When connecting the official Lenovo Keyboard cover the device reboots and eventually lands in recovery mode. It's seemed to have started since the latest update, I've tried a factory reset and attempted to roll back the device however ended up in a Fastboot boot loop that I fixed with the Lenovo rescue assistant.
The keyboard has worked for over a month before this, does anyone have any ideas on how to solve this?
My device is the XiaoXin Pad Pro with the latest ROW ROM.
This is the 2020 model, TB-J706F
TB-J706F_RF01_210601 Software
I have the same setup. Booted P11 and then attached keyboard - No problems.
Powered down the P11 then attached keyboard and booted up - No problems.
At about the time you got the last update had you also installed some new app(s)? Might be one of them causing a problem.
flhthemi said:
I have the same setup. Booted P11 and then attached keyboard - No problems.
Powered down the P11 then attached keyboard and booted up - No problems.
At about the time you got the last update had you also installed some new app(s)? Might be one of them causing a problem.
Click to expand...
Click to collapse
Not that I can remember, since this post I've found a couple Lenovo forum posts with people with the same problem. Apparently the update sometimes corrupts a keyboard parameter file, hope it gets fixed in the next update.
I experienced the same problem after updating to TB-J706F_S243005_210601_ROW (using the 11.5" XiaoXin Pad Pro/P11 Pro with the SDM730). If you can't wait for a system update to fix the issue, it is possible to flash the old ROM.
In short, the steps would be:
Fash TB-J706F_CN_WIFI_USER_Q00018.0_Q_ZUI_12.0.335_ST_201103_qpst
Flash TB-J706F_S242001_210430_ROW
Turn off automatic updates before connecting to WiFi
You will loose your data on the tablet so have backups. I had success using Qualcomm Flash Image Loader (QFIL) and am happy to provide more information if it would help.
Related
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone
Well.
Few days ago I recived the notification for the OTA update of the tablet. I have CWM Recovery (and the device rooted, of course) and i tried to apply the OTA normaly. When the device restarts to do the update, it gets stucked in the recover.
I tried to do a factory reset, but it dosen't work (stills getting stucked at any restart). I also tried to download the OTA files into my PC and apply them throught "adb sideload", but I only have found the files for G Pad 8 /8.3.
Someone have any idea?
Thanks for all!
XDA Visitor said:
Well.
Few days ago I recived the notification for the OTA update of the tablet. I have CWM Recovery (and the device rooted, of course) and i tried to apply the OTA normaly. When the device restarts to do the update, it gets stucked in the recover.
I tried to do a factory reset, but it dosen't work (stills getting stucked at any restart). I also tried to download the OTA files into my PC and apply them throught "adb sideload", but I only have found the files for G Pad 8 /8.3.
Someone have any idea?
Thanks for all!
Click to expand...
Click to collapse
Hello and welcome to XDA! I suggest you register and post your question in the following thread, which deals partly with LG Pad 7: http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995 People there might be able to help you out.
Good luck!
Hello. My tablet ( V400 LG G Pad 7.0) is a little bit slower on original ROM (Android 5) so I tried to install a custom rom (CM). I rooted the tablet, and when I tried to install another .img file using a software, the tablet is remain in secure boot problem or something like that and the only way that bring the tablet back is restore using LG Software. Ok, so I tried to downgrade to Android Kit Kat (4.4 original ROM). I did everything using LGFlashTool2014 but the tablet is looping in LG logo, restarting over and over again and I have to go back at 5.0 original ROM. Can someone help me to install CM ? Any ideeas?
Even worse
AndreyStyle007 said:
Hello. My tablet ( V400 LG G Pad 7.0) is a little bit slower on original ROM (Android 5) so I tried to install a custom rom (CM). I rooted the tablet, and when I tried to install another .img file using a software, the tablet is remain in secure boot problem or something like that and the only way that bring the tablet back is restore using LG Software. Ok, so I tried to downgrade to Android Kit Kat (4.4 original ROM). I did everything using LGFlashTool2014 but the tablet is looping in LG logo, restarting over and over again and I have to go back at 5.0 original ROM. Can someone help me to install CM ? Any ideeas?
Click to expand...
Click to collapse
Same here expect that my LGFlashTool went unresponsive at 80%, stopped time counter, so I had to restart my v400 with power+volulme down. Since then v400 is unresponsive to any button combination or usb plug in, it only vibrates sometime. Device manager shows it a COM port. Do you have any idea what to do?
trewallier said:
Same here expect that my LGFlashTool went unresponsive at 80%, stopped time counter, so I had to restart my v400 with power+volulme down. Since then v400 is unresponsive to any button combination or usb plug in, it only vibrates sometime. Device manager shows it a COM port. Do you have any idea what to do?
Click to expand...
Click to collapse
Yep. I know how to fix this problem (I already had this before). If you still interest just leave me a pm so we can talk in private. Regards, Andrey
AndreyStyle007 said:
Yep. I know how to fix this problem (I already had this before). If you still interest just leave me a pm so we can talk in private. Regards, Andrey
Click to expand...
Click to collapse
Hello Andrey,
I have this problem now and don't know how to fix. Do you still remember the procedure.
Thanks in advance
Hi All,
My ZE550KL has booted to Fastboot ROM mode and is not coming out of it.
My zenfone 2 laser with the following minimal config is given
Model Number: ASUS_Z00LD
Software information: WW_1.16.40.763_20151201 initially, later different patches available in the
HelpDesk of Asus site, but to no use.
I've applied Factory Data Reset option, Hard reset, there is no option to go for the safe mode.
What do you guys think that may fix the issue?
Thanks in advance.
srkraidu said:
Hi All,
My ZE550KL has booted to Fastboot ROM mode and is not coming out of it.
My zenfone 2 laser with the following minimal config is given
Model Number: ASUS_Z00LD
Software information: WW_1.16.40.763_20151201 initially, later different patches available in the
HelpDesk of Asus site, but to no use.
I've applied Factory Data Reset option, Hard reset, there is no option to go for the safe mode.
What do you guys think that may fix the issue?
Thanks in advance.
Click to expand...
Click to collapse
Have you tried reinstalling the original rom?
As you said in the other post of the WiFi problem and now this ... well, it seems that your device may be defective , it would be advisable to contact a technical service
C0r3xMoon said:
Have you tried reinstalling the original rom?
As you said in the other post of the WiFi problem and now this ... well, it seems that your device may be defective , it would be advisable to contact a technical service
Click to expand...
Click to collapse
Hard to say whether the original ROM was applied, as the device was able to boot on pressing the power button and volume down, the recovery mode and all the ROMs were applied one by one, lest it could bring to normal.
This device is different from the one with wifi device issue.
Hi guys,
from last one week I was experimenting new roms for my oneplus one. In order to install oreo rom, someone suggested to update twrp recovery to 3.2 wherein I was using 3.0.1. So I did!!
First i tried with official twrp app it showed successful but I was not able to boot into recovery mode. It got stuck in oneplus logo. But it was booting fine to os (oxygen os).
To fix this issue I found one post on XDA to run FIRSTAID.BAT file and I did.. Now, my phone is not booting at all. It was worst decision of my life to follow that monkey.
I feel my phone is soft bricked and not even getting detected in pc.
CAN SOMEONE PLEASE HELP!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
rohitgothwal said:
Hi guys,
from last one week I was experimenting new roms for my oneplus one. In order to install oreo rom, someone suggested to update twrp recovery to 3.2 wherein I was using 3.0.1. So I did!!
First i tried with official twrp app it showed successful but I was not able to boot into recovery mode. It got stuck in oneplus logo. But it was booting fine to os (oxygen os).
To fix this issue I found one post on XDA to run FIRSTAID.BAT file and I did.. Now, my phone is not booting at all. It was worst decision of my life to follow that monkey.
I feel my phone is soft bricked and not even getting detected in pc.
CAN SOMEONE PLEASE HELP!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Can you boot into fastboot or twrp?