Database Info

[Completed] asus K01A update loop

Hello I need help
Info: Asus Tablet Model: K01A
[/INDENT][/INDENT]BOT Version: WW_MeMO_Pad_11.2.3.33-20150302
IFWI VERSION 64.25
Problem: Launch system update from OS but update will not complete. Android icon falls over "Error". This will continue until all power is exhausted.
What I did that may have caused this?
I attempted to root device several times. However, I was never able to disable the bootloader and never gained full root access using KING ROOT, Root.bat, etc. So, I gave up and followed the instructions to update the OS to try another method. Since, doing this, the tablet continues this behavior.
What functions are available?
I can get into Fastboot and execute fastboot commands. When I select Recovery mode the tablet attempts to apply the update, again.
What do I need?
Instructions on how to stop/delete the update when in fastboot mode. Or any other ideas. I have searched for this command and found nothing. I downloaded ASUS.Flash.Tool.v1.0.0.24-ATD-20160106, UL-K01A-TW-10.32.1.33.3-user.zip, minimal_adb_fastboot_v1.4.2_setup. Asus Flashtool recognizes tablet but have been unsuccessful flashing, Error fastboot reboot to recovery failure(FAILED( remote: unknown OEM command)"
Thank for any help.

Hi !
I suspect that the failure is related to the newer firmware you were trying to flash so try an older one
Some hint here https://forum.xda-developers.com/memo-pad-7/general/me176c-x-collection-roms-updates-t3012965
More help here Asus MeMO Pad 7 > MeMO Pad 7 Q&A, Help & Troubleshooting
Good luck !

Question Pogo Keyboard sends device into Recovery Mode

When connecting the official Lenovo Keyboard cover the device reboots and eventually lands in recovery mode. It's seemed to have started since the latest update, I've tried a factory reset and attempted to roll back the device however ended up in a Fastboot boot loop that I fixed with the Lenovo rescue assistant.
The keyboard has worked for over a month before this, does anyone have any ideas on how to solve this?
My device is the XiaoXin Pad Pro with the latest ROW ROM.

This is the 2020 model, TB-J706F
TB-J706F_RF01_210601 Software

I have the same setup. Booted P11 and then attached keyboard - No problems.
Powered down the P11 then attached keyboard and booted up - No problems.
At about the time you got the last update had you also installed some new app(s)? Might be one of them causing a problem.

flhthemi said:
I have the same setup. Booted P11 and then attached keyboard - No problems.
Powered down the P11 then attached keyboard and booted up - No problems.
At about the time you got the last update had you also installed some new app(s)? Might be one of them causing a problem.
Click to expand...
Click to collapse
Not that I can remember, since this post I've found a couple Lenovo forum posts with people with the same problem. Apparently the update sometimes corrupts a keyboard parameter file, hope it gets fixed in the next update.

I experienced the same problem after updating to TB-J706F_S243005_210601_ROW (using the 11.5" XiaoXin Pad Pro/P11 Pro with the SDM730). If you can't wait for a system update to fix the issue, it is possible to flash the old ROM.
In short, the steps would be:
Fash TB-J706F_CN_WIFI_USER_Q00018.0_Q_ZUI_12.0.335_ST_201103_qpst
Flash TB-J706F_S242001_210430_ROW
Turn off automatic updates before connecting to WiFi
You will loose your data on the tablet so have backups. I had success using Qualcomm Flash Image Loader (QFIL) and am happy to provide more information if it would help.

Impossible to fix boot loop infinix hot 10 play

-flash the wrong twrp in recovery
-phone boot loop
-every 5 seconds phone will restart
-cant turn it off except waiting it to drained its battery or unplug the battery from the inside(don't have tools can't do it)
-cant go to bootloader
-BUT it kinda respond to power + up it made the logo blinked instead of vibrating and reboot if keep doing that the logo is just gonna blink
-can the orange state be remove?
-wont respond to any input other than "power + up"
-tried flashing but CANCEL CUZ IT REBOOT
-for me it's theoretically impossible is there a way to force it into bootloader without doing inputs cuz I can flash rom during it's black screen phase

use sp flash tool and flash stock boot.img

is there a website where we can find stock roms? I bricked my phone trying to install the wrong twrp for infinix hot 11s nfc. Thanks.

Does somebody have the stock rom for Infinix Hot 10 Play X688B?
There is the builder number X688B-H659ABCEFGHI-Q-GL-220109V524

django123321 said:
is there a website where we can find stock roms? I bricked my phone trying to install the wrong twrp for infinix hot 11s nfc. Thanks.
Click to expand...
Click to collapse
Download Infinix Stock ROM for all models (Latest Firmware)
Download the latest Infinix Stock ROM Firmware (Flash File) for all the available Infinix smartphones, feature phones, and tablets.
androidmtk.com
Also posted this link to another thread. Not sure about the legitimacy, but this is the only site I could find with XOS roms. Some xda forums has some stock images but they are way older.

I got working solution same as you. If you still can't fix it. Let me know i have the solution.

boomzkik said:
I got working solution same as you. If you still can't fix it. Let me know i have the solution.
Click to expand...
Click to collapse
Hey could you send it to me? I’m having this problem too

Hammy69 said:
Hey could you send it to me? I’m having this problem too
Click to expand...
Click to collapse
Hi follow this steps.
1st - go here and setup this one https://github.com/MTK-bypass/bypass_utility and download also the exploits_collection
2nd - after installing those tools I mention, power off the android device
3rd - run the main.py python on cmd
4th connect your android device on your laptop and wait for it to bypass the mtk
5th - download the official firmware of infinix hot 10 compatible with your device
6th - download spflash tool and flash it and voila your phone will be alive again
let me know if you still have question or if you can't reproduce it.

boomzkik said:
Hi follow this steps.
1st - go here and setup this one https://github.com/MTK-bypass/bypass_utility and download also the exploits_collection
2nd - after installing those tools I mention, power off the android device
3rd - run the main.py python on cmd
4th connect your android device on your laptop and wait for it to bypass the mtk
5th - download the official firmware of infinix hot 10 compatible with your device
6th - download spflash tool and flash it and voila your phone will be alive again
let me know if you still have question or if you can't reproduce it.
Click to expand...
Click to collapse
Hey i did all the steps but i get this problem. I uninstalled and reinstalled UsbDk but it still doesn't work.
Code:
[2022-04-10 01:49:37.392714] Waiting for device
[2022-04-10 01:49:37.393861] Found device = 0e8d:2000
Traceback (most recent call last):
File "C:\Users\eaman\src\device.py", line 84, in find
self.configuration = self.udev.get_active_configuration()
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 921, in get_active_configuration
return self._ctx.get_active_configuration(self)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 113, in wrapper
return f(self, *args, **kwargs)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 249, in get_active_configuration
self.managed_open()
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 113, in wrapper
return f(self, *args, **kwargs)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 131, in managed_open
self.handle = self.backend.open_device(self.dev)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\backend\libusb1.py", line 804, in open_device
return _DeviceHandle(dev)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\backend\libusb1.py", line 652, in __init__
_check(_lib.libusb_open(self.devid, byref(self.handle)))
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\backend\libusb1.py", line 604, in _check
raise USBError(_strerror(ret), ret, _libusb_errno[ret])
usb.core.USBError: [Errno None] Other error

boomzkik said:
Hi follow this steps.
1st - go here and setup this one https://github.com/MTK-bypass/bypass_utility and download also the exploits_collection
2nd - after installing those tools I mention, power off the android device
3rd - run the main.py python on cmd
4th connect your android device on your laptop and wait for it to bypass the mtk
5th - download the official firmware of infinix hot 10 compatible with your device
6th - download spflash tool and flash it and voila your phone will be alive again
let me know if you still have question or if you can't reproduce it.
Click to expand...
Click to collapse
Hey man! I was having the same issue with my Infinix Hot 10s x689B since yesterday. I tried to flash orange fox custom recovery and now my phone is constantly getting restarted to the infinix title screen in a loop. I followed ur instructions to the 4th point. Now my phone has stopped the "boot loop" thing. What to do now? How can I flash the official firmware? If I try to boot the device again, the loop resumes. Can you please help me?

Question Lenovo P11 pro Bootloop Stuck

Hello everybody,
I have a bootloop issue with a Lenovo P11 Pro. It is stuck in a bootloop and keeps restarting 1 min after Lenovo logo.
I have tried anything from Hard Reset to Rescue Smart Assistant Flashing and Qfil Flashing. It flashes successful but Tablet still doesn't want to boot up.
Have any ideas? I bought it like that so don't know what the person before me did to it.
Tablet seems to charge.
Thanks in advance for all the ideas!

emybuse said:
Hello everybody,
I have a bootloop issue with a Lenovo P11 Pro. It is stuck in a bootloop and keeps restarting 1 min after Lenovo logo.
I have tried anything from Hard Reset to Rescue Smart Assistant Flashing and Qfil Flashing. It flashes successful but Tablet still doesn't want to boot up.
Have any ideas? I bought it like that so don't know what the person before me did to it.
Tablet seems to charge.
Thanks in advance for all the ideas!
Click to expand...
Click to collapse
I haven't had this situation, but what firmware have you tried flashing? Have you read the threads about the region codes, and how the firmware has to match them (in the latest firmwares) or the region code has to be changed. I would try flashing an international firmware, and if that doesn't work try a china firmware. There are only two regions I think, so one of those should work.
I could have got the wrong end of the stick with this as I've not been in this situation, so not very carefully read those threads yet, so just a suggestion!

mdurkin said:
I haven't had this situation, but what firmware have you tried flashing? Have you read the threads about the region codes, and how the firmware has to match them (in the latest firmwares) or the region code has to be changed. I would try flashing an international firmware, and if that doesn't work try a china firmware. There are only two regions I think, so one of those should work.
I could have got the wrong end of the stick with this as I've not been in this situation, so not very carefully read those threads yet, so just a suggestion!
Click to expand...
Click to collapse
Rescue and Smart Asistant does the job automaticaly and it flashed TB-J706L_S620103_211124_ROW. And with Qfil I tried the TB-J706L_S243005_210601_ROW.

emybuse said:
Rescue and Smart Asistant does the job automaticaly and it flashed TB-J706L_S620103_211124_ROW. And with Qfil I tried the TB-J706L_S243005_210601_ROW.
Click to expand...
Click to collapse
RSA did not succeed in my case.
$ fastboot set_active a did the trick for me!

Amatöhr said:
RSA did not succeed in my case.
$ fastboot set_active a did the trick for me!
Click to expand...
Click to collapse
Fail : not unlock, help me

I didn't think I had to, when I plug in the tablet it pops up with the name and everything.

Hi, I have the same issue with a Tab 11 pro gen 2. Could you let me know how to solve it? I can't even find the recovery, and tried all button combinations. I can only go to fastboot or meta modes.

im literally stuck on this ( fastboot ) screen... it boots straight to this screen. If i plug the device into my pc it says device not recognised and none of the drivers seem to work. I have tried everything to shut it down so i can try flash via EDL, but the power button just takes me back to fastboot again...

I'm having the same reboot issue 1 minute or less after fully booting. I have no idea how to fix it

Question HARD BRICKED MY XIAOXIN PAD PRO 2021 while reflash, can it be saved?

HI guys,
Im at my wit's end. Really hated the Global ROM so decided to reflash to CN ROM. QFIL mentioned that it was a success but unfortunately the device bricked. Simply won't turn on. I tried everything online, so I turn to you guys.
Am i screwed?

I also met the same case. Need help. Thank you guys

I’m not familiar with Xiaonin. I know some android devices have “safe boot” and you can reset it from there. Maybe they have it, maybe not.

Try to enter recovery mode and do full factory reset from there

i can't get into recovery mode can only enter fastboot mode

Travel_Mate said:
Try to enter recovery mode and do full factory reset from there
Click to expand...
Click to collapse
i can't get into recovery mode can only enter fastboot mode

this helped me with same problem
Unlock Bootloader without proper unlock file - Xiaoxin Pad Pro 2021 [TB-J716F]
Hello fellow friend, "Corrupted device" NO LONGER This guide is targetted at those who like me, locked their bootloader and got the message : "corrupted device blabla" And are desperate as Lenovo doesn't answer when we ask for the unlock file...
forum.xda-developers.com