The phone was purchased from a 3rd Party on Amazon.
When I load Samsung Pay (sideloaded along with framework apk) it just freezes on the home screen. When I press "Start" the blue loading cycle appears for just a half sec and disappears. Nothing else happens.
Location: US
Carrier: ATT
Model (as stated by system info): SM-G930FD (BUT I only have one SIM tray)
Model (as stated by sammobile): SM-930F
Android version: 7.0
Baseband version: G930FXXU1DQB1
Knox warranty bit: 0x0
Product Code: SM-G930FZKUBTU
PDA: G930FXXU1DQB3
CSC: G930FOXA1DQB1
Baseband: G930FXXU1DQB1
pretty please?
Related
I tried to update to XXLE2 from XXLD2 and was successful. I have a major problem though!!! Before i did it, when i entered *#1234# in the dialer i got PDA: I9070PXXLD2, PHONE: XXLD2, CSC: I9070PXXLD2 (or some **** like that). Now i got PDA: I9070XXLE2, PHONE: blank, CSC: I9070OXXLD4. i don't remember the exact PHONE and CSC codes prior to updating. Now i have no service!!!! i am trying to return my phone back on. in the system info i got Build number GINGERBREAD.XXLE2 (before, XXLD2). my model numer now displays, GT-I9070 (before, GT-I9070P). also my baseband version is unknown (before, I9070PXXLD2). someone help my entry level knowledge sorry ass. i am a trial and error type of person and this time it bit me in the ass!
Hi Guys, new to this so please indulge me a little!
Purchased two GT-P5100 Samsung Galaxy Tab 2s for the kids, checked the software version using *#1234# and received this:
AP: P5100UBALD4
CP: P5100UBLD4
CSC: P5100UUBALD4
Connect them to kies and it displays: latest firmware version: PDA:LD4 / PHONE:LD4 / CSC:LD4 (TTT)
Checked these at SamMobile:
GT-P5100 - Trinidad and Tobago
PDA: P5100UBALD4
CSC: P5100UUBALD4
Version: 4.0.3
Modified: 2012-04-17
Checked in firmware and files for Australian version (XSA) and found that here sammobile. com/firmware/?page=3&model=GT-P5100&pcode=XSA&os=1&type=3#firmware
Downloaded the firmware and flash programs files. Flash programs contained odin3 V1.87 and signed_espresso_20120220_16G.pit Firmware file contained: P5100XWALE3_P5100XSAALE1_P5100XXLD7_HOME.tar.md5
Put the tab into download mode after shutting down using power+volume right then volume left to enter odin mode.
Connected the tab with the usb cable, attached the pit file using PIT button then attached the md5 file using the PDA button. Re-partition deselected, auto-reboot & f.reset time were both selected, flash lock not selected. Pressed the start button. Process completed and the tab rebooted as normal.
Tried using *#1234# and received this:
AP: P5100XWALE3
CP: P5100XXLD7
CSC: P5100XSAALE1
When I connected to Kies I now see this:
"Your devices current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LE3 / PHONE:LD7 / CSC:LE1 (TTT)
I assumed rightly or wrongly that the country designator should have changed to XSA. Does anyone have any idea if I have missed something in the process?
I checked Setting > About Device:
Model Number:
GT-P5100
Android version:
4.0.3
Baseband version:
P5100XXLD7
Kernel version:
3.0.8-546364-user
[email protected]#1
Build Number:
IML74K.P5100XWALE3
Within status, device status is normal
Appreciate any advice you can offer.
Cheers Paul
Solved
PaulCsyd said:
Hi Guys, new to this so please indulge me a little!
Purchased two GT-P5100 Samsung Galaxy Tab 2s for the kids, checked the software version using *#1234# and received this:
AP: P5100UBALD4
CP: P5100UBLD4
CSC: P5100UUBALD4
Connect them to kies and it displays: latest firmware version: PDA:LD4 / PHONE:LD4 / CSC:LD4 (TTT)
Checked these at SamMobile:
GT-P5100 - Trinidad and Tobago
PDA: P5100UBALD4
CSC: P5100UUBALD4
Version: 4.0.3
Modified: 2012-04-17
Checked in firmware and files for Australian version (XSA) and found that here sammobile. com/firmware/?page=3&model=GT-P5100&pcode=XSA&os=1&type=3#firmware
Downloaded the firmware and flash programs files. Flash programs contained odin3 V1.87 and signed_espresso_20120220_16G.pit Firmware file contained: P5100XWALE3_P5100XSAALE1_P5100XXLD7_HOME.tar.md5
Put the tab into download mode after shutting down using power+volume right then volume left to enter odin mode.
Connected the tab with the usb cable, attached the pit file using PIT button then attached the md5 file using the PDA button. Re-partition deselected, auto-reboot & f.reset time were both selected, flash lock not selected. Pressed the start button. Process completed and the tab rebooted as normal.
Tried using *#1234# and received this:
AP: P5100XWALE3
CP: P5100XXLD7
CSC: P5100XSAALE1
When I connected to Kies I now see this:
"Your devices current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LE3 / PHONE:LD7 / CSC:LE1 (TTT)
I assumed rightly or wrongly that the country designator should have changed to XSA. Does anyone have any idea if I have missed something in the process?
I checked Setting > About Device:
Model Number:
GT-P5100
Android version:
4.0.3
Baseband version:
P5100XXLD7
Kernel version:
3.0.8-546364-user
[email protected]#1
Build Number:
IML74K.P5100XWALE3
Within status, device status is normal
Appreciate any advice you can offer.
Cheers Paul
Click to expand...
Click to collapse
Managed to solve the problem by performing a factory reset. Devices now display XSA in Kies
Hi everyone,
I bought a S8+ 3 years ago for my wife when we were living in China. They told me it was a US version with 1 SIM slot. It worked well for the years and had some chinese preinstalled apps, but it had google (China has some legal issues with google so most of the phones don't come with google apps installed or allowed).
Today, I did a factory reset to it since I got another phone for my wife and I want to use it as my work phone and I realized Its still on android 7 (tried updating the software in the phone menu and it says it up to date but still on android 7)
I checked the phone and software info and it says:
-Model Number: SM-G9550
-Hardware version REV1.0
-Android Version 7.0
-Samsung Experience version 8.1
-Baseband version G9550ZCU1AQEE
-Kernel version: 4.4.16-11449429 [email protected] #1 Wed May 24 14:13:30 KST 2017
-Build number NRD90M.G9550ZCU1AQEE
So then I decided to download Odin and the right firmware from sammobile since they have official ones for Samsung. I downloaded a SM-G9550 for China Android 9 Build date Mon, 19 Oct 2020. I tried flashing it but it says it failed. It didn't do anything to my phone (at least it didn't brick it nor it should since I checked everything to make sure)
Since this is not normal, I decided to go check the version when I press the buttons Bixby + Vol. Down + Power and found the following info:
-CARRIER: ATT
-RPMB fuse blown
-RPMB PROVISIONED
-CURRENT BINARY: Samsung Official
-SYSTEM STATUS: Official
-FRP LOCK: OFF
-WARRANTY VOID: 0X0
-QUALCOMM SECUREBOOT: ENABLE
-RP SWREV: B1(1,1,1,1,1) K1 S1
-SECURE DOWNLOAD: ENABLE
-DID: 205E5F695E33
At this point i'm concerned in why does it says carrier ATT, so I checked the menu when pressing the buttons Bixby + Vol. Up + Power and the following info is displayed on the top:
-Android Recovery
-samsung/dream2qltesq/dream2qltesq
-7.0/NRD90M/G955USQU1AQEF
Very confusing for me, since I never encountered this before. And I assume my phone as been rooted.... since I searched what dream2qltesq was, and its for rooting the S8+. Sucks.
Now i'm concerned and don't know which model to flash (G9550 from China or G955U from US)
Can anyone help me with this problem and some questions that I have:
1- I want to flash a newer version, which one should I download and flash then? (G9550 from China or G955U from US) (I don't need any of the chinese apps, never used them)
2- If its ATT carrier, will flashing to a G955U version of ATT lock my phone?
I just want my phone to work well with newer version in English with google in a Official Samsung Rom for S8+.
Really appreciate beforehand any help.
Thanks!
TJ
Pulled an old but pristine S7 out of a drawer to give as a first-phone to my nephew. Annnd it's locked to a Google account I don't have any ****ing IDEA what it is. ****ed by FRP.
I found a Google Drive link on this site that said it had the stock files but the link is long dead.
I already have ODIN and know how to put it in BOOTLOADER (not just recovery) mode. Is there somewhere to get the right files to get rid of FRP?
IMEI check came back with this:
Model Info: MOBILE SM-G930V BLACK VZW
Search Term: 355301074345102
IMEI 1: 355301074345102
Serial Number: R38H3123FPZ
Model Desc: Model Desc: Galaxy S7
Model Name: SM-G930V
Model Number: SM-G930VZKAVZW
Warranty Status: Out of Warranty
Estimated Warranty End Date: 25-03-2018
Production location: Korea SEC
Production Date: 25-03-2016
Country: United States
Carrier: Verizon
GSMA Blacklist Status: Clean
Restructured my previous thread that was rushed to include all that I missed.
I bought this phone second hand from a friend with a smashed screen, I replaced the screen and it had a password so I blanked it using buttons (mate wasn't happy to give me password there and then) *and my impatience got me.
I thought I could OneClick it through test point since it was (still is) opened.
I wasnt getting anywhere with FRP removal, then I think I pressed All + Dload with just preloader selected or something.....
Since that it just loops on Brom no download mode etc
I can still bypass protection and get it to flashing point but no matter which firmware I try, It errors from U1 OS11 to U5 OS13.
Two errors are:
1: ANTI ROLE BACK
2: STATUS_SEC_IMGHDR_TYPE_MISMATCH (0XC0020029)
I've included below my Model which I pulled from IMEI checker.
WIlling to pay and teamview for someone to fix if it comes to that.
SM-A226B GRAY EUA
Model Desc: Samsung Galaxy A22 5G
Model Name: SM-A226B
Model Number: SM-A226BZAUEUA
Production location: Korea SEC
Production Date: 16-03-2022
Country: United Kingdom
Carrier: Factory Unlocked