My problem is that I can't flash my firmware on my Cubot X18 Plus in either the SP Flash Tool and in the Miracle Thunder.
After I have downloaded different kinds of firmware packages especially for the Cubot X18 Plus, I tried to flash it in SP Flash Tool.
And that didn't work out and got me an error like "ERROR STATUS_DA_HASH_MISMATCH (0xC0070004)".
I know that my bootloader is still locked and that the "Development Options" ain't activated are. Sadly I can't change it.
And in Miracle Thunder I get the message "BootData ERR (change port set)" when I try to connect the phone with the volume up
and putting in the USB-cable in my PC. What's wrong, hopefully you could help me out with this issue.
The problem has been solved.
Related
ok i've got a note 4 clone i occidentally bricked it when i tried to flash an miui rom zip in cwm. now It wont turn on anymore ,but it gets detected at the device manager (Mtk usb v com) although it keeps connects and disconnects, what i have is a cwm backup i cant get spft to download the cwm backup i also dont have a scatter file i tried to load an mtk scatter file for the mtk chip 6572 didn't work either spft says there is a mismatch and sometimes DRAM FAIl error messages any ideas?
kinzy2004 said:
ok i've got a note 4 clone i occidentally bricked it when i tried to flash an miui rom zip in cwm. now It wont turn on anymore ,but it gets detected at the device manager (Mtk usb v com) although it keeps connects and disconnects, what i have is a cwm backup i cant get spft to download the cwm backup i also dont have a scatter file i tried to load an mtk scatter file for the mtk chip 6572 didn't work either spft says there is a mismatch and sometimes DRAM FAIl error messages any ideas?
Click to expand...
Click to collapse
Hello, this is herna from XDA Assist.
I´m sorry for what you faced with your device, but this is the main problem about buying and using clone devices. I can´t help with that since there a ton of clones and most of clones use to be very poor devices.
My suggestion is you to try to reach whoever sent you the device or the company which created it, or try to search on Google for someone who also has the device.
As a personal suggestion, if you are out of money, next time you buy a device, and wanna custom it and play with it like you tried with your device, try to reach some Motorola or "most famous" device, where you will have a bigger development under it, and you will have solutions for almost all the troubles.
I wish you get back your device on working, and also wish you to spend a nice weekend.
Hello,
My problem is that my UMI Super lcd is glitching due to LCD Replacement and I'm trying to flash an updated version that allegedly fix the problem.
I have the ROM and I have the SP Flash Tool but I can not make the SP Flash Tool to start flashing the ROM to the phone I already try a bunch of drivers for the phone (MTK6755) and I get a warning messagem pluging the phone and then it seems conected but the flashing never start I already try Disable Driver Signature Enforcement but I get the same problem over and over again. SP FLash Tool don't even give me an error.
(Printscreen of my Device Managment when phone is booting) https://s24.postimg.org/eid6fk5o5/Sem_T_tulo.jpg
Hope you can help me best regards,
skinvic23
Hi there and welcome to assist,
Here is all you need for your device:
Umi Super Guide [Firmwares, ROMs, Kernel, Root, Recovery] New OTA v3.02_20161121
You'll have to create an account to post in the main forums if you have any other questions.
Good luck
Ok, i have a doogee x5 pro phone and i tried to root it by flashing twrp recovery using sp flash tools. While flashing i got the error "PMT Changed for the rom it must be download". So i did a small research on internet and i found out that i needed to format everything except bootloader. This succeded. So after that i tried to install the firmware with this succeding to. Unfortunately the time i tried to turn phone on it was dead. SP Flash Tools wont detect it anymore. Please help me cause the phone is not mine and its brand new! I can rate my self as moderate android user. :crying:
i think i have a bigger problem... I downloaded a stock rom for doogee max pro(cause i just realised it wasnt just pro it was max pro) and it didnt seem to be recognised again. Any help would be appreciated. I constantly keep trying to raise it from the deads. Thanks!
Ap0s said:
i think i have a bigger problem... I downloaded a stock rom for doogee max pro(cause i just realised it wasnt just pro it was max pro) and it didnt seem to be recognised again. Any help would be appreciated. I constantly keep trying to raise it from the deads. Thanks!
Click to expand...
Click to collapse
On mtk devices a preloader is independently installed, it should be almost impossible to destroy, I owned a x5 pro and had best success to flash it with sp flash by taking out the battery, press flash button and plug it in...
The second huge issue I see is when you used the specific flash tool format option you very, very likely killed the nvram partition which contained the imei, so you'll have to fix this too by generating a new one and using mtk engineer mode which is well described and to find on Google..
But let's go step by step. Check without battery, or if it's a non replaceable you'll need find the reset button..
i have tried before without battery and i tried just now but nothing. Its very weird it was detected before and now no in same and another machine. I am pretty confused and stressed. Hope i didnt do any physical damage.. :crying:. THANKS!
starting to get pretty stressed omg! and is there a difference between MT6737M and MT6737?
i came to the point im starting to lose my mind... tried everything i could, i have 5 days left to repair this phone and i dont wanna pay 85 euros for this. SP Flash Tools wont detect the phone. Tried almost 5 different scatter files,2 different PCs and different mtk drivers. Im losing my mind already
UPDATE: I almost fixed it! I had flashed wrong preloader so phone wasn't recognized by SP Flash Tool. I fixed preloaded with a little trick from here: link. After that i flashed stock rom downloaded from doogee.cc but phone will not boot resulting in a total black screen. When i hot Power + Vol Up it takes me to another screen:
Select Boot Mode:
Recovery
Bootloader
Normal
Doesn't matter which boot mode i choose i just get a total black screen which means i get nothing. Idk what is happening! Any further help would be appreciated! I constantly try to bring it back working with little success and small improvements.
Last UPDATE: FIXED my phone had no juice left inside so couldnt complete boot proccess. Now its all good running Btw someone must pin this META trick link i send on my previous post cause im sure more people out there have preloader issues!!! Thank you everyone!!
Sam Nakamura said:
On mtk devices a preloader is independently installed, it should be almost impossible to destroy, I owned a x5 pro and had best success to flash it with sp flash by taking out the battery, press flash button and plug it in...
The second huge issue I see is when you used the specific flash tool format option you very, very likely killed the nvram partition which contained the imei, so you'll have to fix this too by generating a new one and using mtk engineer mode which is well described and to find on Google..
But let's go step by step. Check without battery, or if it's a non replaceable you'll need find the reset button..
Click to expand...
Click to collapse
And yes i couldnt flash it with battery only with!
Hi I have a LG Sp200 (Sprint) that I cross-flashed a LG K8 (2018) KDZ using LGUP and everything was working fine until I attempted to root the phone by flashing a LG m250DS KDZ. Before flashing the final kdz that bricked my phone, I did make a backup by dumping my firmware using LGUP but I'm not sure how to flash them since my phone is completely dead (no download mode / recovery / boot) The only thing my phone does is show up as LGE mobile serial port, LGE mobile modem port, and MTK usb port. If anyone has any idea or advise on how to get this phone back up it would be greatly appreciated. Thanks
send dump fw
kings1988 said:
hi i have a lg sp200 (sprint) that i cross-flashed a lg k8 (2018) kdz using lgup and everything was working fine until i attempted to root the phone by flashing a lg m250ds kdz. Before flashing the final kdz that bricked my phone, i did make a backup by dumping my firmware using lgup but i'm not sure how to flash them since my phone is completely dead (no download mode / recovery / boot) the only thing my phone does is show up as lge mobile serial port, lge mobile modem port, and mtk usb port. If anyone has any idea or advise on how to get this phone back up it would be greatly appreciated. Thanks
Click to expand...
Click to collapse
could you send me copy of the dumped fw?
never another mediatec
anyone gotta fix...i flashed wrong as well on my sp200....ive spent hours trying to use the sp flash tool with no avail..i cant come up with a good scatter file and i keep getting brom error 006003 ....only recognized on pc for like 3 seconds then nothing..help
same situation here ..
no SP FLASH TOOL firmware , no scatter , no AUTH FILE
Sp200 not bricked?
Please some should kindly help me.. I flashed SP200 with K8 rom, wanting to unlock it, but now wen you on the Sp200 it will show K8+ logo n then move to black screen where"[LGE] [Recovery] [OP Image] op_status: 0 Supported API: 3" keep popping at the base of the screen.
I will love to hear from you soon..
Thanks
Please Help Me!
I flashed my device with wrong TWRP on Infinix Note 7, after that I tried to flash the original firmware of the mobile from SP FLASH TOOL, I always encounter the problem "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)", I've tried by pressing the top volume and power button, the down volume button, both buttons and power, only power. But still always get the problem "BROM ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Maybe someone can help me with my problem, Because I'm a beginner in this.
Thanks!
Tech.
Solution: Found the solution after 6 months, and created a thread. Solution is explained there in detail: Infinix Bootloop Fix
Look inside here:
List of sp flash tool error codes, meanings & how to fix (solution)
Smart Phone Flash Tool also known as SP Flash Tool is a Desktop application used to flash firmware to Mediatek (MTK) Android devices. Its a pretty easy tool to use but you're bound to encounter one er
forum.hovatek.com
TechySkills said:
Please Help Me!
I flashed my device with wrong TWRP on Infinix Note 7, after that I tried to flash the original firmware of the mobile from SP FLASH TOOL, I always encounter the problem "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)", I've tried by pressing the top volume and power button, the down volume button, both buttons and power, only power. But still always get the problem "BROM ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Maybe someone can help me with my problem, Because I'm a beginner in this.
Thanks!
Tech.
Click to expand...
Click to collapse
Look for bypass utility and its instructions. It will help beat this error