURRENT BINARY: Samsung Official
-SYSTEM STATUS: Official
-FRP LOCK: OFF
-WARRANTY VOID: 0X0
-QUALCOMM SECUREBOOT: ENABLE
-RP SWREV: B1(1,1,1,1,1) K1 S1
-SECURE DOWNLOAD: ENABLE
-DID: 205E5F695E33
At this point i'm concerned in why does it says carrier ATT, so I checked the menu when pressing the buttons Bixby + Vol. Up + Power and the following info is displayed on the top:
-Android Recovery
-samsung/dream2qltesq/dream2qltesq
-7.0/NRD90M/G955USQU1AQEF
Very confusing for me, since I never encountered this before. And I assume my phone as been rooted.... since I searched what dream2qltesq was, and its for rooting the S8+. Sucks.
Now i'm concerned and don't know which model to flash (G9550 from China or G955U from US)
Can anyone help me with this problem and some questions that I have:
1- I want to flash a newer version, which one should I download and flash then? (G9550 from China or G955U from US) (I don't need any of the chinese apps, never used them)
2- If its ATT carrier, will flashing to a G955U version of ATT lock my phone?
I just want my phone to work well with newer version in English with google in a Official Samsung Rom for S8+.
Really appreciate beforehand any help.
Thanks!
TJ
I just purchased a used Note 20 Ultra that was originally for At&t and unlocked, I am using it with my T-Mobile sim and all works fine. I am little concerned as the UI is 3.1 and Android Version is 11 and it says software is up to date, is this correct?
Before I purchased it I also requested Unlock code from At&t and they sent the Unlock code which is weird since it is already Unlocked .....Maybe I am just being paranoid.
The imei on the phone matches the imei on the back of phone and shows all clear on swappa imei.
So the question is how can I tell is any software/fw was altered on this device to Unlock it early?
*#1234# shows the following versions:
AP: N986USQS2DUH3
CP: N986USQS2DUH3
CSC: N986UOYN2DUH3
Model: SM-N986U
I have installed Phone Info+ (SAM) in case anymore info is required to help with this
Thank you in advance for any help.
I think that I'm in the same boat. I received a insurance replacement phone that was unlocked, but I think that Geek Squad had to get an unlock code to get it to work on Tmobile. My phone has never been updated. It's still on the software that it shipped with. My old phone had the black screen of death, and I'm trying to flash a more recent version of Android with Odin. What's your baseband version?
My Baseband version is N986USQS2DUH3
Restructured my previous thread that was rushed to include all that I missed.
I bought this phone second hand from a friend with a smashed screen, I replaced the screen and it had a password so I blanked it using buttons (mate wasn't happy to give me password there and then) *and my impatience got me.
I thought I could OneClick it through test point since it was (still is) opened.
I wasnt getting anywhere with FRP removal, then I think I pressed All + Dload with just preloader selected or something.....
Since that it just loops on Brom no download mode etc
I can still bypass protection and get it to flashing point but no matter which firmware I try, It errors from U1 OS11 to U5 OS13.
Two errors are:
1: ANTI ROLE BACK
2: STATUS_SEC_IMGHDR_TYPE_MISMATCH (0XC0020029)
I've included below my Model which I pulled from IMEI checker.
WIlling to pay and teamview for someone to fix if it comes to that.
SM-A226B GRAY EUA
Model Desc: Samsung Galaxy A22 5G
Model Name: SM-A226B
Model Number: SM-A226BZAUEUA
Production location: Korea SEC
Production Date: 16-03-2022
Country: United Kingdom
Carrier: Factory Unlocked