I recently got a brand new black Verizon S7 and my question is about the home button.On the other S7s it seems to have some sort of horizontal lines on it and on mine they are not present,it's like there is some sort of firm on it,but I don't think it is a protector or anything.Also,on the back of the phone is just the Samsung logo and not the other small printings that are present on the lower part of it's back.Should I be concerned?
Hello XDA!
I recently upgraded from a z3c to XZ2c, it was under warranty but they couldn't repair the phone/find the part needed so I got upgraded to XZ2c yay!!!!
I'm aware of the chaos behind screen protectors and that curved screen >.>
I saw this ting called 'full AB glue', it has glue through the whole screen and seems different from the other screen protectors around
does anyone have an opinion/experience with them?
a simple youtube search 'ab glue screen protectors' will show you a video of someone applying it - can't link I'm new to XDA
You could try and find a store who can install clearplex. Its the best screenprotector i ever installed on my phone. Tomorrow i could add a picture from the result, just received a xz2c.
A 1 week later i bought a tempered glass fingerprint work from ebay and is not good.it has already slipped off the edges and the imprint goes very rarely and hard.do you use some protective foil or glass that goes the imprint and can you recommend it to me?
Hi,
For me no protection is far better than all other solution (also dom glass)
The general expérience is far better (touch feeling, colour, reflectance,...)
But you need to be more careful with your phone (avoid keys or sands contact and clean it every day with soft Cloth ). For me after 1 month like this I have no scratch or other things.
deraiz12 said:
Hi,
For me no protection is far better than all other solution (also dom glass)
The general expérience is far better (touch feeling, colour, reflectance,...)
But you need to be more careful with your phone (avoid keys or sands contact and clean it every day with soft Cloth ). For me after 1 month like this I have no scratch or other things.
Click to expand...
Click to collapse
Yes. I believe you. but I am not very careful I drop them a lot on foot. i think cornimg gorilla glass 6 is very ok and does not break so fast or scratch but yet ..
the biggest problem is that i don't find what global firmware to put because it is taken from amercia the snapdragon version and i don't have the language of my region because it is taken from verizon. could you help me?
Sorry but no.
Buy armfim screen protector
Better than white dome and finger print actually working.
Hi,
The better I've tested since now is LK screen protector.
No change in colour and touch feeling and also seem to be more protective than OEM one (auto repair scratch).
I try this for 2 days now with an OEM leather case and so far so good the feeling is pretty good in hand (better than hell classical TPU case....) and descent protection .
Bogdan Ionescu said:
Yes. I believe you. but I am not very careful I drop them a lot on foot. i think cornimg gorilla glass 6 is very ok and does not break so fast or scratch but yet ..
the biggest problem is that i don't find what global firmware to put because it is taken from amercia the snapdragon version and i don't have the language of my region because it is taken from verizon. could you help me?
Click to expand...
Click to collapse
My device is originally Verizon unlocked. Flashed the latest firmware using odin. There's a thread here in this forum that explains everything.
Salbawardi2 said:
My device is originally Verizon unlocked. Flashed the latest firmware using odin. There's a thread here in this forum that explains everything.
Click to expand...
Click to collapse
I m looking and i don t found...
I am using Invisible Shield Ultra Clear and it works great.
I replaced my broken Whitestone with the Mocolo UV nanoptics. It costs about the 1/4 of the Whitestone and it works and feels exactly the same. That means that the fingerprint reader works at about its 85-90% of its original cabability.
Any new cheap glass protectors on the market? I'm looking for something full adhesive edge to edge. FPS compatibility is not too critical but if it works without applying UV glue that would be great.
I ended up avoiding fingerprint unlock because it never works on the first try with my screen protector. That's the only thing I don't like about this device
Been using the apiker film for a week or so, 4 for $10 or whatever. Had an alignement jig, i wasn't super careful about cleaning, should've installed in the bathroom. Works really well, no problem with finger print. There's two spots on each side where it has popped up a little from taking my case on and off a feew times.
Just ordered the johncase tempered from Amazon, has the little uv light, pack of two for $15. See what happens.
My fps works correctly at least 9 times out of 10. I just registered my most frequently used finger, the right thumb, two times. One when it was completely dry and one more time when it was wet. Now I rarely loose a scanning.
Hi everyone,
I did a quick search and didn't see this asked yet
I have the note 10+ and it came with a pre applied screen protector which was very nice.
If it doesn't I will end up returning it because a device this much should have one installed and it's really hard installing yourself.
worldsoutro said:
Hi everyone,
I did a quick search and didn't see this asked yet
I have the note 10+ and it came with a pre applied screen protector which was very nice.
If it doesn't I will end up returning it because a device this much should have one installed and it's really hard installing yourself.
Click to expand...
Click to collapse
You're going to return it if it doesn't come with a pre applied screen protector? Thanks for the laugh
US version does not come with a screen protector like the international variants do. It just has a tear away plastic protector on the front and back. Odd choice by Samsung to put it on some phones but not all, but whatever.
Semantics said:
US version does not come with a screen protector like the international variants do. It just has a tear away plastic protector on the front and back. Odd choice by Samsung to put it on some phones but not all, but whatever.
Click to expand...
Click to collapse
At least they get the Snapdragon CPU. I'd rather have that and no screen protector than Exynos with screen protector.
No protector on the US version.
Well yeah, after 3 months of usage, the screen protector over my zflip3 carcked.
I was wondering what have you guys did.
Any brand protector suggestion o should I go straight to the uncle Sammy shop?
Pre Installed Screen Protector is coming off
As the title says the pre installed screen protector is coming off my phone. What is my best solution to it, having Samsung fix it, use Samsung Care+ to fix it, or take it off my self and install a third party one? Is doing a third party one...
forum.xda-developers.com
Screen starting to peel - Samsung Care+?
Bought the one in October and the screen protector is beginning to peel/ fray in the middle. I've got Samsung Care+ which allows me to make two claims per year. Wondering if I should use it for this or if Samsung has anything along the lines of...
forum.xda-developers.com
Experience replacing screen protector
Wish I had taken some photos, but my screen protector had started to crack a bit at the seam point on my Flip 3. I started doing some research and it appeared it was possible to get a screen protector replacement through Samsung to maintain...
forum.xda-developers.com
The best screen protector secured at last!
After many months of scouring the internet and more money spent than I'd like to admit, I have finally found what I would consider a better screen protector than even the OEM installed one from Samsung. I have tried close to 10 different...
forum.xda-developers.com
I could probably keep going, but that should be enough to get started.