Database Info

vibe shot 6.0 update and root and xposed

1st way :
Pulled full OTA file for Lenovo Vibe Shot - z90a40 ROW
Installation Procedures for the official rekaveri following:
Clean, not rutirovannaya and the changed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the file update.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select English and tychem to Install update.zip
What follows is some question about the installation. Select YES
The installation process is 100% dlitelnyy.Posle installation still some time to think. Do not panic.
After installation is complete, select the restart system . The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
2nd way :
How to install TWRP rekaveri for the following:
Installed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the archive TWRP_lenovoota.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select Install and update the file with.
Make wipes are cache, dalvik-cache, data and phone.
After installation is complete, reboot the system. The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
down load files : https://cloud.mail.ru/public/36qb/qhqsDGNVr
3rd: for who have problem with 1st & 2nd
1- download thise file :http://lenovo-forums.ru/topic/19311...363_160625_row/?do=findComment&comment=497835
2- Installing the firmware using QFIL on the Lenovo device based on Qualcomm chips:
(A)
We set vcredist_x86.exe , which go in the complete set with "proshivalschikom" itself;
set himself "flasher" - QPST.2.7.422.msi ;
install drivers for the Qualcomm chips - they are in the archive Qualcomm_USB_Drivers.7z
(B)
Completely turn off your device , and then we press the volume up key (Volume Up), and holding it connect the USB-cable which is already connected to the USB 2.0 port of your PC - in the Device Manager, you should see the device Qualcomm Lenovo HS-USB QDLoader 9008
3-Just install the firmware: -
(A)
Run the program QFIL
In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn)
, for this click on Knop «the Browse» , in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then choose prog_emmc_firehose_89XX.mbn file and click "Open" . then click on digging "the Load the XML ..." , alternately choose in the window that opens - first rawprogram0.xml and click "Open", and then patch0.xml and also click "Open".
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-76252800-1419253051.png
(B)
Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
The device should restart at the successful process of filling the firmware and boot into Android OS.
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-39327800-1419253052.png
for root :::::::::
1ST : Unlock BootLoader
1. Install the software package QPST and drivers LenovoUsbDriver , QualcommUSBDrivers on your computer ( drivers are archived Service QPST programs )
2. Unpack the archive Z90a40_Android-L_unlock_7M.7z to the root of any drive.
3. Connect the device ( Z90a40 ) to a PC via USB-cable.
4. On your device, turn on debugging by the ADB .
5. Run the utility QFIL :
- in the line Select Build Type , select the Flat the Build
- in line Select Programmer press the button Browse and specify the path to the unzipped files \ Z90a40_unlock_7M \ the img \ prog_emmc_firehose_8936.mbn
- click on the button Load XML and select the first rawprogram0.xml and then patch0.xml
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-1.png.661990ee862f9d3e35653a046c561c4a.png
6. Run Reboot_QDLoader.bat::
http://lenovo-forums.ru/uploads/mon...7M_3.png.3018b3c020fc59cdab5e8b73461cc42e.png
7. In the main program window to see that the device is switched to the mode Qualcomm HS-USB QDLoader 9008 .
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-2.png.a73fc14b40f138b5a2fa71480a6df072.png
8.Start the process of firmware bootloader unlocked by pressing the button Download .
(If you have not defined QFIL utility device Qualcomm HS-USB QDLoader 9008 mode, then you should check through the Device Manager on your PC - there are no problems with Qualcomm driver)
9. At the end of the process unlocked bootloader firmware to the device you will see a sign in the window Status QFIL program the following lines:
Download Succeed
the Finish Download
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-3.png.3a5566b24283b342edc285b724004305.png
10.Turning off the device from the USB-cable and clamp button Power to turn on the device (sometimes takes up to 10-20 seconds).
11. Open the main settings menu, the device and go to the " About phone -> Device Information " and press 7 times to select " Build number " until the display shows that you have become a developer.
12. Go back to the device's main Settings menu and go to the " For Developers " in " Factory Unlock " switch the toggle switch in the ON state .
13.Turn off the device (Z90a40), we press both volume buttons and connects to a PC via a USB-cable (the device enters the mode fastboot ), then run Unlock_Bootloader.bat
You should see the value of true if the secondary Bootloader check the status in the string the Device unlocked :
(Bootloader) Device tampered: false
(Bootloader) Device unlocked: true
(Bootloader) Charger screen enabled: false
(Bootloader) Display panel: A
OKAY [0.046s]
finished. total time: 0.046s
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-4.png.49581f68c35fd8e8922eaef936037988.png
14.So all of this unlocking process is completed successfully .
files need links :
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56368
2nd: to do ( install TWRP 3.0.2.0 for Lenovo Vibe Shot )
Extract the folder TWRP archive TWRP-3.0.2.0_Z90a40_by_SevenMaxs.7z to the root of any drive
Turn off the device ( Z90a40 ), we press both volume buttons and connects to a PC via a USB-cable; the device will go into fastboot mode (on the PC must be set for the driver ADB).
Connect your phone to a PC via usb-cable, and run the Flash-TWRP.bat ( the Run-TWRP.bat for a single run TWRP.)
We are waiting for the phone to boot into TWRP
You can now disconnect the usb-cord
Installation is finished!
links : http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56391
Login or TWRP:
On the device is turned off hold down both volume buttons and the inclusion of produce, release the power button immediately once the device is turned on and the volume buttons once away; boot logo TWRP.
3rd : install su from twrp
su.zip link : https://drive.google.com/file/d/0BxQ_dY80FUzYUXN6QThDd3pSWWc/view?usp=sharing
4th: install xposed.zip ( the erorrs have been solved)
link :
soooooooooooooooooooooon
soz for error happen before
updated 23/8/2016
that's all

Everything is fine, but TWRP in Russian how to change it to English?
xposed mode is not installing
in TWRP its said that I/O error on system folder.
MOD EDIT: Please don't quote the OP

In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot

shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot
Click to expand...
Click to collapse
Root successful :good:
but I cant able to xposed framework
because in TWRP its says "cp: can't stat "/system" I/O error"
---------- Post added at 03:49 AM ---------- Previous post was at 02:51 AM ----------
cant able to install xposed framework tried everything
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app

xposed worked with me and now erorr
sorry for that but it solved try agine

since root of the rom I tried about hundred times but still xposed framework not installed ?
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app

yasirriaz1977 said:
since root of the rom I tried about hundred times but still xposed framework not installed ?
Click to expand...
Click to collapse
Try new zip

shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Click to expand...
Click to collapse
All work now

elbhrawy said:
Try new zip
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app

yasirriaz1977 said:
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Click to expand...
Click to collapse
I will upload now

elbhrawy said:
I will upload now
Click to expand...
Click to collapse
eagerly waiting for xpposed to work on my charmed device

yasirriaz1977 said:
eagerly waiting for xpposed to work on my charmed device
Click to expand...
Click to collapse
Updated

elbhrawy said:
Updated
Click to expand...
Click to collapse
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again

yasirriaz1977 said:
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again
Click to expand...
Click to collapse
its worked with me

elbhrawy said:
its worked with me
Click to expand...
Click to collapse
but its not worked for me, please do something
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app

i have problem with update
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance

il_milanese said:
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance
Click to expand...
Click to collapse
use qfil better

I have the bootloader unlock and TWRP installed,
the TWRP recovery let me know that i have no SO installed.
how can I install/flash a rom without brick the phone with this recovery installed?
Things to mustnt do with TWRP installed?
i've been 2 days without phone(bricked). I need help
Thank you

a bit confussing cause the english not too good, look like translated from other language.
can somebody fix it?
so can i have root with marsmallow?

Thank U.
OTA update v363 Ok. Thank U.

[Recovery][TWRP 2.8.2.0] Life Wireless X325 Model "Wind II"

Warning: this device
(Build: LW_X325_APR_2017_V2748_01_FINAL
Build fingerprint: 'alps/Z22/Z22:4.4.2/KOT49H/1492164051:user/test-keys')
contains the com.adups.fota and com.data.acquisition malware. Use at your own risk!
Credit: All credit goes to:
yuweng for Easy Magic TWRP Installer for all MediaTek Devices
out386 for [MTK] Rooting a device (kind of) manually
koush for Universal ADB drivers
Chainfire for adbd Insecure
bovirus and rua1 for MTK Droid Root & Tools
Hovatek for [Tutorial] How to manually install MT65xx (MediaTek) USB VCOM drivers on Windows
Alternate download links:
https://mega.nz/#!UAl2HYoR!jUgMi_YkrrQ3CBhjMSCRcZat1QGEhbnOiJ6XjQV8yEw
OR
http://www.mediafire.com/file/a2eqra3fpzxpy88/recovery.img
Pre-setup:
You will need:
Universal ADB drivers
MTK Droid Root & Tools
SP Flash Tool
MediaTek PreLoader USB VCOM: I used this method from Hovatek which works on Windows 7 x64 but I can't vouch for other OS/architectures
Setup Instructions:
1. Install the Universal ADB drivers.
2. With your phone turned on, connect your phone via USB. USB debugging must be enabled and the phone must be connected as Camera (PTP) for any tools to access it.
3. Use MTK Droid Root & Tools to generate a scatter file.
4. Disconnect the USB cable. Turn your phone off and remove the battery. Reconnect the USB cable, keeping the phone turned off.
5. Open SP Flash Tool. Optional but highly recommended: use the Readback tab to backup your current ROM. Root is NOT required for readback backup. Load the scatter file generated in step 3. The download agent should be MTK_AllInOne_DA.bin by default, select it if it isn't.
6. Browse and select the recovery.img if it isn't already. Make sure that ONLY the checkbox to the left of RECOVERY is checked! The dropdown menu should be set to "Download Only", select it if it isn't. Click Download and wait for a green check mark to appear. Now it's safe to disconnect the USB, put the battery back in, start the phone, and reconnect the USB.
7. The fastest way to get to recovery is to boot normally, then open adb and type and enter adb reboot recovery to reboot directly into recovery. Holding volume up + power from the off state works too. Volume down + power enters factory test mode which isn't very interesting.
Notes:
The bootloader is unlocked. It appears that there's no easy way for a non-root user to tell that though, fastboot oem commands will silently hang indefinitely, fastboot getvar all only returns partition names and sizes, stock recovery doesn't show lock status...
All images must be flashed. fastboot boot will silently hang on 'booting...' indefinitely.
fastboot flash can be used to flash boot.img but not recovery.img, some sort of permissions issue
End:
Let me know if I forgot something.

This post appears to be intended to refer to SMT TELECOMM HK LIMITED X325 devices that use Life Wireless (mobile virtual operator) branding (There is also a Social Mobile Telecommunications branded version of X325).
The title refers to the device as "BPX325", but BPX325 is the model code of the battery, not the device.
Thanks for the recovery. It would also be good to state what version of TWRP the recovery is based on.

Ascii3 said:
This post appears to be intended to refer to SMT TELECOMM HK LIMITED X325 devices that use Life Wireless (mobile virtual operator) branding (There is also a Social Mobile Telecommunications branded version of X325).
The title refers to the device as "BPX325", but BPX325 is the model code of the battery, not the device.
Thanks for the recovery. It would also be good to state what version of TWRP the recovery is based on.
Click to expand...
Click to collapse
Oops, fixed. This uses TWRP 2.8.2.0. I only know for sure that it works on my device, maybe this will help determine compatibility?
[ro.mediatek.chip_ver]: [S01]
[ro.mediatek.platform]: [MT6572]
[ro.mediatek.version.branch]: [KK1.MP7]
[ro.mediatek.version.release]: [ALPS.KK1.MP7.V1]
I'm not sure. I'm no Android developer, I learned all this the hard (trial and error) way after finding adups.fota in the system partition and not trusting rooting apps to do the job for me.

Teclast T30 T1P2 Root

Actual Firmware https://onedrive.live.com/?authkey=!APMSxpd_UoEEQBY&id=A120532B51026BDA!1816&cid=A120532B51026BDA
Unlock Bootloader https://rootwrp.com/unlock-teclast-t20-bootloader/
and flash with
fatboot flash boot +file
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

This is for the new teclast t30 tablet? can you make a video?

Yes Brand New
https://www.youtube.com/watch?v=G4uuLCjBWrs&feature=youtu.be
Video is About Patch/flashing Bootimage with Magisk Manager(Tablet is already rooted)

hello
successfully root new T30 with patched boot.img (with magisk).
I have unlocked bootloader with "fastboot flashing unlock" but now, have a message on boot screen and have to wait 5s more for boot
is there any way to bypass this message and 5s pause ?
there is a TWRP 3.3.1 on 4pda by nemo-nemo and helpers, but touchscreen don't work for me

Unlocked Bootloader cause this warning on Boot(Power Button should override the 5 secs Pause)
Dont using the recovery i dont know

Here is TWRP 3.3.1 for T1P2 (T30):
https://drive.google.com/file/d/1RW5ek_FIAMe_8KvRWpNE_l7wi8qNxmUS/view?usp=sharing
Thx to nemo-nemo on 4pda.ru

Hello,
I can confirm TWRP work fine but you have to use a USB-OTG mouse
The 1st time you boot on TWRP, you have a encryption code request, choose "cancel"
To disable force encryption, flash "DisableForceEncryption_treble" zip with TWRP
When you unlock bootloader of this T30, you have warning message and 5s wait to boot
There is a tweak to bypass this:
download script "orange_state_disabler" zip and flash it with TWRP
this script is fully safe, there is a compatibility test and don't flash if it can't.
Thx to XopmoH97 from 4pda.ru
Download from here: https://drive.google.com/drive/folders/1tSInU_vOFZAfpdbc1bETAuIJsniQqjUd?usp=sharing

edit*

TechGuru123 said:
there is a newer firmware for this tablet
T30(T1P1)_Android 9.0_V1.04_E43D.rar
https://pan.baidu.com/s/1sjEt1jxEOz...arentPath=/sharelink491465238-972273915700760
password
1f9r
Click to expand...
Click to collapse
What's your source ?
Have you verify this firmware ?
T30 is T1P2, not T1P1.
Look at your ID on tablet's backside: T1P2
Go to Teclast website firmware and search for
T1P1: unknown
T1P2 -> T30
Verify and test before publish, please

edit*

My PC can't find any T30 fastboot devices... which drivers use ??

Search for "MTK_USB_All_v1.0.8" on google

Is there no way to root without unlocking the bootloader first?

kestrelv2 said:
Is there no way to root without unlocking the bootloader first?
Click to expand...
Click to collapse
Unlocking bootloader is useless for 90% of users
Why ?:
- Only for fastboot commands
- Unlocking bootloader avoid warranty
You can do lot of things without unlock:
- Install TWRP (with Upgradetool)
- Install custom system, logo, boot, etc ... with upgradetool
and
You can root without unlock:
- Download firmware (T1P2) from teclast website and unpack in PC folder, ex: "T30_firm".
- Download and install "MTK_USB_All_v1.0.8" for MTK drivers (search on google)
- Connect your T30 to PC with usb
- In "T30_firm/firmware" folder, copy "boot-verified.img" to you T30
- Install magisk manager on your T30 an launch it
- Choose install magisk by "patch a file", choose your "boot-verified.img" and wait
- Now, you have a "magisk-patched.img" file in download folder
- Copy "magisk-patched.img" on your "T30_firm" folder PC
- Launch "Upgrade tools.exe" in "T30_firm/upgrade tool" folder
- Unselect all "img" files
- Select only "boot" line and choose your "magisk-patched.img" (click on same line, "location" column)
- Shutdown your T30 (allways connected to pc)
- Clic on "download" in upgrade tool and wait for big popup with green "V"
You can disconnect you T30 and boot.
Open magisk manager, "tada !" magisk is ready

murigny64 said:
Unlocking bootloader is useless for 90% of users
Why ?:
- Only for fastboot commands
- Unlocking bootloader avoid warranty
You can do lot of things without unlock:
- Install TWRP (with Upgradetool)
- Install custom system, logo, boot, etc ... with upgradetool
and
You can root without unlock:
- Download firmware (T1P2) from teclast website and unpack in PC folder, ex: "T30_firm".
- Download and install "MTK_USB_All_v1.0.8" for MTK drivers (search on google)
- Connect your T30 to PC with usb
- In "T30_firm/firmware" folder, copy "boot-verified.img" to you T30
- Install magisk manager on your T30 an launch it
- Choose install magisk by "patch a file", choose your "boot-verified.img" and wait
- Now, you have a "magisk-patched.img" file in download folder
- Copy "magisk-patched.img" on your "T30_firm" folder PC
- Launch "Upgrade tools.exe" in "T30_firm/upgrade tool" folder
- Unselect all "img" files
- Select only "boot" line and choose your "magisk-patched.img" (click on same line, "location" column)
- Shutdown your T30 (allways connected to pc)
- Clic on "download" in upgrade tool and wait for big popup with green "V"
You can disconnect you T30 and boot.
Open magisk manager, "tada !" magisk is ready
Click to expand...
Click to collapse
Ill give it a try thanks.
It worked, thanks a bunch!!!

When I turn off the T30 and press download, nothing happens anymore. I tried it on both Windows 7 and Windows 10. Just nothing. I'm waiting 10 minutes, then I'll put a stop and i'm done. No change. Does the tablet really have to turn off? Otherwise it's very well described, I think I'm making a mistake somewhere, I just don't know where.
Zuzzana

Try press "download" first and then, power off

zuzzana said:
When I turn off the T30 and press download, nothing happens anymore. I tried it on both Windows 7 and Windows 10. Just nothing. I'm waiting 10 minutes, then I'll put a stop and i'm done. No change. Does the tablet really have to turn off? Otherwise it's very well described, I think I'm making a mistake somewhere, I just don't know where.
Zuzzana
Click to expand...
Click to collapse
For me these mtk tools only do anything when i plug into a certain usb port. I couldnt find one that worked on my desktop pc but on my laptop its the usb 2.0 slot that worked and not either of the usb 3 slots. Turn it off click download and then plug in the tablet and it should start assuming you have properly installed the needed drivers.

Thank you, thank you, thank you. It just wanted to press download first and then plug it into USB. Thanks again.
Zuzzana

WARNING !!
Don't flash chinese firmware mentioned above by @TechGuru123
This firmware erase all your partitions,your NVRAM and IMEI
You will lose IMEI and it's hard to recover !

How to unbrick constantly vibrating Nokia 3 (TA-1032)

I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool (5.x).
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy

Hi,
Thank you for uploading this, I have problems too with my Nokia 3 TA-1032. It's different case than yours, but still I can't turn it on. Can you please write down, how exactly I supposed to run your script in Python3? I have difficulties to extract files. Thank you very much forwardly

JustAGuyWithAndroidPhone said:
Hi,
Thank you for uploading this, I have problems too with my Nokia 3 TA-1032. It's different case than yours, but still I can't turn it on. Can you please write down, how exactly I supposed to run your script in Python3? I have difficulties to extract files. Thank you very much forwardly
Click to expand...
Click to collapse
I'm assuming you are using Windows.
First, download Python 3 from here, then open the downloaded file to install Python.
While installing, if you see a checkbox that say "Add to PATH", check it. Then proceed to complete your installation.
After installing, download the "nb0 unpack script" to the same folder/directory as the firmware file (.nb0).
In that folder/directory, hold Shift and right-click on the file explorer, then click "Open powershell window here" or "Open command window here" (example).
Then type this into the command window (if you have changed the files' name, you also have to change them in the command)
Code:
python nb0-unpack.py NE1-215H-0-00WW-B02.nb0

huupoke12 said:
I'm assuming you are using Windows.
First, download Python 3 from here, then open the downloaded file to install Python.
While installing, if you see a checkbox that say "Add to PATH", check it. Then proceed to complete your installation.
After installing, download the "nb0 unpack script" to the same folder/directory as the firmware file (.nb0).
In that folder/directory, hold Shift and right-click on the file explorer, then click "Open powershell window here" or "Open command window here" (example).
Then type this into the command window (if you have changed the files' name, you also have to change them in the command)
Code:
python nb0-unpack.py NE1-215H-0-00WW-B02.nb0
Click to expand...
Click to collapse
Thank you very much for your advice, the unpacking worked, but the flash not somehow. Here is a picture about what Error code I get.

JustAGuyWithAndroidPhone said:
Thank you very much for your advice, the unpacking worked, but the flash not somehow. Here is a picture about what Error code I get.
Click to expand...
Click to collapse
You didn't select the "Download-Agent" as the Download Agent file from the link on my post. You are using the default Download Agent file of SP Flash Tool. You may also want to download the latest version of SP Flash Tool.

huupoke12 said:
You didn't select the "Download-Agent" as the Download Agent file from the link on my post. You are using the default Download Agent file of SP Flash Tool. You may also want to download the latest version of SP Flash Tool.
Click to expand...
Click to collapse
Yes, you right, because the SP tool don't accept that. Here is a pic about that:
I downloaded the latest SP tool from the link above here in your post.

JustAGuyWithAndroidPhone said:
Yes, you right, because the SP tool don't accept that. Here is a pic about that:
I downloaded the latest SP tool from the link above here in your post.
Click to expand...
Click to collapse
Can you try placing the files to a "legacy-compatible" directory (no spaces, only ASCII characters (like a password)). For example, try placing the files (download agent, firmware, SP Flash Tool) in "C:\phone\nokia3\".

Yes, I relocated as you writed down, and now the download agent is accepted (that one which you linked here above), in an earlier version from the Flashtool, not the latest one. Flashing still need authorization file somehow. ( I tried to flash a rom with Authorization file needed, probably that going to be the reason. Originally I wanted to downgrade my Nokia 3 TA-1032)

huupoke12 said:
Can you try placing the files to a "legacy-compatible" directory (no spaces, only ASCII characters (like a password)). For example, try placing the files (download agent, firmware, SP Flash Tool) in "C:\phone\nokia3\"
Click to expand...
Click to collapse
Yes, I relocated as you writed down, and now the download agent is accepted (that one which you linked here above), in an earlier version from the Flashtool, not the latest one. Flashing still need authorization file somehow. ( I tried to flash a rom with Authorization file needed, probably that going to be the reason. Originally I wanted to downgrade my Nokia 3 TA-1032)

huupoke12 said:
Can you try placing the files to a "legacy-compatible" directory (no spaces, only ASCII characters (like a password)). For example, try placing the files (download agent, firmware, SP Flash Tool) in "C:\phone\nokia3\".
Click to expand...
Click to collapse
I have mistakenly deleted the os of my Nokia 3. PLEASE HELP!!!
The SP Flash tool is still not accepting the download agent!
PLEASE HELP!

Nokia3root said:
I have mistakenly deleted the os of my Nokia 3. PLEASE HELP!!!
The SP Flash tool is still not accepting the download agent!
PLEASE HELP!
Click to expand...
Click to collapse
If you have done the steps exactly as in my instruction and it still fail, then I can't help you anymore. Your phone may be in a different state than mine.
I have successfully unbricked my Nokia 3 (in a constantly restart cycle) on Arch Linux (I don't use Windows). If you want to give it a try, and if you are used to Windows User Interface, I recommend Linux Mint Cinnamon (Ubuntu is another popular choice, but its User Interface is very different from Windows, and Arch Linux is not easy to install if you are not used to command line interface and have some Linux knowledge).

huupoke12 said:
If you have done the steps exactly as in my instruction and it still fail, then I can't help you anymore. Your phone may be in a different state than mine.
I have successfully unbricked my Nokia 3 (in a constantly restart cycle) on Arch Linux (I don't use Windows). If you want to give it a try, and if you are used to Windows User Interface, I recommend Linux Mint Cinnamon (Ubuntu is another popular choice, but its User Interface is very different from Windows, and Arch Linux is not easy to install if you are not used to command line interface and have some Linux knowledge).
Click to expand...
Click to collapse
ok, i will try

huupoke12 said:
I'm assuming you are using Windows.
First, download Python 3 from here, then open the downloaded file to install Python.
While installing, if you see a checkbox that say "Add to PATH", check it. Then proceed to complete your installation.
After installing, download the "nb0 unpack script" to the same folder/directory as the firmware file (.nb0).
In that folder/directory, hold Shift and right-click on the file explorer, then click "Open powershell window here" or "Open command window here" (example).
Then type this into the command window (if you have changed the files' name, you also have to change them in the command)
Code:
python nb0-unpack.py NE1-215H-0-00WW-B02.nb0
Click to expand...
Click to collapse
I am unable to extract the files! PLEASE HELP!!!

huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install `python3` if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
THANK YOU VERY MUCH, BROTHER!!!!!!!!!!!!!
It worked!!
Now just have my story..... Actually, this was my friend's Nokia 3 which he gave me to root and I convinced him that I would root it and convinced him that there was no risk in it. Then I rooted the device for him very hardly but then I mistakenly deleted the os of the phone and then I searched the whole internet and found your post.... First of all, I got many errors while unpacking the nb0 file as I was using python 3.0, so I downloaded the python 3.8 installer but it wouldn't install because it was saying that that Service pack 1 was not installed in my Windows 7 but it was, hence I got very irritated and observed the log file and downloaded an update (KB3033929). Then I installed python 3.8 and thus I come to have a working mobile! I again rooted it and gave it to my friend and told him about these happenings.
Once again thank you very much!!! You saved my respect!!

Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. how can download scripte ?

majd11 said:
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. how can download scripte ?
Click to expand...
Click to collapse
Right-click on the "Raw" button at the top-right corner, and select "Save link as".

huupoke12 said:
Right-click on the "Raw" button at the top-right corner, and select "Save link as".
Click to expand...
Click to collapse
Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
please help me how do that ?? run the script with .nb0 can you make the vedio please

majd11 said:
Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
please help me how do that ?? run the script with .nb0 can you make the vedio please
Click to expand...
Click to collapse
Read #3 and #13
(#13 is correct, he just downloaded a wrong python version)

huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
my nokia phone is Ta-1032 mtk 6737 and the firmware in the link is mtk 6735 can I use this on my phone MTK 6737??

huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
please can i use this on my nokia 3 mtk 6737 ?

Question [Guide] How to use SP Flash tool [Windows Only!]

Today I'm going to write how to use so flash tool for OnePlus Nord CE 2
Before you begin download: https://drive.google.com/file/d/1fL8qqu_pBK1YU5xbgugLax7ZKU-k3ex7/view?usp=drivesdk
This includes sp flash tool for our MTK version, drivers and MTK Bypass files!
Requirements: PC or Laptop
Internet connection
USB cable
Take a backup of your data, Just in case if any error happens.
Windows Method
Requirements:
SP_Flash_Tool_5.2112.00.zip
drive.google.com
Decrypted OFP for our device! You can find it on Google!
Install Python from Windows Store
https://sourceforge.net/projects/li...ibusb-win32-devel-filter-1.2.6.0.exe/download
libusb-win32 - Having Issues? Click Here
Steps:
1) Extract the zip
2) Use the bundled QcomMtk_Driver_Setup_3.1.9.exe from the zip. for MTK Preloader USB VCOM driver it should be installed within windows 8 and above?
3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.
Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.
Choose MediaTek USB Port and install it.
4)Then run the brom.bat under Bypass folder (spflashtool/mtk-bypass/bypass). (for Linux, When available) use command: python3 mtk payload to start the BROM exploit!
5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
6)After the above step Go into Flash Tool folder and open the SPFlash tool and launch flash_tool.exe
7) Click on Options>Options and go to Connections and select UART and set Baud Rate to 921600
8)Now in Sp flash tool select the scatter file which you have extracted from Partitions.zip and make sure that prealoder, lk, and lk2 is selected.
9) You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
10) Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone
After flashing it should look like this. Download has been complete.
Credits:
B. Kerler for MTK Bypass
@Saksham Antil (aka Tony Stark) for original guide

Reserved for updates:
When Linux Version will be available for our devices it will be posted
Edit it looks like it is, only my who uses old source