Moderator edit: This thread is unauthorized advertising and has been locked. For more information and discussion on this product, please refer to the approved thread here.
But does the rock hard polycarbonate back make contact with the back of the phone? If so it's only a matter of time before the back of your very expensive phone phone becomes scuffed from the case.
hand-filer said:
But does the rock hard polycarbonate back make contact with the back of the phone? If so it's only a matter of time before the back of your very expensive phone phone becomes scuffed from the case.
Click to expand...
Click to collapse
There are lips on the back, it is actually isolate the back from toughing the flat surface!
blueisharpersdog said:
There are lips on the back, it is actually isolate the back from toughing the flat surface!
Click to expand...
Click to collapse
Thanks for confirming. Too bad the manufacturer didn't take the time to respond to my inquiry.
hand-filer said:
Thanks for confirming. Too bad the manufacturer didn't take the time to respond to my inquiry.
Click to expand...
Click to collapse
They responsed to me in 2 days.
Yeah I agree here. I've got an R series in red and a black back, and I love it. I've got a V series I need to test out as well, but I like to give the cases a good week before I swap. And the "R" is a quality case.
Okay I'm convinced now. Just placed an order for the R series in blue anodized.
I just unconvinced myself. The misaligned orange stick-on bumpers werent doing it for me.
They just seem like an afterthought that corrects a design flaw.
Went ahead and ordered a blue one
Well, I was gonna wait a few days of using this case before I wrote my review, but since there already are reviews up, here I go. Disclaimer: I was given a free case for my honest opinion. The following is my opinion without any input from the manufacturer.
When shopping for cases, I didn't want a blacked out case obscuring the great colors of the S22 Ultra, but I didn't want a generic looking clear TPU shell. In comes the CaseBorne R Series case with an aluminum frame. I chose the Iridescent version since it was potentially the most interesting. Normal prime shipping got it here to me 1 day after my S22U arrived, no complaints there.
First impression:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case arrived in a standard box that you would normally see in cases. It rests inside a plastic shell and seems well protected for transport. There was a clear film on both sides of the case that you should remove prior to installing.
Closer look:
The clear back is a dot-matrix style. It is pretty much impossible to see this unless you hold it up to the light, but it is there in case that bothers you.
Installed:
My phone has a UV based TGSP installed, and the case does not interfere with the TGSP on the edges or corners. Once installed, the iridescent frame looks very cool. In this particular shot, the light reflected off my ceiling lights and work LED lamp made it a shade of green that matches very well with the S22. It should be noted that the top and bottom rails are more of a purple color that reminds me of heated titanium.
Here we see that the case does indeed lift the phone off of the table, preventing the camera and screen from touching potentially damaging surfaces.
Conclusion:
This case does a good job at protecting the phone on all sides while letting the actual phone shine through. Unfortunately, I didn't want to conduct a drop test, since I don't have the disposable funds to test it that way. I am very rough with my phone though, and many phones have gone out of my pocket like a frisbee in the past. Once I have more drop (frisbee) data to share, I will update this review. For the time being, this seems to be a very solid case.
craznazn said:
Well, I was gonna wait a few days of using this case before I wrote my review, but since there already are reviews up, here I go. Disclaimer: I was given a free case for my honest opinion. The following is my opinion without any input from the manufacturer.
When shopping for cases, I didn't want a blacked out case obscuring the great colors of the S22 Ultra, but I didn't want a generic looking clear TPU shell. In comes the CaseBorne R Series case with an aluminum frame. I chose the Iridescent version since it was potentially the most interesting. Normal prime shipping got it here to me 1 day after my S22U arrived, no complaints there.
First impression:
The case arrived in a standard box that you would normally see in cases. It rests inside a plastic shell and seems well protected for transport. There was a clear film on both sides of the case that you should remove prior to installing.
Closer look:
The clear back is a dot-matrix style. It is pretty much impossible to see this unless you hold it up to the light, but it is there in case that bothers you.
Installed:
My phone has a UV based TGSP installed, and the case does not interfere with the TGSP on the edges or corners. Once installed, the iridescent frame looks very cool. In this particular shot, the light reflected off my ceiling lights and work LED lamp made it a shade of green that matches very well with the S22. It should be noted that the top and bottom rails are more of a purple color that reminds me of heated titanium.
Here we see that the case does indeed lift the phone off of the table, preventing the camera and screen from touching potentially damaging surfaces.
Conclusion:
This case does a good job at protecting the phone on all sides while letting the actual phone shine through. Unfortunately, I didn't want to conduct a drop test, since I don't have the disposable funds to test it that way. I am very rough with my phone though, and many phones have gone out of my pocket like a frisbee in the past. Once I have more drop (frisbee) data to share, I will update this review. For the time being, this seems to be a very solid case.
Click to expand...
Click to collapse
Mind to share your review on Amazon?
Super durable and not as bulky as otter box. I love the style and feel. I even convinced my husband to the red and black carbon one. His is even better since the carbon feels soft. I’ve dropped my phone a couple times already and no damage occurred
FarmRoad423 said:
Super durable and not as bulky as otter box. I love the style and feel. I even convinced my husband to the red and black carbon one. His is even better since the carbon feels soft. I’ve dropped my phone a couple times already and no damage occurred
Click to expand...
Click to collapse
Did you try to put on a tempered glass screen protector?
These are some nice cases. Reminds me of some of my favorites for the Note 4 namely the Spigen Neo Hybrid Metal.
Assimilator702 said:
These are some nice cases. Reminds me of some of my favorites for the Note 4 namely the Spigen Neo Hybrid Metal.
Click to expand...
Click to collapse
It is totally different than spigen. It is much more protective. It also has the alumnum frame.
I’m very surprised that this case isn’t getting as many reviews as it has, because this is an amazing case. The edges are raised much more than other cases of its class/price point, and offers protection front and back. The corners are also slightly thicker to protect against those deadly corner drops, and the case hasn’t had an issue staying on my case. The back isn’t too slippery as other clear cases might be, and is just overall slick looking and think.
Review of 5 cases including Caseborne R and V:
My 3 main criteria when selecting a case are:
1. A reasonable amount of protection if dropped.
2. A good comfortable non-slip grip so I avoid dropping it in the first place - especially if my fingers are either cold or sweaty. This also includes being comfortable to hold to your ear when on a call.
3. Designed so it lays flat when placed on on a desk - ie no wobble when touching the screen.
My go-to case for the past 12 years has always been the UAG Monarch, but I am really disappointed with the one produced for the S22 Ultra. Although I really like the look of it - especially the individual camera cutouts and it still offers 'top of class' protection, they have for some strange reason completely eliminated the great contoured sides and replaced with a slight 'tire-track' pattern that you can barely feel and which is not at all grippy.
The following photo shows the previous design with the new one below:
So I decided to test out the following 4 cases (I bought all of them so this review not influenced by a free case)
1. Spigen Cryo Armor
2. CaseBorne V
3. CaseBorne R Aramid Fiber
4. Poetic Neon Series
1. Spigen Cryo: although dubious about it claim to keep the phone cool, it did look cool. However it offered almost no side protection (the screen was higher than the side of the case). It also although quiet grippy was not that comfortable to hold for a long time especially when making calls - so eliminated.
2. Caseborne V: it offers fantastic protection and a comfortable grip, however I felt that is added too much bulk to an already large phone - so eliminated.
3. Poetic Neon: it looks really nice and has great protection, but it consists of an inner soft rubber liner and a hard plastic outer shell and I did not like the grip on the shell part. You can see in the photo that I actually removed part of the shell to give a better grip and this is now the case that I may use when i plan to hold the phone for a long time (eg reading an ebook) as it is really comfortable and secure to hold.
4. CaseBorne R: This was by far for me the best case. Although the side are smooth, they are remarkable grippy and the case offers great protection - both at the top and on the sides. It is also confortable when making a call as the back is also quite grippy. My only 2 gripes is that for the price point, I wish it had the individual camera cutouts like the UAG case and it is a fingerprint magnet as you can see in the photo. [it also comes with a thin plastic film on the inside that I intend to leave there to stop the case from scatching the back of the phone].
The following shows the Poetic (modified), the Caseborne R and the UAT Monarch (I already returned the other 2). All 3 lie flat on a desk. The 3 cases are lined up along the bottom to show relative height :
Left to right: Poetic, Monarch and Caseborne
You can see I tried to carve our the pattern on the UAG case to make it more grippy, but with minimal improvement!
1.
***Moderator announcement***
This thread is unauthorized advertising and has been closed.
Related
Hi guys, I just wanted to give my review on the case that I've finally settled on! It took me forever to finally decide on a case, but I finally made my choice and I couldn't be happier. I originally had the Silicone case from the T-Mobile store, but that case just wasn't to my liking.
Up first is the link: http://www.ebay.com/itm/YOOBAO-TPU-case-Skin-Cover-HTC-Sensation-4G-Z710e-/220837531137?pt=PDA_Accessories&hash=item336af14e01
Nice price for a high quality case for sure. Item took me 9 days to get from the time I ordered it, which isn't at all bad considering it ships from Hong Kong and I'm in California.
The breakdown: this is a lightweight case (AKA not a competitor to the Case Mate Tough and similar heavy-duty cases) that is made out of 2 materials. It is both TPU and Polycarbonate (plastic). The parts that are plastic are where the 2 wedge-shaped pieces on the back of the phone are (above and below the swoosh).
My review: my primary reason for getting a new case was because the T-Mobile gel case was too loose. It felt like a pair of baggy pants on a skinny kid (Take it from a skinny person that that feeling is really uncomfortable). First up is the packaging:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice packaging, comes with a screen protector and cloth inside (I haven't put the screen protector on yet so I'll report on that later). The most noticeable things about the packaging are the comical errors in grammar and spelling, but I couldn't care less about that when I like the product .
I read good things about TPU cases being much tighter than Silicone, and the Yoobao case is certainly a good example of that. Out of the box, it is much more resistant to flexing and takes a bit of an effort to actually put the phone into. BIG plus for me. It's very form fitting and tight on the phone. It's also a thin case, which was instantly noticeable because in the hand it feels more like a naked Sensation than the T-Mob case did. That's not to say it provides no protection, because the combination of TPU and PC makes it feel quite strong for a thin case. Also, let's be honest that most people looking for thin TPU cases aren't looking for the most hardcore in protection. I'm sure the Yoobao will do fine in minor drop situations.
The cutouts on this case are close to perfection.
The headphones jack is fine for the headphones I use. It's about the same size that the cutout on the T-Mob case is.
The cutouts on the top half. As you can see, Yoobao included cutouts for every place where they are needed. 2 things I really like here: the first, that the cutouts are perfectly placed (the mic holes are perfectly centered in each cutout, which is rare), the second, that there is a separate cutout for the camera and the flash. Most cases have one big hole for both the camera and the flash, and the fact that this has individual cutouts exudes quality.
Cutouts at the bottom. This is a pretty bad picture because the mic holes are better centered than the pic makes it look like. Again, nice that they have individual cutouts.
Terrible picture, I know, but I just wanted to show that even the bottom mic hole has a cutout (which like the others is perfectly aligned).
This is the ONLY thing I don't like about the case. While (looking at the cutout from this orientation) the left and right sides of the cutout provide plenty of space, the top part is just barely too thick.
As you can see from the bump, it's just a little too tight for the charger. It's still easy to get the charger in, it's just that it pushes the TPU up right there.
It's a very minor issue, and I'm sure you could easily take a knife to it to make it fit better. This is legitimately the only thing I would change about this case.
The looks:
The looks of this case were probably the main reason I chose it over others. I personally wanted a light case that preserves the looks of the naked Sensation as much as possible, and I don't think you can do any better than this case. I obviously went with the black model, but there is also a white model. The TPU is translucent, and in decent light the case is a dark smoked color (it's really only in low light that it looks completely black). Really sexy color, and it's awesome that you can see the htc logo on the back. The other main case I looked at was the Qubits one that is very popular, but I liked how the Yoobao allows you to see the actual swoosh and htc on the back, rather than an opaque black swoosh that merely imitates the phone. The plastic pieces are so well done that they look just like the phone underneath.
I thought that this picture demonstrated how smooth the transition is from PC to TPU. It's really only a transition that you can feel; you can't see it because it's so smooth.
Other things to note:
The TPU comes up over the lip around the phone like most cases do. It's thin, so when you place the phone face down the screen is just barely off the surface. I didn't include this as a negative thing because I don't have any personal experiences with other cases other than the T-Mob one (which definitely does provide a bigger lip), and I've also heard that TPU cases don't give as much a lip as Silicone cases do.
The power button is harder to press down, but I also didn't include this as a negative because I've heard the same about many TPU cases. The volume rocker also takes a little bit more effort. Both of them are covered by clear TPU that isn't smoked, so it's kinda cool that they are showing off the metal pieces on the phone.
It's not as grippy as a pure silicone case because it can slide around a bit on the plastic parts. I personally think it's grippy enough and enjoy how easy it is to slide in my pants.
Summary: this case is about as good as a lightweight case can get. If you aren't looking for hardcore protection, I absolutely recommend the Yoobao case. It looks great, feels great, adds minimal bulk, fits tightly, and has near-perfect cutouts. IMO no other case out there does a better job of preserving the Sensation's design, and no other case can match how well done the cutouts other than the USB cutout are. I might buy another one just to have an extra because I like it so much. If you have any questions, feel free to let me know.
It's just like any other tpu "twill design" cases. It's just branded that's all.
Nice review. I got one that is unbranded. Don't use it no more.
nicky041192 said:
It's just like any other tpu "twill design" cases. It's just branded that's all.
Nice review. I got one that is unbranded. Don't use it no more.
Click to expand...
Click to collapse
Actually its not, yeah, it might be kind of similar but imo this design is much better. The twill design does go over the top and bottom of the phone
Sent from my Sensation using XDA App
Xcor3 said:
Actually its not, yeah, it might be kind of similar but imo this design is much better. The twill design does go over the top and bottom of the phone
Sent from my Sensation using XDA App
Click to expand...
Click to collapse
Ahh just noticed the difference. The matte covers the top and the bottom where the Yoobao doesn't.
Does the screen protector cover the whole front glass? or just he visible screen?
Sorry to hijack your thread but I do have a white one for sale for weeks but one person asked about it and never followed through. The one I have was never used. I just put it on for testing purposes, but ended up not using it. The fs thread is in the marketplace here or you can PM me for details. I don't want to detract the thread by posting pics and such .
Back to topic...
Great detailed review my friend!
can't link yet, but go to amazon.com and type in "HTC SENSATION 4G / SENSATION XE GEL SKIN CASE"
is this suppose to be the same case??
I just got these case myself last week. I love the fact that it fits inside my OEM HTC Leather case. I had to apply little shoe stretch on the sides. But the phone fits perfectly. I was considering the expensive Seidio case and holster...but the Yoobao TPU & Screensaver and the OEM leather case were a great deal at about $20 shipped total on ebay.
nicky041192 said:
Ahh just noticed the difference. The matte covers the top and the bottom where the Yoobao doesn't.
Does the screen protector cover the whole front glass? or just he visible screen?
Click to expand...
Click to collapse
Not sure what you're talking about. The Yoobao case covers the top and bottom just like any other case (it wraps around the front at all sides, providing a lip around the whole phone just like most other cases). And I haven't tried the screen protector yet.
Great Review!
I actually was considering this case, but the Yoobao was a big turn off for me. Has anyone found a way to cover up/scratch it off?
I am sure Goof off would take it off.
Sent from my HTC Sensation 4G using Tapatalk
Fr3sh2De4th said:
Great Review!
I actually was considering this case, but the Yoobao was a big turn off for me. Has anyone found a way to cover up/scratch it off?
Click to expand...
Click to collapse
buy one without yooboo on it. search for 'twill gel case'
I must add something, the screen protector that comes with this Yoobao cover fits the screen a 100% and with a little heat and dust free environment applies perfectly.
I just receive mine today and quickly put the OtterBox Commuter in my drawer.
I must thanks the OP, this is an awesome purchase.
This case is awesome. Thanks OP for the find!
cmarti said:
I must add something, the screen protector that comes with this Yoobao cover fits the screen a 100% and with a little heat and dust free environment applies perfectly.
I just receive mine today and quickly put the OtterBox Commuter in my drawer.
I must thanks the OP, this is an awesome purchase.
Click to expand...
Click to collapse
I know I said I was going to do an update when I installed the screen protector; obviously I put that off for a long time. Anyways I did install it and it's exactly like you describe. Applied incredibly easily, no bubbles, fits perfectly, and it even has a little bit of a cutout for the light sensor. Awesome screen protector to complement an equally awesome case.
Just wanted to give this a little bump to update and for others to see this review who haven't yet.
I bought this case; did anyone try removing the yoobao logo with goo-off? if not, i'll guess i'll be the 1st one to try since i bought a clear(white) case and have a white beats back case to go with it....
KingP1n said:
I bought this case; did anyone try removing the yoobao logo with goo-off? if not, i'll guess i'll be the 1st one to try since i bought a clear(white) case and have a white beats back case to go with it....
Click to expand...
Click to collapse
I've had past success with goo gone. The goo off is the more paint thinner smelling than the goo gone right? I recently took off the Aprolink logo from my hybrid case.
The goo gone is the one that smells like citrus. I use that stuff to take off adhesives from car finishes as well.
Hi everyone,
I've spent almost a week now with my N4 and these two cases and I'm ready to share my opinions about them. I'll start with the Nillkin flip PU leather "tree-like" case:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I chose the green one, it seemed special on ebay. The images from the Galaxy S III here distort the colors a little, but it's quite close to what was promised.
Case Quality
The feeling of the case is quite far from leather. I inspected it with a macro lens, and it's actually made out of a spongy material layered on hard plastic. It feels like fabric, which was disappointing. The interior of the case's flip is nice microfiber-like brown fabric which looks and feels good. The "hinge" of the flip is just the same spongy material without hard plastic inside, but it's made well enough so I guess it won't tear quickly. The cuts are OK, but their edges are not perfectly precise. It's not a practical issue, but if your'e picky it might look annoying to you.
The case also came with front and back screen protectors. The one for the back is perfect, but does not have a cut for the camera - only for the flash. It's good to have the camera protected but I don't know how bad is it for image quality. The front protector is too small in my opinion. it covers the screen well side to side, but leaves too much flat space uncovered on the top and bottom. The protector itself is nice and clear, catches fingerprints much faster than the glass (as all protectors do) and does not scratch easily. I removed and applied it several times, and with some duct tape managed to avoid bubbles altogether. It is thick so you can notice it, but overall it's a great added value.
Usability
There are cuts for all the necessary things like buttons and ports. NFC works through the case as usual and reception won't deteriorate. All the buttons are as easy to press as they normally are, which is quite hard. The flip closes properly on the screen and covers it well. However, there are no magnets to keep it in place so if the device falls, you can only hope it stays closed all the way down. when on a table, the flip won't open by itself, and if it does, you can squash the "hinge" part along the joints to make it stay closed.
When the flip is on the back of the device, it hides the camera, so taking pictures is the only thing you should do with the flip dangling from the side. I don't think it's that bad because it's flexible and easy to manage. You can also make it sit quite flat with the back of the device so it won't bother you when operating the device with one hand. The spongy exterior is nice to hold in hand, and won't slip. It grips tables and so much better than the naked N4, but not as well as TPU. It's also easy to put inside pockets, even with tight Jeans. The case's bezels are raised for protection and grip around the screen, but will sometimes bother when trying to use gestures that start out of the screen like in Chrome.
Conclusion
The case adds relatively very little thickness to the device, and overall I'm pleased with it and use it mostly outside when I want the extra protection.
The Meifeng Quicksand case
I chose the bordeau one, that seems almost like skin tone on ebay. The actual color varies greatly in different lightning conditions, so be aware that it might look pink or purple sometimes.
Case Quality
This case has perfect cuts and perfect shape. There's nothing more I can say, it's just thin, precise and beautiful. The bezels are low, but high enough with the four corners slightly raised so the front glass won't touch the table, and the edges don't bother your finger. The feel is extremely unique, it does feel like rock but it's also soft and it's a pleasure to hold and feel. The plastic is slightly flexible which means it won't break over time like those hard Casemate ones I saw chipping in the past. This case won't ever show fingerprints, a great bonus.
This case also came with a screen protector. It covers more glass than the Nillkin one, but it's too reflective, almost like a mirror, so I didn't use it.
Usability
The case is very thin, but not thin enough to feel fragile. I think it's ideal. it's shape on the back is simple, the device's lines are almost invisible. It leaves large cuts for the buttons so they are easy to push, and it also rises slightly above the top and bottom to minimize impact chances on these parts. The only drawback with this case is that it's relatively slippery when held in dry hands and colder weather, so it requires some extra care. It also won't grip surfaces very well like TPU and silicon do.
Conclusion
I think this case is perfect. It looks and feels fantastic, gets lots of thumbs up and protects the device well enough. for ~7$ It's a steal, and you can pick more conservative colors. I don't like the "Meifeng" logo on the back, but it's not that bad.
Excellent thorough reviews... they've made me realise how happy I am with my black Diztronic TPU case!
Nice review. They look good imo.
I'm just not a fan of the open hardware buttons & really wish it had a stand, kind of like this one:
http://img02.taobaocdn.com/imgextra/i2/57333600/T2.OC_XdJXXXXXXXXX_!!57333600.jpg
Thanks OP!
I had my N4 for 2+ months now. Have been using it with the official bumper, but most of the time with the s-line tpu case.
Just got my gray quicksand case. I must say I am liking it. Minimal bulk, lightweight. Buttons are easy to press since they are not covered. It does leave the top and bottom open especially the chrome edge which is prone to scratching, so unless I know I am at the desk the whole day I will probably stick to the "safer" s-line.
Sent from my Nexus 4 using xda app-developers app
amazing review,amazing hd photos!
im going to buy from a friend a nillkin case and hope that i like it!
Thanks you for the review, it's really helpfull. I have the other Nillkin case, the more leathery one (but not the "fresh"). Those case are well worth the money.
Gotta chime in with the rest here, brilliant review! The Quicksand case looks interesting but I'm worried the textured back will get annoying after a while...considering whether I should play it safe and just get matte.
The quality on it isn't great. It lasted me <month as did my second one and a friends. Any idea to a very similar case of good quality and build. Somewhat like the Samsung flip case?
Great reviews and pictures. I own both and they are great cases each with different purposes and well worth their price.
OOT:
What wall paper is that
After readin this review I bought the Quicksand Black case.
I have used 3 other cases including the official bumper case before acquiring this one.
For me hands down my fav case. Great fit, good price, and good looking.
Thanks OP
mufc09 said:
The quality on it isn't great. It lasted me <month as did my second one and a friends. Any idea to a very similar case of good quality and build. Somewhat like the Samsung flip case?
Click to expand...
Click to collapse
Agreed. It deteriorated quite quickly, some of the seams broke open and it caught grease from hands after a few months of use. As it seems, the new Nillkin Fresh cases have tighter seams and made tougher.
bobola said:
OOT:
What wall paper is that
Click to expand...
Click to collapse
http://www.nasc.fr/wp-content/make-and-love-pixel-art.png
Cut it to 1280 pixels high (if using paranoid android with opaque bars) or 1195 pixels if using stock android, and leave the width. When applying through gallery, stretch the square as large as you can so you'll get 1:1 pixel ratio between image and display. If on the device when setting as wallpaper you get a kind of cross instead of a square, download Quickpic and set WP with it.
I've complained so I hope to get a new one. As you say, hopefully it's a new batch because for the brief time it was good, I loved it.
This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel so it helps with grip. Finger prints do show on the case (some people with dry hands will not have an issue. My hands are normally moist.) but can be easily wiped away.
Normally the hybrid cases with PC (polycarbonate) on the back and TPU on the sides that cover the buttons give them a mushy feeling when pressed. It is hard to tell if you pushed the button all the way down or not. So with the cut outs for the power and volume button, this problem is eliminated. The plastic which separates the two buttons help me to identify each button quickly. I also found the buttons were unintentionally pressed a lot when I didn't have the case. I don't have this issue anymore. I would recommend this case for anyone who wants protection against scratches. It won't protect the phone against high drops. There is no cushion or air pockets to protect the phone. But this is exactly what these thin cases are for, scratch protection and protection against small bumps. I bought it at Amazon. I ordered it around noon Pacific Time and it was shipped after two hours. I was pleased with the speedy handling.
Please check out the pictures below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update...this sounds silly but the case seems to make the phone feel heavier to me. But the added weight feels good in the hand. The case by itself is not heavy. Not sure why I feel this way...
Update # 2: 24 hours later, I am still loving this case. The finger print scanner cut out is the perfect size. I have not had any issues unlocking my phone. I actually wanted a clear case but this black color is starting to grow on me. With the camera visor being glossy black and the case being flat black, it adds a stealth look along with providing some contrast.
Update # 3: The case's matte finish does not create too much friction when inserting the phone into your jean packet or pulling it out. This is a plus.
forum.xda-developers.com/nexus-6p/accessories/spigen-t3213191
minhtluu said:
This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel to it helps with grip. Finger prints do show on the case but can be easily wiped away.
Please check out the pictures below:
https://goo.gl/photos/vqvrASNWxK9Q7fey7
https://goo.gl/photos/hvcbsuXJv4u2Sihp8
https://goo.gl/photos/nKYsUJArmK3EiCin7
https://goo.gl/photos/HiJwzh9kNUFMCmCf6
I don't usually post pictures on here so I didn't know how to embed them into the open post.
Click to expand...
Click to collapse
Looks nice, I'm usually pretty impressed with Spigen cases. I ordered this one: http://www.spigen.com/products/nexus-6p-case-rugged-armor hopefully it gets here soon because I'm not a huge fan of the Ringke case I have now.
mlin said:
Looks nice, I'm usually pretty impressed with Spigen cases. I ordered this one: http://www.spigen.com/products/nexus-6p-case-rugged-armor hopefully it gets here soon because I'm not a huge fan of the Ringke case I have now.
Click to expand...
Click to collapse
What don't you like about Ringke? The Rugged Armor is rubbish.
anglerstock said:
What don't you like about Ringke? The Rugged Armor is rubbish.
Click to expand...
Click to collapse
Seems many buyers on Amazon would disagree with you. Three main things I don't like about the Ringke:
1) I don't really like the feel of the case
2) Its a fingerprint magnet, unlike anything I've ever experienced.
3) The front edges are kind of sharp which can make it a little uncomfortable to hold against my ear while on the phone.
If only Otterbox made the Symmetry series for the Nexus 6p and all my future phones, I'd never have to shop around for cases again.
This case is pretty excellent - feels grippy & solid
mlin said:
Seems many buyers on Amazon would disagree with you. Three main things I don't like about the Ringke:
1) I don't really like the feel of the case
2) Its a fingerprint magnet, unlike anything I've ever experienced.
3) The front edges are kind of sharp which can make it a little uncomfortable to hold against my ear while on the phone.
If only Otterbox made the Symmetry series for the Nexus 6p and all my future phones, I'd never have to shop around for cases again.
Click to expand...
Click to collapse
Lol I was going to say that many buyers on Amazon would disagree with you about Ringke, but I guess you know that buyers go with the flow most of the time. All of what you said is true for the Rugged Armor, which are the reasons why I don't like it. And also it is sand magnet too. That's my real life feedback. I am sure the Amazon buyers will disagree
anglerstock said:
Lol I was going to say that many buyers on Amazon would disagree with you about Ringke, but I guess you know that buyers go with the flow most of the time. All of what you said is true for the Rugged Armor, which are the reasons why I don't like it. And also it is sand magnet too. That's my real life feedback. I am sure the Amazon buyers will disagree
Click to expand...
Click to collapse
Ultimately I can just return it if I dont like it. The inconvenience of owning an unpopular phone and being unable to try a product hands on before purchase, but at least Amazon has a solid return policy.
minhtluu said:
This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel to it helps with grip. Finger prints do show on the case but can be easily wiped away.
I don't usually post pictures on here so I didn't know how to embed them into the open post.
Click to expand...
Click to collapse
I love it, except that the upper and lower machined extreme edges aren't protected from certain angles.
I've never been a big fan of cases, especially on beautiful devices like this one - but you just sold me on this case. Great pics!
ZeGuitarist said:
I've never been a big fan of cases, especially on beautiful devices like this one - but you just sold me on this case. Great pics!
Click to expand...
Click to collapse
I am not a fan of cases either and will probably remove it once the phone isn't new to me anymore (in 3 months?) But I can't wait for the super thin one that the others are chatting about from Huawei. I want to ensure my phone doesn't scratch considering the metal body. Good luck.
minhtluu said:
(...)
Click to expand...
Click to collapse
OP, a question to you: do you think the case will accomodate one of those thin metal plates attached to the back plate on the inside, to use with a magnetic car mount? Like this:
The plate should be very slim, only about 0,5-1mm in thickness. Do you think this will work? Any way you could test this out for me even, by sticking something of approx. that thickness in between the back and case?
Thanks in advance!
ZeGuitarist said:
OP, a question to you: do you think the case will accomodate one of those thin metal plates attached to the back plate on the inside, to use with a magnetic car mount? Like this:
The plate should be very slim, only about 0,5-1mm in thickness. Do you think this will work? Any way you could test this out for me even, by sticking something of approx. that thickness in between the back and case?
Thanks in advance!
Click to expand...
Click to collapse
I have that same car mount. It works for me with no issues. I'm sure it will work out for you as well.
BTW...I do not notice the plate after the case is put on. The back is flat. The pictures taken have the plate inserted.
minhtluu said:
I have that same car mount. It works for me with no issues. I'm sure it will work out for you as well.
BTW...I do not notice the plate after the case is put on. The back is flat. The pictures taken have the plate inserted.
Click to expand...
Click to collapse
Haha, what a coincidence! I'm happy to hear you don't even notice the plate sitting there, and even happier to hear that the plate was actually in there in those pics, because I didn't notice it myself either
Cheers!
I'm really enjoying this case as well. I agree with all the OP'sthoughts especially about fixing the sensitive button presses. Overall very happy with the thiness, fit and soft touch. Also purchased thisNexus 6P Case, Monoy High Quality Ultra Thin Matte Black Hard case Cover for Huawei (Google) Nexus 6P 5.7" Devices (2015) (Black Hard Case) https://www.amazon.com/dp/B0168B7RIM/ref=cm_sw_r_other_awd_5XZtwbS5G6308 which is also nice. Very thin but covers most of the visor and has a textured soft touch finish. I did end up using the spigen but may switch. The other case doesn't have an issue with fingerprints.
iNiREALiZED said:
I'm really enjoying this case as well. I agree with all the OP'sthoughts especially about fixing the sensitive button presses. Overall very happy with the thiness, fit and soft touch. Also purchased thisNexus 6P Case, Monoy High Quality Ultra Thin Matte Black Hard case Cover for Huawei (Google) Nexus 6P 5.7" Devices (2015) (Black Hard Case) https://www.amazon.com/dp/B0168B7RIM/ref=cm_sw_r_other_awd_5XZtwbS5G6308 which is also nice. Very thin but covers most of the visor and has a textured soft touch finish. I did end up using the spigen but may switch. The other case doesn't have an issue with fingerprints.
Click to expand...
Click to collapse
Thanks for the info. Which one is thinner between the two?
minhtluu said:
Thanks for the info. Which one is thinner between the two?
Click to expand...
Click to collapse
Without using any tool for measurement they seem to be identical in thinness. Only notable differences between the two would be the visor cover, soft touch finish, and the spigen has a piece that separates the volume and power buttons. Either of these things can be taken as a plus or minus depending on personally preference. If you're deciding between the two the Monoy case shipped and arrived faster.
i wish there was a clear version of this
i dont think i like the idea that the entire top glass is exposed like that. seems like a good place to get scratched
indianajonze said:
i dont think i like the idea that the entire top glass is exposed like that. seems like a good place to get scratched
Click to expand...
Click to collapse
There is a tiny lip so the glass does not contact the surface if placed glass side down. I think you need a screen protector if you're worried.
A review of Note 4 cases may look a little outdated, but a device like that is and I believe will stay in the first line (well, maybe the second) for a little longer.
I just received my last case and I decided to put them all together. I usually take one case of each type to meet any scenario. Right now I own nearly all types, except a leather “dress” one and and maybe a "heavy duty".
Rock DRV case (~€16)
This one came bundled with my phone and at first I did not like it. But after a few days and until now, it became my first choice because it combines protection, style, quality with some nice features.
Its rubber is of great quality, after a year of intense use there are no marks or scratches on it. The inner side that attaches to the back of the device has a soft layer that protects the phone. All the openings are perfectly alligned and it’s very easy to put in and pull out the phone because, as you can see there is no rim in a big proportion of the lip of the case. All buttons are left uncovered and therefore easily accessible.
Its trademark is, of course its screen cover. It’s made of rubber too, but it’s semitransparent, so it’s easy to take a glance to the screen, without opening the cover. Great idea, greatly implemented.
The photo does not do justice to the functionality of the feature, it's much easier to see the screen with the cover on in a room with normal lighting.
DRV is a thick case and that shows on the camera protection bump, which is more than enough. That means that it will probably offer good protection in case of a strong impact. Luckily I have yet to drop the phone. All in all, it’s a great case that has it all. It can be a little bulky sometimes, but if somebody is used to those cases, this one is one of the best all-around with very high value for money ratio.
Nillkin frosted shield (~€6)
I’ve been buying one of those for every phone I’ve owned in the last 3 years. I also buy them for the phones of my close ones. Nillkin has made a name for themselves and they deserve it, as they offer great products at very affordable prices.
Its material is hard plastic and it’s a pain to put in/take out without hurting the phone. It does not seem to offer a great protection against strong impacts. Some people have reported that it’s very easily breakable in its corner. All those may be true, but this case has a unique feature that makes it a must have for me, its textured back. It has a very nice feel that keeps me wanting rubbing and playing with it.
Moreover, it’s thick enough to provide a fair amount of protection for the camera lens. All buttons are uncovered.
It’s cheap and of good quality. Go buy one, just to feel its texture. The only material that is more pleasant for me to touch is Oneplus One’s sandstone back, period.
Spigen Hybrid Ultra clear (~€17)
A well known company and a well known case. Its rubber is of great quality, quite thick and it gets even thicker in the corners, which is reassuring in case of a fall.
All cutouts are perfectly placed and it gives a feel of quality. Of course its thickness makes the phone bulkier, but on the other side it offers a very good grip.
It offers the best camera lens protection among all my cases. Not only because it’ thick, but because each corner is raised an additional 5mm, resulting in great sitting on a flat, even on a little bumpy, surface. The buttons are all covered and, surprisingly, they have a nice feel when pressed, despite the thick material.
No more to say, except a complaint. After a year of moderate use, it has lost its clearness and it has become a little yellowish. Strange for a product of such a high profile.
It’s not the best looking case and it does not offer too much, but it’s the only one I feel comfortable to throw from a small height with the phone in it. It’s probably the best compromise between bulk and real protection.
IMAK transparent case (~€6)
I bought one of these for my wife’s Lumia 925 about a year ago and I liked it, so recently I bought one for myself. It’s a simple back cover, but there are two features that earned my attention; First, the plastic is absolutely clear and it stays like that more for more than a year later. Second, its plastic is not very hard and it’s very easy to put on/take out, but not too flimsy either. It’s so thin, that the camera lens stays virtually unprotected.
Unfortunately, the material is a little slippery. I do not consider it that much of a protection, and it gets scratched very easily, but it does have its place among my cases. It’s perfect for a day in the office, where the possibility of a scratch is a little smaller. It can prevent all those little, small scratches that happen each day without even noticing and it keeps the contour and the looks of the device almost untouched.
Yes, the case is on!
Nillkin Nature case (~€6)
My last purchase. Nillkin has grown to a company I like, so I bought it just out of curiosity, to see what it is, it’s very cheap anyway.
It’s a full case, not just a back cover. It’s o.6 mm thick and it’s made of a very clear, soft plastic. The thing that makes it stand out of all those cheap, no-name similar cases is the attention to details. The are two embedded protective caps, one for the USB port and one for the 3.5mm jack.
All buttons are covered. The case is almost unnoticeable and leaves the camera lens rather unprotected, but it’s the thinnest full case you can buy and it’s not really slippery. Unfortunately, there is a great disadvantage for me. I use a full face tempered glass that covers the entire front face of the device. The case makes contact with the glass in a specific spot and raises the glass just enough to make typing of the “a” and the “q” just a little difficult. Other than that, it’s one incredible case that offers a great compromise between style, protection and price. It’s not “heavy duty” either, but it actually makes the phone look even nicer and gives a little protection against every day scratches.
I hope that was a little useful for any of you considering to buy a case. Thanks!
I like that last one (edit: Nillkin Nature Case). I used to use the official Samsung case (not the wallet version) and it wasn't bad, but it made the phone a bit wider and taller. I eventually just started using the phone naked and I love the way it feels and tge phone is nicer looking too. Problem is... well, it isn't protected from drops anymore. I also paint sometimes, and have gotten paint on my phone a few times from it rubbing off of my hands. Luckily, I use latex paint, so I just scrape it off with my finger nail, but still, having a case would catch any paint.
Question:
Will the Nature Case fit an ATT Note 4 N910A?
Sent from my SAMSUNG-SM-N910A using Tapatalk
spexwood said:
I like that last one (edit: Nillkin Nature Case). I used to use the official Samsung case (not the wallet version) and it wasn't bad, but it made the phone a bit wider and taller. I eventually just started using the phone naked and I love the way it feels and tge phone is nicer looking too. Problem is... well, it isn't protected from drops anymore. I also paint sometimes, and have gotten paint on my phone a few times from it rubbing off of my hands. Luckily, I use latex paint, so I just scrape it off with my finger nail, but still, having a case would catch any paint.
Question:
Will the Nature Case fit an ATT Note 4 N910A?
Sent from my SAMSUNG-SM-N910A using Tapatalk
Click to expand...
Click to collapse
Not sure, maybe you could ask the potential seller. Odds are that it fits, although I've heard about cases not fitting specific Note 4 models.
Melissakis said:
Not sure, maybe you could ask the potential seller. Odds are that it fits, although I've heard about cases not fitting specific Note 4 models.
Click to expand...
Click to collapse
One of the 4 big US carrier models has the microphone in a different place, but I'm pretty sure the ATT model follows the international design. I'll need to check though.
Sent from my SAMSUNG-SM-N910A using Tapatalk
I really like the looks of the Rock Dr V but cannot find it in the US or from a seller that will ship to the US.
Sent from my SM-N910T using XDA Free mobile app
can't go wrong with the factory Samsung case for
$9.95 on Amazon. it fits perfectly and offers great
protection !
http://www.amazon.com/gp/product/B00NP5GQWI?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nine5raptor said:
I really like the looks of the Rock Dr V but cannot find it in the US or from a seller that will ship to the US.
Sent from my SM-N910T using XDA Free mobile app
Click to expand...
Click to collapse
Yes, it's a little hard to find. I had not heard of the brand before, but their products look good.
ParishM said:
can't go wrong with the factory Samsung case for
$9.95 on Amazon. it fits perfectly and offers great
protection !
http://www.amazon.com/gp/product/B00NP5GQWI?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
Click to expand...
Click to collapse
That's what I have (in blue). Great case, but something slimmer would be better. Don't get me wrong though, the Samsung case is extremely thin, but something closer to bare n as ked is always better.
Sent from my SAMSUNG-SM-N910A using Tapatalk
any thinner or smaller will offer no drop protection !
Thanks for putting that post together! I like that Nilkin Nature case also... it looks very similar to my current "go to" case, a transparent Ringke Fusion (which also has attached port covers; I really wish more cases had this!) From your pics and the cases description, it seems like the Ringke might be slightly more protective, but it's not quite as sleek and has a bit of a boxier shape.
In your opinion, is the lip that protrudes from the sides on the front that protect the screen if face-down "high enough"? I did see what you wrote about the screen protector issue so it might be hard to say, but if the phone was dropped face-down from, say, knee height, would the center of the screen be protected from making contact?
I'm tempted to pick one up... if I end up not using it I could always cut off the port protectors and attach them to a different case
Urban Armor Gear , the only case i use gives me great protection from drops.. can be bought from
HERE
jazzmachine said:
Thanks for putting that post together! I like that Nilkin Nature case also... it looks very similar to my current "go to" case, a transparent Ringke Fusion (which also has attached port covers; I really wish more cases had this!) From your pics and the cases description, it seems like the Ringke might be slightly more protective, but it's not quite as sleek and has a bit of a boxier shape.
In your opinion, is the lip that protrudes from the sides on the front that protect the screen if face-down "high enough"? I did see what you wrote about the screen protector issue so it might be hard to say, but if the phone was dropped face-down from, say, knee height, would the center of the screen be protected from making contact?
I'm tempted to pick one up... if I end up not using it I could always cut off the port protectors and attach them to a different case
Click to expand...
Click to collapse
You're correct, I haven't mentioned anything about "face down protection". The reason for my omission is that I never do it, but now that I think of it, maybe I should, my tempered glass covers the entire face of my phone.
Anyway, the only case that I own and have a "lip" is the Spigen. All the others reach on the same level with my tempered glass. I do not consider Nillkin nature and, especially, Imak to offer any kind of protection against a very strong impact or a fall, they are too thin. On the other hand, they offer adequate protection against every day beatdown and alter the looks of the device as little as possible. I guess we can't have it all!
If I had to choose between those two, I'd choose Nillkin. Its material is softer (and perhaps more impact absorbant), it covers all the sides of the device and has the port covers.
ParishM said:
any thinner or smaller will offer no drop protection !
Click to expand...
Click to collapse
That is why I went with the Spigen Tough Armor. I know the Otterbox Defender is the better case, but it makes my Note 4 way too bulky for my taste. While the Spigen Tough Armor does bulk up my Note 4 it's doesn't do it as much as the Otterbox Defender and it still offers good protection for my phone in case I accidentally drop it.
Melissakis said:
You're correct, I haven't mentioned anything about "face down protection". The reason for my omission is that I never do it, but now that I think of it, maybe I should, my tempered glass covers the entire face of my phone.
Anyway, the only case that I own and have a "lip" is the Spigen. All the others reach on the same level with my tempered glass. I do not consider Nillkin nature and, especially, Imak to offer any kind of protection against a very strong impact or a fall, they are too thin. On the other hand, they offer adequate protection against every day beatdown and alter the looks of the device as little as possible. I guess we can't have it all!
If I had to choose between those two, I'd choose Nillkin. Its material is softer (and perhaps more impact absorbant), it covers all the sides of the device and has the port covers.
Click to expand...
Click to collapse
Thanks for the details I did a photo search for the Nilkin Nature, and it really does look like the sides are almost flush with the screen (no lip). I was surprised to see that because I have 6 or 7 cases and all of them do have enough of a lip to keep the screen from making contact when placed face-down. I always use a tempered glass protector also, but I'd prefer not to scratch or crack that, ya know, if I can help it I did recently crack the glass protector that I had on my tablet (a Sammy S2) by dropping it on my wood floor while swapping micro SDs. Definitely preferable to cracking the screen (especially with a free warranty replacement) but there's always some chance that the application of the new one will be jacked up, and no one wants that!
So in light of that discovery about the Nilkin, I'm just going to stick with my Ringke Fusion as my main case, and I'd definitely recommend it to others. I just checked Amazon to make sure it's still available, and it is for just $10. It's really pretty protective for a TPU skin (my phone's definitely survived a drop or... several onto a wood floor) and it has attached port covers!! :good: :good:
While looking at cases I also noticed that there's an updated version of the Verus Iron Shield, which IMO looks slick. I have the original and I like it, but haven't used it in a while just because I've been more into slimmer cases. The update looks really nice, but I could think of more practical ways to spend $20 since I have the older one; I think I'd be all over it if I didn't though. My number one recommendation remains the Ringke Fusion though: slim, protective, cheap, translucent, and I forget if I mentioned this already, but it does, in fact, have port covers(!!)
jazzmachine said:
So in light of that discovery about the Nilkin, I'm just going to stick with my Ringke Fusion as my main case, and I'd definitely recommend it to others. I just checked Amazon to make sure it's still available, and it is for just $10. It's really pretty protective for a TPU skin (my phone's definitely survived a drop or... several onto a wood floor) and it has attached port covers!! :good: :good:
Click to expand...
Click to collapse
The Ringke seems to be in the same tier as the Spigen I own, but it looks a little better due to the ports. Nillkin Nature is something different, it aims to offer casual protection only and keep the bulk to the bare minimum.
Which one is commended to buy?Do you buy all of these?You are so crazy~~
Brady0123 said:
Which one is commended to buy?Do you buy all of these?You are so crazy~~
Click to expand...
Click to collapse
It's not an easy question to answer, because each one serves a different purpose. The most protective is the Rock, then the Spigen. Nillkin nature is the thinnest , IMAK is a transparent back cover and Nillkin frosted shield the same.
I would really like to get the Dr. V case made by Rock. I have seen some youtube videos about it, and it looks like the near perfect case for my use.
Has anyone been able to find a place that sells it still?
I found a ali express page, but it is sold out.
http://www.aliexpress.com/store/pro...r-Samsung-Galaxy-Note/803536_32283889508.html
I've gone through all of the threads on screen protectors for the mix and I have observed that the majority aren't happy with the screen protectors they've got. I've ordered almost every type of tempered glass protector available for this device but I'm waiting for them to arrive.
For those who already have some screen protector installed on your mix, could you please upload photos of the device with the screen protector installed.
This is so that it can help other buyers to narrow down to the better screen protectors available. If you are satisfied with the screen protector you have bought, it would also help if you post a link to where you've bought it. I would have done this myself if I had received all the protectors I ordered. Unfortunately I haven't received anything yet.
Some reports suggest that Xiaomi may have used two different suppliers for the digitizer, one of them being prone to getting scratches easily. Even if this was not the case, I have seen many badly scratched Gorilla glass displays so I don't want to take the chance.
Hoping that people who already have some form of screen protection can help other buyers!
I have also bought all the decent cases available on ebay including the Love Mei Performance case and will post a review as soon as I receive them.
UPDATE: The Love Mei Powerful Case. This is the most rugged, shock-proof, snow-proof, dust-proof, splash-proof, everything under the sun-proof (except submersion in water) case available for the Mix.
As you can see from the photo comparison with another regular shock-proof case, this one is a beast. It lives up to its name. Came in a phone-box style premium box and certainly lives up to its price-tag. The case is made up of a hard aluminium shell with rubber layers for shock absorption. It also has a built-in tempered glass protector, meaning you wont need another screen protector.
The manufacturer also claims that the case offers drop-protection from up to 1.8m (5.9 feet).
I wouldn't recommend this case for daily use, mainly due to the sheer size of the case and not because it completely changes the look of the Mix. But for those of you who require extreme protection, if you have a baby at home who thinks the Mix is a Frisbee or if your dog likes playing "catch" and you only have your phone in hand, this is your answer. Buy this case!!
As you can see, I'm not using this case and may use this only if I'm going on a holiday or any outdoor activity which demands more protection for the phone. Hence, I don't regret buying it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And now, my favourite case among all the cases I have for the Mix. The 360 Shock proof Rubber case. (This case is sold under many names, the most common being 360 Shockproof. Just follow product images. Anyway there isn't any branding printed on the actual case.)
This looks like something which came straight from the phone manufacturer. Slim and feels premium. Doesn't look or feel cheap and I believe the rubber material offers decent protection from bumps. I don't know whether it can withstand drops though.
The case doesn't feel cheap like the Red Plastic rubber shock proof case I've posted earlier (See 2nd post). It also has a smaller lip above the screen compared to the Plastic case but has raised corners. Maybe the plastic case offers more protection due to the better lip surrounding the screen and also because it is rubber+plastic combo, meaning there are two materials to absorb shock compared to just rubber with this one. But the reason why this is my favourite case is because it offers a balance between looks and protection.
Hope this post has helped you decide which case to get for the Mix. All cases showcased here are available on ebay & Amazon.
Cheers!
I've received the full coverage screen protector and a case today and as promised I'm uploading photos here so that it may help you decide.
I haven't experienced any issues with touch functionality using this protector like some like some users have mentioned. But as the glass hovers over the screen due to the adhesive only around the frame, applying this screen protector makes it look as if the display has a lower contrast ratio. This is due to the gap between the actual display glass and the tempered glass protector. You lose the experience of a fully laminated display. This isn't very noticeable in a well lit room but noticeable whenever you view images or videos with dark scenes. The blacks look greyish.
Also this is a fingerprint magnet and the glass tends to attract some dust. I've tried re-applying the protector over three times and a speck of dust manages to get in under the glass every time. This isn't the first time I'm applying screen protectors and its definitely something to do with the coating on the glass which attracts dust, maybe due to static.
The case feels slightly cheap (maybe because it was cheap ) but looks like it can protect the phone well. The only gripe I have is that there is no cushioning on the back, like cases from Spigen. The rubber like material you see is more like a bumper attached to a plastic shell. The back of the phone touches the plastic shell as you see in the images. Comparable to those hard plastic cases you get. Don't know whether that helps in terms of protection but the case has a good lip around the screen as you can see.
For those wondering, I bought the red color because the other colors for this case looked too bland. The case is available in Gold, light blue, Grey and silver. I wish there was black but there isn't.
I have more cases coming in and will update this when I receive it. Till then I hope those willing to help can also upload photos of their cases and screen protectors.
Cheers!
Here's a couple pix of the PELOSI TPU/Sandstone finish case:
https://www.casefanatic.com/xiaomi/case-xiaomi-mi-mix-pelosi-quicksand-pattern-slim-matte-tpu-cover/
The cutouts for the mics/3.5mm jack/speaker grill/USB Port are precise & allow enough room for oversized headphone/USB plugs.
The volume rocker & power button are covered & are easy to identify by feel.
As for protection,it'll keep the backside free of scratches/etc,but,as for protection from drops/etc... YMMV,as this is a low profile case,adding minimal width & thickness to the overall dimensions.
It works for me,the main reason I even bother with a case for this phone is the slippery grip.
Found some new bumper case.
https://www.armorkingcase.com/blogs/news/imatch-slim-light-aluminum-metal-shockproof-bumper-case-with-kickstand-for-xiaomi-mi-mix
dancoHERO said:
Found some new bumper case.
https://www.armorkingcase.com/blogs/news/imatch-slim-light-aluminum-metal-shockproof-bumper-case-with-kickstand-for-xiaomi-mi-mix
Click to expand...
Click to collapse
Interesting bumper, but would this protect the device? I'd imagine it would just ripple the impact into the ceramic and it would probably still shatter, unless there's a good amount of padding on the inside of the frame.
I prefer the minimal amount of case / bumper on a phone. If it wasn't as slippery ide go naked, but the TPU gives you more hand confidence. Though that amorkingcase looks pretty sweet, if it was not as "sharp and shaped" looking
KOLIOSIS said:
Here's a couple pix of the PELOSI TPU/Sandstone finish case:
https://www.casefanatic.com/xiaomi/case-xiaomi-mi-mix-pelosi-quicksand-pattern-slim-matte-tpu-cover/
The cutouts for the mics/3.5mm jack/speaker grill/USB Port are precise & allow enough room for oversized headphone/USB plugs.
The volume rocker & power button are covered & are easy to identify by feel.
As for protection,it'll keep the backside free of scratches/etc,but,as for protection from drops/etc... YMMV,as this is a low profile case,adding minimal width & thickness to the overall dimensions.
It works for me,the main reason I even bother with a case for this phone is the slippery grip.
Click to expand...
Click to collapse
Where did you get this shipped to/ how long did it take? I ask because it's about half off on ebay , but will probably take a long time to get to me in the states.
LaNsLyDe said:
Where did you get this shipped to/ how long did it take? I ask because it's about half off on ebay , but will probably take a long time to get to me in the states.
Click to expand...
Click to collapse
e-Bay & yes,it took about two weeks to arrive in the U.S.
KOLIOSIS said:
e-Bay & yes,it took about two weeks to arrive in the U.S.
Click to expand...
Click to collapse
Thanks a lot just ordered
LaNsLyDe said:
Thanks a lot just ordered
Click to expand...
Click to collapse
I just looked up the shipping history on my Pelosi case:
November 25 to December 12,but, I'm guessing yours won't take as long to deliver,as mine was in transit during the peak holiday season....
Sent from my lithium using XDA Labs
KOLIOSIS said:
I just looked up the shipping history on my Pelosi case:
November 25 to December 12,but, I'm guessing yours won't take as long to deliver,as mine was in transit during the peak holiday season....
Click to expand...
Click to collapse
Thanks. Patiently waiting
What's the length/width of the love mei case? Its not shown on any site.
ChodTheWacko said:
What's the length/width of the love mei case? Its not shown on any site.
Click to expand...
Click to collapse
Its not mentioned on the box either. It adds approx. 10mm to all sides. Its a huge case as you can see from the pictures.
I went with the Pelosi and I LOVE it!
satishp said:
Its not mentioned on the box either. It adds approx. 10mm to all sides. Its a huge case as you can see from the pictures.
Click to expand...
Click to collapse
Thanks! That pretty much kills pocketability for me. Shame, but I'm not surprised.
ChodTheWacko said:
Thanks! That pretty much kills pocketability for me. Shame, but I'm not surprised.
Click to expand...
Click to collapse
It doesn't affect pocketability that much actually. It just feels like a big phone. The overall size would be similar or slightly wider than the Xperia Z Ultra. But it would still look weird with formal\office wear though if that matters.
The main issue is with daily use. You wouldn't be able to use the phone with one hand anymore.
This case is best for someone who needs serious drop\splash resistance.
There is a similar case which is smaller. Its the imatch case which looks cool in my opinion but the case is hard to find on ebay. You can get it on aliexpress or amazon though.
I liked the Gold and Black variant of this case but I doubt whether it would cause issues when using a wireless charger. Hence, I haven't bought this yet.
iMatch Metal Silicone Shockproof case
If offers a similar level of protection as the Love Mei case but it is smaller. It even has a metal kickstand.
I have to agree that the 360 Shock proof Rubber case listed by the OP is the best case so far. It feels nice and offers a decent drop protection without too much bulk. It looks like it was meant to come with the phone. The matte color looks stealthy. The protection covers all angle of the phone and even a 1 mm lip to protect screen. I have dropped it 3-4 feet onto hardwood floor and sustained no damage. The extra bumps at the corner really provides a nice cushion. I highly recommend it.
@satishp @McoupeMD
Where did you guys purchase the 360 Case?
KOLIOSIS said:
@[email protected]
Where did you guys purchase the 360 Case?
Click to expand...
Click to collapse
I bought it on ebay. They also sell it on amazon. Just takes awhile to arrive from china.
McoupeMD said:
I bought it on ebay. They also sell it on amazon. Just takes awhile to arrive from china.
Click to expand...
Click to collapse
Got it,THX!
https://www.amazon.com/dp/B01MRTEG42/ref=twister_B01N75ZUQ0?_encoding=UTF8&th=1